Develop Bugs

SGP Ultra thin Air

Just ordered this gorgeous case for my One X..its by Spigen only n looks amazing..will post pics n review on receiving it..
http://www.spigen.com/cell-phone/htc/one-x/htc-one-x-ultra-thin-air-series.html
Sent from my Stunning White HTC One X

Looks good, do you know whether it will protect the camera?
Sent from my HTC One X using XDA

Hey guys.
The most concerning thing for me was protecting the camera lens. After looking around I purchased this one in blue from Ebay for under 8 quid and it's feels, looks and fits the phone perfect and fits around the camera lens snuggly and protrudes approx 1 ml above the lens allowing us to lay it down on front or back without the phone touching the surface at any time. Highly recommended, I have included a link for u to see the case for urself.
http://forum.xda-developers.com/showthread.php?t=1604911
Sent from my HTC One X using xda premium

dannysmith43 said:
Looks good, do you know whether it will protect the camera?
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Yes it does...it forms a lip around the camera..so no worries
Sent from my Stunning White HTC One X

Thanks, brought one from UK eBay site for £17 (free delivery), also included an Oleophoblic screen cover.

Bigmille said:
Thanks, brought one from UK eBay site for £17 (free delivery), also included an Oleophoblic screen cover.
Click to expand...
Click to collapse
Please post some pics n review when u receive it coz mine is gonna take more than a week as it has to be delivered to me in India all the way from US..thanks..
Sent from my Stunning White HTC One X

Looks nice, looking forward to some pics!

Thanks LakshayX.
I checked out your link and decided to order the SGP Ultra thin Air in soul black from Amazon UK for £19. It arrived this morning and I have to say it's a great case and fits superbly, looks good and despite not being the cheapest case available it's certainly worth the money.

rider5512 said:
Thanks LakshayX.
I checked out your link and decided to order the SGP Ultra thin Air in soul black from Amazon UK for £19. It arrived this morning and I have to say it's a great case and fits superbly, looks good and despite not being the cheapest case available it's certainly worth the money.
Click to expand...
Click to collapse
Ya I have been using SGP cases for some time now and as far as I have tried these are one of the best cases out there..that's y I am a SGP fan..can u please post some pics...m really eager to see some real life pics...thanks..
Sent from my Stunning White HTC One X

Can someone plz post pics？
Sent from my HTC One X using Tapatalk 2

I received my Ultra Thin Air case this morning, took some quick pictures before went to work.
After using it for a day, here are my impressions:
The good points:
The case feels similar to the back of Galaxy S III, with the non-slippery coating/plastic. But it is less glossy so it does not attract grassy finger prints as much as the S III.
The case feels very good in the hand, it is extremely light, and you almost fell no weight difference with the case on.
It looks great, fitting is almost perfect, the only minor issue I can find is some of the speak grills don’t link up perfectly with the grill cut outs on the case. This is a minor cosmetic issue and the only fault I can find.
The case does protect all the corners of the phone, and will not come off that easy consider it does not wrap around the phone on all sides.
The Not so good points:
This case will not protect the screen when you lay it face down, as it doesn’t have raised lips around the sides.
The case does protect the camera lenses as it protrude very slight around the lenses (maybe 0.5mm), But it is too shallow for my liking, so I’ll be using a cut out from a screen protector to cover it.
The included screen protector is too narrow for my liking. The side cut out is the same width as the screen.
The conclusion:
There are other snap-on cases that are cheaper and offer better protections for the screen and back camera. However, if you want a light minimalist case with great design and similar feel to the naked phone while still offer good protection, than this might be the case for you.
Personally I found £17 a bit too much for this case, as I’ve much cheaper cases offer the same protection (see last two pics). However, those made the One X feel cheap in the hand and masked the beautiful design. With this snap-on cover, I have no problem show case this phone; the phone looks and feels just as good with this case on.
P.S. Click on the image in the po-up window to to launch the photo in a new window, then click the photo again to see it in full resolution, or you can right click an image below and select "open link in a new tab".
P.P.S. Photographed using the Galaxy s III, images looks very good even after compressed by XDA, I think it is a bit better than the camera on the One X.

As far as screen protector issue is concerned its the same for every screen protector out there coz One X has a slight curve n the protector is gonna develop bubbles if it reaches the sides..but its an Ultra Oleophobic Film n comes with a hardness rating of 3H so its almost impossible to scratch..
N all the hard cases of each n every phone come shy of the screen so its not an issue..n if u have the screen protector on then u don't have to worry coz as I said its one of the toughest protectors out there..
N as far as I can make out from the pics the camera is protected ..I mean its not gonna touch the surface when u put the phone down..its the same as my official c700 case..
But the fact is that I have searched a lot n also bought some cases for my HOX but all of them completely spoil the look n feel of One X..this is the most gorgeous looking cases out there..n its not cheap plastic but polycarbonate so it feels good too n won't get scratched that easily..
Sent from my Stunning White HTC One X

Just got mine in the mail, how would you suggest I apply the screen protector to avoid bubbles?

theROMinator said:
Just got mine in the mail, how would you suggest I apply the screen protector to avoid bubbles?
Click to expand...
Click to collapse
Clean your screen thoroughly first with the cloth n lift off any particles with a cello tape..make sure u dont have a single particle on the screen..then start applying the protector from the top n gradually peeling off the back layer as u go down..n make sure that while going down u remove any bubbles if any immediately even before completion of application as they will become harder to remove later on..
If u aren't sure then check out any video on YouTube..but don't spoil it coz its an awesome protector n separately it costs $13..
Sent from my Stunning White HTC One X

Well, the application was a success It's the best I've ever done while applying a screen protector. It was probably due to the fact that the film doesn't reach the edge . To anyone wondering, the edge of the film is hardly noticeable!
Sent from my HTC One X using Tapatalk 2

Thanks just ordered one for myself and one for my dad. I have had really good luck with SGP stuff in the past.

Im interested for this case but i have one question and pls answer me.
When taking picture and using flash do u have "ghost" or "foggy photos"?
Tanks and sry for my bad english

Zmaj99 said:
Im interested for this case but i have one question and pls answer me.
When taking picture and using flash do u have "ghost" or "foggy photos"?
Tanks and sry for my bad english
Click to expand...
Click to collapse
Not at all, there is no difference with photo taken with or without this case mate.
The best feature of this case is it makes the phone much securer to hold, as the stock back is very slippery. The back of this case is like a less glossy version of SIII.
P.S. Added couple of photos, the 1st one was taken with the case, and 2nd one without the case.

Thanks very much.
I ask this becouse i saw somewhere that problem with that case.Now im not concerned any more and ill buy this case
thanks

When the hell did sgp make this????

[REVIEW] Incipio Feather for HTC One

I had this case on the HTC 8X in grey and it was easily one of the best cases I've ever had on any phone. The thinness, feel and texture was great.
As a first case for the HTC One I decided to buy this one but in black instead of grey to match with the light aluminum. It's a great case, it feels great, adds grip and the matte color is awesome. The grip and feeling on the back is superb. However, for that matte look, the black case texture/material is a little different than the one I had on the grey for the 8X.
It attracts finger prints and sweat or grease of your fingers. If it wasn't for this, this case would be perfect, at least for me.
If you don't live on a humid place or don't have have problems with finger prints, get this case by all means. Where I live it's almost 80%-95% humid all year so even if I don't have sweaty hands, it's inevitable that they get moist.
To sum up, it's a wonderful case, despite the problem with the smudges on the back. For that detail alone, it won't be for anyone as it would need to be cleaned two or three times a day to avoid the greasy/moist look on the back.
I do plan to get one in grey as the one I had on the 8X had an even better texture and feel and it didn't attract stains or finger prints at all. AT ALL. It was also a much of a darker grey that it showed on the pictures and I liked it even more when I got it.
For scratch protection, minimum bulk and great look and feel, this is a very good case.
View attachment 2097786 View attachment 2097787 View attachment 2097788 View attachment 2097789 View attachment 2097790
PS: I have a MEIFENG (Bear Motion) in grey and a black Nillkin case on the way. I will post about them when they get here.

WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!

My problem with the case is the open top and bottom.

djq said:
WOW that looks amazing. never heard of this brand case i am going to have to pick one up. thanks for your review!!
Click to expand...
Click to collapse
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
OGhoul said:
My problem with the case is the open top and bottom.
Click to expand...
Click to collapse
I like the open top and bottom because it adds to the lightweight of the case and allows the natural aluminum color to be displayed prominently. The accessibility of the USB port and the power button is great because there is nothing around them.
This kind of case is only for scratch protection but that's the kind I'm always looking for.

I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!

ajua said:
You are welcome. Incipio is a known brand but not in all countries, they make cases for almost every smartphone.
Click to expand...
Click to collapse
thats why i love this forum i learn something i may have never found out about

joudbren said:
I've also recently purchased this case in black. I LOVE the look of this case and one of the main features I like is that it still manages to maintain the ultra slim look and feel of the HTC One. This case really does fit well and doesn't detract from the stellar good looks of the phone.
One thing I do look for in these slim cases is that if the top edge of the case is slightly raised above the glass. That's a positive for me as I do not use screen protectors. With the top edge of the case raised just a hair it makes it easier to put my phone face down without worrying about scratching the glass. The Incipio Feather does have this very slight edge thankfully.
The only downside so far is that I've had to return my first case due to cracks. The two top corners of the case started to show stress cracks for some reason. In fairness they could have already been there as the first case I bought was already opened at the store and could have been a previous return. I didn't really check it that closely. It could have also been from me being a little aggressive taking the phone out of the case once to show somebody how slim it was. It fits really well so I may have forced it a little too hard.
The store did replace the case as it was previously opened and I checked the new one pretty carefully so no issues so far with the replacement. I'll post back here if any cracks appear again. Just in case you get one, be careful removing or installing the case and you should be fine. If you want the ultimate in good looks, decent grip and scratch protection then you won't go far wrong with this one. If you're one of those folks that likes the big armoured cases then this one isn't for you and nothing to see here.
This case will give you some basic protection while still maintaining the look and feel of the phone. And admit it, the look and feel of the HTC One is at least half or more of the reason you bought this awesome phone in the first place! Cheers!
Click to expand...
Click to collapse
I'm very careful with my phones and cases. I hope yours was only a detail you didn't see when you bought it.
How are you doing with the finger smudges on the back of this case? It's better than I initially thought but I still have to clean it often.
djq said:
thats why i love this forum i learn something i may have never found out about
Click to expand...
Click to collapse
Everyone is learning something on this forum all the time

Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.

Tuppidsay said:
Just something i've noticed since i bought this case. Both the small strips on the sides have cracked. The case is awesome and i really don't care but be for-warned if you are picky.
Click to expand...
Click to collapse
You can contact Incipio about this. The case comes with a one year warranty and I'm sure they'd be willing to cover that and replace it.:good:

I've bought a few cases for the One and this is definitely my favorite, all the rest I enjoyed but missed the slim line feel. The incipio is the best of both worlds.
Sent from my HTC_PN071 using Tapatalk 4 Beta

Just ordered one of these.
I'm seeing a lot of reviews on Amazon with the lighter colored ones hazing up flash pictures. Seems to be a common thing with close cutouts for the LED. Black cases are going to be the best to avoid flash interference.

Got mine and yes it's definitely one of the most minmalist cases I've ever used. Be careful with this one as it doesn't afford much in the way of drop protection but you already knew that...
The lip over the screen is a bit shorter than I'd like, still need to be wary of setting it down screen down just in case.
However for those that prefer the naked feel but don't want to be paranoid of scratching the back when sitting on a table, you will like this!
Be wary the plastic cutout piece along the top where the volume rockers and usb charging port are quite thin and can break if stressed too hard when putting the case on and especially taking it off, just take you time and be gentle.
The black finish does show finger grease but is easily cleaned. The incipio dual is the same way. At least it doesn't scratch super easy like some of the smooth and glossy backs.
No case is perfect, that's why I have a drawer full of different cases!

I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...

I picked up a case for my HTC One at best buy. It looks 100% identical except for the logo on the back of the case. Very nice case.

icepixie said:
I like the minimalist look, but does anyone know of any similar type 'snap on' cases that has a bigger lip over the corners/edges so that the screen is more protected?
My friend has this case in grey, and hers started peeling/chipping on the back after a few months of use. She contacted Incipio and they'll be sending her a new case which is good...
Click to expand...
Click to collapse
There is the Poetic Palette and Nillkin Hard Case/Shell. I can't say about the front lip for the screen as I don't own them but you can search for pictures and see if it is more prominent than the lip on the feather.

Looks nice and very slim!! :laugh:

Where can I find power bank wireless charger?
Where can I find power bank wireless charger?
I want to get one.How Can i get it

DX BOX Aluminum Bumper

Just wanted to post this item as I have just received one and I will say that it is pretty much perfect for what I wanted.
It is nicely packaged, includes extra screws and protects the corners while being extremely light and maintaining the One's premium feel.
It does NOT protect the back side, even on a table. This is fine for me as all I really care about is denting the corners. Also the power button takes a bit getting used to hitting as it is recessed, but there is no way around this with this design.
It took almost 3 weeks to get here and I will probably order a spare silver one.
I have attached some pics for you.
Enjoy
http://dx-box.com/0-6mm-luxury-air-...-bumper-blade-case-for-htc-one-m7-silver.html

We're already discussing this bumper in a different thread. It's a nice bumper. I have the same in silver
Sent from my HTC One using xda app-developers app

Just received mine today (black) looks really slick once fitted.
I had to place a strip of black electrical pvc tape on each inside edge as out the box its a bit loose.
Just ordered a black vinyl cover for the back to protect it from scratches.

SimonCraddock said:
Just received mine today (black) looks really slick once fitted.
I had to place a strip of black electrical pvc tape on each inside edge as out the box its a bit loose.
Just ordered a black vinyl cover for the back to protect it from scratches.
Click to expand...
Click to collapse
Weird, mine isn't lose at all.
I ordered another one, a silver one I will let you know if that one is loose.
This really is the perfect product for me because all I ever do is dent the corners haha.

Its nice not having to guess where the volume button is now

SimonCraddock said:
Its nice not having to guess where the volume button is now
Click to expand...
Click to collapse
Yes, it is a surprisingly high quality volume rocker.

Hi,
Here are a few pics of my black on black. With an Xtreme guard on the back I screwed up a little bit. Anyway.

Nice I just ordered a red one.
Do you guys think that a back protector is needed?? I get my one on Saturday and I purchased a front screen protector but I'm starting to think I need a back one with three one being aluminum and all.
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<

DowntownJeffBrown said:
Nice I just ordered a red one.
Do you guys think that a back protector is needed?? I get my one on Saturday and I purchased a front screen protector but I'm starting to think I need a back one with three one being aluminum and all.
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<
Click to expand...
Click to collapse
I'm from the school of thought that A. we destroy the original engineering as little as possible B. some scratching, scuffing is reasonable wear and tear on an item. So, I do no see any point in using a back cover. Like I said, I have dropped the phone 3 times and dented the top corners and it has create a small gap on one corner so I think it's important to protect the corners. For me I also have accidental warranty so if I smash the screen it's only $100 to get a replacement.
The feel of this phone is too nice to ruin it with plastic film.

Looks nice, does it add much weight to the phone and how easy is it to install and finally would it okay with a glass protector?
Sent from my Nexus 7 using xda app-developers app

My question as well. Would this fair okay with the spigen glas.tr protector?
I have held one in hand and it is quite light, feel like it doesn't add much weight if any at all, definitely not very noticeable from what I thought. Also very easy to install. Just curious about the glass screen protector.
Sent from my HTC One

jonny68 said:
Looks nice, does it add much weight to the phone and how easy is it to install and finally would it okay with a glass protector?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Dead simple install and is is VERY light. It is honestly the best IMHO. As for your Screen protector, I can't see why it wouldn't, unless the screen protector extends past the bezel.

about back protector = I would say it realldy depends on what kind of protection you need.
If keeping your device brand new and shiny for as long as possible, you should definitely get one. Otherwise, if a few scratches or wear marks are acceptable to you it is not something you have to consider. However I've always been a user of screen protectors as they are barely visible if applied correctly - and keep your device's value at its best if you plan to resale it someday.
I have tested many protections (incipio feather shine, dual pro, belkin, urban armor gear and finally this aluminium bumper.
I would not recommend this last one for daily use, as IMHO it really does not offer drop protection (shock absorbtion is not one of aluminium blends's characteristics) and prevent the screen to shatter in case you drop it from pocket height. For this reason I will stick with dual pro or UAG cases. But if you're really careful with your device, and just looking for small amount of protection and no bulk addition, then this might be the perfect one for you.
...oh, and I can confirm it adds not weight at all.

somebody with experience with this case ? it's a draco bumper for 17 dollar it's probarly fake but i want to try it. http://dx-box.com/draco-one-aluminum-bumper-for-new-htc-one.html

reinierkramer said:
somebody with experience with this case ? it's a draco bumper for 17 dollar it's probarly fake but i want to try it. http://dx-box.com/draco-one-aluminum-bumper-for-new-htc-one.html
Click to expand...
Click to collapse
I'm sure it's probably fine. The one non draco I have is great so I can't see the fake draco being crap so long as it is aluminum. Just a guess though.

I think it would fit just fine with a spigen gtr on there the glass it not edge to edge or top to bottom.
Sent from my HTC One using xda app-developers app

Does this bumper mess with reception at all?
Sent from my HTC One using xda app-developers app

I've got it and I think it does so I took it out. Not sure if it goes for everyone but from my experience it does. Especially when I was using WiFi at home when I didn't have the bumper case my WiFi signal was always full bar but soon as I put it on it fluctuates between 2 and 3 bars. Just my personal experience I've read from some people that it doesn't affect their signal so maybe mine was a factory defect
Sent from my HTC One using xda premium

Thanks for the quick response
Sent from my HTC One using xda app-developers app

Bryan05 said:
Does this bumper mess with reception at all?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Doesn't affect mine.

case for edge to edge display?

the case i have makes it hard to swipe from the edges. anyone have a recommendation of a cool case that leaves some room around the edges of the display?

What case you do you have? my O'Box Commuter makes it difficult but my Griffin Reveal is substantially easier.

kthoag said:
What case you do you have? my O'Box Commuter makes it difficult but my Griffin Reveal is substantially easier.
Click to expand...
Click to collapse
i honestly don't know... its the only one they had at the Verizon store when i got it.
the case does not cover the edges of the display, but i can only see a thin thin line of the bezel between the case and the screen.

I have this one and it's pretty cool, no problems with it.
http://www.amazon.com/SUPCASE-Motor...ie=UTF8&qid=1381348838&sr=1-9&keywords=moto+x

I just got this one today it comes up the sides just to the edge of the screen and doesn't come above it, covers the beloved dimple, but hardly adds any size to the phone to wreck the feel in the hand.
http://www.amazon.com/gp/product/B00EDI7QFM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I also have the below Incipio, better protection but ruined the shape of the phone I couldn't even leave it on a whole day.
http://www.amazon.com/gp/product/B00E4205BE/ref=oh_details_o02_s00_i03?ie=UTF8&psc=1
Steve

BackInA88 said:
I just got this one today it comes up the sides just to the edge of the screen and doesn't come above it, covers the beloved dimple, but hardly adds any size to the phone to wreck the feel in the hand.
http://www.amazon.com/gp/product/B00EDI7QFM/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
Steve
Click to expand...
Click to collapse
Does this have the "sandpaper" texture to it? It looks exactly like this case, except this one is hard: Amazon, Sandpaper Case

I have this case. Very slim, doesn't have a lip to protect the screen when you set it down but it gives you the edge to edge swipe you want.
http://www.amazon.com/Poetic-Palett...&qid=1383968176&sr=1-1&keywords=moto+x+poetic

I'm using the poetic palette as well.
I like it so far, but I also like the diatonic for the protection, button feel, and lip protection. However, the diatonic feels a bit too fat.
Sent from my XT1058 using Tapatalk

natezire71 said:
Does this have the "sandpaper" texture to it? It looks exactly like this case, except this one is hard: Amazon, Sandpaper Case
Click to expand...
Click to collapse
I wouldn't call it sandpaper but it does have a slightly rough texture.
I think the Anker, Sandpaper, Bear Motion and the Poetic are all the same case with different branding.

BackInA88 said:
I wouldn't call it sandpaper but it does have a slightly rough texture.
I think the Anker, Sandpaper, Bear Motion and the Poetic are all the same case with different branding.
Click to expand...
Click to collapse
I think the Sandpaper one is a hard case though. The Anker is flexible. I'm leaning towards the Anker--but yes. You're correct.

i got the quicksand. same as the anker sandpaper bear motion. it feels great and does not slide on slick surfaces. i think its the perfect case. only downside is it does not protect the glass.
i am giving away a couple of them maybe a few. over on the moto x support forums. go comment with an idea for the phone and get a chance to win it.
https://forums.motorola.com/posts/beb8b24717

Anyone try the Reveal case by Griffin? How does it compare to the SUPCASE monkey082506 had posted a link to earlier in this thread?

Slim (very slim) case

Broke the rear glass
Top-right corner is totally broken and there's a crack thru the whole glass.
At the moment I put some silicon on the corner to avoid pieces of glass from falling, but I need now a case, a very very very slim one.
Bought one from Amazon that was supposed to be slim but... the problem is that the cover on the two longer sides is too high, meaning it is higher than the white aluminium side. Not sure I can explain...
I'm looking for the slimmest and thinnest case that just covers the back and not much on the sides.
Any help?
Thanks

https://www.amazon.com/Spigen-Google-Coated-Surface-Excellent/dp/B07475C1VT/ref=sr_1_1?keywords=pixel+2xl+spigen+thin&qid=1559331787&s=gateway&sr=8-1-spell
I had this one and it was the thinnest I could find. The only real protection is on the back of the phone which proved to be what I needed most. It finally cracked one morning I woke up from my couch and did a full stretch putting my phone into my ceiling fan on high. The case initially took a little get used to due to me being accustomed to the excellent grip from the cloth official Google case. In short, is worth the price, absolutely! Would I buy again, No.

I know this one, too thick and on the sides is too high

Spigen thin fit
Sent from my Pixel 2 XL using Tapatalk

LoyalJedi said:
Spigen thin fit
Click to expand...
Click to collapse
That's what I have and it's really thin

This is an extremely thin case but not cheap. I have it and it super nice.
https://www.ipitaka.com/products/magcase-for-google-pixel-2?variant=4542502371356

tylermrsh said:
That's what I have and it's really thin
Click to expand...
Click to collapse
It has raised edges

thegios said:
It has raised edges
Click to expand...
Click to collapse
They're very small though

https://buypeel.com/products/super-thin-pixel-2-case?variant=52717314771
https://www.amazon.com/gp/product/B078TPN753/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Practically identical, and may be exactly what you're looking for. I have both, and love them.

gforceriders said:
This is an extremely thin case but not cheap. I have it and it super nice.
https://www.ipitaka.com/products/magcase-for-google-pixel-2?variant=4542502371356
Click to expand...
Click to collapse
+1 to this. My favorite case, but it scares me to carry it sometimes. Super nice, super thin. Don't imagine it will protect much though.

try this: https://www.ultimateshield.co.uk/co...ucts/ultimate-thin-case-for-google-pixel-2-xl

https://www.amazon.com/dp/B076BJG8YF/ref=cm_sw_r_cp_apa_i_r6B-CbCXH0X9W
By far the thinnest one I've owned and the way it fits around the edges is pretty flush. Fits like a glove and feels good in the hand. Not really good for protection though if you drop it, but more like a wrap to keep it from getting dinged up.
I can post a photo of mine later if you want one.
Sent from my Pixel 2 XL using Tapatalk

Curiousn00b said:
https://www.amazon.com/dp/B076BJG8YF/ref=cm_sw_r_cp_apa_i_r6B-CbCXH0X9W
By far the thinnest one I've owned and the way it fits around the edges is pretty flush. Fits like a glove and feels good in the hand. Not really good for protection though if you drop it, but more like a wrap to keep it from getting dinged up.
I can post a photo of mine later if you want one.
Click to expand...
Click to collapse
I'm actually interested in getting this exact case, but in Wine Red. Are there any issues with screen protectors? Would appreciate a photo as well.
Sent from my Google Pixel 2 XL using XDA Labs

Maverick Jester said:
I'm actually interested in getting this exact case, but in Wine Red. Are there any issues with screen protectors? Would appreciate a photo as well.
Click to expand...
Click to collapse
I no longer use glass screen protectors, moved to Skinomi(best screen protector I've found so far).
When I did use them, I used curved ones and the case fit EXACTLY to the edges of it. Everything fit like a glove.

Curiousn00b said:
I no longer use glass screen protectors, moved to Skinomi(best screen protector I've found so far).
When I did use them, I used curved ones and the case fit EXACTLY to the edges of it. Everything fit like a glove.
Click to expand...
Click to collapse
Good to know. I also use film screen protectors (currently using a Sparin one, as the Spigen was sold out at the time) as they don't have the issues that tempered glass ones suffer with curved screens.
Sent from my Google Pixel 2 XL using XDA Labs