The phone is a korean shv-e250k. I got it 2nd hand, it already had a n7105 rom on it.
I rooted it successfully using cf-auto-root for n7105, I also successfully installed philz recovery, I then decided to format it, I booted into recovery, chose the factory reset option, and instead of wiping it, I chose the clean -"install a new rom" option. But I didn't have a flashable rom on hand, so I just rebooted it, it is now stuck on the Galaxy Note II screen.
Things I tried to fix the problem:
1. Downloaded dmc3 stock from sammobile and flashed it using odin, results in nand write fail.
2. Downloaded pre-rooted deodexed dmc3 stock rom, I can still boot to recovery in philz and tried flashing it through there, results in getting stuck midway while flashing.
3. Downloaded perseus kernel and tried flashing it using odin, flashed successfully but phone still stuck on booting up.
I can still go into download and philz recovery mode. What other steps can I take?
Update: I tried using a different recovery, I download the cwm advanced recovery, flashed it successfully through odin, booted into recovery, tried to flash a new rom and it still won't go past the halfway mark.
It's really weird cause I can boot into download and recovery mode without any problems, what should I do?
Finally got it up and running again by flashing a stock shve250 rom using odin,
exactly the same problem here,,
--------------------
---------- Post added at 01:29 PM ---------- Previous post was at 01:28 PM ----------
the stock rom you flashed ? is it working 100% fine ?
mines radio doesnt work , S pen complete features are not available and internal storage is not being shown :S
blueazure said:
exactly the same problem here,,
--------------------
---------- Post added at 01:29 PM ---------- Previous post was at 01:28 PM ----------
the stock rom you flashed ? is it working 100% fine ?
mines radio doesnt work , S pen complete features are not available and internal storage is not being shown :S
Click to expand...
Click to collapse
Everything works, but this could be due to my location, I live in the Philippines, and korean phones have been known to work here with our local telcos, internal storage shows 24gb free, I have the 32gb version btw.
This is the site where I got the rom from - http://samsung-updates.com/
I guess you have to make sure you have the right rom, even though this had a n7105 rom when I got it, when I boot into download mode, the text instructions for pressing the up button is in korean, and the screen where it shows the binary counter states that the phone is an shv-e250k. So maybe you have to flash the exact rom as stated in download mode.
what is the exact link to the stock ROM you flashed ?
Related
I just tried to do an nandroid to a previous ROM, this has been done many times before via CWM. This time after reboot I got stuck in a bootloop as I pulled battery and manually tried to get into recovery with power/volume this time it went to odin mode and now says dowloading, do not turn off target.
I have powered down phone from ODIM mode. but now when trying to re-boot im stuck at samsung galaxy boot screen. I now have tried once or twice to manually get into recovery to see if sends me to CMW but phone resets back to the boot rather than bootloader.
I have tried to hold volume up and power to try and boot into recovery and all I get is the bootloop while holding the buttons, never gets routed to recovery. (I heard for ODIN you hold volume down and power)
Has anyone experienced this? I have never used ODIN so no sure where this is comming from.
I have tried to manually get into recovery and I get a samsung message that downloading a custom OS can be harmfull either I can proceed or re-boot. If I proceed (volume up) I get the "downloading do not run off traget" in ODIN mode if i do volume down I reboot but that back at the bootloop
If you cannot get into recovery you are probably going to have to flash through Odin. From the sound of it you never used odin before. I would flash back to the stock rooted rom and then reinstall clockwork mod. I will provide links. A file probably just got corrupt during the nand restore. Lets hope I can get ya back up and running.
Install stock rooted rom:
http://www.youtube.com/watch?v=v7pWjmKCsoc&context=C3947c01ADOEgsToPDskJI18lFujJeVrMeUHHZ0m_o
Reinstall Clockwork Mod:http://www.youtube.com/watch?v=jZRnH-_XZmM
Make sure you follow the steps exactly and do NOT pull out the cable during odin until it is complete or you WILL brick your phone!
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
If anyone has an easier way please feel free to share it as I am not a noob but not as much of an expert as some others on this site.
rbtrucking said:
If you cannot get into recovery you are probably going to have to flash through Odin. From the sound of it you never used odin before. I would flash back to the stock rooted rom and then reinstall clockwork mod. I will provide links. A file probably just got corrupt during the nand restore. Lets hope I can get ya back up and running.
Install stock rooted rom:
http://www.youtube.com/watch?v=v7pWjmKCsoc&context=C3947c01ADOEgsToPDskJI18lFujJeVrMeUHHZ0m_o
Reinstall Clockwork Mod:http://www.youtube.com/watch?v=jZRnH-_XZmM
Make sure you follow the steps exactly and do NOT pull out the cable during odin until it is complete or you WILL brick your phone!
---------- Post added at 11:27 PM ---------- Previous post was at 11:23 PM ----------
If anyone has an easier way please feel free to share it as I am not a noob but not as much of an expert as some others on this site.
Click to expand...
Click to collapse
When I get home ill give it a shot, you are correct I never used ODIN, I came from the EVO's so CMW has been all ive dealt with.
I think you hit it on the head rbtrucking.
Odin restore + root
CWM
Flash away
Sent from my Blazing ET4G
tkemack said:
I think you hit it on the head rbtrucking.
Odin restore + root
CWM
Flash away
Sent from my Blazing ET4G
Click to expand...
Click to collapse
Thanks guys, seemed to do the trick got my phone up and running just like it was. I just need to download CMW and ive done that when firdt rooted so shouldnt be a problem. You think if I use a backup from before (other than the one i used when i initaly had issues) will be a problem?
Thanks again
you should be good.
I've been trying to root my Note 2 using the guide on XDA ( http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 ). However, I can't access the CWM recovery. This is what I tried, maybe you can see where I did something wrong:
I've started Odin, clicked PDA and pointed it to the philz_touch file which I downlaoded through the link provided in the guide.
Auto-reboot and F. Reset Time are checked.
Then I put my phone into download mode, waited until the com.port thing turns blue.
Then I clicked start. Everything seemed to work fine and Odin said "PASS" or something.
The phone rebooted, but not into recovery. When I try to access recovery I see that it's stock.
According to the instructions in the guide I then unchecked auto-reboot, repeated the procedure and rebooted by keeping the power button pressed.
It doesn't go into recovery but just starts up.
When I try to access recovery it is still stock.
WHAT THE HELL DO I DO?
Can you name the file you flash?
this is XXXDDDAAA
The one linked in the guide: philz_touch_4.64-n7100.tar.md5
Sent you a PM
Sent from my GT-N7100 using xda premium
dr.ketan said:
Sent you a PM
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
You are awesome. Problem solved.
Baardman said:
You are awesome. Problem solved.
Click to expand...
Click to collapse
erm..care to share it?
hi
i've the same problem
when i reboot to recovery, the screen freezes and the phone turns off; it happens when i install CWM through galaxy note 2 toolkit
Also, when i try to install CWM via rom manager, the download progress stucks at 0/100 and, nothing
However, when i reinstall stock recovery via galaxy note 2 toolkit, i can get to stock recovery without any problem
anyone has a tip for me to solve this problem?
thanks in advance
rbrice89 said:
hi
i've the same problem
when i reboot to recovery, the screen freezes and the phone turns off; it happens when i install CWM through galaxy note 2 toolkit
Also, when i try to install CWM via rom manager, the download progress stucks at 0/100 and, nothing
However, when i reinstall stock recovery via galaxy note 2 toolkit, i can get to stock recovery without any problem
anyone has a tip for me to solve this problem?
thanks in advance
Click to expand...
Click to collapse
well just flash philz recovery via odin http://forum.xda-developers.com/showthread.prehp?t=1896696 all files available here , be sure to enable usb debugging and unistall kies just install the usb drivers that will do
Note :
normally, phone should auto-reboot into recovery.
If it reboots into android and your recovery remains stock, repeat above steps and untick "autoreboot" in odin. Once flash is done, keep pressing power button until it reboots (normally will go to recovery)
when in recovery, if you choose option "reboot system now" and you get "yes - disable flash recovery", select that option to avoid stock recovery overwriting cwm
thanks; i'll try
the link you put is not working, but i did a research on the forum (i didn't know philz recovery) and i downloaded it
hope it'll work
---------- Post added at 04:03 PM ---------- Previous post was at 03:32 PM ----------
:laugh:
i got my custom recovery working now
thanks to you shhbz:good:
Note 2 cwm
rbrice89 said:
thanks; i'll try
the link you put is not working, but i did a research on the forum (i didn't know philz recovery) and i downloaded it
hope it'll work
---------- Post added at 04:03 PM ---------- Previous post was at 03:32 PM ----------
:laugh:
i got my custom recovery working now
thanks to you shhbz:good:
Click to expand...
Click to collapse
I noticed you had the same problem i'm currently experiencing. I downloaded tolkit and rooted via Odin. My Note 2 GT-N7100 is not booting into recovery. It turns off and restarts normal. How can I access CWM recovery. What files did you download? and can I re-install cwm via odin while my phone is rooted?
Thanx in advance....
---------- Post added at 04:41 PM ---------- Previous post was at 04:32 PM ----------
Baardman said:
I've been trying to root my Note 2 using the guide on XDA ( http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 ). However, I can't access the CWM recovery. This is what I tried, maybe you can see where I did something wrong:
I've started Odin, clicked PDA and pointed it to the philz_touch file which I downlaoded through the link provided in the guide.
Auto-reboot and F. Reset Time are checked.
Then I put my phone into download mode, waited until the com.port thing turns blue.
Then I clicked start. Everything seemed to work fine and Odin said "PASS" or something.
The phone rebooted, but not into recovery. When I try to access recovery I see that it's stock.
According to the instructions in the guide I then unchecked auto-reboot, repeated the procedure and rebooted by keeping the power button pressed.
It doesn't go into recovery but just starts up.
When I try to access recovery it is still stock.
WHAT THE HELL DO I DO?
Click to expand...
Click to collapse
I noticed you had the same problem i'm currently experiencing. I downloaded toolkit and rooted via Odin. My Note 2 GT-N7100 is not booting into recovery. It turns off and restarts normal. How can I access CWM recovery. What files did you download? and can I re-install cwm via odin while my phone is rooted? just do it over? how did you do it?
Thanx ....
Make sure USB debugging is clicked under developer option. after this install Philz recovery through ODIN. and then flash SuperSU.
This will do.
prav82 said:
Make sure USB debugging is clicked under developer option. after this install Philz recovery through ODIN. and then flash SuperSU.
This will do.
Click to expand...
Click to collapse
Thank you so much dude, I found the Phylz recov in thread & followed as you say... Working great now, thanx...
Baardman said:
You are awesome. Problem solved.
Click to expand...
Click to collapse
Can you please share the solution? I'm stuck with this.
TWrp recovery install failed
I am n7100 stock unrooted. I tried to install Twrp recovery through odin.
Everything seems to have gone fine. I followed instructions to the letter. But I failed to notice if it said pass or not and note2 booted on its own. I don't how bad it is or what I should do next. Phone working fine otherwise. Please help.
Hey guys I'm in some trouble. I tried to flash a new ROM to my phone and for the first time ever something bad happened. It wouldn't get pass the splash screen. So i entered recovery mode again using TWRP and reflashed everything. Kernal, rom etc...Still nothing. When I tried to reboot out of TWRP it said I didn`t have root. I choose to install it but nothing happened. I tried to use odin to flash but it failed. On the download screen of the phone it said I didn`t have a custom binary installed. Anyways i tried to reboot into recovery after the ODIN fail and now I get a screen saying `Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again`. Also my custom binary count went up to 2!
This is the first time this has happened to me and it happened at a really bad time of the day. Any help would be appreciated !
Edit : I can`t get into recovery but i can get into download.
So i was able to reinstall TWRP with Odin. But I don`t know hot to get back root since my rom won`t both. I cant restore a nandroid because TWRP can`t mount anything at all. Even when I try to reinstall the rom.
BoostRoid said:
Hey guys I'm in some trouble. I tried to flash a new ROM to my phone and for the first time ever something bad happened. It wouldn't get pass the splash screen. So i entered recovery mode again using TWRP and reflashed everything. Kernal, rom etc...Still nothing. When I tried to reboot out of TWRP it said I didn`t have root. I choose to install it but nothing happened. I tried to use odin to flash but it failed. On the download screen of the phone it said I didn`t have a custom binary installed. Anyways i tried to reboot into recovery after the ODIN fail and now I get a screen saying `Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again`. Also my custom binary count went up to 2!
This is the first time this has happened to me and it happened at a really bad time of the day. Any help would be appreciated !
Edit : I can`t get into recovery but i can get into download.
Click to expand...
Click to collapse
The first bootloop you got would have been remedied by doing a factory reset and wiping cache and dalvik.
Odin always raises your binary counter.
Reboot into download and flash a stock rooted Rom with Odin. The Firmware error is common after a bad flash with Odin, just ignore it. You should be fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 06:18 PM ---------- Previous post was at 06:17 PM ----------
KorGuy123 said:
The first bootloop you got would have been remedied by doing a factory reset and wiping cache and dalvik.
Odin always raises your binary counter.
Reboot into download and flash a stock rooted Rom with Odin. The Firmware error is common after a bad flash with Odin, just ignore it. You should be fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Edit... what Rom did you flash? Some kernels don't agree with some roms. Best to flash Rom and set up kernel later after initial set up.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 06:20 PM ---------- Previous post was at 06:18 PM ----------
BoostRoid said:
So i was able to reinstall TWRP with Odin. But I don`t know hot to get back root since my rom won`t both. I cant restore a nandroid because TWRP can`t mount anything at all. Even when I try to reinstall the rom.
Click to expand...
Click to collapse
Your best bet is to flash stock and re root and start over again.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hey thanks man. I somehow got it working again though I erased my sdcard by accident. Oh well. Lesson learned. Thank you.
Hey everyone, Im not new to rooting and flashing custom ROMs and all that, but it has been a long while since Ive done any of it. I have a S2 that had 4.0.3 and i rooted it the other day. Then i went to flash one of the latest ROMs but I failed to pay attention to the note that said i needed the latest CWM Recovery touch or I would end up in boot loop. Well thats where I am at, i tried to reflash back to stock, and tried to flash CWM touch using Odin but neither have worked....Now i either get a boot loop or i can get into download mode, recovery wont seem to boot...i cant afford another phone right now and I am hoping there is a way. I assume its only soft bricked and fixable but I am stuck, can someone please help me?
If Odin sees your phone...it will work. Just need the right version. I had no luck with 3.0.7. .... 3.0.4 worked for me. Just try that one, or other versions till it works.
If Odin doesn't see your phone, then that is another issue.
Also wipe the phone first in recovery...caches, data and system.
Sent from my Moto X cell phone telephone.....
---------- Post added at 12:01 PM ---------- Previous post was at 11:56 AM ----------
Try Odin 1.85 to flash recovery. And try twrp...most prefer it. At first try 2.5.0.0.....wipe your phone with it. Then other Odin version to flash stock 4.1.2. Then flash the twrp version that's appropriate to the Rom you plan on flashing, if any. Twrp will give you root when you exit it.
Sent from my Moto X cell phone telephone.....
The phone is rooted and cwm v6.0.x is installed. I was trying to flash C-rom last night for my first time but got stuck and said your root maybe lost blash blah. Now every time i turn on my phone, it starts and gets stuck on the black screen with samsung lego.
Before flashing my phone was 4.4.2 i recently received update my phone carrier. Then i rooted it after..
---what i did to solve the problem------
1. I wiped everything (all the catches) and did factory rest. Then tried to restore from backup i made. Didnt work.
2. Connected my phone with Kies and tried frameware upgread.They asked for phone model and s/n, download the framware directly and at the end
it gave me an error. I dont exactly remember what it was but i think it was saying phone can not be recovered.
............................This are what i have done so far.
..................................................................................
Now I'm going to try to flash to the factory rom via Odin. After so many researches, someone was able to fix their phone with they flashed their factory rom and kernel. I thought downloading the factory rom was good enough, what did they mean by flashing the karnel to? you can flash your karnel and rom? where do you get your kenels? This is the link to the process....http://forum.xda-developers.com/showthread.php?t=1833177
................................................................
My phone is on Downloading Mode thing.......This is what i see
ODIN MODE
Product Name: SGH-I747M
Current Binary: Custom
System Status: Custom
Qualcom Secureboot: Enable
Warrenty Bit: 1
BootLoader AP SWREV:2
Any one contributing for the help, must appreciated.
Thanks.
Factory reset, but do not restore your backup. Touchwiz and cm/aosp data are not compatible. So when going between the two, you have to factory reset or it'll hang at boot.
You can restore individual apos from something like Titanium backup, but you cannot restore system data or a nandroid backup.
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
If you flash the stock rom, itll probably boot up again because the data you restored is compatible with that.
Odin Says Fail!
so flashing stock rom via Odin failed
How did it fail? What was in the messages in Odin? What firmware did you try to flash?
fixed!
DocHoliday77 said:
How did it fail? What was in the messages in Odin? What firmware did you try to flash?
Click to expand...
Click to collapse
ok well after so many trials i have successfully installed stock rom. I download my stock rom from this site. http://www.mrcrab.net/androidfirmware/SGH-I747M/Samsung-Galaxy-S3-North-America-SGH--I747M.html
i extracted the md5 file the run it via odin again. first it failed, second time it froze third time it took forever and final at 4th trail it passed.
now im running stock rom.
Just one more thing though. under downloading.. mode thing my Warranty Bit: 1 and is written in red. does it mean anything beside warranty void?
It does void warranty yes. But it also breaks your ability to use knox, which no one ive ever seen on xda really cares about!
Glad to hear you finally got it working!