Can anyone recommend a good quality dry screen protector without holes. Holes just collect dirt and debris.
I don't care if the sensor is affected as I use manual brightness control. I don't care if the front camera is affected, I don't really use it, besides a transparent sheet will obstruct the lense less than dirt and debris.
Obveron said:
Can anyone recommend a good quality dry screen protector without holes. Holes just collect dirt and debris.
I don't care if the sensor is affected as I use manual brightness control. I don't care if the front camera is affected, I don't really use it, besides a transparent sheet will obstruct the lense less than dirt and debris.
Click to expand...
Click to collapse
But a whatever 10" one and cut it yourself
macaumen said:
But a whatever 10" one and cut it yourself
Click to expand...
Click to collapse
Really does that work well? Cut it with an exacto blade using a template drawing? Any tips to avoiding rough corners or peeling?
Obveron said:
Really does that work well? Cut it with an exacto blade using a template drawing? Any tips to avoiding rough corners or peeling?
Click to expand...
Click to collapse
I never tried. A single hole for both camera and sensor doesn't bother me.
A guy at my work cuts his own and it looks like garbage. The Official Asus has the least holes (2) that I've found. Most others have one over the notification led.
Spigen is updating theirs to only have 1 over the camera.
Official ones come in a 2 pack (matte and glossy).
Sent from my Nexus 7 using xda premium
Illumishield has only 2 now... http://www.amazon.com/iLLumiShield-...ZC5PC/ref=aag_m_pw_dp?ie=UTF8&m=A3UBIR55NNWWB
danvee said:
Illumishield has only 2 now... http://www.amazon.com/iLLumiShield-...ZC5PC/ref=aag_m_pw_dp?ie=UTF8&m=A3UBIR55NNWWB
Click to expand...
Click to collapse
Since when? I just ordered mine and I should be getting them today. I hope mine only has two....
As of the second batch.
If you check their website the current images show only the camera and sensor.
They shipped me a set of 'corrected' ones on Monday.
danvee said:
As of the second batch.
If you check their website the current images show only the camera and sensor.
They shipped me a set of 'corrected' ones on Monday.
Click to expand...
Click to collapse
Crap, lol. I think I might have ordered too early then. I hope not.
EDIT: I still wish they would get rid of the LED cutout. That's pointless.
Just email them. They'll take care of it.
Wish granted.... That's exactly what they did.
Camera and sensor are the only 2 openings.
danvee said:
Just email them. They'll take care of it.
Wish granted.... That's exactly what they did.
Camera and sensor are the only 2 openings.
Click to expand...
Click to collapse
Just got them in. Only has two. Whew. I didn't want to have to wait. Awesome sauce
:thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:
Would have been better if they just made 1 single cut out for both the camera and light sensor.
Sent from my Nexus 4 using xda premium
Related
Hard casehttp://www.amzer.com/Amzer-Rubberized-Black-Snap-On-Crystal-Hard-Case-P88785.htm
Soft casehttp://www.amzer.com/Amzer-Silicone-Skin-Jelly-Case-Black-P88765.htm
hard case says its ships ships on 8/17?!! dunno if i can wait that long
The hard case appears to be covering the front facing camera
BradBot said:
The hard case appears to be covering the front facing camera
Click to expand...
Click to collapse
It's probably just a bad photoshop but the T959/Vibrant doesn't have one.
BradBot said:
The hard case appears to be covering the front facing camera
Click to expand...
Click to collapse
No camera, but you do bring up a good point that it covers the little light sensor or whatever that thing is on the front...
degeneration said:
No camera, but you do bring up a good point that it covers the little light sensor or whatever that thing is on the front...
Click to expand...
Click to collapse
Not only does it appear to cover the light sensor on the front, but the back of the case also appears to be covering the speaker. I picked up the Tmo case in store and really like it.
I am waiting for this one:
http://www.amzer.com/Amzer-Luxe-Argyle-Skin-Case-Smoke-Grey-P88793.htm
can you describe the one that you got at the tmobile store? is it a hard case or just the silicone one? how much was it?
im going to stop by the tmobile store today to look for a hard case and screen protectors. although people in the screen protector thread said the screen protectors from tmobile sucked. any suggustions that dont require me putting water on my phone like the clearfreak screen protectors?
btw, i am looking for something like posted above, but dont want to wait till mid august
Hard casehttp://www.amzer.com/Amzer-Rubberize...ase-P88785.htm
ArcticWolf91 said:
I am waiting for this one:
this case is bad ass. One thing i noticed is that it doesn't look like it has a hole for the speaker on the upper right side?
Click to expand...
Click to collapse
degeneration said:
No camera, but you do bring up a good point that it covers the little light sensor or whatever that thing is on the front...
Click to expand...
Click to collapse
There is a light sensor and a proximity sensor in front. Might be another one. I see 3 small dots on the front.
I've heard you're better off covering the front facing camera, at least it keeps you from thinking you can actually use the thing. (I don't have one, but I've heard in several places it's pretty much worthless).
The FFC is near worthless without Fring/Skype. You can chat with QIK but that's about it, the other stuff is worthless. So much for it taking over.
hi every1,
i have had this phone for over a month...but jus today i realised i have scratced my camera lens screen...is it a normal thing????n how to protect it in future...
Thanks to all in advance!!!!
To the op, there are various threads related to this already. Scratches will happen unfortunately. I suggest a screen cover or case if you want extra protection.
Btw, come on you baggies!
Sent from my HTC One X using xda premium
shadyy911 said:
hi every1,
i have had this phone for over a month...but jus today i realised i have scratced my camera lens screen...is it a normal thing????n how to protect it in future...
Thanks to all in advance!!!!
Click to expand...
Click to collapse
Yup, perfectly normal. The camera enclosure was very poorly designed. You'll need to get a case that has a lens protector or make your own I'm afraid. Mines pretty damn scratched already, I've started resting it on the edge of things so that the camera part hangs over the edge and isn't touching anything. Far and away the most irritating thing about this phone!
Get a cover or cover it with some scotch tape
rock is selling screen protector that comes with camera protection
I wonder why don't they just put Gorilla glass on the camera window. All my previous phones always met with this problem however hard I try to protect the camera. Even ones with a camera window cover (e.g. the Nokia N95 8GB from a long time ago), because the cover itself also becomes the source of scratch.
Are the scratches visible in the pics? Cause as long as its not,affecting the quality of the pic I don't care. Also mine had a nasty scratch but its not on the center of the lens
Sent from my HTC One X using Tapatalk 2
jargalus said:
Are the scratches visible in the pics? Cause as long as its not,affecting the quality of the pic I don't care. Also mine had a nasty scratch but its not on the center of the lens
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
not really.i mean i haven't noticed any change in the quality of the pics...so i think its better to get it protected before it starts messing around the pic quality!!!!
shadyy911 said:
not really.i mean i haven't noticed any change in the quality of the pics...so i think its better to get it protected before it starts messing around the pic quality!!!!
Click to expand...
Click to collapse
When u say protected you mean case or screen shield. Cause the 2nd one is fading the pictures
Sent from my HTC One X using Tapatalk 2
Hello , i want to buy the camera ring and the lens for my hox+ , is possible to change it? I saw that the back housing and the lens are the same piece
clitoridys said:
Hello , i want to buy the camera ring and the lens for my hox+ , is possible to change it? I saw that the back housing and the lens are the same piece
Click to expand...
Click to collapse
You can't change the camera ring but you can pop the glass lens of from inside.
Sent from my HTC One X using xda premium
omondisingh said:
You can't change the camera ring but you can pop the glass lens of from inside.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Can i change the glass with something else , without buying the glasslens?
clitoridys said:
Can i change the glass with something else , without buying the glasslens?
Click to expand...
Click to collapse
I had a spare One X housing and I wanted to paint it High gloss black. The lens just popped out when I pushed it out. You will have to remove the back housing.
Sent from my HTC One X using xda premium
So i can replace it with a Glass piece or not?
clitoridys said:
So i can replace it with a Glass piece or not?
Click to expand...
Click to collapse
You Cant
Get a Housing from eBay
Just replaced it with an glass lens cuted with scrissors.. The quality of the camera is much MUCH better than with the plastic lens!
:victory:
There are special compounds to polish scratches out from clear plastics.
Sent from...... Uranus
How about this one on ebay?
Klick me
luisant said:
How about this one on ebay?
Klick me
Click to expand...
Click to collapse
I think that work. I'm gonna buy too maybe. My photos now are blurry and no focus.
I suspect this is a screen out job to fit. Anyone tried?
Sent from my HTC One X using Tapatalk 2
Mine is still fine, so I won't have to change it by now.
But I assume that you might just use the little plastic lens instead of the whole ring so screen out wouldn't be needed
I just ordered the eBay lens and round frame only. My lens actually has a crack in it (if yours is just scratched, it can generally be buffed out). Before I ordered it, I tried prying along the LED flash to see if I could get the current one to lift up. Going slowly and carefully around the perimeter, I popped off the current lens cover. It can be done, and is sure a heckuva lot easier than removing the entire back housing.
How you do?
clitoridys said:
Just replaced it with an glass lens cuted with scrissors.. The quality of the camera is much MUCH better than with the plastic lens!
:victory:
Click to expand...
Click to collapse
Hey Clitoridys,
Can you please explain what kind of glass you used for this and what scissors? Did you have to paste the new glass lens into place?
My hox+ lens is slowly getting fkd more so everyday and I'd like to replace with glass rather than plastic.
I've Just upgraded to the HTC One m8 last week from a HTC One x, loving it so far :good:
One thing I wondered was what type of glass is the rear camera lenses made from, don't suppose it's gorilla glass at last is it?
all it takes is a tiny scratch on it in the middle and that's the end of good photos, every mobile with a camera i've had to date has ended up with poor photo quality due to scratches.
I wish they fitted a metal shutter to cover it really, but gorilla glass like used on the front screen would help i bet.
I can't find any info on what type of glass it is, I was wondering myself. I just cut out a small piece of plastic and set it between the case and the phone to cover the lenses.
It hasn't affected picture quality that I've noticed. But if it ever gets scratch I can just change out the piece of plastic.
I don't see why HTC would put such a big circle for a small camera lens.
Sent from my HTC One (M8) using XDA Premium HD app
UberSlackr said:
I don't see why HTC would put such a big circle for a small camera lens.
Sent from my HTC One (M8) using XDA Premium HD app
Click to expand...
Click to collapse
yeah i wondered that to, It's placed where my fingers go each time i pull it out my pocket to, the lens just gets finger prints all over it.
I was looking at all the cases to see if any have a shutter to close over it but no luck so far.
kingdeacon said:
yeah i wondered that to, It's placed where my fingers go each time i pull it out my pocket to, the lens just gets finger prints all over it.
I was looking at all the cases to see if any have a shutter to close over it but no luck so far.
Click to expand...
Click to collapse
I am also wondering about this if anyone knows of anything.
paul211b said:
I am also wondering about this if anyone knows of anything.
Click to expand...
Click to collapse
Wouldn't that be to capture more light in the lens ?
yamani.m said:
Wouldn't that be to capture more light in the lens ?
Click to expand...
Click to collapse
Looking for ideas to protect the glass over the camera len's
paul211b said:
Looking for ideas to protect the glass over the camera len's
Click to expand...
Click to collapse
Just get a cheap screen protector a cut out a circle ?
But then agian, the glass is recessed in the housing i don't see how you would scratch it like that in the first place
Hi all,
We all know how hard it is to find a good Tempered glass for a smartphone with curving edge display,
That also the case with our Pixel 2 XL
Luckily, finally i managed to found tempered glass that has full adhesive, case friendly, and doesn't break our bank account, :laugh:
Here's the product : Tempered Glass for Google Pixel 2XL Screen Protector FULL GLUE Case Friendly Premium Screen Glass Protector For Google Pixel2XL
http://s.aliexpress.com/qqYVbYFZ?fromSns=Copy to Clipboard
(from AliExpress Android)
Price : $11.77 include free shipping,
It took week till it arrive to my door. Item shipped from Hongkong, am living in Indonesia
Packaging : its good and safe. Tempered glass placed inside a sterofoam box .
Installation : Now, this is the tricky part, although it has full adhesive, the installation wont go as simple as installing other (ex iPhone) full adhesive TG. It (the adhesive) tends to spread unevenly causing bubble.
The trick is to go from the corner, while keep the other corner floating, press the glass with two or more finger ensuring no bubble appear in the process.
It will take sometimes till you get it right with zero bubble,
But the result is rewarding. It perfectly fit, and can be used with cases as well. I use it with original google fabric case.
Check some pictures bellow :
Pictures with screen on and on a straight angle?
scottjal said:
Pictures with screen on and on a straight angle?
Click to expand...
Click to collapse
Like this ?
scottjal said:
Pictures with screen on and on a straight angle?
Click to expand...
Click to collapse
Sorry, forgot to turn off the portrait mode
Yes. Doesn't look like it cuts off the edges too badly. What I was waiting on but not sure I want to deal with Ali.
scottjal said:
Yes. Doesn't look like it cuts off the edges too badly. What I was waiting on but not sure I want to deal with Ali.
Click to expand...
Click to collapse
It was quite gambling for me as well, lol,
But since i have no other option available in my country, u guess i have nothing to lose for 12 bucks.
Now am waiting a case to arrive
Looks good. I just don't understand why they make the top and bottom black instead of clear if it is full adhesive.
I'm guessing this is the same product as HeroShield. Looks the same. My HeroShield should arrive in a few weeks, so we'll see.
Does it have a cut out for the proximity sensor? I don't mean just a transparent window, proper gap/no glass bit over the sensor. I can't see from the photos
how is the screen feel and oleophobic coating? Does the finger glide eaily on the screen?
kyacrash said:
Looks good. I just don't understand why they make the top and bottom black instead of clear if it is full adhesive.
Click to expand...
Click to collapse
Its because although the adhesive on the display area is full, there's lil gap on the edge area where it doesn't have the adhesive, i guess due to the curve, it still not possible to create fully transparent glass protector with full adhesive. I never seen one for popular phone like iphone either. All iphone x glass protector has coloring as well.
The only real transparent protector with full adhesive is whitestone probably, but thats using low viscosity loca to begin with, so its different story, not to mention the skyhigh price.
mkouk said:
Does it have a cut out for the proximity sensor? I don't mean just a transparent window, proper gap/no glass bit over the sensor. I can't see from the photos
Click to expand...
Click to collapse
It doesn't. It have a transparent window with adhesive under . It stick perfectly though, thus no interference to the proximity function. I try make a call and place finger over the sensor, it work normally
Mikulec said:
how is the screen feel and oleophobic coating? Does the finger glide eaily on the screen?
Click to expand...
Click to collapse
Nothing extraordinary regarding the coating i guess. Finger glide nicely just like on original screen. But it collecting fingerprint overtime. (Am one of those guy who have wet hand all the time though, so my experience with fingerprint might be severe than how it should) :silly:
ordered! hope it will arrive soon!
btw do you have to tear it out to re position it when you are applying on the screen?
bradputt said:
ordered! hope it will arrive soon!
btw do you have to tear it out to re position it when you are applying on the screen?
Click to expand...
Click to collapse
You need to lift it off if you already stick large area of it prior to reposition,
Positioning is quite easy though, the harder part is to push the glass slow and even.
I'd almost be interested, but I try to stay away from protectors that cover the proximity sensor. I know it works sometimes, I've just been bitten by it too many times on phones where it causes issues.
Here's HeroShield's install video. Seems like they include a squeegee with theirs to help with the bubbles.
Mine comes today, so I'll see what it's like too.
ilal2ielli said:
Here's HeroShield's install video. Seems like they include a squeegee with theirs to help with the bubbles.
Mine comes today, so I'll see what it's like too.
Click to expand...
Click to collapse
These look interesting. I am with the previous poster about the prox sensor cut out. Please share your experience when you get it.
kiru said:
These look interesting. I am with the previous poster about the prox sensor cut out. Please share your experience when you get it.
Click to expand...
Click to collapse
Can see from the video that it has glass covering the sensor, so it will be hit or miss. Some will have no issues with the sensor. Others will.
Mine will be here in a few weeks, so I'll see then too.
Hi OP... Are you able to post some picts of the top and bottom edge of the phone? Or a pict that can somehow show the gap of the side of the protector to where it meets the screen. Just curious to see if there is a slight gap as there is no adhesive there. Since I go case less, I am afraid I will always crack the glass because of this gap. Thanks in advance!
Something like this ?
Those picts are good!!! thanks!!!