OK so I rooted my Nexus 7 last night and installed ROM Toolbox to be able to manage the CPU. Was just wondering if anyone else is doing the same and what speeds you've adjusted too? I've found that ROM Toolbox will only let the max CPU speed be adjusted and applied on boot and the min CPU speed always resets to 1026 even if you change it and check apply on boot. Anyone else having this issue? Currently I have my CPU set at 1350ghz max and 1026 min.
Sent from my Nexus 7 using xda app-developers app
TADitto said:
OK so I rooted my Nexus 7 last night and installed ROM Toolbox to be able to manage the CPU. Was just wondering if anyone else is doing the same and what speeds you've adjusted too? I've found that ROM Toolbox will only let the max CPU speed be adjusted and applied on boot and the min CPU speed always resets to 1026 even if you change it and check apply on boot. Anyone else having this issue? Currently I have my CPU set at 1350ghz max and 1026 min.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I doubt you'll be able to mess with that until a custom kernel is released, and then you flash it..
tweaked said:
I doubt you'll be able to mess with that until a custom kernel is released, and then you flash it..
Click to expand...
Click to collapse
I've never had this issue with any of my other devices running on the stock kernel. I've always been able to change max and min CPU speeds. Obviously the max is set by the kernel as is the min CPU speed available but you should still be able to under clock the max and min CPU speeds any where in between those set speeds of the kernel.
Sent from my Nexus 7 using xda app-developers app
Installing SetCPU was the second thing I did after rooting (adblock is always first) and my settings survive reboots no problem... Max and min stay where they should, as do the governor and scheduler.
When I first opened the app and detected settings it did have the min up at 1026 like you say, but has stayed down since I changed it.
s7yl33 said:
Installing SetCPU was the second thing I did after rooting (adblock is always first) and my settings survive reboots no problem... Max and min stay where they should, as do the governor and scheduler.
When I first opened the app and detected settings it did have the min up at 1026 like you say, but has stayed down since I changed it.
Click to expand...
Click to collapse
Yeah I switched from ROM Toolbox to SetCPU and haven't had the same issue. SetCPU has allowed me to switch the max and min CPU speeds along with governor and scheduler. Weird that ROM Toolbox wouldn't hold my setting, never had that issue before.
Sent from my Nexus 7 using xda app-developers app
Related
When I have beastmod flashed alone (pretty sure its using stock kernel) and when I flash jugs .02 kernel. no matter what I set it at while using demand governor my min frequency keeps going to 384 on my first cpu. my second does seem to stay at 918 which is what I set it it at.. Is this normal?
Tried using setcpu and system tuner . both have same effect except set cpu min slider will stay at where I set it, system tuner will revert to 384
anyone have any idea? driving me nuts.
Sent from my SGH-T989 using Tapatalk
Mine does the same on both apps only difference is with system tuner is that sometimes the min actually goes higher to about 1.5 but then I close it and check again and it's back at 384 while the second CPU stays at where I set it..
Sent from my SGH-T989 using Tapatalk
I am on both jugs and beastrom and my overclock/underclock stays what I set it at but I do know that my brightness settings go back to automatic every time I reboot even though I set it on minimal brightness.
I am only using set cpu so maybe I'll advise removing tuner app
Sent from my SGH-T989 using XDA App
no6969el said:
I am on both jugs and beastrom and my overclock/underclock stays what I set it at but I do know that my brightness settings go back to automatic every time I reboot even though I set it on minimal brightness.
I am only using set cpu so maybe I'll advise removing tuner app
Sent from my SGH-T989 using XDA App
Click to expand...
Click to collapse
I was using setcpu before I tried tuner. I know ur slides stay the same but when u switch outta the app and go back is ur mhz displaying 384 or ur minimum
Sent from my SGH-T989 using Tapatalk
anyone have any idea why this happens?
I have the same exact thing on juggernaut 2.0 running synergy kernel 0.02. On another note I also have solved the problem with the brightness (I think) by just going into settings and adjusting it manually in display rather than using a brightness widget or some other way to adjust it.
I'm having the same problem on SkyICS RC7 Speed w Faux kernel. Max settings stays put, minimum setting resets to match it. If I sit on the setting screen in system tuner, it works fine. As soon as I back out of the screen, it resets.
Just bought it but I don't really get it. Both the max and the min. Are at 1.5 set on on demand but at the top it says 384 mhz (I'm guessing that's the current clock speed since I'm not doing anything) don't know which one to trust. should I set the min. at 384 ?
Sent from my SGH-T989 using XDA App
Set the min at 384 and the max where ever you want. Stock is 1.5. You can underclock or overclock (if your kernel supports it). If you overclock dont check set on boot til you have played around with your phone and are sure that your phone can handle it. You can choose what ever governor works best for you. Conservative is best for battery, performance is the worst. Most people go with on demand, but your results may vary.
I've found that the smartassv2 governor gets me the best results.
But its very unstable and can cause crashes.
GreggoryD502 said:
Set the min at 384 and the max where ever you want. Stock is 1.5. You can underclock or overclock (if your kernel supports it). If you overclock dont check set on boot til you have played around with your phone and are sure that your phone can handle it. You can choose what ever governor works best for you. Conservative is best for battery, performance is the worst. Most people go with on demand, but your results may vary.
Click to expand...
Click to collapse
thanks man i just dont know why it doesnt say 1.5 at the top since both the max. and the min. are at 1.5 maybe its a bug or something or maybe thats how it is
ps i hit the thanks
Try clearing the data on set CPU and then uninstalling and re -installing. If that doesn't work, but into recovery and wipe data and wipe dalvik .
Sent from my SGH-T989 using xda premium
Or if that doesn't work go into your superuser app and hit menu, then preferences and update your superuser binaries. Sometimes if they are out of date it can cause issues with set CPU.
Sent from my SGH-T989 using xda premium
Ok will do that
Sent from my SGH-T989 using XDA App
GreggoryD502 said:
Or if that doesn't work go into your superuser app and hit menu, then preferences and update your superuser binaries. Sometimes if they are out of date it can cause issues with set CPU.
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Yup u were right just needed to update my binary su files
Sent from my SGH-T989 using XDA App
glad that worked out! nothing worse then paying for an app and it not work right!
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
you need to tick "set when boot" setting.
中国人正在尝试提高！
(translation:Chinese people are trying to improve themselves！)
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
AlwaysDroid said:
Hey guys, i got cyanogen mod 7.2 installed on my phone, and whenever i tried to change the max cpu speed from the settings, it would now work after boot. Most of the market programs i use freeze as soon as i try to apply my changes. I got "No-frills Cpu control" to work once, so i made it 844 max clock speed. (I confirm using android system info app"). EDIT: after another frozen reboot, the clock speed has gone back down to 787 again -_- . So frustrating!!
So i was wondering, which app do you use to overclock your gio that doesnt freeze?
Click to expand...
Click to collapse
chris_toni said:
set your cpu, mark the set on boot, reboot it
Sent from my GT-S5660 using Tapatalk 2 Beta-2
Click to expand...
Click to collapse
Use set cpu..
U can set diff profile w/ that
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Best app for my Gio is Antutu CPU Master.
Set your overclock, thick set on boot and reboot your phone!
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
AlwaysDroid said:
Alright, so i got my max set to 864 and min to 245, and while im using it i get a bunch of random reebots every 3 min, and one sleep of death where it wont wake up unless you pull battery -_-. Using built in overclock still
Click to expand...
Click to collapse
Try to decrease the max profile...
@wiwid_colgate
Galaxy Gio S5660
#GalaxyICS
Note that every clock speed your device can handle is different, just try out wich is stable for you
Sent from my GT-S5660 using xda premium
use set cpu.set max 844 is good for gio then tick "set on boot"
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
voetbalremco said:
Possible. But smartass also gives more performance than ondemand governor
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
I'll have to try that, I am using on-demand currently
Which is the best governor for gaming performance?
Performance or smartass v2
Sent from my GT-S5660 using xda premium
For performance the best governor is "performance". It causes that processor overclocking is always the highest. It means that if you have overclcked processor at 921MHz, with this governor phone will always work at 921MHz. But don't use it, it drains battery as hell
The best governor for daily use is SmartassV2, because it's balance between performance and battery
And sorry for my English :|
Na szczęście jest TapaTalk
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Now I just use the On demand governor. Smartassv2 drains my battery pretty fast
Sent from my GT-S5660 using XDA
mnhs1010 said:
which 1 is best for daily uses????
i am using smartassv2 but sometimes my phone becomes very very slow takes 1mint to slide the status bar phone apps etc.....
what is i/o schedular??? is it effect the speed?? which 1 is best???
Click to expand...
Click to collapse
any 1 answer me plz????????
fittono
Yup,any overclock will drain your battery quicker,this is very logical as you consume more power,right?I use No Frills CPU control,and i have my galaxy Gio set to 921 Mhz....! It realy works like asmall little pocket rocket now...I was already very satisfied with the price/performance ratio of this cheap little phone,but now with this stable OC it really hits it out of the park!!!No complaints from me about this phone..I'm gonna try and achieve an even higher oc,but it's really not a must,just want to know how far i can push it.No Frills has a benchmarker impemented ,very handy.
khanhtrinh said:
I feel that the Smartassv2 cpu profile consumes more battery than the On demand one. Anyone here think the opposite?
Sent from my GT-S5660 using XDA
Click to expand...
Click to collapse
That's true. But smartass is just like balance between perfomance and battery drain, which makes it the best governor
I'm new to the Galaxy Nexus and I'm coming from an OG Evo that I was using SetCPU with....
I wanted to see if anyone could recommend settings for the Kernel Updater...I'm looking to keep the battery going as long as possible in between charges.
also, if I use this app then I don't need to use SetCPU, correct?
no you dont need set cpu.. everything u need is within that app.
zephiK said:
no you dont need set cpu.. everything u need is within that app.
Click to expand...
Click to collapse
yea that's what I figured.
any setting recommendations?
I tried a few but just wondering what others are using...
I use default and it goes pretty good
Sent from my Galaxy Nexus using xda premium
broad_st_bully said:
yea that's what I figured.
any setting recommendations?
I tried a few but just wondering what others are using...
Click to expand...
Click to collapse
I personally use 192 to ~1200 MHz. With SmartReflex on (disable it if you want to do custom UV).
Play around with Generic Hotplug. It may be good for you and it may not.
I have my governor set to ondemand (it was on interactive but Franco recently changed it back to ondemand as default)
TO EVERYONE WHO USES franco.kernel updater
Please be aware that the "Turn off Thermal Throttling" feature in the latest franco.kernel updater app actually Turns on Throttling down CPU frequency when it reaches more than 70 degree C.. So just remind it that it is Vice Versa
I use ondemand governor, 384 min 1420 Max. Battery life is quite gd for me
Sent from my Galaxy Nexus using Tapatalk 2
Im currently on JMT v9, and want to lower my max CPU to 1512Mhz. Ive tried using the included Voltage Control Lite...slide my max freq down to 1512, then hit apply changes. Ive also tried using AnTuTu CPU Master Free...again, slide max down to 1512 and hit Apply. Also set it to apply upon reboot, which I have done, and it goes back to 1728.
Any ideas?
Faux kernel? Download CPU spy. I'm on clones drones, although set CPU doesn't show the changed Max freq, CPU spy shows the phone never goes above what I've set. If that makes sense
Sent from my SGH-T989 using xda premium
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Rod3 said:
Your thread title says under volt but it appears you want to underclock. Try system tuner or ROM toolbox.
Click to expand...
Click to collapse
Yes underclock my bad.
Tried system tuner, pulled the slider down to 1512 and it pops right back to 1728 lol
Sent from my SGH-T989 using xda app-developers app
Well i just read in the jmt thread this may be an issue with the kernel...others can't set at 1510 either. 1458 works tho
Sent from my SGH-T989 using xda app-developers app