Develop Bugs

[Q] T-Mobile Samsung Galaxy S II soft brick

OK I was trying to flash an unlocked kernal via ODIN last night, something went wrong and now phone is stuck on the phone--!--computer screen. I cannot get past this screen. vol+home+power doesn't do anything but loop to the same screen.
It shows ODIN MODE in red at the top of the screen, but ODIn won't recognize the phone, nor will Kies (not running at the same time). Computer makes USB connected/disconnected sound when I plug and unplug the phone.
I have tried One-Click Unbrick, did not recognize that phone was connected.
Help!!

which model of Galaxy S2 do you have?

T-Mobile SGH-T989

hose902 said:
T-Mobile SGH-T989
Click to expand...
Click to collapse
there''s currently nothing to flash this phone
it came out only 2 days ago
DEV are still working on finding root
so, the best suggestion is to take it back to the store and get it exchanged
or wait a few more days/weeks until a flashable release becomes available to fix the mistake

I know, I was hasty and now this. Even when there something available to flash, the device isn't being recognized by ODIN. Any troubleshooting help for this?

When I managed to get my Vibrant into that mode I could pull the battery, hold volume up, put the battery in, press and release power (still holding volume up) and it'd kick back into download mode everytime. Once in download mode I could plug the USB in and a running ODIN would see it pop up. If ODIN wasn't running and USB was already plugged in things wouldn't work right.
I haven't tried ODIN on the GS2 yet (I'll wait for a root ). I did find the vibrant nearly impossible to brick though... trust me I unexpectedly tried quite hard.
You might need the newest ODIN for GS2 support, and possibly newer drivers.

Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!

fix4tv said:
Hey, Hey, Hey...
My Story...
1. I got a TMO Samsung Galaxy S2
2. Tried to root
3. Used Odin to root and install ROM and referenced the following thread: http://forum.xda-developers.com/showthread.php?t=1095274
4. Realized phone models are not the same
5. Phone does not boot and nothing comes up on the screen
6. No lights or LED indicators (i.e. charging) HOWEVER....
7. ODIN recognizes the phone when I plug in the phone via USB
8. Tried to load stock rom:http://forum.xda-developers.com/showthread.php?t=1321811
9. ODIN gets stuck on <ID:0/005> SetupConnection...
10. I am unable to access SD Card for CWR
11. Next step? Return or exchanges are currently not an option.
Thanks in advance for the assistance!
Click to expand...
Click to collapse
I'm a bit new to this, but a custom ROM shouldn't affect your recovery mode. Are you sure you are using the correct buttons and methods to boot recovery?
Might want to make a new thread instead of necroing something from when the phone was 2 days old.

I have GT I9100 and done the same thing and got the same result . stuck at setup connection with odin
Please Help

Go into device manager when is plugged in and if it says qhd-usb or something like that its a hard brick. What tipped me off was you said it makes two noises when you plug in. that's a tell tell sign your hard bricked
Sent from my SGH-T989 using xda premium

soft bricked my phone (i hope)
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.

iamnoone626 said:
i have sgh-t989 (t-mobile) i am running a miui rom. it wont boot it just goes to miui boot up screen. i can go to the download mode but not recovery (how do u do that) but when im in downoad mode Odin dosnt recognize my phone. and my computer says it is an unknown device.
tried new wire, uninstalling re-installing kies, stopped all processes, diff computer tried to boot for a day, let battery out for a day, and a few other things.
please help and thank you.
Click to expand...
Click to collapse
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.

Alarmmy said:
You should try to uninstall then reinstall driver, and try another usb port. In my experience, Odin seems to be picky, it only recognizes your phone if you plug it in the usb port that you used in the first time.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
ok i have done this through kies is there another way that you can do this?
---------- Post added at 09:34 AM ---------- Previous post was at 09:26 AM ----------
nagoshi said:
Recovery is accessed by holding both vol + and - while starting the phone. Hold them both while pressing the power button, then release the power button when it vibrates, keep holding the vol buttons till you see the recovery screen.
Click to expand...
Click to collapse
when i do this it only takes me to download mode.

Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris

Sk3tchy said:
Have a look at http://forum.xda-developers.com/showthread.php?t=1513359
for a DL link for the USB Drivers
Cheers,
Chris
Click to expand...
Click to collapse
i tryed this but still odin does not recognize my phone. (no yellow box shows up)

Bricked my Galaxy Gio

Hi XDA,
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.

Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...

Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.

SuperUub said:
Thanks for quick reply but i can't go into download mode as i said. Also my phone is just totally off and won't boot at all. My pc also doesn't detect it when it is plugged in.
Click to expand...
Click to collapse
If not even adb detects it, i'm pretty sure you're buggered, mate.

did you try and leave the battery out for some 10 min or more?
If adb does not detect the phone after that, then it seems to be a brick for real.

Is your phone stop at the "samsung" when you turn on your phone?
If is this,it's very easy to unbrick

One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado

+
Yes this way usually works. I've tested this way.

that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.

Odin to detect
Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?

I had my mainboard replaced at a service center... Probably not the news you would have liked, but I'm afraid that's your next step as well.

Darkshado said:
One easy procedure which you might want to try with no guarantee it'll work:
-Remove the battery, microSD and SIM from the phone.
-Prepare the Odin software and your ROM on a known working system
-Connect the phone to the computer with the USB cable.
-With one hand, simultaneously hold Volume down, home and power.
-With your other hand, put the battery in the phone.
I was able to get Odin to detect an otherwise bricked phone this way. I was however unable to get further than the "setup connection" step. Maybe your outcome will be better.
Regards,
Darkshado
Click to expand...
Click to collapse
This worked for me too, try to charge your battery in another phone if possible

bobcota said:
i i need help, odin detects my phone but dont pass from -"setup connection", did you have news?
Click to expand...
Click to collapse
same problem

same problem here
voetbalremco said:
that worked for me to on a brick when it didnt even went on, no recovery, download mode etc, after waiting 2 weeks and trying to repair it myself I nearly throw it away, and then suddenly it went into download mode for about 1 or 2 seconds, wich told me the battery whasn't working.. so I started to charge the battery, and hoped it would boot, but it didn't.. using that method given above, I could get into download mode again, and flashes a new stock ROM. now I still have my phone, working.
Click to expand...
Click to collapse
i also have the same prblem here just now , i tried to flash this ROM but i forgot to wipe data/factory reset the phne and i unintentionally flashed the rom without wiping it :'( and now, dont boot at all but can still turned on and ended up just "samsung" appearing on the screen . please help :crying::crying:

I've bricked my Galaxy Gio when i flashed a custom kernel.
Hi There I also have the same problem. I installed Galaxy Ace's Kernel onto my Galaxi Gio, Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
S[B said:
[/B]uperUub;20668671]Hi XDA!
I've searched in many threads but i can't find an anwser.
I've bricked my Galaxy Gio when i flashed a custom kernel. It was the kernel in this thread http://forum.xda-developers.com/showthread.php?t=1319816
Now it does nothing, I can't boot in any mode, not in download mode, not in recovery mode...
I have android 2.3.3 Gingerbread.
Is there any way to unbrick or is my phone just an expensive decoration now.
Thanks in Advance.
Click to expand...
Click to collapse

Not either going to Download Mode
trackIDtracker said:
Hi !!!
same new here
This ll work in some cases
Hope this will work in your device as well
Pull the battery to kill the boot loop (or whatever is hosed up), put the phone into downloading mode and re-flash the stock ROM.
Free to try...
Click to expand...
Click to collapse

[HOWTO]Restore to Stock/Recover from a Bad Flash

THIS IS FOR SGH-T989 (T-MOBILE) ONLY!
This will restore to T-Mobile 2.3.6 ULKL1.
This guide is for those who screwed up a flash, need to return their phone, are selling their phone, or just want that stock new phone feeling again.
Prerequisites:
1) ODIN
2) USB Drivers
If you need your data backed up first, backup personal data with Kies and Application Data with Titanium Backup.
Steps:
1) Download THIS file and extract it. (Password is 'sampro.pl') --Source HERE.
2) Power off your phone and remove the battery. Re-insert the battery after a few seconds.
3) Plug the USB cable into your computer, without plugging it into your phone.
4) Hold VOL UP + VOL DOWN while plugging in the USB cable to your phone. Stop holding with 'Warning' appears.
5) Press Volume UP and start ODIN (Run as Admin on Vista and 7, just to be safe)
6) Click PDA and locate the MD5 file extracted earlier.
7) Press 'Start' and be patient. It will take a few minutes because it is a large file.
8) Unplug your phone after it has completed and rebooted twice.
Now everything is 100% stock! Kernel, System, Bootloader, and Modem are stock.
If you're going to sell the phone, or just return it, I advise you to do the following:
1) Go to Settings > Privacy > Factory Data Reset
2) Check Format USB Storage
3) Press 'Reset Phone'
4) Press 'Erase Everything'
This will erase EVERYTHING on your phone including your SD Card (External + Internal)
If you happen to have a bootloop, perform the following:
1) Boot into recovery (Power on phone while holding VOL UP and VOL DOWN)
2) Wipe Data, Cache, and Dalvik
3) Reboot System
If this helped you save your phone, please press 'Thanks'
And if you want to, DONATE (You aren't required to, it's just HIGHLY appreciated.)

and here I was getting ready to upload stock recovery backup of my tmobile gs2

Thanks man I was waiting for someone to post one of these tutorials up. Can't wait to see it done.

Thanks looking forward to this!
Sent from my SGH-T989 using xda premium

Waiting patiently...

Basically hold + and - and plug in the microUSB cable to get into ODIN mode
then select PDA and choose the STOCK ROM. Flash it.
THIS IS FOR 2.3.6 t-mobile KL1 baseband
for other stock ROMS 2.3.5 KID (t-mobile) and 2.3.5 KJ3 (Telus) please go to the bottom of this OP to DL them http://forum.xda-developers.com/showthread.php?t=1324517

Guide Done!

Sticky
This should be a sticky!!

gazment said:
This should be a sticky!!
Click to expand...
Click to collapse
Thanks haha

Update the OP and state that this is for T-mobile KL1 2.3.6

Bricked my phone
I tried this downloaded used pda slot and completly bricked my phone. wont turn on and when plugged in it reads a a usb Qsub_DLOAD

Shawnkanan said:
I tried this downloaded used pda slot and completly bricked my phone. wont turn on and when plugged in it reads a a usb Qsub_DLOAD
Click to expand...
Click to collapse
The steps posted by the OP look reasonable to me. I did basically* the same thing several weeks ago using the same .rar file and it worked fine. Maybe you had a bad download . . . is the file size 324,600,505 bytes? (*My phone doesn't require pulling the battery, and I always plug the USB cable into the phone last to get into download mode.)
Sent from my SGH-T989 using XDA App

Shawnkanan said:
I tried this downloaded used pda slot and completly bricked my phone. wont turn on and when plugged in it reads a a usb Qsub_DLOAD
Click to expand...
Click to collapse
Are you a t989 user? I don't see any reason for it to brick your phone if you have a successfully downloaded file and that it flashed successfully
Sent from my SGH-T989 using xda premium

Enough power to flash? I've never heard of Odin system requirements.
Sent from my SGH-T989 using XDA App

Odin keeps crashing while flashing the cache (cache.img.ext4). I am using Odin3 v1.70
I have the auto reboot and F. reset time checked. Any ideas?

Bricked my phone
Again I have flashed phones with ODIN ever since the Vibrant and never had an issue I downloaded the full file had plenty of power and followed the instructions and it failed multiple times then when I pulled the battery to see if it would boot it was done from then on out no Download mode, no recovery the phone does nothing! I plug it in and it shows in Device manager QHSUB_DLOAD and from what I hear its toast. So I wish everyone luck who tries this.

wj04 said:
Odin keeps crashing while flashing the cache (cache.img.ext4). I am using Odin3 v1.70
I have the auto reboot and F. reset time checked. Any ideas?
Click to expand...
Click to collapse
update: I decided to just flash a stock kernel found here
http://forum.xda-developers.com/showthread.php?t=1454321
and that solved the problem.

Shawnkanan said:
Again I have flashed phones with ODIN ever since the Vibrant and never had an issue I downloaded the full file had plenty of power and followed the instructions and it failed multiple times then when I pulled the battery to see if it would boot it was done from then on out no Download mode, no recovery the phone does nothing! I plug it in and it shows in Device manager QHSUB_DLOAD and from what I hear its toast. So I wish everyone luck who tries this.
Click to expand...
Click to collapse
that really sucks, you have the t989 right? are you sure the file downloaded completely? I was going to ask you to check the md5 for the file.. but there isn't one listed. The OP needs to be updated.

I'll add my vote of caution to restoring stock with ODIN and the SGH-T989, as I bricked mine as well. Luckily we're all still under warranty and they just replaced the main board and sent it back.
I think in my case it failed because with the Vibrant (I've flashed my Vibrant lots and lots) you always used a .pit file, and I didn't see a .pit file with the T989 stock reload I used (not this OP's file). So I hunted one down, and apparently I shouldn't have. Or maybe it just wasn't meant to be.
In any case be very careful!

Are you sure you followed this guide correctly? I did this EXACT same procedure a few days ago and it worked perfectly. Same file and everything. And the power notice is so your computer doesn't goto sleep or shut down while flashing.

[Q] [Cry] Galaxy Nexus bricked. (Dead fastboot, dead 3e recovery, only safemode

Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium

Reserved for updates

Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/

iowabowtech said:
Have you stumbled across this yet?
http://forum.gsmhosting.com/vbb/f63...-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/
Click to expand...
Click to collapse
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250

bk201doesntexist said:
thats omapflash, to be more precise.
op, try that. also, might want to read something more, efrant has a link on it on one of his threads.
sent from my i9250
Click to expand...
Click to collapse
Yup, tried it but its still the same. Fastboot still dosent work and relashing packaged factory images in odin dosent fix the fastboot
Sent from my GT-I9100 using xda premium

Saw a Jtag service nearby and thinking of sending it in. Its roughly after conversion from RM(Malaysian Ringgit) around USD$90. Possible recovery from the issue?
Sent from my GT-I9100 using xda premium

does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.

override182 said:
Searched all over and google yada yada yada. So i end up opening a thread here.
Hello guys/babes/kids/oldfags/ifags in disguise . I have a galaxy nexus here that will only boot into
-download mode,
- fastboot (not working at all, pc wont detect its fastboot and buttons all dead when in recovey/fastboot)
- safe mode - will boot into safe mode if i did combo buttons when attached to charger/pc
The story :
When i booted it from batt pull via only power button press, it will go into download mode straight and if i power off or factory reset in safe mode, it will reboot back into safe mode.
I cant flash anything since fastboot is broken. Ive tried Odin back to factory image of Galaxy Nexus GSM ICS and Jellybean but the prob isnt solved and fastboot is still broken. Tried repartition and bootloader update in ODIN yet still fail. And after every successful flash of repackaged stock, it will directly boot into safe mode (for both ICS and JB factory image). Why i didnt flash using fastboot? Fastboot is broken that is. Lets continue...
Other hardwares are still fine as in safe boot, ive tested all the buttons, display, calls, speaker etc. This is fastboot relate i believe as no matter what pc ive tried and all types of gnex drivers i tried. It wont even fart when connecting to pc(win7 x86). ADB works fine though when i booted into the safe mode. Im able to do adb stuffs but whenever i query it to reboot to fastboot or recovery, a dead end again. OMAPflash the tuna edition for omap4460? Tried yet still the same.
Additional facts : The phone was not unlocked and tempered by any way before the prob happened but now the bootloader is unlocked after i flashed the repackaged ODIN (chainfire posted it)
So XDA Gnex'ers, LET THE HUNT BEGIN!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.

chadouming said:
First of all, bricked mean there is nothing beside a black screen. Nowaday device are hard to brick. second, One does not simply flash a gnex with odin. It's simply a big wtf that is shining through my head. 3rd, if fastboot is not working, it's because it need a special driver that i suppose you didnt install. If you can boot your phone in fastboot but can connect to it, it's because you have a broken USB port, which is not the case since you can access adb. 4th, i'm still trying to know how you achieved this. It look to me you were following some instruction and it either ended, tl;dr i will skip a few step, hope it will work which didnt or you missed electricity. Install Kies, get your phone in download and recover your phone from it. Never attempt again to play on custom rom. Man, how can someone derp a galaxy nexus, it is like the easiest device to work with.
Click to expand...
Click to collapse
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
killersloth said:
does it try to create an error log? or are you able to pull bug report?
it boots into download mode and safemode so, there's hope.
Click to expand...
Click to collapse
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium

override182 said:
Thx for the reply.
Some clarification here, im not the owner of this phone. Im using 9100 and im just helping a friend to recovery. Ive tried few pcs and it wont even fart when i plugged in during fastboot or recovery (i read someone that in recovery you can do some commands) but the pc(s) wont even detect a hardware being plugged in.
Plus, in fastboot, i cant press any of the hardware keys. No vol up or vol down and the power button dosent work in recovery. I only got to the 3e stock recovery via 'adb reboot recovery' during in fast mode where it booted into the relaxing chillin android with the triangle + red exclamation mark on its tummy. Pressed all buttons and it went to the 3e recovery.
At the 3e, only power button works. I cant toggle a bit using the vol keys. Note that the vol buttons work to boot the phone into fastboot and download mode and also during safe mode, all the keys works flawlessly.
So, i tried the odin method to recovery this living Gnex but with a faulty heart and kidney but it will still boot to safe mode regardless of ICS or Jellybean.
How did this happen?
I have no idea. The owner of the phone claimed that he has never rooted or tempered it in any way. Plus it was still on ICS when i first got the phone (all data was still intact but it was in safe mode at that time).
Regarding drivers, ive attempted many pcs with almost every drivers available. Shall i list em here:
- KIES
- Naked Nexus drivers
- PDA.net
- the 'official' gnex verizon driver set which is said working on GSM devices etc.
Tried those and adb+download mode works fine. Pcs detect em and tried to install the hardware n search for the drivers but not in fastboot. Its just dead.
Adb works fine so im able to pull anything when its booted. Im not sure if we can pull anything in download mode. Adb/fastboot didnt work in download mode. Am i correct? Mind to share some light here on this. And in fastboot, none. No vol keys to operate and the 4-5 pc ive tried wont even fart a sound or hint anything saying a hardware connected. Its like its a dead circuit plugged only in fastboot.
This is quite a super rare case here. Most of the dead gnex i found on the next and also in XDA has a working fastboot that only needs drivers to make it working but on this unit, even the vol keys is dead. Awkwarddddd
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it. Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options. But that would be strange that adb work on safe mode. There is probably a way to that with adb but you will have to google it. Tell your friend to follow instruction next time. And ffs, do not use odin ! (Little idea too, try to get in fastboot not connected on PC and wait a few minutes then see if you can move with the volume button, then try to connect it on pc)

chadouming said:
Great to know you are not the one who did that . So if i understand correctly, you say download mode work ? If yes, flash another stock rom from chainfire using odin. No one wan't to flash with odin, but if fastboot is not working, you shall at least try it.
Click to expand...
Click to collapse
Yes i have already did that few times. Few times of ICS factory image and few with JB. All are repacked version provided by chainfire. Its the full package not the software only with stripped bootloader n recovery. Its still the same
Sent from my GT-I9100 using xda premium

http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work

killersloth said:
http://forum.xda-developers.com/showthread.php?t=1392310
download and install toolkit from that thread ^^^^^^
uninstall all gnex drivers you installed
reboot pc, open gnex toolkit, with phone unplugged install the drivers
fastboot should work
Click to expand...
Click to collapse
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium

override182 said:
Thx, tried it on a few pcs but it still wont work. Even the volkeys in fastboot didnt work :8
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?

killersloth said:
did you try flashing google's factory image in odin??
my fastboot once was unresponsive, but rebooting into it fixed it
from safemode, if you adb reboot bootloader it is unresponsive?
Click to expand...
Click to collapse
Yes i had, still boots to safe mode and the fastboot is still dead. Yes ive tried adb reboot bootloader but its dead in fastboot, again.
Sent from my GT-I9100 using xda premium

only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.

Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639

killersloth said:
only suggestion left is to just boot into fastboot, leave it alone for awhile (5-10 mins), then try and plug it in and mess with it.
Click to expand...
Click to collapse
Tried yesterday, nothing happened
Sparx639 said:
Try doing the whole driver thing mentioned above but instead of flashing a Google image just do the boot loader portion, what settings are you using to flash in Odin?
Sparx639
Click to expand...
Click to collapse
First tried pda only with auto reboot, no gooding. The i tried with booloader, no good. Then bootloader only, still no good. Then i tested all including pit file, still no good.
Update, sent in for Jtagging few min ago. The phone is not with me now and ill get it back in 3days working or not. I shall report in back after 3 days. Thanks to all by giving suggestion and ideas. See u guys again in 3 days
Sent from my GT-I9100 using xda premium

chadouming said:
Also, when you are putting the phone in download mode and connecting it to kies, it should detect it has to be restored. i would say the main reason for it to not work is that android debugging is not ticked in developer options.
Click to expand...
Click to collapse
adb does not work in download mode/bootloader. adb only works when adbd (adb service) is started, and that happens in android boot process. it means android debug bridge.
sent from my i9250

Sorry for the long delay to anyone waiting for the answer/status.
Jtag cant fix it. Returned the device to a friend. Prolly a mobo replacement is the solution but its damn pricy here in Malaysia. It costs 80% of the price to get a new Gnex.
Hell yeah and thx to everyone supporting this.
Sent from my GT-I9100 using xda premium

[Q] [Help] How to fix SGT 3 10.1 (WiFi) not turning on

Hey guys, My Samsung Galaxy Tab 3 10.1 (Wifi) Won't turn on anymore. Don't even charge! My brother was playing minecraft until my Tablet's life reach 0% (Died). Then I charged it, It's still charging after 30 mins of charging I turned it on then the SAMSUNG GALAXY TAB 3 logo appear (Start-Up) but it fails like it shutted down. I tried charging it again but it wont charge anymore nor turn on, I'm not using any ROM but i rooted my SGT 3 10.1
Anyone knows how to fix this? Please help asap!

Try different charger, usb cable, leave it for a while then try charging it, plug it into computer usb port or plug out sd card then try
Sent from my SM-T210R using Tapatalk

Ripshock said:
Try different charger, usb cable, leave it for a while then try charging it, plug it into computer usb port or plug out sd card then try
Sent from my SM-T210R using Tapatalk
Click to expand...
Click to collapse
Okay, Gonna try those now and hope something will fixed this. I'll reply if it works or not soon
Edit :
Be right back in 2 hours to check everything.
Edit Again :
My Tablet is fixed now, Thanks dude.
What I did is stopped charging for 10 minutes then i charged it using PC/Laptop then waited 1 hour, then charge it on normal then it started to charge and turned on. but again, stuck on SAMSUNG GALAXY TAB 3 logo then shut down....

None of those works. Any other idea?

I would do the process over again. But do not start the tablet. See if you can get into recovery mode (Vol+ / Power) or download mode (Vol- / Power). If that is successful then leave it there for awhile. Power off and try again. If good, then I would reload the OEM Rom or a backup that you may have. But I would not try powering the unit again. There might be a corrupt file caused by the initial improper shutdown.

It got even Worse, I tried to do the process again but it DOESNT turn on or Charge anymore. I waited 1 hour then charge, still, charge 2 hours, still. What to do now? Theres no helper here on our village except me so please help me

If your device is not charging then I wonder if it is the charger and not the device. I don't think the battery could go bad that fast. I could be wrong, but I don't think. So that leads me to believe that your charger possibly is not working like Ripshock mentioned.
Is the charger the OEM that came with the Tablet?
If not, can it produce 5vdc @ 2 amps?
What about the USB cable, is it OEM that came with the Tablet?
If not, is it wired correctly and can it handle 2 amps?
Regardless of how you answered the questions, I would seek another source for charging. I don't think the PC will charge. I don't believe the USP ports are setup to handle that much current. I could be wrong, but again, you might seek out another source for charging.

UPC won't charge tab. It has to be plugged into an eletrical outlet
Brian D said:
If your device is not charging then I wonder if it is the charger and not the device. I don't think the battery could go bad that fast. I could be wrong, but I don't think. So that leads me to believe that your charger possibly is not working like Ripshock mentioned.
Is the charger the OEM that came with the Tablet?
If not, can it produce 5vdc @ 2 amps?
What about the USB cable, is it OEM that came with the Tablet?
If not, is it wired correctly and can it handle 2 amps?
Regardless of how you answered the questions, I would seek another source for charging. I don't think the PC will charge. I don't believe the USP ports are setup to handle that much current. I could be wrong, but again, you might seek out another source for charging.
Click to expand...
Click to collapse

tones160 said:
UPC won't charge tab. It has to be plugged into an eletrical outlet
Click to expand...
Click to collapse
As I suspected, but I thought I read somewhere that the PC can be setup to do just that on the USB port. Key phrase is "thought I read".

Nah. For some reason the tablet can't charge and transmit data through the cable at the same time unlike our phones and other devices. Personally i think it's stupid that it won't charge but hey that's how they were made lol. I use a very good cable too.
Brian D said:
As I suspected, but I thought I read somewhere that the PC can be setup to do just that on the USB port. Key phrase is "thought I read".
Click to expand...
Click to collapse

Well, I have been to this situation more than once (Galaxy Tab 3 10.1 and Galaxy Tab 2 7.0, which are both family tablets). Do a "force boot"
Steps:
1.) Leave it there for, like, 4 hours or while it is charging do step 2.
2.) Now, press the power, volume up, volume down and home button together, until the it boots up completely
3.) Charge the tablet again..
Easy as that.. If that does not work, remove the battery inside (You need to have proper tools and a hand that can search youtube)
or, even if that does not work, your brother may have screwed something up (Either by dirty flashing another ROM or by doing some dangerous system modifications).. Your last hope is the repair shop (If you have warranty, send it back to a SAMSUNG REPAIR SHOP and act dumb, they will fix it for you, free of charge.)

I am not 100% sure here, but I don't think pressing the home key while using the power and vol keys will do anything. I believe that to be a process found on some of the other Samsung devices, but not the P5210. I personally have not tried it and I really don't want too knowing right now that my machine is working just fine. Would hate to do something that I cannot reverse.

- Mᴏʀᴏɴ - said:
Well, I have been to this situation more than once (Galaxy Tab 3 10.1 and Galaxy Tab 2 7.0, which are both family tablets). Do a "force boot"
Steps:
1.) Leave it there for, like, 4 hours or while it is charging do step 2.
2.) Now, press the power, volume up, volume down and home button together, until the it boots up completely
3.) Charge the tablet again..
Easy as that.. If that does not work, remove the battery inside (You need to have proper tools and a hand that can search youtube)
or, even if that does not work, your brother may have screwed something up (Either by dirty flashing another ROM or by doing some dangerous system modifications).. Your last hope is the repair shop (If you have warranty, send it back to a SAMSUNG REPAIR SHOP and act dumb, they will fix it for you, free of charge.)
Click to expand...
Click to collapse
Yep, I did those steps. and it's turning on now. but i cant start it up. When I open it, it goes to TWRP mode. This happens when I wipe all my phone cache,dalvik,etc (everything) then when i restarted the system it says "no OS installed, still continue?" I choose yes, then it said "your tablet's root could be corrupted, want to install a fresh new one?" I choose yes then my tablet restarts but on TWRP again, I install a rom named Pimpdroid then restarted the tablet, still the same (Always go to TWRP mode even i'm not press power+up volume+home bottom together) Just the power button but it goes to TWRP mode, i tried installing other roms but its still the same. If you can't understand properly due to my poor english. I can make a video on it if u r willing to help me. I really need help guys since theres no repair shop here its just an island!

Does anyone experienced this problem already? or does anyone knows how to fix this problem? Help me please

RazerKnight17 said:
Yep, I did those steps. and it's turning on now. but i cant start it up. When I open it, it goes to TWRP mode. This happens when I wipe all my phone cache,dalvik,etc (everything) then when i restarted the system it says "no OS installed, still continue?" I choose yes, then it said "your tablet's root could be corrupted, want to install a fresh new one?" I choose yes then my tablet restarts but on TWRP again, I install a rom named Pimpdroid then restarted the tablet, still the same (Always go to TWRP mode even i'm not press power+up volume+home bottom together) Just the power button but it goes to TWRP mode, i tried installing other roms but its still the same. If you can't understand properly due to my poor english. I can make a video on it if u r willing to help me. I really need help guys since theres no repair shop here its just an island!
Click to expand...
Click to collapse
When it asked to reinstall the root, say NO. Then power off the unit. Do not try and run the tab at this time. There is no OS. Start the tab in download mode. Connect to PC and start ODIN. Load the OEM Rom. This is the only way to get things back to normal unless you have saved a backup. If you have a back up, then start the tab in recovery mode (TWRP/CWM) and restore from backup.
I would recommend NOT installing Pimpdroid or any other rom until you have a fully operational tablet again. Best to always start from a fresh OEM Rom.

What is OEM Rom? and where can I download it?

OEM = Original Equipment Manufacture
OEM Rom is the firmware that was developed by Samsung and is the only official Rom for your device. All the other roms that are developed here are done so with caveats placed on them. Mainly that the roms can damage your device or brick it (cause it to fail completely).
Original firmware (OEM Rom) can be found here. In the search window just enter the model number of the device you have. In this case that would be P5210. It will take several hours to download the rom as it is huge, on the order of 1.9GB. Just be patient. It is always a good idea to have the OEM Rom safely tucked away on you computer for situations like this.

Brian D said:
OEM = Original Equipment Manufacture
OEM Rom is the firmware that was developed by Samsung and is the only official Rom for your device. All the other roms that are developed here are done so with caveats placed on them. Mainly that the roms can damage your device or brick it (cause it to fail completely).
Original firmware (OEM Rom) can be found here. In the search window just enter the model number of the device you have. In this case that would be P5210. It will take several hours to download the rom as it is huge, on the order of 1.9GB. Just be patient. It is always a good idea to have the OEM Rom safely tucked away on you computer for situations like this.
Click to expand...
Click to collapse
It's just like a rom? after downloading ill just install it like other roms?
and, Which country firmware should I download? There are tons of Country but the same rom

You will download the version for your country. I have no information about your whereabout. So you will have to find the rom for your country or region of the world.
You will need to extract the MD5 file from the zip and place it on your computer. Once extracted, you will open ODIN and load the MD5 file into the PDA slot and upload it to your device. Don't worry about the SS_DLL file. It will take some time to load into ODIN and then some time to load into your device. Do not stop the upload or interrupt. Once loaded, you will then restart your device and configure it like it was brand new out of the box.
The standard recovery will be loaded also. If you desire to load TWRP or CWM, you can if you want. You can also root the device. But I would not recommend loading any of the other roms until you get a better understand of what that rom does and how to load it. There are many posts on XDA that tell you how to load an OEM (stock) Rom. Just do a search for them. No need to be redundant here.
Just be careful.

Brian D said:
You will download the version for your country. I have no information about your whereabout. So you will have to find the rom for your country or region of the world.
You will need to extract the MD5 file from the zip and place it on your computer. Once extracted, you will open ODIN and load the MD5 file into the PDA slot and upload it to your device. Don't worry about the SS_DLL file. It will take some time to load into ODIN and then some time to load into your device. Do not stop the upload or interrupt. Once loaded, you will then restart your device and configure it like it was brand new out of the box.
The standard recovery will be loaded also. If you desire to load TWRP or CWM, you can if you want. You can also root the device. But I would not recommend loading any of the other roms until you get a better understand of what that rom does and how to load it. There are many posts on XDA that tell you how to load an OEM (stock) Rom. Just do a search for them. No need to be redundant here.
Just be careful.
Click to expand...
Click to collapse
Well, This is pretty weird. There's no Philippines (Which is my country) OEM rom and on the Tablet, it wont go to Recovery mode or Download mode. because when I charge my tablet it automatically opens then go to TWRP. When i turned it off it goes to normal charging. Then when I try to open it using this (Power button+volume up+ Home) it still goes to TWRP mode. How to fix this?