Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Hey,
If you find it let me know, I need one two. Actually these are two cables the Coaxial (Display) and Coaxial (Functional). My screen goes white in landscape mode and I confirmed it's the cable by disassembling my machine. However was unable to find that cable Will let you know if I find it.
Me too.
I am getting odd touch screen errors and think it can only be the cable.
If anyone knows of a supplier, please post here.
Has anyone tried contacting HTC directly?
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Thanks,
Please do let me know, I really need that cable.
MOBILER
Finally ... got cables !
Here mate ... take this adress
http://qinyieproduct.diytrade.com/sdp/444314/4/pd-2468984/2411741-0.html
villard said:
Hello
I am new on this forum, sorry if this type of question has alreday been answered.
I've got a UNIVERSAL/ SPV M500 and the Coaxial Cable (linking the screen and the keyboard) has been twisted and is damaged.
Where can I find/buy a spare part to replace it ? the reference number is 73H00233-01M (Coaxial Cable Pre-assembly) as indicated in the service manual.
Thank for your help.
Click to expand...
Click to collapse
found coaxial cable for £60 plus vat.
villard said:
I've tried HTC europe , they forwarded me to the local repair centre. this one do not sell spare parts without repairing the item.
I'm trying to contact various shops . I'll let you know if it is successful
Click to expand...
Click to collapse
Give this site a look, http://www.apexlaptops.co.uk/Universal.htm
I have been having the same problems as you guys. my uni have been getting "white screen of death" for about 6 months now.
I am going to take out the cable and try and fix it myself. (fingers crossed)
I will let you all know how it goes. I felt £60 plus vat and postage was a bit steep.
coax cable
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Hi,
Congratulations!
What tools did you use for this job(srews, tweezers)?
gingerchristopher said:
Fixed it!!
I took apart my uni down to the last screw, and rebuilt it.
In the process I did find that i am missing an antenna in the back, it should have 3 but only has 2. oh well it works.
The 3rd antenna is for 3g and i am not on 3.
Anyway back to my uni.
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
If this works for longer than a month then i will solder the cable down.
Touch wood it seems to be working. I will try and get some photos done tonight
gingerchristopher.
Click to expand...
Click to collapse
re: fixed it
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
ang how about antistatic gloves?
gingerchristopher said:
Yes just a torex screwdriver size 6 to take out the 4 security screws in the battery tray, watch makers screwdrivers and a pair of fine point tweezers.
still having problems with my camera so photos will follow when i take it apart to solder.
Click to expand...
Click to collapse
Anti Static gloves!!
Because of the Job I do, I have an earthing band to connect the phone and me to the wall, and put the phone on an anti static table cover. All is good so far. I am looking at Feb to solder (as i have some leave in). There will be detailed photos and description.
Untill then........
Just found a coax on e-bay
Hi I hope anyone who is after this coax cable can read this before the weekend is out, as there is one on e-bay for £40 this is the link.
http://cgi.ebay.co.uk/NEW-O2-XDA-EX...9QQihZ020QQcategoryZ41343QQrdZ1QQcmdZViewItem
Chris.
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
hbahaie said:
Good done man go ahaed, and plz try to post the photos.
Another question, my universal some times lost its external speaker sound, so i cannot hear the rings, when i press on the back of the device, exactly on the battery cover in the middle between the two dummy holes and the usb port, it works again. Do u think that this is due to the coaxial damage also, even i don'y have any problem in the screen??
Click to expand...
Click to collapse
nope. open up and check the contacts
omega_ said:
nope. open up and check the contacts
Click to expand...
Click to collapse
Thank you very much for your advice, I'll check. Thanks
hbahaie said:
Thank you very much for your advice, I'll check. Thanks
Click to expand...
Click to collapse
I have disassembled my uni and checked for all connections, but there was no improvement. I can confirm that the disappearance of external speakers sound is not due to co-axial cable. The proof is that i extracted my main borad from my uni and implanted it in another one, i assumed that the problem will be rsolved, but the same problem still exists. Ok, now i can disassemble my uni for smallest piece, but any one advise me where is th connection part or the piece that causes that problem. Again a brief description of the problem:
when there is a coming call, i cannot here the ring or it is sevrely intermitent, also when i play any WMP file, i cannot here the sound, if I press firmly on the base or around the keyboard the sound comes again and may last for a few minutes or disappear after another press. So, there is a lose part in the main board i think that needs fixation, but which one????
Hi all
Now it takes me more than a month to upgrade my JASJAR due to a lot of problems I faced during this upgrading adventure… anyway, the last problem I still have is that after upgrading the screen goes crazy, I mean if you press on the screen the colours are mixed for few seconds and then its ok but at any time I touch the screen again the same happened so you can imagine what if I am going to dial a number or write a message …. So can anyone advice me what to do? …
The rom version is 1.13.82
Radio 1.04.02
Extrom 1.13.188
And I think the bootloader 1.00 and I don’t know why I feel that the bootloader is the reason ... I made a deep search but I couldn’t find problem like mine
gingerchristopher said:
The coax conectors where a little lose, so after a good clean in a solven cleaner and popped back in to the conector holder, after playing for 20 mins I found that they poped back out verry slightly, just enough to make the screen go white and not function.
So the solution is to make sure it does'nt come back out.
ok.
well I have as a tempery solution put a tiny bit of foam on top of the connecter and held it in place with a bit of tape.
Click to expand...
Click to collapse
Sitting next to my M5000 and all of a sudden the screen turned on but was white!
Following your lead I found that the first i.e. 'underneath' connector was not fully home. A little push and all is well.
Took the time to pack out the housing for the stylus to stop the little blighter escaping whilst in there.
Thank you for taking the time to post gingerchristopher.
Pete
Hi, i bought my universal (mda pro) on allegro (e-bay like polish portal). First time when i switched it on, screen was mirrored. I serched google for any rom to replace the original(now it is some qtek). It was useless. After next few hours on google i found pictures of dissasembling universal. I had opened screen and moved cables. When i switched it on it was ok... but only for 1 day. Right now moving cables does do nothing.
Question is: is there any reg hack to put screen to original, or i have to replace that bunch of cable from mainboard to screen or mayby it it bad soldering?
If any one has experience like that, plz help.
It was nescesery do replace lcd flex cable. I bought it from ebay from hongkong for 30$(with chineese post service) it came to me within 2 days. I replaced it myself. Now it is OK. If U know how to use screwdriver, i reccomend to do it yourself.
Hey There,
I am attempting to try and fix my phone because it has multiple problems associated with it such as a nonfunctional power button, a faulty in-call speaker, and blind spots within the digitizer that are unresponsive.
My guess is that the prior owner dropped the phone and some damage was sustained to the flex cable/pcb which runs to all of these things causing the phone to have some broken connections here and there.
I plan to use a teardown/repair guide to use this, BUT!
Does anyone know what else might be the problem, and where can I find a replace flex cable/pcb and how much do they usually go for?
I live in Canada...
Appreciate it.
You can get them off ebay for ~50 USD. ebay item number 260744426322. It's from China and will take forever but that's about it. Sounds like a flex cable though, hopefully it doesn't need a new digitizer too.
I have an old Xperia S (LT26i) with me and i accidentally dropped it from the 2nd floor. Fortunately, it did not break into many pieces but it did bok the screen on the top left corner and also broke the plastic housing that where the on/off buttom cap is attached. it also caused some damage on the power switch which cause to not work anymore. the accelerometer and the gyro no longer works after that..
I was able to get my hands on another defective LT26i which the old user somewhat broke the board for a cheap price of $20 and instead of buying a new screen/a new Power Button Flex Cable Ribbon and a new case which will cause me around $90 in total (including shipping), is it possible if I just dismantle the the one with the defective board and use its Power Button Flex Cable Ribbon/Housing/Digitizer and put it into mine? will it still work after that?
Ive been looking into some information and i think it would work but i wanted to be sure by asking you pros
and will i be able to fix the accelerometer and gyro as well because it seems like i cannot find the location of the acc/gyro on the device.
Im looking at this for reference: sonymania.cz/storage/1331332888_sb_xperia_s_wi.pdf
Any information would really help.. Thanks in advance
Hi everyone, I bought this ZenFone2 4gb 64g, recently it got soaked in my pocket due to rain and now has a few problems such as vibrating motor not working, microphone and speakers not working and screen timeout not working as well.
the problem is that due to job I relocated to Pakistan and here there is no one with replacement parts for this phone neither do they have experience of it. I have located parts on aliexpress.com but I am reluctant to open it up myself.
ASUS says Thayer its warranty was only 6 months so I am left with no options. Help me guys if you know something which can be done.
Thanks
Its easy to open. Need just the right tools. I think you may need to change docking port chip. Its about 6$ at aliexpress. Changed mine.. There are a lots of guides in web. Try one.
If you don't want to change it, just order it and go to some Asus repair center or any cellphone, smartphone repair center. And tell them you're problem firstly. Anyone with normal knowledge about a smartphone could do this.
Ofcourse if you do it yourself there can be problems, that i had : Broken antenna cable (I changed display- twice), broke the battery (i was a fool ).
Little Instruction: Take back cover off, take all the screws out, they are about 10, don't remeber really. Unplug SIM, SD flex cable, that is on the docking port chip.
Remove Antenna, very carefully. And replace it.
Zenfone 2 disassembly video:
http://www.youtube.com/watch?v=qMIivqu6XJY