I basically want to stuff aroudn with my play while I wait for a new Flex cable (replaced digitizer and touch ghosting has gone, but noticed that the flex cable is worn a fair bit and if I press the slider forward just ever so slightly the phone screen backlight turns off. So I'm assuming I'll need a new flex cable, going to get a new housing for my play too, or just end up selling this 1 and buying a brand new 1 once i've had my fun fixing/tinkering this 1.
Related
Hey There,
I am attempting to try and fix my phone because it has multiple problems associated with it such as a nonfunctional power button, a faulty in-call speaker, and blind spots within the digitizer that are unresponsive.
My guess is that the prior owner dropped the phone and some damage was sustained to the flex cable/pcb which runs to all of these things causing the phone to have some broken connections here and there.
I plan to use a teardown/repair guide to use this, BUT!
Does anyone know what else might be the problem, and where can I find a replace flex cable/pcb and how much do they usually go for?
I live in Canada...
Appreciate it.
You can get them off ebay for ~50 USD. ebay item number 260744426322. It's from China and will take forever but that's about it. Sounds like a flex cable though, hopefully it doesn't need a new digitizer too.
Hi dear developers!
I got a Touch Pro 2 from a friend, it's a GSM device he bought in Germany (O2). I changed a few parts but messed the main flex cable. The part from the power button is not connected anymore, a clean cut through, no repairs possible as far i think. So i bought a new one over ebay from Hong Kong. The seller told me it's for a GSM device BUT the cables do not look the same. The production date is 2008 and the damaged one was produced 2009. I built everything together and now the big surprise:
Phone boots normally but when the Home screen appears, it is always in landscape mode. No matter if the phone is closed or the keyboard open. I can only change the screen over advanced tools, but after soft reset again only landscape mode. The buttons for calling also do not work (those two down on the screen when you want to call someone or end a call ---> no reaction).
A hard reset and new ROM (energy) didn't change anything. By the way, the keyboard only fires up after pressing a button. Before it automatically lightened up after sliding.
What the hell is wrong now, did the send me a CDMA cable? Where is the difference ? Please help me i do not want to spent another 30 bucks again for a proper flex cable.
Edit: I disassembled the phone again and took a closer look on the flex cable: the lower part (with the LCD connection etc) looks quite same except for 3 or 4 transistors and their position on the PCB. The upper part with the earpice looks way different. The positioning of the single parts is not the same. But how can that interfere ? Guess there is no problem with the mainboard or the LCD (which is brand new).
Here are some pictures
h**p//img28.imageshack.us/img28/1514/image2sh
h**p://img849.imageshack.us/img849/8167/img1609m.jpg
OK, i solved the problem. The guy who sold the flex cable sent me a older one as I described. This thing was fully responsible for the errors. Bought a new one and everything works fine now^^ So if you ever want to change your Flex cable take good care which one you buy (especially on ebay!)
Btw: The display and the digitizer are glued and IF you want to replace any of those two, do yourself the favor and buy the complete bundle !!! I made the mistake and tried to replace the digitizer and cracked the display. There is no way as far as I can say, that you can manage this.
Bye
Can u post the seller info? Im in the same situation w a different phone... Thanks
Recently, I disassembled my Sony Ericsson Xperia Play R800at. I was replacing the housing and digitizer. All went smoothly until I missed an important step. There was a black tab that holds down the flex cable that connects to the digitizer. I forgot that step and my flex cable ripped.I have ordered another as a replacement. I understand that this will cause the digitizer to not work, but I have more issues, and I want to know if they are due to the missing cable.(the ripped flex cable.) I assembled the phone and the screen functions normally. As to be expected, I can't interact with the screen. However, Now my search button and settings buttons aren't functioning. My home and back buttons are working although. Also, My phone will not charge anymore. Is this due to the missing flex cable? I hope I didn't accidentally screw anything up. I was really careful, so I don't know why they won't function. I really hope that these issues are due to the missing cable. :silly:
Sorry, I am not allowed to post links.It has the camera and earpiece on it and is attached to the slider. :"(
How. Could u miss a step itsm really easy to take apart and put together its the flex cable garunteed
Sent from my Sony Tablet S using xda app-developers app
Tutorials
Most of the tutorials seem to be only of disassembly. Little to none are of reassembly. I wrote down a list and reversed the order, but as it got closer to assembly, I started to assemble it myself. Big mistake. I assumed the black tab was only there to hide the chips.
Charge Recognition
It actually can charge, but only when the phone is powered of. This must be due to the missing components. Maybe because some parts of the phone aren't connected, the phone will not recognize the charger when powered on. What a relief...:angel:
Just watch dissassembly in reverse
Sent from my Sony Tablet S using xda app-developers app
I got the replacement part. I even replaced the slider. I transferred the button cable to the new slider along with the main flex cable and the camera/earpiece flex cable. I am confused. I am inserting the flex cable into the digitizer slot, but it isn't working. I assumed there was a lock mechanism of some sort, but still no luck. I am not sure why it isn't going all the way in. Reversing the steps just isn't working. Placing the flex cable in is way harder than taking it out. Is there a certain way to place this cable in. What I am in need of is a picture of how a functioning digitizer's attachments look. Are you supposed to be able to see the golden tip of the flex cable?(Again, I am speaking of the flex cable with the black tab covering it. It is very small.)
:crying:
Lock.
There were locks for just aboul all the ZIF Connectors. Sony Ericsson's manual is the best!:good:
I tried again using the locks on the slots but it still wont work. Even with the manual, no luck... Now, it is charging normally, even while on. This indicates that something has changed. I wonder why the digitizer isn't working though. Maybe I should see what happens If I revert back to my old digitizer...
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Jaehyeok Koo said:
When I disassembled my xperia play for the first time,
the screen digitizer was damaged by my mistake.
I can't sure that, but I guess it can be.
At that time,
the bottom of screen (about 1/3?) didn't work.
So I bought the screen digitizer,
and replace it today.
But the problem hasn't been solved all the way.
If separate into 6 parts the screen from top.
(For example the top part is 1st part.
And beneath 1st part is 2nd part.)
5th parts doesn't work.
But the bottom 6th part works well.
I don't want to buy else new screen digitizer.
Please let me know how to use my xperia play with any problems.
Please help me.
Thanks about reading my thread.
Click to expand...
Click to collapse
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Bakisha said:
Are you sure it's digitizer problem? Maybe it's flex
I had similiar problem, but in my case whole touchscreen didn't work and it happened randomly on reboot
It turns out that when i was repairing my usb port i somehow didn't place flex cable properly and it was bended over that metal part of slider.
Once i reopen it (only the part with motherboard on it) and place flex cable properly, touchscreen started to work normaly
How old is your Play? When you opened it, does flex cable looks damaged?
Click to expand...
Click to collapse
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
RoboticBuddy said:
Where did you buy your digitizer? If it was from eBay, you could ask for a replacement from the seller you bought it from.
Like Bakisha, it could be the flex cable. If you know the digitizer is working, it usually is the flex cable.
Click to expand...
Click to collapse
If I ask for sending normal item without any problem again, should I send to seller the screen digitizer ?
Jaehyeok Koo said:
In fact, the flex cable of my xperia play looks a bit little.
The black color had been painted on cable wear a little.
So do you recommend me to replace flex cable?
Click to expand...
Click to collapse
Well, you could open your Play and see if flex cable properly placed. Open slider and put that white plastic inside metal frame. Put back dpad part of phone back, but keep an eye on that white plastic, it have two holes in motherboard to go into, then screw those two screws on motherboard (so it will make flex cable plug in motherboard - look if jack is now properly inserted
Close it and try it.
If you again have problems with touchscreen, then you have two options. Replace flex or replace digitizer. It's hard to say wich is faulty...
Sent from my R800i using xda app-developers app
I have an old Xperia S (LT26i) with me and i accidentally dropped it from the 2nd floor. Fortunately, it did not break into many pieces but it did bok the screen on the top left corner and also broke the plastic housing that where the on/off buttom cap is attached. it also caused some damage on the power switch which cause to not work anymore. the accelerometer and the gyro no longer works after that..
I was able to get my hands on another defective LT26i which the old user somewhat broke the board for a cheap price of $20 and instead of buying a new screen/a new Power Button Flex Cable Ribbon and a new case which will cause me around $90 in total (including shipping), is it possible if I just dismantle the the one with the defective board and use its Power Button Flex Cable Ribbon/Housing/Digitizer and put it into mine? will it still work after that?
Ive been looking into some information and i think it would work but i wanted to be sure by asking you pros
and will i be able to fix the accelerometer and gyro as well because it seems like i cannot find the location of the acc/gyro on the device.
Im looking at this for reference: sonymania.cz/storage/1331332888_sb_xperia_s_wi.pdf
Any information would really help.. Thanks in advance