I have an SGH-1747 on AT&T. I already had the OTA 4.3 update on my phone and I wanted to simply wipe all of the apps off so it was a fresh 4.3 install as it was running slow. I went into the settings and did a factory wipe thinking that would wipe it back to original 4.3 but when it rebooted it hung on the AT&T screen.
I went into Recovery mode and wiped everything to factory refresh from there hoping that would fix it and it made it worse. Now when I reboot i simply get the Firmware upgrade encountered an issue and it asks me to use Kies to go into recovery mode. I did that multiple times and it never worked. Simply kept failing.
I am able to get into Download Mode but I can't seem to find a ODIN version of the 4.3 that I can try to flash it back to. I would love to go back to a 4.2 version if that would work but I stopped before I made it worse. In download mode it says
ODIN MODE
PRODUCT NAME SGH-I747
CUSTOM BINARY DOWNLOAD: YES (2 COUNTS) - Early on with 4.1 i had flash up to 4.2 using ODIN but i have on official AT&T release since
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOM SECUREBOOT: ENABLE
WARRANTY BIT = 1
BOOTLOADER RP SWREV: 2
Any advice out there? I am thinking I soft bricked my phone but I am not sure?
PLEASE HELP!
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
audit13 said:
There is no stock 4.3 AT&T ROM that can be flashed via Odin. You cannot downgrade the bootloader to an older version.
You can try this: http://forum.xda-developers.com/showthread.php?t=2658486
Click to expand...
Click to collapse
Thanks for the info. I actually got it fixed by giving in and going to best buy and the Samsung guys actually were able to flash it to a fresh 4.3 image. They knew it had a non factory image on it in the past based on the counter but they still did it. I'm all fixed now which was awesome.
So I rooted my T211. After sometime, I wanted to update the software (maybe I'll get better stability and performance?) so I unrooted it. After successfully unrooted it using Kingo app, I can't update it saying "the device was modified. Software updates are not available." Btw my device is in stock rom and never flashed a custom rom. How do I fix this w/o flashing stock rom (download always corrupt, damn!) and w/o using Kies?
OMG !
I am a bit confused !
Tab 3 7.0 (SM-T210 Variants and SM-T211 Variants) don't have a Software update yet !
It only have the stock version the one it was release w/
If you want Android 4.2.2 or 4.3 or even KitKat then that's NOT going to happen right now.
No software update even if your device wasn't modified.
You can also use this great app from Chainfire ! to reset flash counter BUT there's NO guarantee it will work since any version of Tab 3 isn't listed !
Apart from this, the only way will be ODIN since KIES won't also update it if you're running already Android 4.1.2
Sent from Gallifrey using TARDIS
I am on a rooted stock ROM 4.1.2 (LDMF1) on an i747m.
Can someone point me to an upgrade procedure to KK?
desirus said:
I am on a rooted stock ROM 4.1.2 (LDMF1) on an i747m.
Can someone point me to an upgrade procedure to KK?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1725839 is full of ressources.
What exactly are you trying to do? Get the official update or flash a custom rom?
If you want the official, remove root and install the OTA (you can use towelroot afterward to root).
If you want a custom rom, follow the FULL instructions in the rom's OP that you choose.
BWolf56 said:
http://forum.xda-developers.com/showthread.php?t=1725839 is full of ressources.
What exactly are you trying to do? Get the official update or flash a custom rom?
If you want the official, remove root and install the OTA (you can use towelroot afterward to root).
If you want a custom rom, follow the FULL instructions in the rom's OP that you choose.
Click to expand...
Click to collapse
Thank you
I want to the official ROM for KK, which I can find.
OK so from what you said the first thin I do is unroot? I will research that.
I was wondering if I can go direct from 4.1.2 to 4.4.2?
I would use ODIN on my PC?
Do I have to do any sort of backing up ( I have Titanium pro) before hand, restore procedures?
desirus said:
Thank you
I want to the official ROM for KK, which I can find.
OK so from what you said the first thin I do is unroot? I will research that.
I was wondering if I can go direct from 4.1.2 to 4.4.2?
I would use ODIN on my PC?
Do I have to do any sort of backing up ( I have Titanium pro) before hand, restore procedures?
Click to expand...
Click to collapse
Tibu is my fav backup app, just make sure you don't restore system app/data. Just make a batch backup and restore once you've flashed KK.
Unroot can be done directly in SuperSU (app).
Yes you can go directly to KK (or any other version), just don't downgrade once you'll have the 4.3+ bootloader or you'll brick your device.
And yes, use Odin on your PC, mobile Odin doesn't flash bootloaders.
The entire process is fairly simple. Just gotta be patient
galaxy S3 AT&T: from stock 4.1.2 to 4.4.2
I am new to these forms, please help me with my questions.
I have a smartphone SGS III AT&T. It is unlocked and working perfect with:
ROM: 4.1.2 Stock
Baseband: DMG2
Kernel: 3.0.31-1300972
Build Number: JZO54K.I747UCDMG2
I am not in USA, so my Smartphone is unlocked.
Initially I used the *#197328640# commands to unlock it
I want to apply enewman17 thread http://forum.xda-developers.com/showthread.php?t=2789917 to upgrade to 4.4.2
My questions are:
1. When the procedure is finished, the smartphone still unlocked?
2. If it became locked, is there a free procedure to release it again?
regards
franzrocamolina said:
I am new to these forms, please help me with my questions.
I have a smartphone SGS III AT&T. It is unlocked and working perfect with:
ROM: 4.1.2 Stock
Baseband: DMG2
Kernel: 3.0.31-1300972
Build Number: JZO54K.I747UCDMG2
I am not in USA, so my Smartphone is unlocked.
Initially I used the *#197328640# commands to unlock it
I want to apply enewman17 thread http://forum.xda-developers.com/showthread.php?t=2789917 to upgrade to 4.4.2
My questions are:
1. When the procedure is finished, the smartphone still unlocked?
2. If it became locked, is there a free procedure to release it again?
regards
Click to expand...
Click to collapse
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
AT&T I747 from 4.1.2 to 4.4.2 Perfect procedure
BWolf56 said:
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
Click to expand...
Click to collapse
BWolf56...you are right!!!
Ran all procedure http://forum.xda-developers.com/show....php?t=2789917.
My I747 AT&T is now in 4.4.2. No problems at all. Still Unlocked.
One point more:
When I was in 4.1.2 Stock, I was not able to use "USB Theter" because I am not with AT&T SIM Card. With this version I can USB Theter without restriction.
unrooted 4.1.1 won't update dead android
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I'm in the exact same boat. I was rooted with stock rom and recovery previously. No matter what I've done, it always fails.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Yellow triangle did not solve problem
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I spent several hours on this again today. I thought I had discerned the fix when I found a post showing the custom download count on the download screen and references to the yellow triangle program to reset it. I rerooted the phone, put stock recovery back, zeroed out the counter with yellow triangle, put the stock image back with ODIN, factory reset, and ended up with an unrooted phone with zero count. The download screen now says:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE (in light Grey)
I thought that would do it but the OTA still fails and I still see the red triangle on the stock recovery page. The only thing I can think of now is that SuperSU is still on the phone. It is disabled but still has 12KB of data that I don't know how to clear. I used the stock image from the skipsoft Android Toolkit.
Any ideas would be really appreciated.
I would steer clear of the toolkit. Follow enewman17's how to update thread in the General section. Seems to have a pretty good success rate.
get KK 4.4.2 in your AT&T SG3 without OTA
BWolf56 said:
Unlock is "permanent". You shouldn't lose root but everything you do is at your own risk.
Click to expand...
Click to collapse
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I did the same than you and also what n01un0 says but couldn't get OTA update to 4.3 or 4.4.2.
If you want the 4.4.2 in your S3, follow enewman17's http://forum.xda-developers.com/showthread.php?t=2789917 Thread.
It worked perfect for me from 4.1.2 stock to 4.4.2. The final result is the same that you get by OTA (if OTA works)
unrooted 4.1.1 won't update dead android - solved
hannahse said:
My AT&T SG3 was rooted until yesterday with stock 4.1.1. I unrooted, re flashed stock image and stock recovery. The phone status says "Normal" now so I think I successfully unrooted. When I try to do the OTA after downloading, it goes to a screen which says installing then updating with an incremental percent counter. When it reaches about 29%, it just reboots and comes back with "Install Interrupted The software update could not be installed". When I do "adb reboot recovery" from a command window, I see a dead android with a red triangle and I assume that has something to do with it or is some kind of symptom. Is there anything I can do to get the latest stock image installed? Did I miss something in the unroot process?
SGH-I747 4.1.1 1747UCDLK3
Click to expand...
Click to collapse
I solved my problem by a convoluted process that I could not recommend but will lay out as best I can in case anyone is that desperate. I had re-rooted and un-rooted a couple times since my last post and finally decided to try a different stock image. I found a link to one in an article
how-to-unroot-att-galaxy-s3-sgh-i747 (sorry - not allowed to post URL)
The link is to stockroms.net. Really slow download - it took a couple hours. After the download (and unzip),
I attached my unrooted phone via USB cable to my computer.
Installed it with ODIN and watched the phone reboot
It seem to get stuck on the Samsung splash screen.
I went into recovery mode and noticed that - at last - I did not have the red triangle and no dead android. I tried wiping the cache a couple times from the recovery screen but it still seemed to get stuck at the splash screen (not sure if I waited long enough).
I finally did the factory reset from the recovery and it finally came back to life and went through the whole initialization thing. I confirmed a couple times that the red triangle was gone and noted that I had gone from Android version 4.1.1 to 4.04. Maybe that was the key or maybe I had a bad stock version of 4.1.1. IDK. But I started going through a series of updates. I am currently at version 4.3 and downloading what I hope will be the last update.
Started with 4.1.1 and used outdated stock image to go back to
4.04 - small update but version still
4.04 - cleared data from AT&T Update App to get around the wait 24 hours - got the update installed to version
4.1.2 - checked for update and got upgraded to
4.3 - check for update wanted me to wait 24 hours and I could not see how to clear the data - so changed the phone's date to next day. Automatically started downloading a new update - I'm hoping its the last
Hi there, just registered to post this question regarding loading the Likewise 4.4.2 rom on tmobile galaxy s3. I cannot get it the rom to boot despite coming from android 4.3 and using TWRP. I have tried twice and both times the rom will not boot and I just get a black screen, forcing me to do another restore.
Does anyone have any advice? I will include a screenshot to show my current android version, which is what its supposed to be (4.3.) The only thing I've heard that causes problems with this rom is not being updated to 4.3, or not using TWRP. I don't know what is wrong here.
You need to update your firmware to 4.3. Your current rom has no bearing on this whatsoever.
DocHoliday77 said:
You need to update your fimware to 4.3. Your current rom has no bearing on this whatsoever.
Click to expand...
Click to collapse
Okay thanks. I feel like i may have done that already, back when i installed the unnofficial 4.3 software, but since the rom isnt booting maybe not.
On the xda page for the 4.3 firmware it says something about having to be stock/unmodified - is this true or can I flash the 4.3 firmware no matter what ROM I'm using.
Ypu can flash the firmware with odin regardless. You only have to be stock unmodified yo use the ota.
thanks got it working
I will do whatever it takes to see if my data is still there. Then I need to get my warranty replacement.
I have a completely stock Note II (AT&T SGH-i317) that I believe is at 4.3 Jelly Bean I317UCUBMK6 (or ***MJ4, I don't know the difference). OTA firmware updates have never worked for my phone since I took it out of the box. Samsung/AT&T have no download link to an official 4.3 that I could use with ODIN to reflash[?] my phone.
I have had connector and battery issues for a while and suddenly last week my phone just hung at the AT&T carrier screen when I turned it on. I tried recovery mode>clear the cache and rebooting to no avail. In recovery it had told me it was unable to mount the EFS. I also saw online that there were, in fact, old leaked roms (4.3) from before 4.3 was released. Can I "flash"[?] to one of these from 4.3 not-leaked official? Again, not trying to lose any data...
I also saw this thread and didn't know if it would help:
http://forum.xda-developers.com/showthread.php?t=2589891
Thanks and I will seriously buy you a beer or other preferred beverage/donation if you can help.
Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there
terpin32 said:
Were you rooted when this happened or want to be rooted cuz if you download a stock att rom and flash though odin it should keep everything you have on there
Click to expand...
Click to collapse
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!
talonreaper said:
That's the thing though--I attempted to use ODIN with the stock 4.1.2 ROM and it failed. Then I remembered I had 4.3 installed. I can't find a stock AT&T ROM for 4.3 anywhere!
Click to expand...
Click to collapse
That's y the 4.1.2 wont boot download this and flash this via odin
http://d-h.st/DGZ