Develop Bugs

SGP Ultra thin Air

Just ordered this gorgeous case for my One X..its by Spigen only n looks amazing..will post pics n review on receiving it..
http://www.spigen.com/cell-phone/htc/one-x/htc-one-x-ultra-thin-air-series.html
Sent from my Stunning White HTC One X

Looks good, do you know whether it will protect the camera?
Sent from my HTC One X using XDA

Hey guys.
The most concerning thing for me was protecting the camera lens. After looking around I purchased this one in blue from Ebay for under 8 quid and it's feels, looks and fits the phone perfect and fits around the camera lens snuggly and protrudes approx 1 ml above the lens allowing us to lay it down on front or back without the phone touching the surface at any time. Highly recommended, I have included a link for u to see the case for urself.
http://forum.xda-developers.com/showthread.php?t=1604911
Sent from my HTC One X using xda premium

dannysmith43 said:
Looks good, do you know whether it will protect the camera?
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Yes it does...it forms a lip around the camera..so no worries
Sent from my Stunning White HTC One X

Thanks, brought one from UK eBay site for £17 (free delivery), also included an Oleophoblic screen cover.

Bigmille said:
Thanks, brought one from UK eBay site for £17 (free delivery), also included an Oleophoblic screen cover.
Click to expand...
Click to collapse
Please post some pics n review when u receive it coz mine is gonna take more than a week as it has to be delivered to me in India all the way from US..thanks..
Sent from my Stunning White HTC One X

Looks nice, looking forward to some pics!

Thanks LakshayX.
I checked out your link and decided to order the SGP Ultra thin Air in soul black from Amazon UK for £19. It arrived this morning and I have to say it's a great case and fits superbly, looks good and despite not being the cheapest case available it's certainly worth the money.

rider5512 said:
Thanks LakshayX.
I checked out your link and decided to order the SGP Ultra thin Air in soul black from Amazon UK for £19. It arrived this morning and I have to say it's a great case and fits superbly, looks good and despite not being the cheapest case available it's certainly worth the money.
Click to expand...
Click to collapse
Ya I have been using SGP cases for some time now and as far as I have tried these are one of the best cases out there..that's y I am a SGP fan..can u please post some pics...m really eager to see some real life pics...thanks..
Sent from my Stunning White HTC One X

Can someone plz post pics？
Sent from my HTC One X using Tapatalk 2

I received my Ultra Thin Air case this morning, took some quick pictures before went to work.
After using it for a day, here are my impressions:
The good points:
The case feels similar to the back of Galaxy S III, with the non-slippery coating/plastic. But it is less glossy so it does not attract grassy finger prints as much as the S III.
The case feels very good in the hand, it is extremely light, and you almost fell no weight difference with the case on.
It looks great, fitting is almost perfect, the only minor issue I can find is some of the speak grills don’t link up perfectly with the grill cut outs on the case. This is a minor cosmetic issue and the only fault I can find.
The case does protect all the corners of the phone, and will not come off that easy consider it does not wrap around the phone on all sides.
The Not so good points:
This case will not protect the screen when you lay it face down, as it doesn’t have raised lips around the sides.
The case does protect the camera lenses as it protrude very slight around the lenses (maybe 0.5mm), But it is too shallow for my liking, so I’ll be using a cut out from a screen protector to cover it.
The included screen protector is too narrow for my liking. The side cut out is the same width as the screen.
The conclusion:
There are other snap-on cases that are cheaper and offer better protections for the screen and back camera. However, if you want a light minimalist case with great design and similar feel to the naked phone while still offer good protection, than this might be the case for you.
Personally I found £17 a bit too much for this case, as I’ve much cheaper cases offer the same protection (see last two pics). However, those made the One X feel cheap in the hand and masked the beautiful design. With this snap-on cover, I have no problem show case this phone; the phone looks and feels just as good with this case on.
P.S. Click on the image in the po-up window to to launch the photo in a new window, then click the photo again to see it in full resolution, or you can right click an image below and select "open link in a new tab".
P.P.S. Photographed using the Galaxy s III, images looks very good even after compressed by XDA, I think it is a bit better than the camera on the One X.

As far as screen protector issue is concerned its the same for every screen protector out there coz One X has a slight curve n the protector is gonna develop bubbles if it reaches the sides..but its an Ultra Oleophobic Film n comes with a hardness rating of 3H so its almost impossible to scratch..
N all the hard cases of each n every phone come shy of the screen so its not an issue..n if u have the screen protector on then u don't have to worry coz as I said its one of the toughest protectors out there..
N as far as I can make out from the pics the camera is protected ..I mean its not gonna touch the surface when u put the phone down..its the same as my official c700 case..
But the fact is that I have searched a lot n also bought some cases for my HOX but all of them completely spoil the look n feel of One X..this is the most gorgeous looking cases out there..n its not cheap plastic but polycarbonate so it feels good too n won't get scratched that easily..
Sent from my Stunning White HTC One X

Just got mine in the mail, how would you suggest I apply the screen protector to avoid bubbles?

theROMinator said:
Just got mine in the mail, how would you suggest I apply the screen protector to avoid bubbles?
Click to expand...
Click to collapse
Clean your screen thoroughly first with the cloth n lift off any particles with a cello tape..make sure u dont have a single particle on the screen..then start applying the protector from the top n gradually peeling off the back layer as u go down..n make sure that while going down u remove any bubbles if any immediately even before completion of application as they will become harder to remove later on..
If u aren't sure then check out any video on YouTube..but don't spoil it coz its an awesome protector n separately it costs $13..
Sent from my Stunning White HTC One X

Well, the application was a success It's the best I've ever done while applying a screen protector. It was probably due to the fact that the film doesn't reach the edge . To anyone wondering, the edge of the film is hardly noticeable!
Sent from my HTC One X using Tapatalk 2

Thanks just ordered one for myself and one for my dad. I have had really good luck with SGP stuff in the past.

Im interested for this case but i have one question and pls answer me.
When taking picture and using flash do u have "ghost" or "foggy photos"?
Tanks and sry for my bad english

Zmaj99 said:
Im interested for this case but i have one question and pls answer me.
When taking picture and using flash do u have "ghost" or "foggy photos"?
Tanks and sry for my bad english
Click to expand...
Click to collapse
Not at all, there is no difference with photo taken with or without this case mate.
The best feature of this case is it makes the phone much securer to hold, as the stock back is very slippery. The back of this case is like a less glossy version of SIII.
P.S. Added couple of photos, the 1st one was taken with the case, and 2nd one without the case.

Thanks very much.
I ask this becouse i saw somewhere that problem with that case.Now im not concerned any more and ill buy this case
thanks

When the hell did sgp make this????

Rock Quicksand Case Question

I currently have a genuine HTC 700 clear case, but quite like the look and gripabity of the Rock Quicksand Case.
What I would like to know is, does the case form a lip near the screen edge or does it sit below or flush?
and
Does it protect the camera lens?
Thanks in advance.
Winny

Hi, I've got one of those cases and there is a noticeable lip around the edge of the case, it doesn't sit flush. It's not however what I would call a bulky case. The Camera is recessed inside the case so it will protect it somewhat when being put on tables etc. Personally I like the matt grippy texture of the case and they go well with the one x. Ciao
EN4CER69 said:
I currently have a genuine HTC 700 clear case, but quite like the look and gripabity of the Rock Quicksand Case.
What I would like to know is, does the case form a lip near the screen edge or does it sit below or flush?
and
Does it protect the camera lens?
Thanks in advance.
Winny
Click to expand...
Click to collapse

Thanks for the heads up. I'll be sticking with what I got then.
Just need a screen protector now that actually completely fits the screen...?
Sent from my HTC One X using xda app-developers app

EN4CER69 said:
Thanks for the heads up. I'll be sticking with what I got then.
Just need a screen protector now that actually completely fits the screen...?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Good luck finding one of those lol.
Ive tried many different screen protectors, and NON of them completely fill the screen.

Are you like me now, naked?
Sent from my HTC One X using xda app-developers app

EN4CER69 said:
Are you like me now, naked?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Naked is the best way, but some protection is ever appriciated! :laugh:

kahlua_khan said:
Hi, I've got one of those cases and there is a noticeable lip around the edge of the case, it doesn't sit flush. It's not however what I would call a bulky case. The Camera is recessed inside the case so it will protect it somewhat when being put on tables etc. Personally I like the matt grippy texture of the case and they go well with the one x. Ciao
Click to expand...
Click to collapse
Hi, could you please share some photos or if possible a video of device with the case?

DJouneyt said:
Hi, could you please share some photos or if possible a video of device with the case?
Click to expand...
Click to collapse
I have 2 Rock case, One black and one quicksand, they are VERY TIGHT fit, but they do not goes all around the device (top and bottom is less covered) but all corner are still well protected
I have modified the black one to fit inside my HTC dock so that it still charge the phone, it is a bit less stable than the HTC case when inserted in the dock but this does work...
The reason why I like those case better than the HTC is that they cover the camera and also provide rigidity from edge to edge... haven't used the quicksand much but this material is nice to hold in the hand. I have the international version not sure how they fit to the XL...
Seem to me that our phone was designed with the assumption we would be using a case...

P00r said:
I have 2 Rock case, One black and one quicksand, they are VERY TIGHT fit, but they do not goes all around the device (top and bottom is less covered) but all corner are still well protected
I have modified the black one to fit inside my HTC dock so that it still charge the phone, it is a bit less stable than the HTC case when inserted in the dock but this does work...
The reason why I like those case better than the HTC is that they cover the camera and also provide rigidity from edge to edge... haven't used the quicksand much but this material is nice to hold in the hand.
Seem to me that our phone was designed with the assumption we would be using case...
will try to provide pics later today or tomorrow...
Click to expand...
Click to collapse
I have ordered white SGP Ultra Thin Air Series case which is similar designed as Rock IMO but want to have an alternative if I wouldn't like it. Awaiting photos, thanks in advance :good:
Of course there are some pros and cons according to me and would like to know how is the Rock in comparison with SGP. The main negative point of Rock is that does not offer white color, and the positive one is that I love matte surfaces Below are my thoughts about SGP, when receive the case will finalize them.
Pros
Thin and solid design
Comes with a screen protector which does not cover the whole screen
Cons
Glossy surface, I prefer the matte
Does not protect the screen when device lays on the screen
There is a little protection of camera lens as I saw in users videos
?
Design for speakers could lower the noise but also may protect from outside impacts

DJouneyt said:
Pros
Comes with a screen protector which does not cover the whole screen
To me, this is a major negative as I would like total protection.
Cons
Does not protect the screen when device lays on the screen
Again, this is a negative as it would interfere with complete screen swiping!
Click to expand...
Click to collapse
I guess we are all different

EN4CER69 said:
I guess we are all different
Click to expand...
Click to collapse
For screen protector I wanted to cover the whole screen but do not want to spend about $15 more for just a screen protector. If I am not satisfied with the SGP's one may consider another And for the screen protection from the case, again I agree with you but then case would be more visible IMO. I am coming from full body cover, therefore search for the case that adds minimum bulk and protects the most but it is impossible I think So, we are not totally different but choices could vary

DJouneyt said:
For screen protector I wanted to cover the whole screen but do not want to spend about $15 more for just a screen protector. If I am not satisfied with the SGP's one may consider another And for the screen protection from the case, again I agree with you but then case would be more visible IMO. I am coming from full body cover, therefore search for the case that adds minimum bulk and protects the most but it is impossible I think So, we are not totally different but choices could vary
Click to expand...
Click to collapse
Casewise I have cracked it with the HTC HC 700... lush...and non hindering on swiping
* could do to be a bit more grippy tho

!!!htc one uag warning!!! Case scratches phone

Well today was the 1st time in about 2 weeks since buying my uag that i took the case off. And immidiately i noticed and the upper left corner there were scratches. I have a pretty good suspicion its from pressing the power button which then rubs the case agsinst the metal. You dont notice it when the case is on but this is redicilous. Definitely maked me angry i paid $35 for a case that ended up damaging my phone. Anyone else having this issue?
Sent from my HTCONE using xda app-developers app

yep I had the same with the official double dip case. Also black phone.
What do we learn from this? The black One is better protected when it's naked than when it's in the case
seriously though, I'm using a pouch now. Much better, doesn't do any damage.

Omg.. I just order this case
Sent from my HTC One using xda premium

Ouch that looks really bad! Anyone else with a Silver One get scratches because of their UAG case?

Nope, not a single scratch anywhere on my black One. I took my UAG completely off to check. Man this phone does feel great without a case, though!

No scratches or smudges on my silver one with my UAG case. Honestly, the black one scratches so easily that I wouldn't blame the case, I'd blame HTC for a design flaw. Especially because there are other cases that are known to scratch the black one. The official case from HTC has identical complaints. These scratches are the main reason why I decided to keep my silver one vs going with the black. The black iPhone 5 has similar issues.
Sent from my HTC One using xda premium

I ordered a navigator for my silver htc I hope this doesn't happen to me...
Sent from my HTC One using Tapatalk 4 Beta

I have had a UAG case for my silver One for a few weeks now. I took it off to look and no scratches anywhere. I was worried for a second.
Sent from my HTC One using xda premium

_MetalHead_ said:
No scratches or smudges on my silver one with my UAG case. Honestly, the black one scratches so easily that I wouldn't blame the case, I'd blame HTC for a design flaw. Especially because there are other cases that are known to scratch the black one. The official case from HTC has identical complaints. These scratches are the main reason why I decided to keep my silver one vs going with the black. The black iPhone 5 has similar issues.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
The first 2 days I used my phone I had it in a case. Then I noticed the little silver spots, so I stopped using the case
About a month later no more damage than I already had (using a pouch when I'm outside and indoors it's always naked)
sent from my HTC One using Tapatalk 4 (VIP)
__________________________________________
for the awesome guys over at the brony thread
Pony wallpapers! (updated 30/5)

these types of coatings really should be a bit more exotic...something like DLC which is incredibly hard and very resilient to scratches - i know because my watch is black DLC.
in terms of design they edges arent all that sharp but they could use a slightly bigger round in a few places for DLC to be safe.
DLC - diamond like carbon.

I had black iphone 5 naked and my wedding ring scratched the hell out of it in just one day. Just purchased this case as well, seeing this is disappointing but luckily i have the silver one. Usually i try to get two individual layer cases with much softer inner layer for this exact reason, but these cases usually are a little bulkier. thanks for the heads up though.

Just received my case hope I don't fall into any problems
Sent from my HTC One using Tapatalk 4 Beta

thom109 said:
The first 2 days I used my phone I had it in a case. Then I noticed the little silver spots, so I stopped using the case
About a month later no more damage than I already had (using a pouch when I'm outside and indoors it's always naked)
sent from my HTC One using Tapatalk 4 (VIP)
__________________________________________
for the awesome guys over at the brony thread
Pony wallpapers! (updated 30/5)
Click to expand...
Click to collapse
All I am saying is that if a soft rubber/TPU case is scratching the finish on a METAL phone, I just don't see how that can be the case's fault.

I just put mine on today. I'll check it often to make sure it isn't scratching.
Could it be because some dirt was on the phone when you put the case on? I really hope this doesn't happen due to a design flaw

My $.02
I had this case with my GS3 and it's not rough, and I don't think it's the case that's scratching your phone. I think it's the junk that just stuck in between the case and the phone. This can happen with any case, and it does. I always take my phone out of it's case every few days to clean the phone and the case. All it takes is one tiny piece of something rough to get in there and F*** everything up.
It sucks that it happened but I don't think it's the material that the case is made out of. I am still planning on getting this case.

bmoreboy02 said:
Well today was the 1st time in about 2 weeks since buying my uag that i took the case off. And immidiately i noticed and the upper left corner there were scratches. I have a pretty good suspicion its from pressing the power button which then rubs the case agsinst the metal. You dont notice it when the case is on but this is redicilous. Definitely maked me angry i paid $35 for a case that ended up damaging my phone. Anyone else having this issue?
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Contact the company and have them pay to get your phone fixed. That's BS.

SlimJ87D said:
Contact the company and have them pay to get your phone fixed. That's BS.
Click to expand...
Click to collapse
If there's some defect in the case then probably. But I doubt it's the case. He most likely had some gunk in the case. Take one tiny spec of sand and place it between your case and your phone and that one tiny piece will jack your stuff up. I don't see how that piece of dirt/sand is UAG's responsibility unless they have some kind of "no dirt on the inside guarantee" which they dont.

I own a Black HTC One and two UAG cases that I swap out often and not a single scratch at all. It's not HTCs fault or UAG, the OP must of gotten sand or some other hard particle underneath that scratched it up.

I put the case on right out the package. Cleaned the phone pretty good. The case is very snug so its really hard to get dirt in there. Also i bought it directly from uag so its not a knock off. I honestly dont know what did it but i remember before i even saw the marks when hittin the power button i always thought it was odd how the whole case kinda pushed down.
Sent from my HTCONE using xda app-developers app

1 month of use, and no scratches

Tempered glass screen protector

Anyone on the forums try one yet? The seller has 100% feedback for his/her ebay sales, although not all sales are for the glass protectors. I only saw that one person with our phone had purchased one. (veyoncee, are you on this forum???)

I would like to know about this as well. Does anyone know if Spigen is coming out with one?
Sent from my LG-E980 using Tapatalk 4 Beta

andygold said:
Anyone on the forums try one yet? The seller has 100% feedback for his/her ebay sales, although not all sales are for the glass protectors. I only saw that one person with our phone had purchased one. (veyoncee, are you on this forum???)
Click to expand...
Click to collapse
Can post a link to the one you are talking about?
When the f*ck did we get ice cream??

esimon311 said:
Can post a link to the one you are talking about?
When the f*ck did we get ice cream??
Click to expand...
Click to collapse
I did post the link in the original posting but i guess it got deleted. Here goes again but a bit differently.
http://(get rid of the spaces and brackets) item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=321121631126
If that does not work just go to ebay and search "optimus g pro tempered". The seller is " e-sparkler".

Here it is: http://www.ebay.com/itm/LG-Optimus-G-Pro-Tempered-Glass-Screen-Protector-Premium-0-4T-GlassView-New-/321121631126?pt=US_Cell_Phone_Screen_Protectors&hash=item4ac4573b96

jdk2 said:
Here it is: http://www.ebay.com/itm/LG-Optimus-G-Pro-Tempered-Glass-Screen-Protector-Premium-0-4T-GlassView-New-/321121631126?pt=US_Cell_Phone_Screen_Protectors&hash=item4ac4573b96
Click to expand...
Click to collapse
Yep! Thats it. Thanks. Dont know why it deleted the link in my original post.

This looks interesting. Anyone try it out yet?

I think I'm gonna have to try one of these.
When the f*ck did we get ice cream??

I'm curious as to how flat it lays against the screen. I assume it has total contact but I'm not 100% sure. I'd also like to know how well it plays with cases, with it having a thickness that is greater than the typical plastic screen protector. And then there's finger printing. I bought the AT&T/Casemate ones and they are grease magnets and somewhat hard to remove finger oils.

andygold said:
I'm curious as to how flat it lays against the screen. I assume it has total contact but I'm not 100% sure. I'd also like to know how well it plays with cases, with it having a thickness that is greater than the typical plastic screen protector. And then there's finger printing. I bought the AT&T/Casemate ones and they are grease magnets and somewhat hard to remove finger oils.
Click to expand...
Click to collapse
It makes full contact using a silicone adhesive. It does cause issues with hard shell cases. It should be about as fingerprint resistant as our original glass considering it is made from oleophobic glass.
Sent from my LG-E980 using Tapatalk 2

I bought one. Its very good. Resist fingerprint very well, much More so than not having one.
Sent from my Nexus 10 using xda app-developers app

Btw, it lays completely flat. It doesn't go over the tapered edge and actually leaves about 0.5mm of actual flat edge.
When first installed, it didn't completely adhere near the camera and raised slightly, but after about a day it bonded all the way.
Just be mindful about the bubbles when installing. Slightest dirt will show up as a bubble.
Sent from my Nexus 10 using xda app-developers app

philoso said:
I bought one. Its very good. Resist fingerprint very well, much More so than not having one.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
philoso said:
Btw, it lays completely flat. It doesn't go over the tapered edge and actually leaves about 0.5mm of actual flat edge.
When first installed, it didn't completely adhere near the camera and raised slightly, but after about a day it bonded all the way.
Just be mindful about the bubbles when installing. Slightest dirt will show up as a bubble.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
How is it for light transmission...does the anti-smudge property block light (like a matte screen protector does)?
If it does smudge, is it relatively easy to remove them? (my Case-Mate vinyl protectors hold onto smudges, needing a liquid cleaner to remove the grease).
During your installation did you trap any dust, and if so, is the silicone adhesive forgiving? Basically, can you remove and reapply or will that possibly leave permanent fingerprints on the adhesive as well as dust?
If you had to do it over again, would you still get this product or try something else?

If you've used spigen glass, they are identical in my opinion.
It basically comes down as the best screen protector you can buy. You won't go back to using any other type of protector.
You can read up on spigen glass it applies for this as well.
Sent from my Nexus 10 using xda app-developers app

philoso said:
I bought one. Its very good. Resist fingerprint very well, much More so than not having one.
Sent from my Nexus 10 using xda app-developers app
Click to expand...
Click to collapse
I'm curious. How long did it take to get and did you buy from esparkler? Also, the picture kind of makes it look like it has a matte coating, which I don't want, can you confirm if it is gloss or matte? Thanks man.
Sent from my LG-E980 using Tapatalk 2

lessthanzach said:
I'm curious. How long did it take to get and did you buy from esparkler? Also, the picture kind of makes it look like it has a matte coating, which I don't want, can you confirm if it is gloss or matte? Thanks man.
Sent from my LG-E980 using Tapatalk 2
Click to expand...
Click to collapse
I live in California, ill say about two weeks or so. Yes from same seller that OP listed(esparkler).
Matte coating? Gloss? Its just glass. There is no matte or gloss coating. Its just very clear.
Sent from my Nexus 10 using xda app-developers app

Mine is on the way...From Korea...to Michigan.
ETA .... Mid August LOL

AKA_Rizzo said:
Mine is on the way...From Korea...to Michigan.
ETA .... Mid August LOL
Click to expand...
Click to collapse
Get there yet?
Sent from my LG-E980 using Tapatalk 4 Beta

Nope. When it does I will post in this thread.
It's a city over from me, So I suspect I'll get it today.

Alright, I got my glass protector today.
I'll give you the bad news, I do not have a photo of it on the phone..But I will cover everything so you won't miss it.
Packaging
The Envelope and the product both had a bubble wrap element to them. So the product made it here safe and I bet yours will too.
The Robot is my watermark and it covers my address.
Sellers Address
It's only worth $8.00 to them LOL
The opening process in order.
They included two Home Buttons
This will let you press the button with the glass on. It's not very tall so have no worries about it grabbing. My Tough Case it higher from the screen than the button.
Alcohol wipe,Home Buttons and a cheap cloth
The glass
It has very accurate cut outs for Home Button,Speaker and the Sensor/Camera area.
Application.
Scotch tape will help you remove any lint after you clean it. It will remove it from the adhesive side of the glass.
My adhesive side plastic cover stayed on the glass and the pull tab came off. It took a finger nail on the Speaker slot to pull it up and off.
I lined it up with the home button as it gives a 360* range of center to focus on. I then let that side rest down and gently let it drop down and on.
If you do it this way you will get to watch as it will pull itself to the OGP screen, It's actually interesting to watch as the glass will change color as it adheres to the screen from Home button up to the speaker.
Impressions
It's really slick and smooth.
The screen is just as responsive as it was naked.
I do not see any finger prints while I've been touching it.
Make certain you have every spec of dust removed. The glass is rigid and it will allow for a larger bubble of air and make it more noticeable.
I work at a steel plant and carry my phone all day, I also live a very active life style so this glass will gets its strength tested.
If it scratches or breaks I will update this thread.
All in all after a hour of having it, I like it and so far have no complaints about it.

eBay glass screen protector

Hello,
I bought an off brand glass screen protector for my ONE and received and applied today. It's better than I imagined it would be. And way cheaper than the spigen or seidio. Watch the unboxing here
https://www.youtube.com/watch?v=4P4cPwP7w9U&feature=youtube_gdata_player
And what it looks like after being applied.
https://www.youtube.com/watch?v=peJZ7LlJoUA&feature=youtube_gdata_player
If you're interested in the same one I bought, I got this one : http://pages.ebay.com/link/?nav=item.view&id=331019841878
Sent from my HTC6500LVW using Tapatalk 2

I'm about to order one. How did you go about applying it?

Let us know how it goes after a weeks worth of experience with it! I'm interested in purchasing one myself!!!
Also, what is the thickness that you picked?

dnalevelc said:
I'm about to order one. How did you go about applying it?
Click to expand...
Click to collapse
Very carefully. Lol. I lined up the bottom edge with where the metal and glass meet. Its easier than explained. I did mess up the first time, it was crooked. I used tape to pull up the screen protector then lined it up again. The instruction says to push down on the center. I didn't have to it automatically started to suck itself onto the phone screen. Definitely an interesting thing to watch. It stopped before it was completely adhered. So I did have to put pressure on the edge. The are tiny micro bubbles that are seen immediately after adhesion, but they dissipate after some time. however my corners seem to not be adhered correctly. I left it over night with an iPad on top to add weight hoping it would flatten out. No such luck. I'm wondering what else i can try...
Sent from my HTC6500LVW using Tapatalk 2

aljr1021 said:
Let us know how it goes after a weeks worth of experience with it! I'm interested in purchasing one myself!!!
Also, what is the thickness that you picked?
Click to expand...
Click to collapse
I will. It's 0.4 mm thickness. I can tell you this the oleophobic coating is worth it. Plastic screen protectors are always greasy and you can't seen to wipe it off enough. These don't have that problem. I'll keep you updated though.
Sent from my HTC6500LVW using Tapatalk 2

I have one of these, from the same supplier arriving this week. Do you use a case on your phone? Interested to know if this interferes with the fit of it if you do.
Interesting to hear your account of fitting this. I thinks i will securely tape a carefully aligned straight edge steel ruler to the phone and use that as a bump stop type tool to try and get it on first go.

adamjamess said:
I will. It's 0.4 mm thickness. I can tell you this the oleophobic coating is worth it. Plastic screen protectors are always greasy and you can't seen to wipe it off enough. These don't have that problem. I'll keep you updated though.
Sent from my HTC6500LVW using Tapatalk 2
Click to expand...
Click to collapse
You reffered to the SGP model of the glass screen protector, due to the packaging.
My question, how sharp are the edges of this screen protector with swiping the toolbar down for example, since SGP released a rounded version of the protector to get the sharp edges of.

astmacca said:
I have one of these, from the same supplier arriving this week. Do you use a case on your phone? Interested to know if this interferes with the fit of it if you do.
Interesting to hear your account of fitting this. I thinks i will securely tape a carefully aligned straight edge steel ruler to the phone and use that as a bump stop type tool to try and get it on first go.
Click to expand...
Click to collapse
I'm using this protector (same Chinese) knockoff I bought on amazon. With a super sweet case/bumper also purchased on amazon.. the glass is slightly narrower than the stock screen. I have no issues with the glass and the case.
Case : http://www.amazon.com/gp/aw/d/B00C3HA9VI/ref=ya_aw_oh_pit
Glass : http://www.amazon.com/gp/aw/d/B00DNWJIIC/ref=ya_aw_oh_pit
Tapped via TapaCrap from my Goggle Edition HTC One

Flomaster said:
I'm using this protector (same Chinese) knockoff I bought on amazon. With a super sweet case/bumper also purchased on amazon.. the glass is slightly narrower than the stock screen. I have no issues with the glass and the case.
Case : http://www.amazon.com/gp/aw/d/B00C3HA9VI/ref=ya_aw_oh_pit
Glass : http://www.amazon.com/gp/aw/d/B00DNWJIIC/ref=ya_aw_oh_pit
Tapped via TapaCrap from my Goggle Edition HTC One
Click to expand...
Click to collapse
Same applies for my last post. How's yours,sharp edges and do they annoy you?

Stormingsoul said:
You reffered to the SGP model of the glass screen protector, due to the packaging.
My question, how sharp are the edges of this screen protector with swiping the toolbar down for example, since SGP released a rounded version of the protector to get the sharp edges of.
Click to expand...
Click to collapse
They are beveled edges, nothing sharp. Feels good.
Sent from my HTC6500LVW using Tapatalk 2

Stormingsoul said:
Same applies for my last post. How's yours,sharp edges and do they annoy you?
Click to expand...
Click to collapse
They aren't sharp like a piece of glass in a picture frame. It's somewhat beveled but not rounded off and super smooth. Well worth the money for me.
Tapped via TapaCrap from my Google Edition HTC One.

adamjamess said:
I will. It's 0.4 mm thickness. I can tell you this the oleophobic coating is worth it. Plastic screen protectors are always greasy and you can't seen to wipe it off enough. These don't have that problem. I'll keep you updated though.
Sent from my HTC6500LVW using Tapatalk 2
Click to expand...
Click to collapse
ah, okay dope, thanks man. May order soon tho!! But I'm still waiting for some stuff for my phone so after that I'll see if you got any updates on the screen!

Got the same screen protector from the same supplier as the OP today.
Very easy to install. No bubbles
Nice rounded edges, and as it is lightly smaller than the screen, my case fits well.
Texture very slick. Once on and in the case you wouldn't actually know it has a screen protector on apart from the small rise next to each speaker which you would take as part of the phone if you weren't familiar with the HTC One..

I will never go back to plastic SPs. This is legit! Even though an edge didn't completely adhere this thing rocks.
Sent from my HTC6500LVW using Tapatalk 2