Desire HD Volume Button Broken - Desire HD Q&A, Help & Troubleshooting

Not sure if this happened before I dropped it at Christmas or not... BUT...
My volume button is sticking out at the bottom. So the end that lowers the volume. It's all good up the top. Any ideas how I can, or where to get this, fixed. I'm in Sydney.
I opened the battery compartment to have a look, but there is a void sticker over one of the screws. So don't wanna go there unless its a guarantee fix.
Sent from my Desire HD using XDA App

Same problem here.. I can't find replacement part so I have ordered from ebay for shocking price for smallest piece is 19$ :S

thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App

kudoboi said:
thr r apps to control the volume in internal like mini info
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
i think you're totally missing the point. lol
anyway, can't you just push it in? give it a lil force until it snaps back into place. let me know what happens.

just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André

o reverendo said:
just noticed that I can increase volume on my DHD, but can't lower the volume. restarted it, thinking that it might be a sw bug, but it still doesn't work.
is this the issue you guys are experiencing?
hope it's easy to solve, since I'm in Brazil and bought the phone in Germany.
best regards
André
Click to expand...
Click to collapse
André, i really don't think so...
I'm getting same trouble, the button works fine, but the down side (to decrease volume) is a little out, if compared with up side that stays closer to the frame, looks like a "seesaw"... i believe you got a hardware issue...
Sent from my Desire HD using XDA App

I have same design issue. Upper part of button (volume up) is more inside the phone and volume down part sticks a bit out.
Still buttons work as they should.
Sent from my Desire HD using XDA App

I don't exactly have same issue but close.
My volume rockers work, it's just they both are sunken to bottom and haven't that normal touch i've seen on other DHDs
Kindda nasty. Has anybody went to HTC to fix that? I'd love to know before sending... or not

yeah it seemed so for mine too.. but then i dotn have much problem with mine ..

Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.

arielc said:
Had a similar problem for me within first 14 days of my contract, just sent it back and got a replacement under warranty with orange. Maybe HTC or your carrier can do the same thing.
Click to expand...
Click to collapse
Thanks a lot, this is what I was looking for. I may send it sometime during exams (where I'll miss it less )

Got kind of the same problem, my volume down button is not nearly as responsive as my volume up button.

Got the same problem, my volume down button is not nearly as responsive as my volume up button.

OMG the bottom voice button is so weak..I am afraid of mine now...

my volume button popped out, doesn't sit flush and keep catching.
Added some glue to keep it held down, need to fit a replacement! Anyone know how to?

+1
I have same issue with volume key, seems quite a common problem, surely covered by factory warranty?

Fixed my volume button
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.

Hey thanks if my breaks its gonna be useful!

Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.

search the forum, someone wrote how he fixed his button using a bit of superglue. it works like a charm. basically the volume rocker is held onto the phone with a rubber base. with time the rocker comes unglued from the rubber base. if you use something thin, like a toothpick or a small cutting knife you can insert a very small amount of glue between the 2 and glue them back together. just don't overdo it with the glue or you'll end up gluing the rocker to the body! i did it on mine and now it's as good as new

Related

Volume Button broke on 3 week old tilt2!?

So i go my device about 3 weeks ago. last night i noticed the volume down button wasn't working, so i took off the battery cover and this is what i've found.
Theres a plastic piece that goes over the button and looks like the one for volume down as slid into the device, the volume up & PTT button's plastic cover looks to be going loose as well.. :/
I know i can take it into the device support center but they'll probably give me a refurbished device which i dont want. I payed for a new device, its fairly new and i should get a new device!
Anyone else experienced this?
ouch. it looks like your other buttons are a little broken too. how hard are you pressing those? ive had my tilt 2 for a month and a half and the buttons are still perfectly aligned and feel brand new.
Looking at my case and the vol/ptt buttons inside it doesn't even look like it'd be possible to push hard enough on the outside to cause that. However all three buttons do have the same internal plastic piece which is probably why the other buttons are going.
If you're under 30 days can't you return the device? I thought AT&T had a 30 day return period.
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
ohyeahar said:
My volume buttons didn't break off like yours, but they did lose tactile feedback after a while. That is, when I press it, it doesn't click and bounce back as strong as before. They felt dull when I press them.
So what I did was put layers of scotch tape against the inside of the back cover where it would come in contact with the volume buttons. (Not sure if I explained it properly). Now my buttons work beautifully again.
If others are having this problem, please let me know. I can post some pics so that you can try.
Click to expand...
Click to collapse
I'm having that with mine right now actually, just started noticing it in the past week. I'll give your trick a shot, thanks!
so i got pretty drunk last night (almost like every night but thats a different story ) and i remember dropping my phone on the pavement. And just now i noticed the volume down button has fixed itself from the drop! haha
i tried manually moving the cover piece back over the button when it first broke and that didn't help. so i guess the solution is to drop your phone!

TPU Volume Button Fix

I tried that cardboard trick, it helps but makes your phone case look ugly or steak out on a weird way. Sometimes it will hit both buttons. This fix will solve all these problems.
Here's the best way to fix the tpu case Volume buttons. Very simple.
Simply take a very small razor blade or a exact o knife and cut around the volume up buton but leave a 1/8th of a inch pivot point in between The volume up and down button. Next do the same for the down button.
I hope this solves everyones problem with these nice TPU cases if I Help to you please send me a thanks....
Sent from my SPH-D710 using xda premium
I just did this and it works well. The volume keys are much easier to press.
Here are some pics of how far I cut.
The first image shows that the cut is not noticeable unless you look very closely under direct light.
http://i.imgur.com/iQwi7.jpg
The second image shows the cut depth.
http://i.imgur.com/29xnd.jpg
Thanks for posting pictures i didnt have time hope it helped
Sent from my SPH-D710 using xda premium
I used duct tape instead. Three strip layers inside the case made perfect contact w/ the volume rocker. Its working perfectly now!
I'm wondering if it would be a good idea to cut the plastic over the volume buttons off entirely...
Depends how fat your fingers are. The hole can get a little narrow, making it harder to press than the suggestion above.
IMO though wait a week before doing anything. I thought they were a little stiff at first, but I just pushed them in and out about 30 times with the case off and they loosened up. I actually prefer it stock now, as I don't press the volume buttons by accident when holding the phone in landscape mode and it isn't bad at all now that it has loosened up.
OMG! The duct tape works perfectly. Pain to cut it but now the buttons work like butter!!! Weeeee.

[Q] Help: Volume button problem

Hi guys,
I had a problem with my volume button. It simply fell, and since then it`s pretty tough to use it.
So, I ask two things:
1 - Does anyone knows a good volume widget that looks like it belongs to the ICS theme? Most i found looked pretty awful on the starting screen.
2 - How can I fix the problem? I thought about using some kind of superglue, but it would simply have no flexibility to press the buttons anymore...
Thanks in advance for any help at all.
radjan said:
Hi guys,
I had a problem with my volume button. It simply fell, and since then it`s pretty tough to use it.
So, I ask two things:
1 - Does anyone knows a good volume widget that looks like it belongs to the ICS theme? Most i found looked pretty awful on the starting screen.
2 - How can I fix the problem? I thought about using some kind of superglue, but it would simply have no flexibility to press the buttons anymore...
Thanks in advance for any help at all.
Click to expand...
Click to collapse
Use 'kitchen & bathroom sealant' or 'No nails glue'
Just use a spec of it in the middle of the button, not the phone & gently hold it in (on the inside plastic so it sticks). Then cotton bud to wipe access glue off if there is any (which there shouldn't be)
Happened to me, at first i used double sided tape but it kept & falling off
AwaisKhan said:
Use 'kitchen & bathroom sealant' or 'No nails glue'
Just use a spec of it in the middle of the button, not the phone & gently hold it in (on the inside plastic so it sticks). Then cotton bud to wipe access glue off if there is any (which there shouldn't be)
Happened to me, at first i used double sided tape but it kept & falling off
Click to expand...
Click to collapse
Worked like a charm. Thanks for the help!
radjan said:
Worked like a charm. Thanks for the help!
Click to expand...
Click to collapse
Your welcome!
Sent from my R800i using xda premium
The main problem here I suppose is that the XPlay's volume button, unlike the previous Java-based SE phones (i.e. K810i, which I previously owned), do not have the extra piece of plastic around the volume button that acts as an anti-dropping-off catch for the hole to which it fits in. It's a weird move by SE I suppose. Thinking how the rubber part easily separates from the actual volume button, I can imagine there are a lot of XPlay users who get disappointed going home to see their volume button has fallen off somewhere on the road when they were on their way home. Shame. Good thing mine fell off when me and my wife were browsing pictures of our baby in my bed. Jeez.

[Q] Volume down button broken: suggestions?

Hi everybody,
i think my volume down button is broken.
Volume up works but the volume down is gone.
Have you got any suggestion about how i could repair or change it?
Thank you!
sberla54 said:
Hi everybody,
i think my volume down button is broken.
Volume up works but the volume down is gone.
Have you got any suggestion about how i could repair or change it?
Thank you!
Click to expand...
Click to collapse
It's a cheap fix AFAIK, should be a few $ in your local phone shop. It's quite a common problem for our DHD, Thankfully I rooted before I broke my volume rocker (been living without one for 5 months now).
Yes, you're right. I've found a couple of repair items + kit on eBay for a few bucks:
http://www.ebay.it/itm/100-Genuine-...K_Replacement_Parts_Tools&hash=item1e6bf145b0
http://www.ebay.it/itm/HTC-G10-Desi...K_Replacement_Parts_Tools&hash=item416ca2bcd4
http://www.ebay.it/itm/Original-Sid...747?pt=LH_DefaultDomain_0&hash=item43b707586b
By the way, i've also found this topic (where there is you, too): http://forum.xda-developers.com/showthread.php?t=915895
It suggests you can fix the problem without changing any hardware parts:
This way:
I had the exact same problem with my volume rocker, the bottom part was sticking out but the top seemed all right.
I've just fixed it with a bit of glue and by only removing the battery lid.
For what it's worth, here's how I did it.
If you remove the battery lid you can gently pry out the loose end of the volume rocker, just a little so you can see what's supposed to hold it back.
There's a piece of plastic glued to the bottom of the volume rocker that's come partly undone.
I just put a toothpick between the case and the volume button, so it's sticking out.
Then I used another toothpick to get some superglue on the loose piece of plastic.
After that I removed the first toothpick and pressed down on the volume button for a bit.
Now it's all tight and snug like it used to be.
Be careful with the glue so you don't glue the rocker to the case or something.
Click to expand...
Click to collapse
or this way:
Had this problem, bottom volume became almost completely unresponsive and has really been bugging me for a few months now, so today I took the whole aluminium volume rocker off, slightly different experience to the post above.
Basically it's constructed pretty poorly, the aluminium rocker forms a latch at the top which holds onto the body of the device above where the button is seated.
The bottom of the rocker then has a plastic flap which is glued into a hole to hold the rocker on, this flap had more or less come off for me, seems very poorly manufactured, so I pulled up more and the whole button came off.
The actual volume buttons themselves are very small and these are seated in the housing of the device between this latch at the top and the plastic flap at the bottom. The rocker has two pieces which push down on the buttons to operate them.
Some dirt and grime had built up in there so I scraped that all off first with the head of a Phillips size 00 screwdriver.
I put a very small balled piece of paper on top of the volume down button and it's now working fine again, I just need to glue that flap back down so the rocker doesn't come loose. If the piece of paper is too big the volume rocker won't go down at all so you have to get the size right, relieved to have a working volume button again though.
Click to expand...
Click to collapse
And then i found a disassembly howto video: http://www.youtube.com/watch?v=JfatoeWbMRk
I think that I need to put to work now

[Q] semi loose buttons, power button creaking, and click on home button?

hey guys just a quick question, im very worried for some reasons. my buttons feel some what loose but not very loose. is this normal?
and when i press my power button in a certain direction it makes a creaking sound? im thinking my otterbox commuter case damaged it but is it okay? but its still fully responsive, and finally, when i click my home button dead center it makes a slight click noise like on an apple device. maybe not as loud but when i click the sides of the home button, no sound at all.
tmobile- galaxy sIII purchased brand new
GalaxyBoi14 said:
hey guys just a quick question, im very worried for some reasons. my buttons feel some what loose but not very loose. is this normal?
and when i press my power button in a certain direction it makes a creaking sound? im thinking my otterbox commuter case damaged it but is it okay? but its still fully responsive, and finally, when i click my home button dead center it makes a slight click noise like on an apple device. maybe not as loud but when i click the sides of the home button, no sound at all.
tmobile- galaxy sIII purchased brand new
Click to expand...
Click to collapse
I had the same problem with my home button, I just cleaned it with a pin around the edges and pressed it in different directions (Like pressing left, corners, bottom) and then wiped it with a wet paper towel which fixed my problem, its probably just dust build up?
If not you probably have to replace the buttons just get them from eBay.
52me52 said:
I had the same problem with my home button, I just cleaned it with a pin around the edges and pressed it in different directions (Like pressing left, corners, bottom) and then wiped it with a wet paper towel which fixed my problem, its probably just dust build up?
If not you probably have to replace the buttons just get them from eBay.
Click to expand...
Click to collapse
hi thanks for the tip! but do you know anything but the power button creaking problem?
GalaxyBoi14 said:
hi thanks for the tip! but do you know anything but the power button creaking problem?
Click to expand...
Click to collapse
No sorry I dont

Categories

Resources