I was very proficient at flashing custom ROMs onto my old HTC One V, but this past weekend I got a Virgin Mobile Galaxy S2, updated it via the Samsung official downloader to JB 4.2.1 (GB28) immediately. then, I downloaded the Framaroot apk onto my phone via play store and rooted with the Aragon hack. SuperSU is on my phone.
So, I've been reading and reading and READING in order to make SURE that I understand the process involved with customizing my new S2. Here is what I want on my phone: http://forum.xda-developers.com/showthread.php?t=2051513 (Paranoid Android) and in the instructions it says that I simply need this: http://forum.xda-developers.com/showthread.php?p=26295021
So, since I currently have GB28 and it is a Virgin Mobile phone, all I need to do is download this?
JB - Virgin Stock/Touch-Wiz Kernels
Available Kernels (ZIP Format): GB28 (Virgin) / FL14 (Virgin)
Available Kernels (TAR.MD5 Format): GB28 (Virgin) / FL14 (Virgin) <---and this one I can install using Mobile Odin, right?
Available Kernels (One-Click Format): GB28 (Virgin) / FL14 (Virgin)
And that will put CWM on my phone and I can then flash PA from recovery as I'm accustomed to? Nothing else? No need to worry about the stock modem?
I really appreciate the help!
No, those are stock kernels. You already have that on your phone. You need to flash a custom kernel. I recommend chris41g's el26. Flash the tar with pc or mobile odin, reboot to recovery, wipe everything, flash rom, ics modem(if needed), reboot, profit.
Sent from my SPH-D710 using xda premium
Yes an ICS modem is needed, that's the only thing I couldn't tell her in the other thread, I don't know what VM uses for the ICS modem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Yes an ICS modem is needed, that's the only thing I couldn't tell her in the other thread, I don't know what VM uses for the ICS modem.
Click to expand...
Click to collapse
Any ics modem will work for VM. It's the same principle as the GB27 modem working on my Boost phone. But I think the rom is a ctually FL26, but not sure there's a stand alone modem, which came out at the same time as Sprints FL24. But FL24 modem should work just fine. It works on Boost, no reason it shouldn't work on VM.
Sent from my SPH-D710 using xda premium
You are currently rooted - next step is custom recovery.
Download EL26+CWM tar from the repo (check the stickies)
Download FL24 modem zip, also from the repo
Download the AOSP rom of your choosing (ParanoidAndroid it looks like)
Download whatever gapps you want to use
-------------------------------------------------------------------------------------------------------------
Mobile Odin -> EL26+CWM.tar.md5
Pull battery when you see the Galaxy S2 logo.
Reboot to recovery by holding Volume Up and Power
Make a nandroid
Wipe Data, Cache, and Dalvik-Cache
Flash FL24 modem zip
Flash ROM
Flash Gapps
Reboot system
Adreaver said:
You are currently rooted - next step is custom recovery.
Download EL26+CWM tar from the repo (check the stickies)
Download FL24 modem zip, also from the repo
Download the AOSP rom of your choosing (ParanoidAndroid it looks like)
Download whatever gapps you want to use
-------------------------------------------------------------------------------------------------------------
Mobile Odin -> EL26+CWM.tar.md5
Pull battery when you see the Galaxy S2 logo.
Reboot to recovery by holding Volume Up and Power
Make a nandroid
Wipe Data, Cache, and Dalvik-Cache
Flash FL24 modem zip
Flash ROM
Flash Gapps
Reboot system
Click to expand...
Click to collapse
Thanks for the walk thru!
So, the Gingerbread kernel (Chris41g's repacked GB EL26+CWM5) is one that works with AOSP ROMs properly? Up to date, there has been no ICS or even JB repacked with CWM or TWRP that works with AOSP ROMs?
Referencing:
Recommended Kernel for Flashing in ICS (due to EMMC Bug)
GB - Stock EL26 Repacked Kernel (TAR.MD5 Format) (One-Click.EXE Format) *Thanks to chris41g!
Developer Thread/Site: http://forum.xda-developers.com/show....php?t=1416056
Notes: This is the recommended kernel for flashing. Kernel is GB based and will not work as a daily kernel on ICS.
Available Kernels (TAR.MD5 Format): EL26
Available Kernels (One-Click Format): EL26
zombiegirl2010 said:
So, the Gingerbread kernel (Chris41g's repacked GB EL26+CWM5) is one that works with AOSP ROMs properly? Up to date, there has been no ICS or even JB repacked with CWM or TWRP that works with AOSP ROMs?
Referencing:
Recommended Kernel for Flashing in ICS (due to EMMC Bug)
GB - Stock EL26 Repacked Kernel (TAR.MD5 Format) (One-Click.EXE Format) *Thanks to chris41g!
Developer Thread/Site: http://forum.xda-developers.com/show....php?t=1416056
Notes: This is the recommended kernel for flashing. Kernel is GB based and will not work as a daily kernel on ICS.
Available Kernels (TAR.MD5 Format): EL26
Available Kernels (One-Click Format): EL26
Click to expand...
Click to collapse
ICS repacks have the super brick bug. Generally anything with the word brick in the title is to be avoided.
Jb repacks and source built kernels for touch wiz work great as long as you stay on touch wiz. They sometimes have issues flashing aosp ROMs.
El26+cwm is the only kernel i am aware of that can flash anything, from any setup, with no issues.
Edit: you get a new kernel when flashing the ROM anyways. El26 is only to get you from tw to aosp.
Sent from my Epic 4g Touch on PACman
Adreaver said:
ICS repacks have the super brick bug. Generally anything with the word brick in the title is to be avoided.
Jb repacks and source built kernels for touch wiz work great as long as you stay on touch wiz. They sometimes have issues flashing aosp ROMs.
El26+cwm is the only kernel i am aware of that can flash anything, from any setup, with no issues.
Edit: you get a new kernel when flashing the ROM anyways. El26 is only to get you from tw to aosp.
Sent from my Epic 4g Touch on PACman
Click to expand...
Click to collapse
Oh! That makes sense now! Thank you guys so much! I'm feeling a lot better about this!
Oh, and I also noticed that Paranoid Android really isn't being updated anymore, so I've decided on PACman. Which version is the most stable right now? The latest Nightly or the most recent release?
zombiegirl2010 said:
Oh! That makes sense now! Thank you guys so much! I'm feeling a lot better about this!
Oh, and I also noticed that Paranoid Android really isn't being updated anymore, so I've decided on PACman. Which version is the most stable right now? The latest Nightly or the most recent release?
Click to expand...
Click to collapse
Latest build according to sniper's OP is v23.0.0. And from all accounts it runs smooth like butter, so go with that. You'll need to follow the OP, get Gapps, etc....good luck and enjoy flashing!
Sent from my SPH-D710 using xda premium
jdsingle76 said:
Latest build according to sniper's OP is v23.0.0. And from all accounts it runs smooth like butter, so go with that. You'll need to follow the OP, get Gapps, etc....good luck and enjoy flashing!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks!
zombiegirl2010 said:
Thanks!
Click to expand...
Click to collapse
I have successfully flashed PACman v23! Thank you guys SO MUCH!
Is the reason that it says that I have Sprint instead of Virgin Mobile, because the FL24 modem is a Sprint one?
zombiegirl2010 said:
I have successfully flashed PACman v23! Thank you guys SO MUCH!
Is the reason that it says that I have Sprint instead of Virgin Mobile, because the FL24 modem is a Sprint one?
Click to expand...
Click to collapse
That is correct...FL24 is a Sprint Modem...but you should be getting data, wifi, etc, just fine, correct?
Sent from my SPH-D710 using xda premium
Its all ok. Its because its a sprint rom. It wont hurt a thing. If you dont have 3g just search virginmobile ics modem and download (as a. Zip) and flash in recovery: D
▶▶Sent From My Epic Touch 4G running android 4.2.2!◀◀
HackingHacker said:
Its all ok. Its because its a sprint rom. It wont hurt a thing. If you dont have 3g just search virginmobile ics modem and download (as a. Zip) and flash in recovery: D
▶▶Sent From My Epic Touch 4G running android 4.2.2!◀◀
Click to expand...
Click to collapse
That is not entirely correct. Unlike jelly bean, ics modems were not released as carrier specific(see link). FL24 is the latest ics modem for Sprint, Boost, VM, etc...
http://forum.xda-developers.com/showthread.php?t=1764210
Sent from my SPH-D710 using xda premium
jdsingle76 said:
That is correct...FL24 is a Sprint Modem...but you should be getting data, wifi, etc, just fine, correct?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ah ok! Yes, it seems just fine so far.
I just checked my PRL and it is the same as it was on TW Stock. So, all seems okay.
zombiegirl2010 said:
Ah ok! Yes, it seems just fine so far.
I just checked my PRL and it is the same as it was on TW Stock. So, all seems okay.
Click to expand...
Click to collapse
When you flash a new modem, it never hurts to update prl and profile. Not sure if that option is available in PACman, but something to keep in mind regardless. Glad it's working for you. Have fun!
Sent from my SPH-D710 using xda premium
jdsingle76 said:
When you flash a new modem, it never hurts to update prl and profile. Not sure if that option is available in PACman, but something to keep in mind regardless. Glad it's working for you. Have fun!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ah ok, thanks!
hey, apps that require superuser access are taking FOREVER to get permission. Did I lose root? What should I do to fix that? I installed SuperSU to see if that will fix, but it keeps trying to install binary and isn't successful.
wait...I may have something. Let me see...
nope...same deal.
I had rooted with Framaroot. I'm trying to reinstall it to reroot, but it won't let me click "install"...only "cancel".
zombiegirl2010 said:
I had rooted with Framaroot. I'm trying to reinstall it to reroot, but it won't let me click "install"...only "cancel".
Click to expand...
Click to collapse
Install root checker from the play store
Sent from my SPH-D710 using xda premium
Related
What is this exactly? Is it a kernel to flash with roms for no more los? Or is it just a stock rom update? And is there an Odin?
Sent from my SPH-D710 using XDA App
PinnerProxy said:
What is this exactly? Is it a kernel to flash with roms for no more los? Or is it just a stock rom update? And is there an Odin?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
It is the kernel, modem and rom. However, you can only use the modem if you are on eg30. It will not work with eg12 or eg31.
EK02 can only be flashed from CWM.. It is a modem update. I am not sure what the roms and kernals are exactly, other than renamed.
I flashed ek02 from CWM about 4 hours ago and have had phenomenal service results. Data is quicker, no LOS of any sort, etc.
If you are not on EG30 right now, then don't bother even trying to flash this as there is no way. You can check your current modem by checking your baseband versions in setting, about phone.
enfurno said:
EK02 can only be flashed from CWM.. It is a modem update. I am not sure what the roms and kernals are exactly, other than renamed.
I flashed ek02 from CWM about 4 hours ago and have had phenomenal service results. Data is quicker, no LOS of any sort, etc.
If you are not on EG30 right now, then don't bother even trying to flash this as there is no way. You can check your current modem by checking your baseband versions in setting, about phone.
Click to expand...
Click to collapse
Not exactly. Only the modem can be flashed with CWM. The kernel and the rom can be odin'd. EK02 is the modem, kernel and rom (file system).
I still have EG30, latest sensation. The 31 problem causes hesitation to mess with modem. Should it? What's safe.
Sent from my SPH-D710 using xda premium
Idolhands86 said:
I still have EG30, latest sensation. The 31 problem causes hesitation to mess with modem. Should it? What's safe.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
EK02 is official as far as it was pushed via OTA. So it is safe to install. I have been running the whole package since early this morning and so far am happy with it.
crawrj said:
EK02 is official as far as it was pushed via OTA. So it is safe to install. I have been running the whole package since early this morning and so far am happy with it.
Click to expand...
Click to collapse
So, no going back?
Idolhands86 said:
So, no going back?
Click to expand...
Click to collapse
Only for the modem. You can't go back to EG30. The best you could do is to go back to EG12 or EG31. But so far EK02 is much better than EG30.
Also, sorry, but the development team put a lot of options up. With EG30, what would you recommend; the latest and greatest/stabliss?
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Stock makes sense. no evopun intended
Idolhands86 said:
Also, sorry, but the development team put a lot of options up. With EG30, what would you recommend; the latest and greatest/stabliss?
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
Stock makes sense. no evopun intended
Click to expand...
Click to collapse
I used this http://forum.xda-developers.com/showthread.php?t=1367971 for Odex.
I made this Deodexed based on his http://forum.xda-developers.com/showthread.php?t=1368180
To flash the modem follow this http://forum.xda-developers.com/show....php?t=1367695.
WiFi Speeds EG30-EK02
I just flashed my EG30 to EK02
I did a quick WiFi test first. I have attached a before and after.
Not sure if this is 100% the modem update. The phone had been on for 15+ hours and I did a complete cache wipe before the update.
Either way, It was interesting. My computer always gets between 19000kpbs - 30000kpbs but, my phone was never close....Not the case anymore.
ISP: COX in Orange County CA
Rom: StarBurst 1.9.8r (2.3.4)
Kernel: LoStExp+ 1.0.0.8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Danton1316 said:
I just flashed my EG30 to EK02
I did a quick WiFi test first. I have attached a before and after.
Not sure if this is 100% the modem update. The phone had been on for 15+ hours and I did a complete cache wipe before the update.
Either way, It was interesting. My computer always gets between 19000kpbs - 30000kpbs but, my phone was never close....Not the case anymore.
ISP: COX in Orange County CA
Rom: StarBurst 1.9.8r (2.3.4)
Kernel: LoStExp+ 1.0.0.8
Click to expand...
Click to collapse
I can confirm this also on pure stock.
Sent from my SPH-D710 using xda premium
Here is EG31 modem, WiFi...
is there a difference in 'modem' and 'radio'. i keep reading on this ek02 and some people use the words in the same sentence others use it as if they are to seperate items.
also, i am on eg30. can someone point me to a link that will update the actual modem
I wish I didn't update to eg31.
Sent from my SPH-D710 using XDA App
ejbmvp said:
is there a difference in 'modem' and 'radio'. i keep reading on this ek02 and some people use the words in the same sentence others use it as if they are to seperate items.
also, i am on eg30. can someone point me to a link that will update the actual modem
Click to expand...
Click to collapse
They are the same. Look up about 5 posts and you will see a link for the modem in one of my posts.
Sent from my SPH-D710 using xda premium
crawrj said:
They are the same. Look up about 5 posts and you will see a link for the modem in one of my posts.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
thanks crawj for the clarification. i used the flash method from you pointed to and all works fine so far
Is there going to be an EG30 modem in the wild I can flash so I can get back to total stock?
Crawrj, I noticed you said much better, are you referring to just the modem or the build as a whole? Speed? Smoothness? Thanks
Sent from my SPH-D710 using xda premium
Duce HD2 said:
Crawrj, I noticed you said much better, are you referring to just the modem or the build as a whole? Speed? Smoothness? Thanks
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Mainly the modem but I don't see any negatives over eg30 for the system. It was already super fast and smooth for me so I don't notice much of a difference there except when it comes to modem. use.
Sent from my SPH-D710 using xda premium
This ROM is completely stock with exception that root/busybox is included and it uses the stock(No CWM) kernel. Also no new modem for this build, so FC05 is the correct modem for this build.
All must be flashed through CWM
Factory reset \ Data format is HIGHLY recommended(use FORMAT ALL attached before flashing)
Stock Rooted FC06 ROM (v1.0)
md5 - 01694c4d77bfe23627bbc5a9a4ef6261
Stock Rooted De-odex'd FC06 ROM (v1.0)
md5 - e7b4f0f0edc312a335effb0409e930ee
Nice!
10 Char
Damn! already? gonna have to check it out
omg really op. lol
ty sir.
Fu#$ me that was FAST!
Thanks!!
You are the man, Calkuin!!
Damn you're quick.
Appreciate the efforts mate.
Holy crap, I didn't even get a chance to try FC05 yet. Thanks Calk you da man
Is there a modem?
Sent from my SPH-D710 using xda premium
Good lord I can't keep up! You guys are slamming. Thanks Calkulin!
p.s. I said there'd be a new leak before the recovery for FC05 was finished lol unless I've missed the recovery update notice.
**** I just installed FC05
Nice, can't wait to try this out. FC05 was great for me with the exception of no GPS. That's the first time i've had an issue with the GPS not working in any ROM for me.
WTF?
I can haz breether?
Geezus!
This s#!+ right here, ninja!!! THIS S#!+ RIGHT HERE!!!
Unfortunatelly gotta wait till I get home from work to try it.
Not the best timing for me.
Thanks a lot Calk.
Calkulin said:
This ROM is completely stock with exception that root/busybox is included and it uses the stock(No CWM) kernel.
All must be flashed through CWM, so flash the modem also in the same CWM session because once you reboot, you won't have CWM
Factory reset \ Data format is HIGHLY recommended(use FORMAT ALL attached before flashing)
Stock Rooted FC06 ROM (v1.0)
md5 - 01694c4d77bfe23627bbc5a9a4ef6261
Stock Rooted De-odex'd FC06 ROM (v1.0)
md5 - e7b4f0f0edc312a335effb0409e930ee
Click to expand...
Click to collapse
It says to flash the modem in the same session.. Where's the modem?
agat63 said:
Unfortunatelly gotta wait till I get home from work to try it.
Not the best timing for me.
Thanks a lot Calk.
Click to expand...
Click to collapse
flash through stock recovery or no dling at work?
You know I really wasn't looking forward to flashing a new leak today. Sigh whatever
Sent from my SPH-D710 using XDA App
darren.wlsn1 said:
flash through stock recovery or no dling at work?
Click to expand...
Click to collapse
Our IT department hate DL's.
And besides OP says to flash in CWM recovery. I'm on FC05 so no CWM.
I can haz link 4 modem?
Sent from my ICS'ed out SPH-D710
viper786 said:
It says to flash the modem in the same session.. Where's the modem?
Click to expand...
Click to collapse
That was leftover from my copy/paste, there is no FC06 modem, FC05 is the latest
As title says I'm new to this site I have only got Calkulin's E4GT 2 ICS Rom. Looking into getting a blend, I have a White E4GT back on GB EL29. Already rooted obviously. All Roms will be looked at, I'm looking for something like ICS but battery saving and themes and such are applicable.
also
What is the difference in these kernels/modems? Like mine is EL29, and there is EL26 and stuff, when flashing a new rom will it change by itself or do I need to self flash a new kernel, and I had the issue with Calkulins ICS where the yellow triangle appeared, so I followed qbking77's guide on how to fix that, if I were to flash say, http://forum.xda-developers.com/showthread.php?t=1538848 this rom, or so other that needs a new kernel, how would I (if possible) keep my kernel to make sure that yellow triangle stays away?
I'm not sure how to keep the triangle away with ICS but, with gb I've flashed almost every rom, and el29 is the most latest release for the epic touch.
Assuming you know what modems are, each and every modem reacts differently on every phone(I'm pretty sure no one knows why).. So you'll just have to play around with modems to find your best combination,
as far as the kernels go, some roms come with a certain kernel others use the one previously on your phone(I beleive), just read the rom info an it should tell you if it includes a certain rom
Edit: ah sorry.. a modem is the radio in your phone, it's what communicates between the tower and phone for service, wifi and what not
=D Double edit: this might help out to..
http://forum.xda-developers.com/wiki/Samsung_Epic_4G_Touch
Sent from my SPH-D710 using xda premium
krisI0N said:
I'm not sure how to keep the triangle away with ICS but, with gb I've flashed almost every rom on el29, which is the most latest release for the epic touch.
Assuming you know what modems are, each and every modem reacts differently on every phone(I'm pretty sure no one knows why).. So you'll just have to play around with modems to find your best combination,
as far as the kernels go, some roms come with a certain kernel others use the one previously on your phone(I beleive), just read the rom info an it should tell you if it includes a certain rom
Edit: ah sorry.. a modem is the radio in your phone, it's what communicates between the tower and phone for service, wifi and what not
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ah, this is helpful for the second post, thank you. I'm still wondering as to what Roms I should try next, I liked Calkulin's but I'm one for trying everything till I find the one for me. Any suggestions will be nice.
Everybody has different likes and needs when it comes to roms. I just flashed the fd24 leak earlier today and so far its very nice. My main need is stability and the official leaks are the most stable in my opinion. Read a lot and ddcide for yourself. Ths nocturnal venum rom has also caught my eye once they get the rest of the bugs out.
Sent from my SPH-D710 using Tapatalk
someguyatx said:
Everybody has different likes and needs when it comes to roms. I just flashed the fd24 leak earlier today and so far its very nice. My main need is stability and the official leaks are the most stable in my opinion. Read a lot and ddcide for yourself. Ths nocturnal venum rom has also caught my eye once they get the rest of the bugs out.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I heard about FD24, did anyone post a review ?
StoniestCookie said:
I heard about FD24, did anyone post a review ?
Click to expand...
Click to collapse
Hehe.. Your keeping me up all night.. Hold on lol
http://forums.acsyndicate.net/showthread.php?5267-EL29-to-FD24-official-ICS-update-zip
Sent from my SPH-D710 using xda premium
krisI0N said:
Hehe.. Your keeping me up all night.. Hold on lol
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Eh, I found the review, but I mean it looks nice, but I also found Mijjz's blend which looks really nice. How would I install it if I'm running EL29, but it says FD19? Just go into recovery and format all then flash it? Or do I need to odin my phone and flash a FD19?
StoniestCookie said:
Eh, I found the review, but I mean it looks nice, but I also found Mijjz's blend which looks really nice. How would I install it if I'm running EL29, but it says FD19? Just go into recovery and format all then flash it? Or do I need to odin my phone and flash a FD19?
Click to expand...
Click to collapse
Honestly, I have not played around with the ICS leaks.. So I couldn't tell you, I do know that if you restore a backup from gb you can mess your phone up pretty bad. No one wants a bricked phone lol.. I might get the "ota" a shot though
Sent from my SPH-D710 using xda premium
krisI0N said:
Honestly, I have not played around with the ICS leaks.. So I couldn't tell you, I do know that if you restore a backup from gb you can mess your phone up pretty bad. No one wants a bricked phone lol.. I might get the "ota" a shot though
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I restored a GB backup when I was running Calk's E4GT 2... So, there's no way for me to use this rom? I'm really confused.
You can use an ICS Rom and flash it through cwm but you'll have to use Odin to flash if u wanna go back to a gingerbread rom
Sent from my SPH-D710 using xda premium
nicson8 said:
You can use an ICS Rom and flash it through cwm but you'll have to use Odin to flash if u wanna go back to a gingerbread rom
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
So, I can just put it on my sd card run Calk's flash all and flash the rom from CWM? Sorry I'm making this complicated, don't want to risk bricking my phone.
StoniestCookie said:
So, I can just put it on my sd card run Calk's flash all and flash the rom from CWM? Sorry I'm making this complicated, don't want to risk bricking my phone.
Click to expand...
Click to collapse
If you are using a GB rom you can restore a GB rom, but if you are on ICS you cannot restore back to any roms. You need to go back to Gb then installing the rom. In order for you to go back to GB you can follow QBking77 video (youtube) on how to root your samsung epic 4g touch. (by re-rooting it brings you back to a fresh GB rom, with no worries of bricking your phone).
I suggest reading here How Not to Brick your E4GT
You can nandroid from an ICS rom back to a GB rom, I did when I was on Calk's ICS rom to get a gps fix.. Although, there is a risk in bricking it, its up to you. Personally I'm on Venom's ICS rom and it is by far the most stable ICS leak I've used, and has great battery life as well.
kmull4 said:
You can nandroid from an ICS rom back to a GB rom, I did when I was on Calk's ICS rom to get a gps fix.. Although, there is a risk in bricking it, its up to you. Personally I'm on Venom's ICS rom and it is by far the most stable ICS leak I've used, and has great battery life as well.
Click to expand...
Click to collapse
Just flash the rom after format? Or Flash a new kernel? Cause my current kernel is stock but last time I flashed an ICS rom it gave me the annoy I1900 triangle boot up thing, is that going to be an issue?
Wipe cache,dalvik then format system and then wipe data. If going to ics rom make sure you are on a gb rom with CWM. Or I believe you can flash through odin, but definitely do some research.
Sent from my SPH-D710 using xda premium
I'm running Nocturnal Venum 1.2 and love the ROM Control with it. No themes yet, but still very nice.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also Mijjz Slim and Trim ROM is fast and great on battery.
Sent on Nocturnal Venum 1.2 using Tapatalk 2 Beta-5
killaphatboy said:
I'm running Nocturnal Venum 1.2 and love the ROM Control with it. No themes yet, but still very nice.
Also Mijjz Slim and Trim ROM is fast and great on battery.
Sent on Nocturnal Venum 1.2 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Last question on your pic of your about phone, your baseband is FD19, would I need to flash to that before trying that rom? or could I just wipe like you said and flash from EL29?
Read this threads first 4 posts first: http://forum.xda-developers.com/showthread.php?p=24733831
This ROM is AOKP 32 based and needs EL26 with CWM(found in first post on above thread). As for baseband, that is just the modem and any doesn't need to be flashed unless you want to try a different modem. To do so just Mobile Odin el26 with cwm wipe data/factory reset, wipe cache/dalvick, flash modem of your choice, rewipe cache/dalvick, flash rom, flash gapps and reboot to AOKP Goodness
Alright, here's my issue..
I'm really wanting to go to either Blu Kuban or Phantom's Blazer rom. Both of them look really amazing and they seem like they'd fit my style.
Now before anyone says, "Go read this, and that". I have read this and that over and over again.
I know the eMMC bug is out there and I don't want to end up with a bricked device from a stupid error. I know that I have to start by getting CWM installed; which is where I'm stuck. The rest sounds almost as easy as booting into recovery and flashing through CWM. But getting to CWM; that's the confusing part.
First, I want to rid myself of the chance of an eMMC brick as I've read there are patched kernels out there with CWM that nip that bug in the bud. But here's my issue. I've read so many posts and watched so many video's and still haven't came up with a positively right answer here.
I'm running sfhub's Odin oneclick for FF18 and it's rooted as of now. Other than that, it's stock basically.
Do I need to odin oneclick back to el29 to get to the blu kuban ff18 build? And if so, how do I go about installing CWM so I can? I've read GB kernels won't boot ICS and vice versa. So if I went to EL29, I'd have to flash to a ICS kernel with CWM? Haven't found out much about that honestly as every post that I've found via that pretty little search box is just ridden with warnings about the eMMC bug.
This is the closest thing I've came to find about installing CWM on FF18, but the thread (near the end pages) are ridden with people having issues getting that to run properly?
http://forum.xda-developers.com/showthread.php?t=1342728
I'm not a novice when it comes to electronics and hardware; just extra precaution is my goal. No brick = good LOL
So what's the best way for a Rooted FF18 install to go to CWM and be able to flash the ICS version of Blu Kuban or Blazer?
Thanks ahead of time as it's annoyed me for over a week now trying to find the right solution.
Just odin or if you have mobile Odin the touch wiz version here http://forum.xda-developers.com/showthread.php?p=28474639 and you should be good to go.
Sent from my SPH-D710 using Tapatalk 2
From ff18 you can just flash agat recovery and flash from that recovery. Recoveries that have been deemed safe won't brick your device. Or you can Odin the el26 kernel with cwm and boot into that recovery and flash from there. The last one was the standard method for flashing when safe recoveries weren't around. You can do this if you want to be extra careful. I got into the habit of flashing the el26 kernel before flashing any ICS ROM because I did it so much that it became "muscle memory".
Edit: in order to minimize the chance for error keep in mind flashing an el26 kernel from an ICS ROM will not allow your phone to boot. However you can still boot in cwm so after Odin finishes flashing the kernel be ready to hold the power button and the volume up key. If you miss your chance, no biggy just battery pull and try again. Try searching for a direct boot cwm kernel v3 I think. It does what the name implies.
Sent from my SPH-D710 using XDA
Alright, I used the autoroot package from sfhub here
http://forum.xda-developers.com/showthread.php?t=1342728
and chose option D for the ICS kernels and then chose the next option E which installed agat-cwm-src (the one which I've seen is "safe") lol Currently watching my phone do a nandroid backup!
Just to make sure though, it shows AGAT_Recovery tREC_v0.2.1 Does that sound right?
Vash403 said:
From ff18 you can just flash agat recovery and flash from that recovery. Recoveries that have been deemed safe won't brick your device. Or you can Odin the el26 kernel with cwm and boot into that recovery and flash from there. The last one was the standard method for flashing when safe recoveries weren't around. You can do this if you want to be extra careful. I got into the habit of flashing the el26 kernel before flashing any ICS ROM because I did it so much that it became "muscle memory".
Edit: in order to minimize the chance for error keep in mind flashing an el26 kernel from an ICS ROM will not allow your phone to boot. However you can still boot in cwm so after Odin finishes flashing the kernel be ready to hold the power button and the volume up key. If you miss your chance, no biggy just battery pull and try again. Try searching for a direct boot cwm kernel v3 I think. It does what the name implies.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Just to clarify, i flashed a rooted stock ICE FF18 rom to my phone recently with AGAT recovery v0.2.1, will i be able to flash Blazer rom with this recovery? Sorry if its a basic question im still trying to learn to ropes as well
thanks for all your input and help, reason why i love this site :good:
madwakisbak said:
Just to clarify, i flashed a rooted stock ICE FF18 rom to my phone recently with AGAT recovery v0.2.1, will i be able to flash Blazer rom with this recovery? Sorry if its a basic question im still trying to learn to ropes as well
thanks for all your input and help, reason why i love this site :good:
Click to expand...
Click to collapse
Yes you will be able to safely flash blazer rom with that kernel/recovery. Also when you flash that rom. Flash the kernel right after. To keep the safe recovery.
Sent from my SPH-D710 using XDA
On a side note, don't use any super wipe zips such as caulkulins format all from an ICS recovery it ignores any safeties that a recovery might have and you might brick. Just use the wipe options from the recovery.
Sent from my SPH-D710 using XDA
Ok i'm officially on blu kuban and i'm enjoying it fully. Love the dark theme and all the nooks and crannies. Question though.. Since I flashed using agats, do I need to rehash a safe kernel?
And on a side note, if I want to go back to stock I can just use an Odin one click correct?
Sent from my SPH-D710 using xda app-developers app
steddora said:
Ok i'm officially on blu kuban and i'm enjoying it fully. Love the dark theme and all the nooks and crannies. Question though.. Since I flashed using agats, do I need to rehash a safe kernel?
And on a side note, if I want to go back to stock I can just use an Odin one click correct?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
If you are on the blu kuban you can grab any kernel you want I'd recommend the kuban kernel in the rom updater.. But agats safe kernel is in the rom updater as well... And if you grab the kuban kernel in the rom updater it is safe as well since it is based off agats kernel just with more tweaks and what not
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Which one has the agats safe, and can I install it with the ROM updater?
Sent from my SPH-D710 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The ones shown in the screen shot are all safe(which you can install from the rom updater )
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
So if I flashed blu kuban, am I still on the kernel I started with or am I now on the blu kuban version since I flashed from agats recovery?
Sent by telekinesis!
steddora said:
So if I flashed blu kuban, am I still on the kernel I started with or am I now on the blu kuban version since I flashed from agats recovery?
Sent by telekinesis!
Click to expand...
Click to collapse
Doesn't matter what you started or flashed from.. When you flash the blu kuban, the kernel is installed by default "out the box".. Which is the first one shown in the screen shot
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Ash, so it overwrites the one I installed through the auto root and installed the blu kuban kernel and recovery? That's nice to know!
Sent by telekinesis!
steddora said:
Ash, so it overwrites the one I installed through the auto root and installed the blu kuban kernel and recovery? That's nice to know!
Sent by telekinesis!
Click to expand...
Click to collapse
Correct.. So no worries..
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
That's awesome to know! I am loving this room so far! Blows stock FF18 out of the water! Thanks again man!
Sent by telekinesis!
steddora said:
That's awesome to know! I am loving this room so far! Blows stock FF18 out of the water! Thanks again man!
Sent by telekinesis!
Click to expand...
Click to collapse
I been on it for two months now it's all great and it does!.. Make sure to drop on the thread if you ever have in questions or concerns.. A nice helpful group is on there
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
I didnt mine blu kuban ...but couldn't find settings to display any battery indicator on status bar... or the Clock time for that matter ..anyone know if that is a option on blu kuban
Also when I went to Rom updater after flashing ... I t did nothing but screen stayed blank and went to 1x
Sent from my SPH-D710 using xda app-developers app
I've found all of that in the ROM updater. I suggest reading into the ROM updater problem on the blu kuban post. I've not had any of those problems myself so i'm not sure. I love this ROM so far, and don't plan to change any time soon!
Sent by telekinesis!
Hi guys. I know this is probably a stupid question, but I would love to get a recovery on my phone. I'm coming from the evo3d which as super easy to work with. Right more I'm on fk23 I believe it's called through Odin. Really want to try cm10
Sent from my SPH-D710 using xda app-developers app
Get mobile odin and flash the el 26 kernel. Really simple
Before you boot cm 10 don't forget to flash an ics or gb modem first in the same time of flashing the Rom
Sent from my SPH-D710 using xda app-developers app
Best thing to to would be to read the stickies and how tos. And then read them again. Improperly rooting and addding a custom kernel (Recovery is part of the kernel on this phone!) can brick your device!
Not saying this to be a smart ass. Really it's that important; read the stickies, wikis and how tos. And once you've done that you will surely enjoy this phone.
Then read through the ROM OP you wish to put on your phone and read the the following posts - all of them.
You will save a whole lot of frustration and get 99% of your questions answered before you go and ask.
You don't quite say how you got to FK23 and what version - I assume you used PC Odin and via the One-Click Stock Rooted method. If that's the case you can, as the previous poster suggested get Mobile Odin (via playstore - my recommendation to support the dev, or go to the devs post and download the xda only app and kernel part there) and flash the EL26 CWM kernel that way. Or you could even use the One-Click Kernel method rwilco12 has them all here http://forum.xda-developers.com/showthread.php?t=1662295 or the 'Direct boot to safe recovery - CM team has info here http://e4gtcm.blogspot.com/p/cm9-install-guide.html
Either way, and espeically with Cyanogen builds follow the install directions - EXACTLY or you'll be making an expensive paperweight.
Good luck have fun.
FL16 Repack from agat
http://forum.xda-developers.com/showthread.php?p=36613042#post36613042
bigdaddy619 said:
FL16 Repack from agat
http://forum.xda-developers.com/showthread.php?p=36613042#post36613042
Click to expand...
Click to collapse
Cool, thanks for the quick replies guys! I saw a FK23 packed with AGAT recovery floating somewhere, my question was, if I flash that with Odin, is that firmware compatible with cm10? Or Miuiv4.1? Or any rom for that matter if it doesn't specifically say built on fk23?
And so only the ICS kernel will work on those roms, eventhough they are JB? I thought I read somewhere that modems and kernels werent backwards compatible. Appreciate the quick responses, I'm not a total noob I've flashed and rooted lot of other phones, just got these phones in the mail wednesday though.
DO NOT use the TW kernel repacks on CM builds. That is a brick waiting to happen.
Modems that is another story. JB modems are needed for JB TW builds but some have been able to use older ones, most notebly on the AOSP ROMs.
My best advice stands read through the OP of the ROM you are wishing to use then read through the entire followup posts. The CM team golks suggests EL29 direct boot or EL26 'safe recovery' and then using the kernel supplied by the ROM - CM10 kernel. The Miui also has the same explicit instructions. I'd heed them. But the choice is yours
search is your friend.
Thank you leaderbuilder, I almost bricked my wife's phone twice. I got it fixed, but I just asked in another thread on some advice on what to study up on & I click here & read your post. Heading off to the stickies am I. Thanks again.
Sent from my SPH-L900 using JellyBombed Tapatalk 2