Hey guys, I am having problem with my One X.. I bought new replaceable LCD screen and digitizer yesterday. I ve assembled it without any problems, even with connected LCD/digitizer and everything worked fine... But When I tried to screw the motherbord to the house frame, suddenly the brightness of LCD starts "blinking" (lowering and raising).. I think that this issue can cause lcd flex cable...
Can anybody tell me the voltage of this cable/connector or does anybody have any solution for this?
Thanks in advance
Edit: Found some article that says, it could be defective LCD Screen FPC Connector.. Can anybody agree?
Related
Hello,
It seems that flat cable which connects the slide-out screen is broken: the touch-screen doesn't work, and there's a white lines all over the screen while opening the device.
I've made a call to my local service center and they said that I need to change the whole touch screen because the cable is glued to it.
Is it right? Is there another way to fix the device rather paying $300 for a new screen?
i have also the same problem For my PDA2K , my flat cable which is comming from the screen under the slider is broken ,, half of the cable , i have the orange cable ,, is there any way to fix it
Thanks
i am facing a lcd problem in ma Touch Pro2 i.e LCD does not work. But the phone vibrates on turning ON. even i can listen startup sound. I think there is a strip issue i.e FPC Cable. does HTC FPC cable has a problem or there is a connection issue?
Thank you
so the off white tab that holds the pins in place broke off....and also some of the pins broke off. So im wondering if this is completely impossible to fix? is there anyway to rig the lcd screen to turn on still or am i screwed? btw it is the smaller flex cable version. i dont have a sprint upgrade for a good year and a half so im not trying to wait that long and my htc hero is getting quite annoying to use compared to my modded evo which was gloriously fast.
Hey did you ever get this fixed?? The same thing just happened to me...
A new digitizer for the Evo only costs $20-$30. Just buy one and replace it. Problem solved.
Hey,
It is possible to fix you just need a new lcd screen or digitizer here are some ebay links for them I am not sure what one you need..
http://www.ebay.com/itm/NEW-HTC-EVO...ultDomain_0&hash=item230a0125a2#ht_2253wt_752
http://www.ebay.com/itm/HTC-Evo-4G-...ultDomain_0&hash=item519bf4265e#ht_2188wt_944
But just replace it dont try to rig it or anything it will cause more damage then good.
I hope I helped If I did please hit the thanks button,
Stevo
I think he means the connector on his logic board broke which is hard to repair afaik
We are legion, for we are many
Hi, I recently changed my lcd+digitizer. It worked perfectly for 2-3 days. Now the backlight is gone. I have bought the 220 coil, some charging coils and a new lcd.
So, how do I change the coil. I have a soldering iron with a small tip, is that sufficient?? Is there any possibility, that it is the lcd that is faulty??
Kind regards,
JOAK0068
joak0068 said:
Hi, I recently changed my lcd+digitizer. It worked perfectly for 2-3 days. Now the backlight is gone. I have bought the 220 coil, some charging coils and a new lcd.
So, how do I change the coil. I have a soldering iron with a small tip, is that sufficient?? Is there any possibility, that it is the lcd that is faulty??
Kind regards,
JOAK0068
Click to expand...
Click to collapse
EDIT:
I tried another LCD today, still no backlight. Hm.. dows anyone know how to remove the metal "case" on top of the coils?
joak0068 said:
EDIT:
I tried another LCD today, still no backlight. Hm.. dows anyone know how to remove the metal "case" on top of the coils?
Click to expand...
Click to collapse
Fingernails worked for me! It just pops off, just start at one corner, and work your way around.
fix?
Hi was just wounding if you managed to sort this out with the soldering, having an issue with the dreaded black screen. lcd & digitizer working seems people have fixed this by replacing the 220 coil.
joak0068 said:
Hi, I recently changed my lcd+digitizer. It worked perfectly for 2-3 days. Now the backlight is gone. I have bought the 220 coil, some charging coils and a new lcd.
So, how do I change the coil. I have a soldering iron with a small tip, is that sufficient?? Is there any possibility, that it is the lcd that is faulty??
Kind regards,
JOAK0068
Click to expand...
Click to collapse
HI there,
Where did you buy the coil?
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Jaehyeok Koo said:
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Click to expand...
Click to collapse
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Bakisha said:
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Click to expand...
Click to collapse
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
RoboticBuddy said:
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Click to expand...
Click to collapse
If I ask for sending normal item without any problem again, should I send to seller the screen digitizer ?
Jaehyeok Koo said:
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
Click to expand...
Click to collapse
Well, you could open your Play and see if flex cable properly placed. Open slider and put that white plastic inside metal frame. Put back dpad part of phone back, but keep an eye on that white plastic, it have two holes in motherboard to go into, then screw those two screws on motherboard (so it will make flex cable plug in motherboard - look if jack is now properly inserted
Close it and try it.
If you again have problems with touchscreen, then you have two options. Replace flex or replace digitizer. It's hard to say wich is faulty...
Sent from my R800i using xda app-developers app