We are the Part of armv6 and his team
CyanogenMod 10.2 - GT-I5510 Discussion Thread
The cyanogenmod 10.2 build 2 is ready to test out and it is reportedly booting, for those who want to test it out,
Visit the thread : http://forum.xda-developers.com/showthread.php?t=2438393
If you want me to keep working for this device since i don't own this device so please co-operate with me, provide me
log and problem/bugs. And first build of cm 10.2 is booted without problem so it is just a start.
For those who want to get started for device, look at source
For Developers
Generic source : http://www.github.com/androidarmv6
Device Source : http://www.github.com/ankur850/android_device_samsung_callisto
Kernel Source :https://github.com/ankur850/android_kernel_samsung_callisto
For Newbies
Test the rom, even a single feature report bug to any advance user, and discuss/post here about that bug. Fell free !
For Advanced users
You'll have to provide me the logcat with detailed problem either with post or pm (pm only once). Since you are advance
user so help the newbies here those who have problem with bugs that is solved and discussed here. Co-operate with me.
I think kernel v3 is the 1st thing to do cause after ics the kernel was updated and so as compatbility and drivers....
Sent from my GT-I5510 using Tapatalk 2
AshuGite said:
I think kernel v3 is the 1st thing to do cause after ics the kernel was updated and so as compatbility and drivers....
Sent from my GT-I5510 using Tapatalk 2
Click to expand...
Click to collapse
so we need too modify current kernel config, and psyke and Rashed successfully ported to their device but barely it is not stable.
So anyone coming or not ? Still alone
so what we can do... should ask for help....
Sent from my GT-I5510 using Tapatalk 2
I would very much like to help you devs for our device, but i barely know anything
just provide me the log when i need. That should be fine enough
I m currently facing some useless errors while building that could take up some days to fix it up and cyanogenmod 10.2 source is still merging.
And @AshuGite do you got full wifi working with searching on cm10.1 ?
AshuGite said:
I think kernel v3 is the 1st thing to do cause after ics the kernel was updated and so as compatbility and drivers....
Sent from my GT-I5510 using Tapatalk 2
Click to expand...
Click to collapse
And the 4.3 is the last upgrade for all armv6 socs i.e our callisto, Android 5.0 i.e keylimepie never going to boot on armv6 socs.
So don't except the android 5.0.
ankur850 said:
And the 4.3 is the last upgrade for all armv6 socs i.e our callisto, Android 5.0 i.e keylimepie never going to boot on armv6 socs.
So don't except the android 5.0.
Click to expand...
Click to collapse
thats perfectly fine... atleast our efforts brought android 4.2 which was unexpected...
Too many errors, seems that cyanogen source is still not merged for Samsung
Sent from my GT-S5830
ankur850 said:
Too many errors, seems that cyanogen source is still not merged for Samsung
Sent from my GT-S5830
Click to expand...
Click to collapse
everything will be fixed with time... not to worry...
:beer:
Sent from my GT-I5510 using Tapatalk 2
Looking Cool
Rom Manager for Callisto
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Experimental build ready
First cm 10.2 build : http://d-h.st/3K3
had anyone going to test ?
eagerly waiting for results
Edit :
I will test in few hours on my gf phone
Wysłane z mojego Nexus 7 za pomocą Tapatalk 4
anyone know about focal, the new camera app from Cynaogenmod.
Get the latest, may also work on cm10.1 too but not sure if it work on armv6 ! Test it and report.
http://jenkins.androidarmv6.org/job/focal-builder/5/
If possible i will test and report the build 1....
Sent from my GT-I5510 using Tapatalk 2
AshuGite said:
If possible i will test and report the build 1....
Sent from my GT-I5510 using Tapatalk 2
Click to expand...
Click to collapse
Ashu did you try Focal.apk on cm10.1 ?
it is cool app to try :fingers-crossed:
Ok i will try that one also....
Sent from my GT-I5510 using Tapatalk 2
I've tested the apk but it's not working.
Inviato dal mio GT-I5510 con Tapatalk 2
Flashed the build 1 it is not booting.... i gets restarted to recovery... kernel needs sum serious work....
Sent from my GT-I5510 using Tapatalk 2
Kernel is fine, seems that we need to change the system partition size
By compiling new recovery, and 4.3 can boot on 2.6.
@ame316 you tested it as system or user app ?
Fc was soon to be fixed, trying to rebuild on jenkins .
Sent from my GT-S5830
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well it was a long time, no see..
With that said;
As you may or may not know i'm working on a 3.1.10 kernel for the HTC Endeavoru. At this point most of the work is done but i'm stuck now, so i'm looking for help from some other (kernel) devs.
The issue is that the kernel boots fine but reboots after 2 minutes and a few seconds. Seems there is an issue with the frequenty cant be set correctly.
Working:
- Mobile network
- Audio
- Bluetooth
- Camera
- etc.
Wifi will work as soon as the correct drivers are rewriten but seeing it reboots after 2 minutes its kinda useless to do all this work now.
The board files are rewriten for the most part and only some drivers are forward port from 2.6.39 (power, leds, camera) all the other is stock 3.1.10 stuff.
You can find the kernel source here:
https://github.com/TripNRaVeR/tripndroid-endeavoru-3.0
Edit 21-06-2012:
The reboot issues are sorted and the kernel is stable, in the meantime more drivers rewriten so only camera is 2.6.39.4 at this point. Alpha will be available tonight as i'm going to do a quick "redo" to get a cleaner source.
It will be a nvidia tegra reference kernel so most likely not working on sense. A Android reference kernel (3.3.0) also from scratch build is also in the makin and will follow up after this.
PRE-TEST STUFF: UPD: 24-06
This version includes the wifi stuff
A pre-test version is available here:
http://www.mediafire.com/?nh0nacpwijuj441
The zipfile contains modules and a zImage because its merely intended for people who know what they are doing.
You need to push the modules to system/lib/modules and then fastboot boot zImage
Test 4: 02-07-2012
http://www.mediafire.com/?pucj6msblflbj3a
Post youre reports in this topic!
Test 5: near a finish
http://www.mediafire.com/?v116zr7twaip780
Note: flashing at youre own risk and you know that you are downloading a kernel not based of any htc stuff so i could be missing some important parts/protections (offcourse i tested this release so you're kinda safe)
Hey trip, it might be worth having a chat with kholk as he has a 3.4 kernel that is almost released and does not have this problem (so possibly has solved this issue).
Finally u r in xda..welcome mate......let the magic flow now..
Sent from my HTC One X using xda premium
Happy to see you back here,
hoping to see your other work here as well
ChriKn said:
Happy to see you back here,
hoping to see your other work here as well
Click to expand...
Click to collapse
+1 did you bring your rom's with you
Good to see you here. Hope no more conflicts and have a happier community =)
kemmo123 said:
+1 did you bring your rom's with you
Click to expand...
Click to collapse
I did...
*waits for a new topic 'TripNRaver CM9'*
Hope you get some support to get the kernel running
Awesome to see you here man!!! :-D
Hope the reboot issues are sorted out soon.
Sent from my HTC One X using Tapatalk 2
After flash this kernel mg phone is very slow,i have more lag and banch go low,sorry for mg bad english
Inviato dal mio HTC One X con Tapatalk 2
cranio84 said:
After flash this kernel mg phone is very slow,i have more lag and banch go low,sorry for mg bad english
Inviato dal mio HTC One X con Tapatalk 2
Click to expand...
Click to collapse
Seeing there is no kernel released.. did you compile it yourself?
For me it is not slow at all, just the reboot after 2 minutes
Very much welcome!
Welcome Back Trip !
Glad to see you back here Trip, I wish I could actually help, but good luck!
awesome
by the way i ported your CM9 kernel to Sense ROMs on saturday but it only worked in single core mode
hamdir said:
awesome
by the way i ported your CM9 kernel to Sense ROMs on saturday but it only worked in single core mode
Click to expand...
Click to collapse
Strange normally that shouldnt make a difference between cm9 or sense
Welcome back Trip, loved your work and your current cm9 rom is great.
Is the terrible battery life and nuclear fusion heating fixed now then? (that was a non-S2W kernel, too...)
Although I must confess the loss of WiFi range I was ranting about a few weeks ago was nothing to do with Trip's CM9/Kernel - it was a now well-documented hardware fault
awesome to see you here matey
@hamdir is this the exact same kernel you uploaded at the weekend?
beanbean50 said:
awesome to see you here matey
@hamdir is this the exact same kernel you uploaded at the weekend?
Click to expand...
Click to collapse
nope this one is kernel 3.x
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog in 2nd post
Bugs
Same as OpenSEMC CM10.1 ?
Credits
AOKP
CyanogenMod
Team OpenSEMC
RaymanFX
Source
https://github.com/OpenSEMC/
https://github.com/AOKP/
https://github.com/koen01/android/ My github
Download
http://d-h.st/Guz
Update 07 22 13:
http://d-h.st/ZHJ
Update 07 26 13:
http://d-h.st/a23
Update 07 26 13:
Minor update,
contains all AOKP commits up to 26th july (JB-MR1-M2)
Added LockClock settings to Settings >> Display >> LockClock
Added BeanStalk lockclock that has more weather icon themes
Update 07 22 13:
- added fuji-chocolate OpenSEMC kernel.
- video overlay works
- added romstats
- LockClock added
- Apollo added
Update 07 12 13:
AOKP & OpenSEMC sources synced up to 12th july.
3.4 kernel
Known bugs:
All the same as openSEMC currently has (no 1080 video, wifi thethering broke)
- Apollo FC on boot, but works anyway
- Charging issues? Disable & re-enable USB Debugging in developer settings
ny-hardcore said:
for future
Click to expand...
Click to collapse
nice :good: downloading and gonna give it a try
downloading...
great job thanks for this rom:thumbup:
I was waiting AOKP to come out. I am a big fan.
Thanks ny-hardcore for compiling it.
Tested. Boots and works great. Only bug I found is that it sometimes stops charging randomly and then starts charging normally after sometime. Except that everything is awesome.
Screenshots:
4.2.2 with 3.4 kernel
Building now with new 3.4 kernel from OpenSEMC sources
*fingerscrossed
ny-hardcore said:
Building now with new 3.4 kernel from OpenSEMC sources
*fingerscrossed
Click to expand...
Click to collapse
Could you please post a flashable zip with just a kernel?
Powered by TVR 2.4.1 with Android 4.1.2 on the board.
Nice -_-
Sent from my LG-LS970 using xda app-developers app
Would be the first Rom with 3.4 Kernel
I would love to see an up-to-date AOKP...
it will take some time. getting boot-loops with the new build.....
need to look into whats going wrong but dont have time right now, sorry...
ny-hardcore said:
it will take some time. getting boot-loops with the new build.....
need to look into whats going wrong but dont have time right now, sorry...
Click to expand...
Click to collapse
You'll have to wait until Rayman finish
Belive me - you can't compile with that sources, at least not yet
Sent from my LT26i using Tapatalk 2
funky0308 said:
You'll have to wait until Rayman finish
Belive me - you can't compile with that sources, at least not yet
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
The kernel works (at least it boots, recovery works (TWRP) and bootanimation works.
But still struggeling how to logcat with 4.2.2 or at least see whats happening while booting
too bad..
ny-hardcore said:
The kernel works (at least it boots, recovery works (TWRP) and bootanimation works.
But still struggeling how to logcat with 4.2.2 or at least see whats happening while booting
Click to expand...
Click to collapse
And RIL?
You have signal?
Sent from my LT26i using Tapatalk 2
funky0308 said:
And RIL?
You have signal?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
How should he check that when its not booting..
Keinbockwurst said:
How should he check that when its not booting..
Click to expand...
Click to collapse
i got it booting, ANT stuff breaks AOKP somehow (didn't investigate, just rm'ed the apk's)
WIll have to wait for RaymanFX to complete his work on cm-10.1 / device source..
i'm not qualified for this kind of developing. Hats off to RaymanFX and Letama for their work!
Looking forward to your build.
Gesendet von meinem Xperia S mit Tapatalk 2
Credits to
@FREE Xperia Project @CyanogenMod @RaymanFX @ganeshbiyer @letama @kin912
@PA team @all user who keep supporting
ROM 4.2
this still on very first phase
Source
https://github.com/OpenSEMC
uploading
updating soon.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For now on...
got permission to port deedwar roms for XAS
it is:-
1- Beanstalk
2- Jellybeer
Bug list for now:-
1-no network at all
2-camera blank on potrait mode (still can capture)
**camera working good on landscape mode
3--galery blank on potrait mode (still can capture)
**galery working good on landscape mode
Reserve for changelog
and another onemore for future
Another good work.
Sent from my LT28h using xda app-developers app
-no signal (GSM) at all
-no extSD present
no signal (GSM) at all.Your phone is a pad?
I have used PA 2.53 and 3.10 on my ion. Infact the first Custom ROM I used on my Ion once I learnt unlocking, flashing pre-rooted ftf, adding recovery and backing up my working stock ROM was PA 2.53. Both the versions of PA ROM had the chronic problem of GSM and Data signal drop and overheating of device. I am skeptical of trying any PA based ROM because of my previous experience. However, i will be happy to try and test once the basic bug of GSM not working is solved.
nelikp said:
uploading
Click to expand...
Click to collapse
@nelikp,
I am giving you a friendly reminder that all ROM threads for releases need to be GPL compliant.
The ROM thread OP needs to contain a link to the source used in compiling a working KERNEL.
If you use a stock kernel, then link the stock source download.
If you have any questions, just PM me.
~JAB
Moderating from my Xperia ION on 4.1.2 & RooTED by DooMLoRD.
can you add a few more information to this Rom please? is it really android 4.2???
I think the problem is in the kernel.
Where did u get the 4.1 aoba kernel source?
Sent from my LT28h using xda app-developers app
goodnightPal said:
Where did u get the 4.1 aoba kernel source?
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
The kernel is lt26 mod for lt28.
I see could u give me a guide or source I would try port sg
Sent from my LT28h using xda app-developers app
goodnightPal said:
I see could u give me a guide or source I would try port sg
Click to expand...
Click to collapse
The SONY open source archive is:
http://developer.sonymobile.com/downloads/opensource/
This is the XS 6.2.B.0.200 source
http://developer.sonymobile.com/dow...es/open-source-archive-for-build-6-2-b-0-200/
I don't know if this is what you're looking for
goodnightPal said:
I see could u give me a guide or source I would try port sg
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
You can fix the bug of baseband?
I don't know I just try understand and build it if I can
Sent from my LT28h using xda app-developers app
goodnightPal said:
I don't know I just try understand and build it if I can
Sent from my LT28h using xda app-developers app
Click to expand...
Click to collapse
The sources of lt28 have not been rolled out yet.
@nelikp
Thanks for this build but is there any chance we can just get CM10.1? I keep seeing many CM derivatives even though i wasn't certain FXP has a working up-to-date kernel done... so how come Slim and PA keep popping up without a stable CM build?
thank you
twent4 said:
@nelikp
Thanks for this build but is there any chance we can just get CM10.1? I keep seeing many CM derivatives even though i wasn't certain FXP has a working up-to-date kernel done... so how come Slim and PA keep popping up without a stable CM build?
thank you
Click to expand...
Click to collapse
actually this is port from JellyBeer for XAS and base on OpemSEMC for ION BETA
Rom in my hand but I can't share it because @RaymanFX didn't give permission to share this port..
he only give permission if I compile from his source..
but I got really big headache when keep getting error
and maybe I can't share it at all..
sorry about that
RaymanFX working on his kernel to get working GSM
if u wanna feel the 4.2 android on your ION, feel free to download from "GENERAL SECTION " and look at openSEMC for ION
Hey folks, presenting ,
CyanAOSP for our beloved Samsung Galaxy S4 I9500
As mentioned in title, its based on CM10.2 build 20 by @doga.ozkaraca
BUG LIST:-
Same as dogas build
romcontrol.apk fc(almost gone)
sometimes settings fc(almost gone)
Paranoid settings fc( very rare)
cant connect USB to inernal storage(testing)
Sincere Request to Other PRO developers,
Please help in reducing above bugs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Link------》
Dropbox Link
Mega link
XDA:DevDB Information
[ROM][DUALBOOT] [4.3/ CM 10.2] CyanAOSP *29/08/2013*, a ROM for the Samsung Galaxy S 4
Contributors
Arjav23
ROM OS Version: 4.3.x Jellybean
ROM Firmware Required: Dualboot
Based On: CyanogenMod 10.2
Version Information
Status: Testing
Current Stable Version: v1.0.1
Stable Release Date: 2013-08-29
Created 2013-09-04
Last Updated 2013-09-04
CHANGELOG
V1.0.1
---storage issue fixed
V1.0
--Initial Release
Credits:
-intervigil and team
- @doga.ozkaraca
- @Grarak
-XDA
-Google
- @SpaceCaker
- @tabenf
- Let me remember more
FAQs
1) HOW TO INSTALL
Ans: This is a dualboot rom
You must have grarak's new dualboot app
download ROM
download latest gapps and make changes as grarak's thread
copy rom, modified gapps and perseus-alpha9 kernel on sd
Boot into recovery ( i recommend TWRP )
Flash ROM FIRST
THEN flash GAPPS
AND FINALLY PERSEUS KERNEL
NO WIPES
Reboot system and when entered your TouchWiz ROM, go to Grarak's rom switcher app and choose the AOSP 4.3
Enjoy:good::good:
Dwnld link added--->https://www.dropbox.com/s/xxpdo30uxglvsqb/CYANAOSPv1.zip
What about cam and random reboots?
As op says
The bugs of cm are alive
I will try again to port and remove other bugs
Sent from my GT-I9500 using Tapatalk 4 Beta
AFAIK
If u revert the updater script of this rom into a std non dual boot rom , u may not have problems
So if someone can try that and report back it would b nice
Remember not to dual boot in that case
Sent from my GT-I9500 using Tapatalk 4 Beta
Looks promising
Try to fix the storage problem u mentioned
G3cooldude said:
Looks promising
Try to fix the storage problem u mentioned
Click to expand...
Click to collapse
Wish fulfilled
V 1.0.1 rolling out mostly tomorrow
Changelog:-
All storage issues fixed
Settings fc is gone (idk how )
Romcontrol.apk fc is reduced ( 0 in last 3hrs )
Screens added to op:thumbup::thumbup:
Sent from my GT-I9500 using Tapatalk 4 Beta
V1.0.1 uploading
V1.0.1 out
Link------》 Click to Download
Is with New commits? Camera works now?
Sent from my GT-I9500 using xda app-developers app
Camera doesn't work. I think I saw you asking this in the discussion thread too. Well, if camera worked there would be some really intense activity going around on xda
@Arjav23 why is there a little Tapatalk icon in the lower right corner in the screenshots? Is it because you uploaded via Tapatalk or is it some cool notification thing?
Sent from my GT-I9500 using Tapatalk 4
Any random reboots?thats the only problem why I don't use cm.
@matheus_sc @Nasty_z @varund7726
It is with dogas build of I guess 26/08/2013
Camera doesn't work for clicking pics and shooting videos
U can take panaromas though
That tapatalk icon is because I uploaded pics via tapatalk app
Random reboots still there
A few , butthey are
Sent from my GT-I9500 using Tapatalk 4 Beta
Finally ........
Waiting for more ports buddy.
Thanks, works great!
Keep up the good work :good:
noideaforusername said:
Thanks, works great!
Click to expand...
Click to collapse
Thanks friends
Just got an email from dropbox that my links have been temporarily suspended due to excessive downloads
Sorry for inconvenience
doga.ozkaraca said:
Keep up the good work :good:
Click to expand...
Click to collapse
Sent from my GT-I9500 using Tapatalk 4 Beta
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOKP-ANDROID OPEN KANG PROJECT
What is AOKP?
AOKP stands for Android Open Kang Project. It is a custom ROM distribution for several high-end Android devices. The name is a play on the word kang and AOSP (Android Open Source Project). The name was sort of a joke, but it just stuck, just like our infatuation with unicorns.
We fork the source code of Android that Google puts out in the open with every major version release, and we then add the magical unicorn bytes (read: we add some of the coolest features that are both useful and make your ROM awesome).
With AOKP, you can generally do a lot more with your device than what you could do with the original firmware that came installed on it.
Why AOKP ?
We were waiting for when you'd ask this.
There are a variety of reasons why a hilly billy Android user, on a bright sunny day, would suddenly start using AOKP and loving it.
For one, AOKP is lightweight. Most OEMs provide a heavy UI layer over Android and have loads of bloatware (i.e. apps that not everyone use every day, but you cannot remove because they're "baked in" by default). Since AOKP is built upon vanilla Android source, it has neither of the above.
Also AOKP has features that you will not find on your stock firmware. You can have a multitude of toggles to quickly flip a lot of your phone's settings right at your fingertips, or you can launch apps quickly from any screen using our Ribbons.
You can change almost each and every aspect of the OS, from its looks to the way it functions, with total freedom. And did we tell you, AOKP helps you make tacos?
Download
AFH <MOD EDIT - DOWNLOAD LINK REMOVED.>
Instructions
Factory Reset/Wipe Data
Format System
Format Cache
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Sources
Kernel
Source Code: https://github.com/AOKP
AOKP is the best rom ın my previous device (HTC EVO 3D). I hope, this can be too. Thanks for developing new rom for our phone. Regards.
Hy
The rom support fast charging?
Sent from my LG-D802 using Tapatalk
amir628 said:
Hy
The rom support fast charging?
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
you can enable it from kernel
U can tell me how?..
Sent from my LG-D802 using Tapatalk
amir628 said:
U can tell me how?..
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
kernel auditor - battery settings
Ok, downloading, i try it!
Tnx bro
Sent from my LG-D802 using Tapatalk
amir628 said:
Ok, downloading, i try it!
Tnx bro
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
enjoy.. are you Israeli in any chance ?
Yes, why?..
Sent from my LG-D802 using Tapatalk
amir628 said:
Yes, why?..
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
me too
Nechmad...
Ata pitahta et harom?
Sent from my LG-D802 using Tapatalk
About the fast charging, in kernel editor i no see option to fast change
Sent from my LG-D802 using Tapatalk
Hello, this ROM is stable or in beta version? Thanks!
pickmod said:
Hello, this ROM is stable or in beta version? Thanks!
Click to expand...
Click to collapse
stable
So what's seems the most battery-friendly ROM among these for G2: beanstalk, slimrom or AOKP? Thanks.
new build released now with DU kernel
xdahero1 said:
new build released now with DU kernel
Click to expand...
Click to collapse
Thanks for update
Is there any work on Android 7.0 ?
blackcodetech said:
Thanks for update
Is there any work on Android 7.0 ?
Click to expand...
Click to collapse
maybe
Does the back led work with this rom guys?
@xdahero1
OP
Download link in OP is removed as discussed on PM. (Besides it wasn't really AFH Link anyhow.)