[Q] HTC Desire Bootloop & unable to connect to USB - Desire Q&A, Help & Troubleshooting

Hey,
unfortunately, I cannot go through the HTC logo at the beginning. Therefore, I wanted to flash a new RUU, but I am not able to connect my phone to the PC. When I am entering in the Fastboot menu and connect it to the PC, "Fastboot USB" appears only a few second and then "USB" disapears.(HTC Sync and Drivers are installed). When I am trying to find the Phone with the command ADB devices, there aren't listed any devices. Furthermore, when I am entering in the HBoot, it appears loading ...[PB99DIAG.zip], but then it freeze.
For your info this is my phone:
-Revolutionary-
BRAAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Thankful for any advices!!!
Istvan

I see that you used Revolutionary to s-off the phone. Do you have a custom recovery installed?

chromium96 said:
I see that you used Revolutionary to s-off the phone. Do you have a custom recovery installed?
Click to expand...
Click to collapse
yes I have ClockwordMod, but I am unable to enter in the recovery menu...

istvan888 said:
yes I have ClockwordMod, but I am unable to enter in the recovery menu...
Click to expand...
Click to collapse
Can you get into fastboot mode by holding power + back?

chromium96 said:
Can you get into fastboot mode by holding power + back?
Click to expand...
Click to collapse
Yes, I can..

istvan888 said:
Yes, I can..
Click to expand...
Click to collapse
Download the 4ext recovery img from here. (Its inside of the zip).
Boot the phone into fastboot (back + power)
Run "fastboot boot recovery.img". The phone should boot into the recovery, and from there you can do a full wipe and flash a rom.

I downloaded the file and I ran the recovery.img with the command: "adb fastboot boot recovery.img" but nothing happend, because the PC does not recognized the phone. Did I everything right or should I run this command differently and not with the adb tool?
Thank You

istvan888 said:
I downloaded the file and I ran the recovery.img with the command: "adb fastboot boot recovery.img" but nothing happend, because the PC does not recognized the phone. Did I everything right or should I run this command differently and not with the adb tool?
Thank You
Click to expand...
Click to collapse
You arent supposed to put adb in front of the command. Do it like i said in my post above. Also try "fastboot devices" before that command to see if it recognizes it. Adb doesnt work in fastboot.

chromium96 said:
You arent supposed to put adb in front of the command. Do it like i said in my post above. Also try "fastboot devices" before that command to see if it recognizes it. Adb doesnt work in fastboot.
Click to expand...
Click to collapse
ah ok..
now there is written "< waiting for devices >"
same for fastboot devices....

istvan888 said:
ah ok..
now there is written "< waiting for devices >"
same for fastboot devices....
Click to expand...
Click to collapse
You are in fastboot mode on the phone right?
Try installing these on your pc.

the bbydern
chromium96 said:
You are in fastboot mode on the phone right?
Try installing these on your pc.
Click to expand...
Click to collapse
thank you for the link. I installed now these drivers, but nothing changed.
when i connect the phone with the PC it appears shortly FASTBOOT USB but than USB disapears. and therefore there is still waiing for devices...

Related

[Q] many problems

Hello,
my HTC desire has been rooted for like 8 months or so, with Oxygen 2.3.2 ROM installed. Yesterday i had my first problem, my apps began to freeze, and it ended up that my hole phone were froozen. I pulled my battery in and out, nothing happened.
I went into recovery and made a factoery reset, and wiped everything i could (i have read, that it was a good idea) and when i turned my phone up again, i realised that i had deleted my ROM on the phone...
So again... i went in to recovery and tryed to flash my ROM again, but i ran into a problem:
Code:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:Can't mount /sdcard
after i googled and tryed for like an hour and a half, i got it fixed with
Code:
cd C:\android-sdk-windows\platform-tools
fastboot oem enableqxdm 0
fastboot oem eraseconfig
and as i remember i took my batteri out again, and placed my memery-card into my computer, moved my ROM (oxygen 2.3.2) over again. So i tryed to get into recovery, but now it wont get in there, after i press the POWER-button on "Recovery" it just stocks on the HTC load screen, i left it that way the hole night, and when i woke up, nothing was happened...
i pulled my battery out, and now i got some problems just booting up to fastboot/hboot to.
so the problems now:
problems getting into RECORVERY
Sometimes problems booting to HBOOT/FASTBOOT
If you need any information, please tell me so
PS: Im sorry if my english is kind of bad
You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App
according to....
EvertorN said:
You should try flashing a new recovery image via fastboot once you get there. That worked for me when i couldnt enter recovery.
Sent from my HTC Runnymede using XDA App
Click to expand...
Click to collapse
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way
magnuskahr said:
according to: theunlockr.com/2009/10/15/how-to-flash-a-new-recovery-image-if-you-are-already-rooted i need to get into the phone and download an app, and i dont got a ROM installed, i kind of deleted it in a way
Click to expand...
Click to collapse
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!
USB functions are working? (Mount/debuging)
alexei_kom said:
I assume you are S-OFFed so just download a recovery.img file of your recovery, boot into fastboot and flash via fastboot utility your recovery.img file like 'fastboot flash recovery path\to\recovery.img'
Goodluck!
Click to expand...
Click to collapse
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Click to expand...
Click to collapse
name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
i dont remember, im in school and was stupid enough not to take the desire with me, i will test later when i come home
What is the hboot version?
name.vic said:
What is the hboot version?
Click to expand...
Click to collapse
Again, when i come home i will tjeck it
so in about 4 hours
My freind got the Desire too, and it's as old as mine, and we rooted our phones from the same tutorial.. so i gesh we got the same hboot version??
here is his hboot (as i remember, i got the same) HBOOT-0.93.0001
magnuskahr said:
I'm S-ON, will this help:?
http://forum.xda-developers.com/showthread.php?t=1275632
Click to expand...
Click to collapse
Are you sure you are S-ON? Because you can't perform these
fastboot oem enableqxdm 0
fastboot oem eraseconfig
Click to expand...
Click to collapse
if you are S-ON...
Post here your phone specs while in hboot...
last i checked i was on S-ON, i dont know if that were those commands which helped me (but it think it was)
but i will make sure about it, when i get home
now writing what is on the fastboot screen:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYN0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
FASTBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
name.vic said:
USB functions are working? (Mount/debuging)
Click to expand...
Click to collapse
My pc is making a sound when i connect it, but it wont find the hdd, but i can run
Code:
fastboot oem boot
and the phone boots and stucks and the android-skatbording-screen
i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?
magnuskahr said:
i just ran
Code:
fastboot reboot
the phone shut down, and i cant turn it on... any ideas?
Click to expand...
Click to collapse
SLCD brick?
Try to pull the battery, power on + back (this will get you into fastboot), wait about 10-20 seconds, then connect it to usb. In fastboot utility type 'fastboot devices' and see if it detects your phone. If it does, run an RUU.
Jep i tryed pull the battery out, i can still not turn it on
magnuskahr said:
Jep i tryed pull the battery out, i can still not turn it on
Click to expand...
Click to collapse
If you are SLCD bricked you won't see anything on your screen. Read the previous post I wrote...
i guess that "fastboot utility" is cmd right??
if that so, nothing happend

[Q] Fastboot not recognized?

Dear all,
After my phone was stuck in a bootloop i've been trying to reflash the recovery which i'm not able to access.
I have used revolutionary and have been using MIUI for a while, further details:
Bravo PVT1 SHIP S-OFF
HBOOT-6.93.1002
I'm trying to fix this on my moms pc and I notice there's some problems with the adb/fastboot since it gives me an error of a missing AdbWinApi.dll when trying to flash the recovery from android-sdk/tools.
However, the error does not appear when I run fastboot from \platform-tools. Could that be correct? If I do, the command box is waiting for the device and seems to be stuck there. when using the command adb devices, my desire is not listed.
What am I doing wrong here? Thnx!
and fastboot drivers installed?
download here
phone must be in fastboot (power+back button)
try: fastboot devices
fastboot flash recovery recovery.img
recovery.img= path/filename of your recovery
Can't access recovery after flash with fastboot
Awesome! thnx I had been installing drivers, but apparently the right one wasn't there.
Unfortunately, next problem... (is it ok to ask it here?) I've flashed the recovery, but the bootloop still exist. Is the S-on option of bortaks guide safe to try next? or are there other (better) alternatives?
edit: never mind! the ruu indeed worked pfieuw... thnx for the help!
glad to hear that, enjoy
i cant see my device with adb on linux.
last time i had flash the hboot from the phone!
i use kubuntu 12.04 with 3.4 kernel.
can you give me any help?
adb works in custom recovery/rom with debugging on, fastboot command in fastboot mode (power +back button to power on phone or reboot to bootloader from custom rom with APM)

[Q]Cant check the hboot version

When i use the command fastboot oem readcid it writes "waiting for device" and nothing happends...
why?
Just reboot into fastboot mode and you will see hboot version on the top .
VodkaPlease said:
When i use the command fastboot oem readcid it writes "waiting for device" and nothing happends...
why?
Click to expand...
Click to collapse
Are you in fastboot mode?
However that command gives you the CID and not the HBOOT
I went to fastboot mode and then did the command again still "waiting for device" and nothing happends and then i get a windows message that says the driver unsuccessful installed
VodkaPlease said:
I went to fastboot mode and then did the command again still "waiting for device" and nothing happends and then i get a windows message that says the driver unsuccessful installed
Click to expand...
Click to collapse
install HTC Drivers and check again
How to install is there a guide or something
VodkaPlease said:
How to install is there a guide or something
Click to expand...
Click to collapse
it is just a simple .exe to run on Windows, search for it
If you are in fastboot mode you should see which hboot version you are on, therefore you are not in fastboot mode. Push power and volume down simultanously. You then should be in the bootloader and see which hboot you have.

[Q] HTC One X (HELP)

Please Help,
I think my cousin has bricked my phone, I have tried everything and the phone will die soon as it wont switch offf.
Basically my phone has rooted and also the bootscreen unlocked, now my cousin didn't make a backup of my initial stock rom. so I am kinda stuck.
When I put the phone into boot via Power Button and Down Volume its comes to the white boot screen. When I Fastboot USB mode it says "SD Checking, Failed to open usb master", so how can i put this stock rom I found if my pc can't even detect the phone storage.
When I also go into my ClockworkRecovery and go into Mounts and Storage Menu > Mount USB storage, I get "unable to ums lunfile (no usch file or........ I thought maybe I could get the pc to recognize the phone sotrage via that way so I can put a ROM on the phone.
Phone has no ROM on it atm, I am slowly giving up.
update to the latest cwm or twrp then try again
---------- Post added at 03:34 AM ---------- Previous post was at 03:24 AM ----------
oh and and usb master mode thing is because you have the cable plugged in when starting bootloader. pull usb cable out before starting bootloader and plug it back in when it loads
How do I update the CWM with no OS installed
Divincus said:
How do I update the CWM with no OS installed
Click to expand...
Click to collapse
I think it is beyond being fixed my friend, when I power up the phone without the cable then I put it in once is have pressed the power key for the fastboot, the phone is still not detected. when the cable is plugged in on the fastboot it shows "fastboot USB" so it must be doing something?
Is there anyway someone would be really kind and use a voip and direct me or is the phone just totally dead now?
Ok, you can get into bootloader so your phone is not bricked. You are rooted, correct ?
You have a fastboot folder on your PC with the necessary files in it ?
alextheg said:
Ok, you can get into bootloader so your phone is not bricked. You are rooted, correct ?
You have a fastboot folder on your PC with the necessary files in it ?
Click to expand...
Click to collapse
Here is whats on the screen 1st.
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1.39.0000
CPLD-None
MICROP-None
RADIO-5. 1204 .164. 38H
Emmc bootmode: Disabled
Cpu bootmode Disabled
HW Secure boot: Enabled
Modem Path OFF
FASTBOOT
REBOOT
REBOOT BOOT LOADER
POWER DOWN
Yes I made one on my desktop with all the adb files ect from the SDK download.
Yes getting in the HBOOT is no problem at all, thats when if the usb cable is plugged in it says failed to open master used.
So I press the power to select FASTBOOT and insert the usb it then changes at the top FASTBOOT USB?
Is that a good sign
Divincus said:
Here is whats on the screen 1st.
ENDEAVORU PVT SHIP S-ON RL
HBOOT - 1.39.0000
CPLD-None
MICROP-None
RADIO-5. 1204 .164. 38H
Emmc bootmode: Disabled
Cpu bootmode Disabled
HW Secure boot: Enabled
Modem Path OFF
FASTBOOT
REBOOT
REBOOT BOOT LOADER
POWER DOWN
Yes I made one on my desktop with all the adb files ect from the SDK download.
Yes getting in the HBOOT is no problem at all, thats when if the usb cable is plugged in it says failed to open master used.
So I press the power to select FASTBOOT and insert the usb it then changes at the top FASTBOOT USB?
Is that a good sign
Click to expand...
Click to collapse
yes that is good, and from "fastboot usb" is where you install a newer cwm. get it from here>>>>>http://forum.xda-developers.com/showthread.php?t=2240646 rename the file "recovery" and put it in your fastboot folder, then install it by typing in command window "fastboot flash recovery recovery.img" then install your rom or stock nandroid that I linked for you earlier
same problem
Hi I have HTC ONE X after custom rom has lost imei number, bootloader relocked, android probably deleted and can't connect like normal with Laptop "UNKNOWN DEVICE" becouse all identification numers are 0, USB MASS Storage unavailable
Any ideas for bring him back?
Make sure you are in the "fastboot" folder that is on your desktop. In other words, the fastboot folder window is highlighted.
Hold the "shift" key on your keyboard and at the same time right click on empty space in the fastboot folder. Now you will get a menu, click on "Open command prompt here".
You should now have a fastboot terminal window and you can send commands to your phone using fastboot.
As "nogotaclue", said download ClockworkMod Recovery from Here . Put the downloaded recovery image in your fastboot folder. I would rename the downloaded recovery to "recovery_cwm". I do this because I find it easier to distinguish between recoveries that way.
Now go into your fastboot terminal window and type " fastboot flash recovery recovery_cwm.img " without the quote marks and then hit "enter".
Once you get a message saying that it succeeded type
" fastboot erase cache " hit "enter"
Now power off your phone reboot into bootloader and select recovery. If all is well you will be looking at Clockwork mod recovery 5.8.4.0.
Now you just need to get a ROM or a nandroid backup and you should be good to go....
nogotaclue said:
yes that is good, and from "fastboot usb" is where you install a newer cwm. get it from here>>>>>http://forum.xda-developers.com/showthread.php?t=2240646 rename the file "recovery" and put it in your fastboot folder, then install it by typing in command window "fastboot flash recovery recovery.img" then install your rom or stock nandroid that I linked for you earlier
Click to expand...
Click to collapse
I'll try that when I tried to adb devices it would not detect my phone at all, so I should download a new cwm go into the fast boot folder, do the cmd and point it to the cwm image?
MGOneX said:
Hi I have HTC ONE X after custom rom has lost imei number, bootloader relocked, android probably deleted and can't connect like normal with Laptop "UNKNOWN DEVICE" becouse all identification numers are 0, USB MASS Storage unavailable
Any ideas for bring him back?
Click to expand...
Click to collapse
Hold power and volume down button, keep holding them until bootloader screen appears.
Connect to your pc via fastboot usb.
Flash custom recovery
Flash Boot image for the rom you want
Erase cache
Install rom via recovery
Divincus said:
I'll try that when I tried to adb devices it would not detect my phone at all, so I should download a new cwm go into the fast boot folder, do the cmd and point it to the cwm image?
Click to expand...
Click to collapse
Correct, also make sure you have the latest drivers for your device. Or install HTC sync
Sent from my HTC One X using XDA Premium 4 mobile app
alextheg said:
Make sure you are in the "fastboot" folder that is on your desktop. In other words, the fastboot folder window is highlighted.
Hold the "shift" key on your keyboard and at the same time right click on empty space in the fastboot folder. Now you will get a menu, click on "Open command prompt here".
You should now have a fastboot terminal window and you can send commands to your phone using fastboot.
As "nogotaclue", said download ClockworkMod Recovery from Here . Put the downloaded recovery image in your fastboot folder. I would rename the downloaded recovery to "recovery_cwm". I do this because I find it easier to distinguish between recoveries that way.
Now go into your fastboot terminal window and type " fastboot flash recovery recovery_cwm.img " without the quote marks and then hit "enter".
Once you get a message saying that it succeeded type
" fastboot erase cache " hit "enter"
Now power off your phone reboot into bootloader and select recovery. If all is well you will be looking at Clockwork mod recovery 5.8.4.0.
Now you just need to get a ROM or a nandroid backup and you should be good to go....
Click to expand...
Click to collapse
How come then in the current CWM I have, I get the mesagunable to ums lunfile
I do not know why and I would not concern myself with it either.
As long as you can boot into recovery and mount usb storage then you can place a rom or a nandroid on your device and get up and running again.
alextheg said:
I do not know why and I would not concern myself with it either.
As long as you can boot into recovery and mount usb storage then you can place a rom or a nandroid on your device and get up and running again.
Click to expand...
Click to collapse
Well I can enter the boot screen so thats a sign I guess, I am just waiting to charge the phone a little then do the process
So I'll recap what I have to do
1.)Hold Power Button + Bottom volume controller
2).Enters the BOOTSCREEN
3.)Scroll to FASTBOOT and press the power button on the FASTBOOT then (FASTBOOT USB) should appear
4.)Navigate to my C:\Users\Jon\Desktop\fastboot folder where fastboot.exe is and the recovery_cwm.img is
5.)Shift + Right Click open command prompt here blah blah
6.)In the CMD window type "fastboot flash recovery recovery_cwm.img"
7.)If succeeded, then the following "fastboot erase cache" hit enter power off phone.
8.)BOOTLOADER, recovery and CWM should be there.
I have a HTC One X Integra H3G before all this I was on the 4.1.0 version of the HTC, is there a link of H3G roms
Divincus said:
Well I can enter the boot screen so thats a sign I guess, I am just waiting to charge the phone a little then do the process
So I'll recap what I have to do
1.)Hold Power Button + Bottom volume controller
2).Enters the BOOTSCREEN
3.)Scroll to FASTBOOT and press the power button on the FASTBOOT then (FASTBOOT USB) should appear
4.)Navigate to my C:\Users\Jon\Desktop\fastboot folder where fastboot.exe is and the recovery_cwm.img is
5.)Shift + Right Click open command prompt here blah blah
6.)In the CMD window type "fastboot flash recovery recovery_cwm.img"
7.)If succeeded, then the following "fastboot erase cache" hit enter power off phone.
8.)BOOTLOADER, recovery and CWM should be there.
I have a HTC One X Integra H3G before all this I was on the 4.1.0 version of the HTC, is there a link of H3G roms
Click to expand...
Click to collapse
You are pretty much there. When you have confirmed that you can reboot into recovery, power off and then reboot into bootloader / fastboot usb and from the fastboot terminal window type " fastboot getvar main".
Also type "fastboot oem readcid"
Post the result of those commands please
alextheg said:
You are pretty much there. When you have confirmed that you can reboot into recovery, power off and then reboot into bootloader / fastboot usb and from the fastboot terminal window type " fastboot getvar main".
Post the result of that command please
Click to expand...
Click to collapse
All the processes worked upto the point where you told me to "fastboot getvar main"
Divincus said:
All the processes worked upto the point where you told me to "fastboot getvar main"
Click to expand...
Click to collapse
Did you power off the device and restart it in fastboot usb ?
Divincus said:
All the processes worked upto the point where you told me to "fastboot getvar main"
Click to expand...
Click to collapse
I am H3G_01 but as I said, getva is a unknown command, least we are getting somewhere and I really appreciate your help.
Divincus said:
I am H3G_01 but as I said, getva is a unknown command, least we are getting somewhere and I really appreciate your help.
Click to expand...
Click to collapse
You are most welcome.
In fastboot terminal type "fastboot getvar all" and post screen please

stuck on BOOT LOOP & cant get into recovery!

Hello guys.... so I flashed a rom about 6 months ago, and yesterday my phone died and when I put it on the charger it was stuck on boot loop. I tried to go into recovery but when I do it also goes into boot loop. I've also tried the ADB command, but it says "Adb is not recoznices as an internal or external commad operable program of bactch file" so i'm out of ideas right now..i can't really flash another rom if I can't get into recovery can anybody help me? thanks in advance...
jy_ventura said:
Hello guys.... so I flashed a rom about 6 months ago, and yesterday my phone died and when I put it on the charger it was stuck on boot loop. I tried to go into recovery but when I do it also goes into boot loop. I've also tried the ADB command, but it says "Adb is not recoznices as an internal or external commad operable program of bactch file" so i'm out of ideas right now..i can't really flash another rom if I can't get into recovery can anybody help me? thanks in advance...
Click to expand...
Click to collapse
In fastboot, you can only use fastboot commands. Choose fastboot from the HBOOT menu, and when connected to your computer, it should say "FASTBOOT USB." Then, you should be able to do a "fastboot devices," and your device should show up. Please provide the output of "fastboot getvar all" and we can better judge how to proceed.
Captain_Throwback said:
In fastboot, you can only use fastboot commands. Choose fastboot from the HBOOT menu, and when connected to your computer, it should say "FASTBOOT USB." Then, you should be able to do a "fastboot devices," and your device should show up. Please provide the output of "fastboot getvar all" and we can better judge how to proceed.
Click to expand...
Click to collapse
It says
***unlocked***
Supersonic evt3 ship s on
Hboot- 2.18.0001
Microp-041f
Touch panel-atmel224_16ab
Radio-2.15.00.12.19
jy_ventura said:
It says
***unlocked***
Supersonic evt3 ship s on
Hboot- 2.18.0001
Microp-041f
Touch panel-atmel224_16ab
Radio-2.15.00.12.19
Click to expand...
Click to collapse
That's not what I asked for, but it might be enough. You'll need to relock the device (fastboot oem lock) and then flash the 5.07.651.1 firmware.zip via RUU mode.
Here's the file you need to download, and place the file in the same folder on your computer from which you're running fastboot.
So, after relocking, at the command prompt reboot to RUU mode.
Code:
fastboot oem rebootRUU
Then flash the firmware zip.
Code:
fastboot flash zip firmware.zip
Once complete, the command prompt will come back, and you can reboot back to the bootloader.
Code:
fastboot reboot-bootloader
At this point, you will have the stock recovery, and hopefully it'll boot into it. So, when you get back to HBOOT, choose the "RECOVERY" option. If all is well, you'll get the red triangle with exclamation point, which is the stock recovery. Press both volume buttons and the power button at the same time to bring up the menu, and choose the option to reboot the device now. Hold the volume down button immediately after choosing to reboot so you can get back into HBOOT.
From there, you just have to unlock again, and then you should be able to flash a custom recovery.
Make sure you are running these commands from the folder with fastboot.exe in it. Otherwise they will give you the error you mentioned in your OP.
This may sound dumb but im having a problem relocking the device. My computer is not registing my phone.
Captain_Throwback said:
That's not what I asked for, but it might be enough. You'll need to relock the device (fastboot oem lock) and then flash the 5.07.651.1 firmware.zip via RUU mode.
Here's the file you need to download, and place the file in the same folder on your computer from which you're running fastboot.
So, after relocking, at the command prompt reboot to RUU mode.
Code:
fastboot oem rebootRUU
Then flash the firmware zip.
Code:
fastboot flash zip firmware.zip
Once complete, the command prompt will come back, and you can reboot back to the bootloader.
Code:
fastboot reboot-bootloader
At this point, you will have the stock recovery, and hopefully it'll boot into it. So, when you get back to HBOOT, choose the "RECOVERY" option. If all is well, you'll get the red triangle with exclamation point, which is the stock recovery. Press both volume buttons and the power button at the same time to bring up the menu, and choose the option to reboot the device now. Hold the volume down button immediately after choosing to reboot so you can get back into HBOOT.
From there, you just have to unlock again, and then you should be able to flash a custom recovery.
Make sure you are running these commands from the folder with fastboot.exe in it. Otherwise they will give you the error you mentioned in your OP.
Click to expand...
Click to collapse
jy_ventura said:
This may sound dumb but im having a problem relocking the device. My computer is not registing my phone.
Click to expand...
Click to collapse
Do you have the correct drivers installed (or any drivers)?
---------- Post added at 12:11 AM ---------- Previous post was at 12:07 AM ----------
These drivers should work: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
i have all drivers and i reinstalled just in case but i only get as far as it saying hboot usb plug on my phone but it doesnt pop up and open in my computer
Captain_Throwback said:
Do you have the correct drivers installed (or any drivers)?
---------- Post added at 12:11 AM ---------- Previous post was at 12:07 AM ----------
These drivers should work: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Click to expand...
Click to collapse
jy_ventura said:
i have all drivers and i reinstalled just in case but i only get as far as it saying hboot usb plug on my phone but it doesnt pop up and open in my computer
Click to expand...
Click to collapse
For the purposes of this exercise, you need to select "FASTBOOT". Once you select that, it should change from FASTBOOT to FASTBOOT USB if the drivers are installed correctly.
Nothing is supposed to open on your computer - I'm not sure what you mean by that. You have to open a command prompt, and navigate to the location of fastboot.exe on your computer, which you're presumably downloaded previously.
Im not sure what I meant either sorry its been a long day. So, okay I have the correct drivers because it does say FASTBOOT USB but when I try in that command i get an error message stating it's not recognize internal or external.
Captain_Throwback said:
For the purposes of this exercise, you need to select "FASTBOOT". Once you select that, it should change from FASTBOOT to FASTBOOT USB if the drivers are installed correctly.
Nothing is supposed to open on your computer - I'm not sure what you mean by that. You have to open a command prompt, and navigate to the location of fastboot.exe on your computer, which you're presumably downloaded previously.
Click to expand...
Click to collapse
jy_ventura said:
Im not sure what I meant either sorry its been a long day. So, okay I have the correct drivers because it does say FASTBOOT USB but when I try in that command i get an error message stating it's not recognize internal or external.
Click to expand...
Click to collapse
Again, you have to run the command from the folder with fastboot.exe in it. Are you doing that? Please provide a screenshot of the folder contents and the command prompt.
I dont think I am because this is literally what i have the phone plugged into my pc and then I have command prompt running.... so when you say i have to run the command from the folder...i guess i'm lost as in what folder since my phone is on the screen that says fastboot usb... sorry! noob completely!
Captain_Throwback said:
Again, you have to run the command from the folder with fastboot.exe in it. Are you doing that? Please provide a screenshot of the folder contents and the command prompt.
Click to expand...
Click to collapse
jy_ventura said:
I dont think I am because this is literally what i have the phone plugged into my pc and then I have command prompt running.... so when you say i have to run the command from the folder...i guess i'm lost as in what folder since my phone is on the screen that says fastboot usb... sorry! noob completely!
Click to expand...
Click to collapse
Have you downloaded fastboot to your computer?
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
You can download fastboot from here: https://www.htcdev.com/process/legal_fastboot_win
Wherever you save that is the folder you need to open the command prompt from, and where you need to put the firmware zip file.
no i havent....but i have it now... its done downloading now
Captain_Throwback said:
Have you downloaded fastboot to your computer?
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
You can download fastboot from here: https://www.htcdev.com/process/legal_fastboot_win
Wherever you save that is the folder you need to open the command prompt from, and where you need to put the firmware zip file.
Click to expand...
Click to collapse
So I downloaded it but I keep getting an error message that it cannot start due to adbwinapi.dll is missing. Ive reinstalled it a few times....im lost completely
Captain_Throwback said:
Have you downloaded fastboot to your computer?
---------- Post added at 12:57 AM ---------- Previous post was at 12:55 AM ----------
You can download fastboot from here: https://www.htcdev.com/process/legal_fastboot_win
Wherever you save that is the folder you need to open the command prompt from, and where you need to put the firmware zip file.
Click to expand...
Click to collapse
jy_ventura said:
So I downloaded it but I keep getting an error message that it cannot start due to adbwinapi.dll is missing. Ive reinstalled it a few times....im lost completely
Click to expand...
Click to collapse
You shouldn't be running anything related to adb. Just follow my instructions. Everything I said is for fastboot, not adb.
I really dont know what im doing wrong I downloaded the fastboot and then the filmware i put them both in one same folder and then when command prompt came up i got an error...idk what im doing wrong!
Captain_Throwback said:
You shouldn't be running anything related to adb. Just follow my instructions. Everything I said is for fastboot, not adb.
Click to expand...
Click to collapse
jy_ventura said:
I really dont know what im doing wrong I downloaded the fastboot and then the filmware i put them both in one same folder and then when command prompt came up i got an error...idk what im doing wrong!
Click to expand...
Click to collapse
What do you mean when the command prompt came up? I asked for screenshots for this reason. Difficult to be able to determine the issue if you don't provide enough information.
Okay back to the start, I have both files in one folder....do I extract?
Captain_Throwback said:
What do you mean when the command prompt came up? I asked for screenshots for this reason. Difficult to be able to determine the issue if you don't provide enough information.
Click to expand...
Click to collapse
jy_ventura said:
Okay back to the start, I have both files in one folder....do I extract?
Click to expand...
Click to collapse
Extract the fastboot zip.
Okay I extracted files now im here...
Do I run fastboot?
Captain_Throwback said:
Extract the fastboot zip.
Click to expand...
Click to collapse

Categories

Resources