Hi Guys,
I wonder if you guys can help, I used to have an iPhone and just got an S4 but for some reason when I scan for devices it doesn't see the BMW in car phone system. Yet when I get into my wife's car it finds her parrot system fine. Does anyone have any ideas as I know my BMW system works fine. The car is 2011 3 series.
All help welcome.
Thanks,
Chris
Not sure about the 2011's, but for the 2012's I had to add phone first from the idrive before my phone would see it.
Related
Hi - I am a newbie here so be gentle with me
I have recently downloaded the rSAP enabling software from this forum to enable my Excalibur (HTC E600) to communicate with my in car BlueTooth system.
I have successfully established a pairing between the device and the car but it goes no further and I cannot enable phone functionality. I don't know if the issue is in the Excalibur or in the in-car system. Car is a VW Phaeton and their notoriously complex Bluetooth setup.
Has anyone seen this type of issue and, if so, any potential fixes. I feel so close to fixing this but just can't get that last bit done. Very frustrating.
Hope you can help
Thanks
I cant say . i dont have any issues with my bluetooth in my car. But or course, i have a 2008 ford focus with the MS SYNC system in it, which is hella cool and easy.
I am having problem pairing with different phones. If it does pair I will get an error or they will when files are being sent to me. Is anyone else having the same issue with Kavana´s WM6.1?
Can't seem to get my Nexus to read my phone book in my car. Wasn't a problem with my Galaxy S 1. With my SGS1 it would ask me for my password to read my phone's phone book but with the Nexus no promt ever comes up...
Any way around this?
No one has problems pairing like this?
I too have this problem, however if you've already rooted your phone then try backing up your pairings from your sgs1 and restore them to your GN. You might fail in this attempt since the file systems are different, but it wouldn't hurt to try.
My problem is that my GN is not able to see my car's phone! My car's phone was paired with my previous phone "N1" and i haven't rooted my GN. If you find any solution or suggestions please do share them.
Sincerely,
New Member of the GN Club
Solved My Problem
I paired my GN with my car. I never understood the pairing procedure till today.
Bluetooth pairing
I too am not able to pair the GN to the Parrott in my car.
My previous phone was an HTC HD2. Am I able to copy over the file from there too?
Morning All,
I'm currently running viper 3.7 stock kernel and im struggling with 2 handsfree systems.
I know when i first got my HOX it worked with the mini built in handsfree, it has since stopped and i get serve "static" noise
so i can barely hear the other person. As this is a works car I wasn't too fuseed, but ive just picked up a fiesta with the sync system in
and im having the same issue.
Does anyone else have an issue with factory fitted bluetooth systems.?
Thanks
Andy
Did you get the car from a dealership or buy it used or what? My wife has an explorer with factory bluetooth and the dealership walked us through setting up bluetooth, etc. The bluetooth connection there has no static that I've noticed. It's a 2013 though, so I don't know if Ford used the same bluetooth chips or not between different models/years. Might have to do some research online about your car.
Iceax123 said:
Morning All,
I'm currently running viper 3.7 stock kernel and im struggling with 2 handsfree systems.
I know when i first got my HOX it worked with the mini built in handsfree, it has since stopped and i get serve "static" noise
so i can barely hear the other person. As this is a works car I wasn't too fuseed, but ive just picked up a fiesta with the sync system in
and im having the same issue.
Does anyone else have an issue with factory fitted bluetooth systems.?
Thanks
Andy
Click to expand...
Click to collapse
I'd certainly try a couple more ROMS before I suspect the cars system to be honest. My old Wharfedale radio with built in bluetooth went very quiet as soon as I started using Jellybean ROMS ..But my new one with a Parrot module built in is fine.
Thnaks guys I deletes my pairing and cleared all my caches and it worked on the way home.
Will test again tomorrow. It's the new 2013 ford sync system, dealer did set it up with the wife's phone.
From what I've tested works really well speaks texts etc
A
Sent from my HTC One X using xda app-developers app
Seems to have sorted itself out after a fresh pair and a clear of all caches.
Problem solved - CASE CLOSED!
A
I have a new Fire Phone running the stock Fire OS 4.6.1, rooted and with Google Play Store Installed.
My vehicle is a 2007 Chrysler Town & Country with the UConnect feature built in. I have successfully paired my phone already.
The main issue is that I have to manually connect every time I get in the car. After I leave the car or the car is turned off, it disconnects as expected, just never reconnects automatically.
I just switched over from an iPhone 4 and this is a major inconvenience. WIth the iPhone it just worked. If I was on a call and got in the car, it would automatically switch over to bluetooth UConnect and come over the cars audio system.
Is there anyway to make this work properly? I have seen a couple apps in the Play Store that seem to state they can fix this, but I am a little weary of them. Like Bluetooth Auto Connect
Does anyone have any experience with this app or have any other general advice on this? Thanks in advance for any suggestions.
I did also check this thread with no real luck http://forum.xda-developers.com/showthread.php?t=1312576
drewb0y said:
I have a new Fire Phone running the stock Fire OS 4.6.1, rooted and with Google Play Store Installed.
My vehicle is a 2007 Chrysler Town & Country with the UConnect feature built in. I have successfully paired my phone already.
The main issue is that I have to manually connect every time I get in the car. After I leave the car or the car is turned off, it disconnects as expected, just never reconnects automatically.
I just switched over from an iPhone 4 and this is a major inconvenience. WIth the iPhone it just worked. If I was on a call and got in the car, it would automatically switch over to bluetooth UConnect and come over the cars audio system.
Is there anyway to make this work properly? I have seen a couple apps in the Play Store that seem to state they can fix this, but I am a little weary of them. Like Bluetooth Auto Connect
Does anyone have any experience with this app or have any other general advice on this? Thanks in advance for any suggestions.
I did also check this thread with no real luck http://forum.xda-developers.com/showthread.php?t=1312576
Click to expand...
Click to collapse
Does your car have multiple ways to connect a device to the car's stereo via Bluetooth? According to this post, using the steering wheel/voice commands makes a difference versus using the stereo's dials. Another post mentioning the same issue and fix for other phones and cars: https://discussions.apple.com/thread/6760095
Good evening, I am new to the Dasaita units
And love mine so far. I couldn’t get mine to connect with my iOS 14.2 I phone via apple car play.. Is there an update that anyone can provide to help me out? I did a restart on the unit and it will now connect via Bluetooth but has no car play icons etc anymore. I’m lost and could use some help. Thank you in advance!