[Q] Galaxy SIII screen not turning on after glass replacement - T-Mobile, Samsung Galaxy SIII

I have replaced cracked Galaxy SIII glass at home with new gorilla glass, bought from all4cellular store . I have replaced the glass using the toolkit which i bought with this and hair dryer.
In this process, i happend to tear the 'return key' cable near home button(right button cable inside the glass), so i have not affixed the new glass with the existing adhesive tightly.
Now what i have is my S3 screen does not turn on even my could hear some sound and feel vibrations.
Is this ('tearing of return key' cable near home button) cause of my phone screen not turning on.
I will post images of my phone.
Can any one help me with my situation, any suggestion or comments?
Let me know if you can not understand the situation.

Sounds like you did more the damage the glass and back button. Take it apart again and make sure everything is connected correctly. It sounds like your going to have to buy a replacement (glass and digitizer as one or just try to buy the digitizer alone) which will not be cheap compared to what I've seen used S3's sell for lately, you might as well buy a used S3 if the display on yours is damaged.
Sent from my SGH-T999 using xda premium

its still in warranty-can this help me
Thank you for very quick reply to my post.
its still in Samsung warranty, can this help me to fix this, by sending them this phone and explain them what i have done.
thanks,
Rajesh.

Samsung might say no, because you have tampered with the device (taking it apart and replacing the glass). You can try though, they might not even notice the phone has been taken apart.
Sent from my SGH-T999 using xda premium

Related

In the search for t989 parts

I am working on replacing a samsung tmobile lcd screen. I bought a screen off ebay. As i got everything broke down i noticed the adhesive around the edge of the screen. Where can i find this die cut adhesive. I also need it for the flex cable light buttons at the bottom. As I removed the old screen I did not heat it hot enough. the buttons seperated and I do not want to waste a $180 lcd with bad buttons and no adhesive.
I wanna sell my phone you want that
Sent from my SGH-T989 using xda premium
What are you selling? Email me direct as I do not think this is where to post that. [email protected](dot)com

[Q] Screen replacement

Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!
wangasore said:
Hello All,
Just recently dropped my screen for AT&T Samsung Galaxy Note 2. The phone still works but has cracks everyone. I was wondering if anyone has attempted to change just the screen itself, if so, where did you buy the screen from and what tools did you use? Also, what is the metal frame around the phone called and is it possible to get it replaced? Thank you and have a nice day!
Click to expand...
Click to collapse
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
How hard was it to do a replacement on the screen glass itself? and is it easy to do a bezel replacement?
Nate8315 said:
If you are talking about the glass then I just replaced mine about a week ago. I actually ordered a replacement in white instead of the grey that I have. I used a hair dryer, hobby knife kit (only to start the edges), and the tools that came with the glass. It cost about $30 and an hour of your time. The only problem I had was getting the glass to stick with the old tape. A good reference are the videos for replacing the Galaxy S3 glass.
Do not push to hard when putting the new screen in place, you will break the digitizer if you do. I did find that if you have a completely broken screen and its showing black, the s-pen seems to still work fine and can make the phone function. I am assuming that the 11pin port will also push video to a tv with the screen broken and the phone can be used that way also if needed (will test and let you know).
Click to expand...
Click to collapse
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!
wangasore said:
You replaced the glass for the Note 2? Yes I am just talking about the glass itself. Do you have a link to where you bought the item and any link to videos you used to assist you in replacing the glass? Thank you so much for all your help!
Click to expand...
Click to collapse
I purchased the glass off of ebay, I cant post a link due to not having enough post here, but just search "galaxy note 2 replacement glass"
I looked at a bunch of Galaxy S3 glass replacement videos. just search "s3 glass replacement" on youtube.
It is time consuming, I used a hair dryer to be safe because heat guns get too hot if not careful.
I did get a chance to test if the 11pin still pushed video to a tv with a broken screen (using an MHL adapter). It did not for me. I plugged a phone in with a broken digitizer that the s pen still worked on and would let me make calls from. The phone is still function able, just no picture on the screen (working in the dark with the s-pen). Nothing showed up on the tv screen. I plugged another note 2 in to verify and the other note 2 pushed video just fine.
What's the easiest way to tell if I just need to replace the glass versus the entire digitizer?
Glass replacement
Ok for every thread on the internet the digitizer is NOT part of the glass. The glass is just that......glass. Stop calling it a digitizer these are not iPhones!!!!!! The digitizer is laid on top of the amoled and has a connector that runs under the display and plugs in there with a flip type switch connector. The glass can be removed with heat approx. 160 deg with a heat gun on low and keeping track of the temp with a infrared thermo. I've done this a few times now be careful with white as these tend to break easier than the grey not sure why laminate must be weaker. Takes 45mins to do. You can buy the glass for approx. $25 shipped be careful near the bottom with the button flex they are glued on. You must reuse your speaker trim and button trim also. I have only 1 single question can you buy a replacement digitizer by itself without having to buy the amoled? Anyone know and how much they are please point me to one for the i317m.
Why the are you answering a 3 month old thread?
Op says he dropped his screen...lol
Sent from my SAMSUNG-SGH-I317 using xda premium
Better late than never. ...imho...lol

previosly cracked screen, dropped again, now screen is black - what broke?

i think i'm screwed. so i previosly dropped it and it got a few cracks in the top right corner only one of which dipped down onto my viewing area. functionality was not affected. really as good as you can hope for as far as cracked screens go.
dropped it again and didnt hurt the glass any more, but the screen is now black. phone is on, buttons light up, i can even USE THE SCREEN, i just cant SEE anything. i can answer calls by knowing where to swype my finger and end them by pressing where the end button is. for a brief moment the very very bottom edge had a thin stip of green-pixely-ur-fcked-dude at the bottom.
So my question is what broke??? I dont really think the previous cracks are relevant but just in case...
Things i have done: restarted the phone by holding power button. removed/reinstalled battery, unplugged/replugged screen inside phone, whapped phone a few times, squeezed phone gently in various areas, searched forums until bleary eyed, browsed internet for phone cases, browsed internet for pictures of cats, posted this thread.
the extent of my knowledge is that the screen is composed of glass on top of the digitizer on top of the AMOLED (aka the LCD?). and before i realized i could still use the screen i was praying i was super lucky and maybe the screen came unplugged. but not so.
any advice? i previously saw that replacement glass is cheap but read that the whole setup is expensive. i do not have insurance on the phone. i do intend to fix it myself.
Most likely the screen needs to be replaced now. Theres a how to on this. Ebay sells replacements.
Sent from my Galaxy S3 using neighbors wifi
You need a flip phone.
Definitely your LCD broke. You can buy both LCD and digitizer on eBay for about a hundred bucks I think. Its not hard to do it yourself.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
For future reference did you at least have a case on it when it dropped?
Sent from my SGH-T999 using xda app-developers app
No I didn't have a case on it. probly wouldnt have saved my glass given the way it landed on gravel (8 inches off the ground btw). Mighta reduced the shock that caused this problem tho.
Well I woulndnt have guessed that LCDs usually break this way. I woulda figured if I cracked the LCD or something (under the glass) that I
would just end up with a mess of colors or something. I wonder what went wrong...
So my new digitizer and LCD will come together? will I have to buy new glass seperate?
Is it possible to pilfer to digitizer/LCD from a used phone with cracked glass? Probly not huh, cuz the videos seem to show them getting destroyed upon removal.
Thanks for the info guys.
Is there any physical damage to the phone you can see? If not, pm me as I may have an idea.
pytyper483 said:
If not, pm me as I may have an idea.
Click to expand...
Click to collapse
feel free to reply here

[Q] S3 screen/led replacement issue

I recently bought a galaxy s3 off ebay that just needed a glass screen repair. Having done several of these with other models I thought no biggie ill ju st change out the digitizer and have a heck of a deal lol until I started looking into how the phone was made and the screens being fused together like they are. I followed a youtube video and heated the screen with a hairdryer and proceeded to try and carefully tried to remove the outer glass without harming the digitizer or lcd screens fused behind it. Unfortunately when I removed the glass screen the digitizer came with it. I thought id ripped the digitizer's flex cable til I read this phones digitizer doesnt connect that way. It didnt crack the lcd screen in any way tho, so Im pretty sure I can just clean the lcd rly well and make sure all the adhesive and glass is cleaned off and use new 3m adhesive to install a new digitizer then the glass screen over it.
The only thing im questionable about is a thin brown ribbon/wire that was pulled out of its original place iand tore a little while doimg this removal. Some of the adhesive from the factory apparently stuck to it while I was heating the glass and attatched itself to the digitizer somewhat or enough to work its way out and initially tear as I was pulling the glass off. Its not the buttons or the small cable that attatches them but it is right beside them. Can anyone with some experience working on these galaxy 3s please tell me what this hooks up, controls, or what other replacement part I would have to buy that would have this ribbon included in it? Or with this ribbon being the way it is, am I going to have to buy the lcd,digitizer, &glass screen replacement that comes preassembled? I know its not the lcd flex cable amd doesnt go to the digitizer so im at a loss.
Im attatching pics so u will know what im referring to. Thanks for any help its greatly appreciated.
Pics after screen removal.
That's why I paid more and got the LCD+Digitizer. Cost more but made it a million times faster.
Sent from my Freeza MD4 Stock Rooted Galaxy S3
Yeah i understand i was just tryin to save a few. I can still do that and not lose but 10 bucks so notjhing hurt if i cant find a solution to this or just make double certain that ribbon being the way it is in the pic isnt going to hurt anything.
rbroyles528 said:
I recently bought a galaxy s3 off ebay that just needed a glass screen repair. Having done several of these with other models I thought no biggie ill ju st change out the digitizer and have a heck of a deal lol until I started looking into how the phone was made and the screens being fused together like they are. I followed a youtube video and heated the screen with a hairdryer and proceeded to try and carefully tried to remove the outer glass without harming the digitizer or lcd screens fused behind it. Unfortunately when I removed the glass screen the digitizer came with it. I thought id ripped the digitizer's flex cable til I read this phones digitizer doesnt connect that way. It didnt crack the lcd screen in any way tho, so Im pretty sure I can just clean the lcd rly well and make sure all the adhesive and glass is cleaned off and use new 3m adhesive to install a new digitizer then the glass screen over it.
The only thing im questionable about is a thin brown ribbon/wire that was pulled out of its original place iand tore a little while doimg this removal. Some of the adhesive from the factory apparently stuck to it while I was heating the glass and attatched itself to the digitizer somewhat or enough to work its way out and initially tear as I was pulling the glass off. Its not the buttons or the small cable that attatches them but it is right beside them. Can anyone with some experience working on these galaxy 3s please tell me what this hooks up, controls, or what other replacement part I would have to buy that would have this ribbon included in it? Or with this ribbon being the way it is, am I going to have to buy the lcd,digitizer, &glass screen replacement that comes preassembled? I know its not the lcd flex cable amd doesnt go to the digitizer so im at a loss.
Im attatching pics so u will know what im referring to. Thanks for any help its greatly appreciated.
Click to expand...
Click to collapse
I'd go check out this thread and ask some of these guys. A lot of them seem to have attempted repairs already, and many of them have had to troubleshoot different issues. http://forum.xda-developers.com/showthread.php?t=1890708&page=78

Screen replacement

Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Hey I just recently broke my screen and I bought my phone last july. Its not completely broken but its shattered most of the screen and its incredibly annoying. Is there anyway I could get a new phone or get a cheap screen replacement within 30-50$ range? Or should I just go ahead and get a new phone?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
BWolf56 said:
If the digitalizer isn't damaged, replacing the glass only is cheap and easy. Look it up :good:
Click to expand...
Click to collapse
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
How would I tell if the digitilizer is broken? It may look just like the glass is broken. If I didn't have my screen protector on I'm pretty sure it would fall apart
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
If the screen usable? Any color/light bleed? Or color distortion/fading?
BWolf56 said:
If the screen usable? Any color/light bleed? Or color distortion/fading?
Click to expand...
Click to collapse
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Tyler.Boston1 said:
Oh ok well then its still working
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Check out this thread for replacing your screen
http://forum.xda-developers.com/showthread.php?t=1945494
I highly recommend against trying to replace just the glass. That is what I tried to do, but the LCD is glued to the digitizer which is glued to the glass. I didn't use enough heat and though I got through the edge tape holding the glass to the frame, I shattered the digitizer and LCD as well as busted through the menu buttons.
If you think you can do it, go for it. Not real tool intensive, but there will be lots of heat and the success rate is probably 50/50.
The next step from that is to replace the whole LCD/DIGITIZER/GLASS. But that will set you back around $200. Same process, but you pretty much scrape the glass, digitizer and LCD from the metal frame. Lots of effort, lots of time, and little pieces of glass flying everywhere.
For about the same price, get the FRAME/LCD/DIGITIZER/GLASS asssembly. It only requires removing a few screws, unhooking a couple of cables, and replacing the hole front end. It can be done with care in about 15 minutes.
If you do that, be sure you get the right model number. If you are on AT&T in the US, you'll need the i747. The i9300 may come up a few bucks less, but it's not compatible. Color doesn't matter - you can change now, if you want.
The biggest disadvantage of removing the glass only is the risk of getting dust inbetween the LCD and the glass front. With the other two methods, the LCD/DIGITIZER/GLASS are already fused together. However, if you pull it off, no one will ever know you messed with it, and the warranty cheat won't be tampered with as it will be with a frame replacement.
According to the other post, you are still 13 months from an upgrade. That means around $450 to replace your S3 and $630 if you want to go the S4. For less than half that, you can get the frame replaced. I might even suggest that once you replace the frame, you spend that $10 to replace the glass and try it without any fear of consequences on the one you remove. If you do it well, you might could sell that assembly for $150-$200.
Good luck!
i9300 screen (no frame) will fit i747 frame
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
k2lc said:
can you advise if a i9300 screen (no frame) will fit i747 frame? Mine is 747, I can see lots of posts on Ebay for screens with both 9300 and 747 compatible. Want to make sure before order.
Click to expand...
Click to collapse
Lcd, digitizer, and glass are all identical except color. Once you see the word "frame", the model matters.
I just recently did this successfully. The key is a good source of heat and patience. I used a heat gun and it took me about thirty minutes to do. There are screens you can order that come with the little tools to use. Start heating it slowly and use the tools to take the glass off. Heat it until its relatively easy to get the glass off but do not over heat it! Keep going until all the glass is off. Once its off, apply some sticky tape (or you can use the tape that was already on the phone if you don't destroy it) and it will be good to go. Make sure that you take the protective paper off the glass you ordered.
Should you have any issues feel free to PM me.
Sent from my SAMSUNG-SGH-I747 using xda premium

Categories

Resources