i tried to flash a new rom on my device but my screen got stuck on htc logo. so i restored from the backup i created before flashing rom and after restoring and rebooting my screen is still still stuck on the htc logo.
Soo ur backup is stock rom or other rom?
Flash stock or titanium kiss kernel if stock rom
Shent with shexy kitteh ushin Sensation XE and One V
danishaznita said:
Soo ur backup is stock rom or other rom?
Flash stock or titanium kiss kernel if stock rom
Shent with shexy kitteh ushin Sensation XE and One V
Click to expand...
Click to collapse
my backup is stock rom. i flashed it with titanium kiss kernel and it worked.
THANKS
Yea flash titanium kiss and u good
One note : flash the right kernel for the rom u want to use
Shent with shexy kitteh ushin Sensation XE and One V
Related
i downloaded this
http://forum.xda-developers.com/showthread.php?t=1332500
put it in my sd card ..and rebooted in recovery...
installed that zip via recovery...go back...
then choose reboot system.....and i stucked on htc logo.....tried everything...factory reset etc.......nothing happens.....
plz hepl me guys...
one more thing clockworkmod recovery is working fine...
So did you take a backup before you flashed.
If so just restore it.
Scott
Try flashing a new rom
HTC WILDFIRE S
ROM:CM7 nightly
290 mb internal+1gb s2e
I say, just flash a new custom ROM. Most of them use Alquez's kernel, or a modded version of it anyhow.
My phone stuck on boot logo when I tried to update the kerenel from faux4b1 to faux4b3.. ( then I was using VIPERX rom ), I really got annoyed then I tried fastboot erase cache a couple of times and also flashing .img and also the modules.. none of it worked.. then I installed ARHD 6.0.0 it booted properly, ( stupid me wasn't aware of what would happen next ) out of greediness downloaded RoMeOs 1.6.0 installed the same problem, then downloaded 7.1.0 ARHD the same problem.. This time with ARHD 7.1.0 I changed the kernel to 3b11 no use I tried to restore my original backup ( Official HTC ) nothing helped.. And the ugliest thing I did was deleting ARHD 6.0.0 while copying ARHD 7.1.0 POOR ME!! MAY GOD = XDA HELP ME
harsharockzzz said:
My phone stuck on boot logo when I tried to update the kerenel from faux4b1 to faux4b3.. ( then I was using VIPERX rom ), I really got annoyed then I tried fastboot erase cache a couple of times and also flashing .img and also the modules.. none of it worked.. then I installed ARHD 6.0.0 it booted properly, ( stupid me wasn't aware of what would happen next ) out of greediness downloaded RoMeOs 1.6.0 installed the same problem, then downloaded 7.1.0 ARHD the same problem.. This time with ARHD 7.1.0 I changed the kernel to 3b11 no use I tried to restore my original backup ( Official HTC ) nothing helped.. And the ugliest thing I did was deleting ARHD 6.0.0 while copying ARHD 7.1.0 POOR ME!! MAY GOD = XDA HELP ME
Click to expand...
Click to collapse
And you never bothered to flash the stock kernel for your HTC Android back up, well that's dumb.
flash your HTC backup
Boot into recovery flash stock kernel
Fast boot erase cache
First boot and set up again
Then try your rom with their stock provided boot.img
Sent from my HTC One X using xda app-developers app
hutzdani said:
And you never bothered to flash the stock kernel for your HTC Android back up, well that's dumb.
flash your HTC backup
Boot into recovery flash stock kernel
Fast boot erase cache
First boot and set up again
Then try your rom with their stock provided boot.img
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Hey thanks for the reply.. First I should restore my backed up HTC ROM right ? Then again in fastboot I should flash the stock kernel ? If this is what you mean then where can I find stock kernel :O
I'm thinking you'd want to re-match your rom and kernel.
Try reflashing your recovery.
Typed with XDA Premium on OneX
I don't know but I pushed the arhd 6.0.0 through and.. now it works fine and I flashed faux 4b3 but it shows 2b1 lol
Sent from my HTC One X using xda app-developers app
just don't play with kernals right now, all are same and stock is your best option, so install arhd 7 and format and clean everything.
Team,
I am owning a HOX, and i am very pleased with this piece of equipment, so i have decided to try couple of roms, each time i want to change a rom i make a back up copy in case i want to come back.
My clockmod recovery contain:
The sock rom, ViperX 2.1.0, tripndroid cyanogene CM10.
the last rom was tripndroid i like it a lot but i hate the temperature of the phone more than normal, so i switched back to my previous rom(viperX).
Before installing the rom (tripndroid) the clockomod back ups were working i have tried them, but after that it stopped working even the stock rom.
I stuck in the rebooting screen or in the starting menu with capacitor buttons on and everything frozen.
Any suggestion will be appreciated.
Regards
Did you flash boot.img everytime you restored a backup?
Sent from my HTC One X using xda app-developers app
You have to reflash the boot.img of the rom you want to restore first, then restore. so wipe/factory reset>reboot and erase cache>flash original boot.img that came with the rom you are restoring> then finally restore backup.
i have do exactly what you have said but same thing bootloop in splash screen.
BTW: i am in viperx 2.1.0 but the backup was 2.0.0 ( i have upgrade on OTA) is this ok?
if your phone is S-On you have to flash the boot.img from bootloader with fastboot, dont forget to backup your sd when installing ruu/ota's/relocking/unlocking sometimes they rape your sd blank
Try reflashing ViperX 2.00 after the restore.
After installing a Rom or back up your phone can take some time to boot up just leave it for awial its not froze its just loading be patients
Sent from my HTC One X using xda premium
I did the Hboot update to 1.23 and firmware flashing etc so I could enjoy JellyBean with Sense 4.5. Now i'm on InsertCoin 10.4.5, and came from HTC One maXimus V4.1.
But I want to get back to an AOSP JB rom. I tried flashing several ROMs, like IceColdJelly, ParanoidAndroid, Jellybean 4.1.2 AOSP build. But i can't get them to work. Everytime a bootloop, or I get to Splashscreen from ROM but then halts.
Is there anyway I can get those ROMs to work? I didn't make an nandroid backup
Please tell me you've been flashing the boot.img from the roms? And that you've been fastboot erase caching?
Why does NOBODY listen to the constant
MAKE A NANROID BACK UP, MAKE 3,00000000 of them.
Please learn from this experience, life's easier.
Sent from my HTC One X
Aosp Roms don't work on the new hboot from what I can gather, either stick with insertcoin jb or switch back to a sense ics rom
sent from my One X using xda venom premium
Yes, i did flash the boot.img's and erase fastboot cache. Boot.img from AOSP-ROM didn't work at all. Boot.img from insertcoin and maximus brought me to ROM splashscreen. Only no back-up.
Sent from my HTC One X using xda premium
i have htc one x and my brother has a galaxy note 2
on the note 2 every week i try a different custom rom for him and its a piece of cake ..
on my htc one x , i unlocked it .. installed recovery , installed GB cm10 rom without backing up first
it went well .. now i want to switch back to a different custom rom such as clean rom 5.1
my bootloader says : unlocked , endeavoru pvt ship / S-on hboot 1.12
i booted to recovery wiped cache/partition/and system/dalvik cache
and installed the cleanrom zip from SD CARD
when the device boot its stuch on htc logo and going nowhere
i tried flashing boot.img and nothing work
when i wipe again and intall cm10 GB it always work
but nothing else than that
can anyone give me an advice Please i really need it , did i miss something ??
wrong forum
You will probably have more luck getting an answer over in the One X forum.
http://forum.xda-developers.com/forumdisplay.php?f=1533
U r definately downloading a wrong rom
Sent from my SAMSUNG-SGH-I747 using xda premium