I got a good deal on a Captivate Glide on eBay - good overall condition, worked fine, but no battery, small crack in the battery door, and stiff volume keys. The volume keys don't have any give to them, really, like they're jammed into place. If I hold and press hard on one end the volume will start going up or down as it should, but I can't seem to boot into download mode like this, meaning I can't install CWM, root, flash kernels/roms, etc. Anyone have any ideas?
---
FEGuy said:
I got a good deal on a Captivate Glide on eBay - good overall condition, worked fine, but no battery, small crack in the battery door, and stiff volume keys. The volume keys don't have any give to them, really, like they're jammed into place. If I hold and press hard on one end the volume will start going up or down as it should, but I can't seem to boot into download mode like this, meaning I can't install CWM, root, flash kernels/roms, etc. Anyone have any ideas?
Click to expand...
Click to collapse
I dropped my phone and my volume key got stuck in the down position ..luckily it popped back into position when i fiddled with it and it worked again..
if you have a very tiny flathead screwdriver (very very very tiny) try and pry the volume rocker to the sides a bit and see if it lets go.
if not, ya take the phone apart ... either way, it's good practice to get several rubberized hard cases for your glide.
Why several? these things are so cheap because its a slider that I've found they break when I drop my phone at times. they're 3-4 dollars on ebay and you can get bundles with accessories screen covers etc. I always have a backup case for when I drop it.
Welcome to glide and g'luck!
Related
So i go my device about 3 weeks ago. last night i noticed the volume down button wasn't working, so i took off the battery cover and this is what i've found.
Theres a plastic piece that goes over the button and looks like the one for volume down as slid into the device, the volume up & PTT button's plastic cover looks to be going loose as well.. :/
I know i can take it into the device support center but they'll probably give me a refurbished device which i dont want. I payed for a new device, its fairly new and i should get a new device!
Anyone else experienced this?
ouch. it looks like your other buttons are a little broken too. how hard are you pressing those? ive had my tilt 2 for a month and a half and the buttons are still perfectly aligned and feel brand new.
Looking at my case and the vol/ptt buttons inside it doesn't even look like it'd be possible to push hard enough on the outside to cause that. However all three buttons do have the same internal plastic piece which is probably why the other buttons are going.
If you're under 30 days can't you return the device? I thought AT&T had a 30 day return period.
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
ohyeahar said:
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
Click to expand...
Click to collapse
I'm having that with mine right now actually, just started noticing it in the past week. I'll give your trick a shot, thanks!
so i got pretty drunk last night (almost like every night but thats a different story ) and i remember dropping my phone on the pavement. And just now i noticed the volume down button has fixed itself from the drop! haha
i tried manually moving the cover piece back over the button when it first broke and that didn't help. so i guess the solution is to drop your phone!
Not sure if this happened before I dropped it at Christmas or not... BUT...
My volume button is sticking out at the bottom. So the end that lowers the volume. It's all good up the top. Any ideas how I can, or where to get this, fixed. I'm in Sydney.
I opened the battery compartment to have a look, but there is a void sticker over one of the screws. So don't wanna go there unless its a guarantee fix.
Sent from my Desire HD using XDA App
Same problem here.. I can't find replacement part so I have ordered from ebay for shocking price for smallest piece is 19$ :S
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
kudoboi said:
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i think you're totally missing the point. lol
anyway, can't you just push it in? give it a lil force until it snaps back into place. let me know what happens.
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
o reverendo said:
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
Click to expand...
Click to collapse
André, i really don't think so...
I'm getting same trouble, the button works fine, but the down side (to decrease volume) is a little out, if compared with up side that stays closer to the frame, looks like a "seesaw"... i believe you got a hardware issue...
Sent from my Desire HD using XDA App
I have same design issue. Upper part of button (volume up) is more inside the phone and volume down part sticks a bit out.
Still buttons work as they should.
Sent from my Desire HD using XDA App
I don't exactly have same issue but close.
My volume rockers work, it's just they both are sunken to bottom and haven't that normal touch i've seen on other DHDs
Kindda nasty. Has anybody went to HTC to fix that? I'd love to know before sending... or not
yeah it seemed so for mine too.. but then i dotn have much problem with mine ..
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
arielc said:
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
Click to expand...
Click to collapse
Thanks a lot, this is what I was looking for. I may send it sometime during exams (where I'll miss it less )
Got kind of the same problem, my volume down button is not nearly as responsive as my volume up button.
Got the same problem, my volume down button is not nearly as responsive as my volume up button.
OMG the bottom voice button is so weak..I am afraid of mine now...
my volume button popped out, doesn't sit flush and keep catching.
Added some glue to keep it held down, need to fit a replacement! Anyone know how to?
+1
I have same issue with volume key, seems quite a common problem, surely covered by factory warranty?
Fixed my volume button
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.
Hey thanks if my breaks its gonna be useful!
Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.
search the forum, someone wrote how he fixed his button using a bit of superglue. it works like a charm. basically the volume rocker is held onto the phone with a rubber base. with time the rocker comes unglued from the rubber base. if you use something thin, like a toothpick or a small cutting knife you can insert a very small amount of glue between the 2 and glue them back together. just don't overdo it with the glue or you'll end up gluing the rocker to the body! i did it on mine and now it's as good as new
today i applied an XO skin and i applied the wet applicator only once and squeegeed the water out just like the instructions says and now for some reason, my power button has stopped working and sometimes it does work but it acts as if im holding down the power button and my power menu options pop up..... i bought this device unlocked from Expansys_USA and their customer service is done for the weekend....should i try putting it in rice?? im freaking out right now....this is not cheap, and i am seriously gonna be pissed if it was cuz of the XO....HELP.... :'(
How soon after applying the skin did you put your battery back in the device and try to turn it on?
Usually, you have to wait at least 24hours after applying a wet skin to have enough time for it to dry safely.
EP2008 said:
How soon after applying the skin did you put your battery back in the device and try to turn it on?
Usually, you have to wait at least 24hours after applying a wet skin to have enough time for it to dry safely.
Click to expand...
Click to collapse
well thats the thing...i hated how the screen protector looked so i took it off and got rid of it, and then i turned on the phone......it was fine for a while, and then it just stopped working.....i have no idea what Expansys's warranty is on their unlocked phones either
Simer03 said:
today i applied an XO skin and i applied the wet applicator only once and squeegeed the water out just like the instructions says and now for some reason, my power button has stopped working and sometimes it does work but it acts as if im holding down the power button and my power menu options pop up..... i bought this device unlocked from Expansys_USA and their customer service is done for the weekend....should i try putting it in rice?? im freaking out right now....this is not cheap, and i am seriously gonna be pissed if it was cuz of the XO....HELP.... :'(
Click to expand...
Click to collapse
This happened with my Captivate some time ago. I think it might have been from dropping it. The SAME EXACT thing happens when trying use the power button on the captivate. Sometimes it work fine for a few pushes, other times it will act like I held it down on a push, and sometimes when just holding it, it pops the power menu up. I think the contact inside the switch is busted and floating around. When it touches, it activates. Therefor, it can be activated by shaking the phone. I can replicate it on my Captivate.
Those buttons are pretty much tiny little switches on the PCB. They probably got water in them if they work sometimes, and then don't work - and sometimes seem stuck on.
You'd need to clean the switch with some contact cleaner of some kind... but you'd need to take apart your phone most likely. You don't really want to get that all in your phone, or on the screen. It might ruin the coating on the screen, or damage other stuff depending on what type of cleaner you used.
Luxferro said:
Those buttons are pretty much tiny little switches on the PCB. They probably got water in them if they work sometimes, and then don't work - and sometimes seem stuck on.
You'd need to clean the switch with some contact cleaner of some kind... but you'd need to take apart your phone most likely. You don't really want to get that all in your phone, or on the screen. It might ruin the coating on the screen, or damage other stuff depending on what type of cleaner you used.
Click to expand...
Click to collapse
Hopefully this fixes his. I still have a captivate with a non working power button. Cleaning it didn't help.
Sent from my Galaxy Nexus
it is easy to fix once you disassemble the housing you just pry open the power button and clean the contacts
http://www.youtube.com/watch?v=1WqajUcI_oU
at 1:56
you remove the black tape around the power button so you can see the contacts just clean them and you are good
bear in mind that you don't have to disassemble the boards like the video , just the housing
Thanks guys! I left it in rice overnight and now everything seems to be working perfect! Oh man....I was so scared! I bought this mofo unlocked! Its funny how when u actually try to protect it, it just ends up getting worse! I'm done with wet applies, I'm keeping it naked! Lol
Edit: its still doing the same thing again...spoke too soon......well kinda....its not doing it nearly as much
sent from my Nexus Prime
DynamicRam said:
it is easy to fix once you disassemble the housing you just pry open the power button and clean the contacts
http://www.youtube.com/watch?v=1WqajUcI_oU
at 1:56
you remove the black tape around the power button so you can see the contacts just clean them and you are good
bear in mind that you don't have to disassemble the boards like the video , just the housing
Click to expand...
Click to collapse
i will try this now!
Hi everybody,
i think my volume down button is broken.
Volume up works but the volume down is gone.
Have you got any suggestion about how i could repair or change it?
Thank you!
sberla54 said:
Hi everybody,
i think my volume down button is broken.
Volume up works but the volume down is gone.
Have you got any suggestion about how i could repair or change it?
Thank you!
Click to expand...
Click to collapse
It's a cheap fix AFAIK, should be a few $ in your local phone shop. It's quite a common problem for our DHD, Thankfully I rooted before I broke my volume rocker (been living without one for 5 months now).
Yes, you're right. I've found a couple of repair items + kit on eBay for a few bucks:
http://www.ebay.it/itm/100-Genuine-...K_Replacement_Parts_Tools&hash=item1e6bf145b0
http://www.ebay.it/itm/HTC-G10-Desi...K_Replacement_Parts_Tools&hash=item416ca2bcd4
http://www.ebay.it/itm/Original-Sid...747?pt=LH_DefaultDomain_0&hash=item43b707586b
By the way, i've also found this topic (where there is you, too): http://forum.xda-developers.com/showthread.php?t=915895
It suggests you can fix the problem without changing any hardware parts:
This way:
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.
Click to expand...
Click to collapse
or this way:
Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.
Click to expand...
Click to collapse
And then i found a disassembly howto video: http://www.youtube.com/watch?v=JfatoeWbMRk
I think that I need to put to work now
So my Pixel 2 XL fell out of my pocket on to carpet (thankfully) but when I picked it up I noticed the volume buttons were missing. My volume buttons had popped out of the phone but good thing I was able to find the piece and pop it back in. I think this is just a terrible design, the volume buttons are held in by only 2 small rubber clips. The fact that it popped out so easily makes me question the water resistance. I'm able to pull out the volume buttons if I pull the top using my fingernail. Not good. I went to Best Buy to try this on the display model and I was able to pull out the volume buttons also but it was slightly more difficult, I guess mine is just unlucky. The power button seems okay though. Anyone else encounter this?
Here's a link to some photos, scroll down there's a few
https://imgur.com/a/It0yP