Develop Bugs

[Q] Stock kernel (FC14) / Rogue kernel (FC07) for ICS

First of based off my post count you can tell that I am new to this so please be kind.
On the Blend ICS thread I have seen (can't post there yet, that's why I am posting here) several people state that it is best to run FC14 on the stock FC14 kernel, but that kernel does not include CWM so in order for me to update to a new ROM I would need to flash back (Odin) to a kernel that does include CWM. Please correct me if I'm wrong...
So, to get off of the stock kernel (no CWM) should I use the [KERNEL/RECOVERY][ICS] Rogue *Stock FC07* (New 3/10/12) kernel for this? Sorry if this is noobish, I only ask because in that thread it states:
Warning-
***DO NOT USE THIS RECOVERY TO FLASH ANY ROM***
Click to expand...
Click to collapse
so, I don't want to brick my phone and thought that I should ask before I use it.

Welcome!
You'll probably want to read over this thread as it should answer your questions about the brick concerns:
How Not To Brick Your E4GT

Thanks for the welcome, and also thanks for the response.
I guess my specific question is what are they (e.g. bigtoysrock) using as the kernel with CWM support when flashing using Odin so that they can flash a new ROM?

Canis-X said:
Thanks for the welcome, and also thanks for the response.
I guess my specific question is what are they (e.g. bigtoysrock) using as the kernel with CWM support when flashing using Odin so that they can flash a new ROM?
Click to expand...
Click to collapse
Got your PM. I use This FB21 tar to get recovery back. Personally I dont use the FC07 one, just cause I have the FB21 already.

Thanks so much for your response!
Cheers!
Sent from my Samsung 4G Touch using Tapatalk...

[ ROM ] Stock Rooted FC15 System [ ICS / OS 4.0.3 ]

This ROM is completely stock with exception that root/busybox is included and it uses the stock(No CWM) kernel.
All must be flashed through CWM, so flash the modem also in the same CWM session because once you reboot, you won't have CWM
Factory reset \ Data format is HIGHLY recommended(use FORMAT ALL attached before flashing)
Stock Rooted FC15 ROM (v1.0)
md5 - 1adc8261780551227590761b9b0eb55b
Stock Rooted De-odex'd FC15 ROM (v1.0)
md5 - 1a6c0a1c42357ee1aa923f84f3c7bdd6
FC15 Modem
md5 - d014800ca4e4a5b3f2342d7ee7895cfd
Make sure to give thanks to sextape for posting the tar of this build

You da man Calk, but you already knew that ;-)

Could we perhaps get the stock pulled kernel from this build, kind sir?

Thanks.
Was waiting for it.
Got the odexed rom done and running now but needed the deodexed version to theme.
I just don't know how you do it so fast.
Do you ever sleep/eat/take time off?
---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ----------
Reignzone said:
Could we perhaps get the stock pulled kernel from this build, kind sir?
Click to expand...
Click to collapse
Just get the zImage file out of rom zip.

Lol Calkulin you are the man I swear and an elite open source Linux coder thank you sir!!!
Edit: is it okay to run your bare rom converter with this rom?
Sent from my SPH-D710 using xda premium

Awesome ima download tonight!!

thank you so much Calk!!! cant wait for you to update your ICS rom

Here is a flashable of the stock FC15 Kernel

Awesome Calk!! I appreciate you always being on top of this for us!!
---
Bob Garon
http://bobgarontraining.com

dtm_stretch said:
Here is a flashable of the stock FC15 Kernel
Click to expand...
Click to collapse
With this one we still lose CWM right?
---
Bob Garon
http://bobgarontraining.com

I was waiting for this all day today! Thanks Calkulin!

alwaysbelieve1 said:
With this one we still lose CWM right?
---
Bob Garon
http://bobgarontraining.com
Click to expand...
Click to collapse
yes sir....

alwaysbelieve1 said:
With this one we still lose CWM right?
---
Bob Garon
http://bobgarontraining.com
Click to expand...
Click to collapse
nevermind lol

Calk, do you realize how happy you make all of these dudes?
Well, you do...in a very Epic4G-Touch-ie kinda way.
Thanks for all you do hermano.
Sent from my Modified with AWESOMENESS Epic 4G Touch.

good **** calk!!!

Good lookin' out for posting that kernel... much obliged!
Sent from my SPH-D710 using Xparent Cyan Tapatalk

Has anyone tried with fco7 repack cwm kernel?

digweed4me said:
Has anyone tried with fco7 repack cwm kernel?
Click to expand...
Click to collapse
I did.
Just flashed the rom with repacked kernel.
Phone is booting right now. Waiting to see if it worked.

agat63 said:
I did.
Just flashed the rom with repacked kernel.
Phone is booting right now. Waiting to see if it worked.
Click to expand...
Click to collapse
are u going to upload yours with aosp gallery , messaging etc and fco7 cwm?
and of course that theme

digweed4me said:
are u going to upload yours with aosp gallery , messaging etc and fco7 cwm?
and of course that theme
Click to expand...
Click to collapse
I'm not sure about aosp apps but once confirmed that FC07 works I'll start putting together a rom.

| MODEM | DISCONTINUED | FE16 Modem

This is just a little something I pulled from the latest update. It is the full FE16 modem.
Credits:
Sfhub for the Leak
Directions
Download Current Modem
Wipe cache and dalvik

Thank you sir!
ReActiveDisorder said:
This is just a little something I pulled from the latest update. It is the full fd26 modem.
Directions
Download Modem
Wipe cache and dalvik
Flash modem
Reboot and enjoy
Download-
http://www.4shared.com/zip/J3u02SY4/E4GT_Modem_FD26_ReActiveDisOrd.html
WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR DEVICE BY FLASHING THIS MOD.
Click to expand...
Click to collapse

I'm a little confused by the cwm in the thread title. I thought cwm was kernel related, not modem?
Oh wait, nevermind lol you're giving us a modem.zip to flash in cwm. I get it!
Thanks

Esoteric68 said:
I'm a little confused by the cwm in the thread title. I thought cwm was kernel related, not modem?
Click to expand...
Click to collapse
Its cwm flashable. Thats all i meant by it
Sent from my SPH-D710 using xda premium

ReActiveDisorder said:
Its cwm flashable. Thats all i meant by it
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yeah my addled brain finally added 2+2 and came out with 4.

Interesting. Just for practice or what? Learning to create cwm zips is on my list somewhere of things todo. Just wondering since of course there was already one posted. Ive seen a lot of you so have to figure this is nothing new to you.

ReActiveDisorder said:
This is just a little something I pulled from the latest update. It is the full fd26 modem.
Directions
Download Modem
Wipe cache and dalvik
Flash modem
Reboot and enjoy
Download-
http://www.4shared.com/zip/J3u02SY4/E4GT_Modem_FD26_ReActiveDisOrd.html
WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR DEVICE BY FLASHING THIS MOD.
Click to expand...
Click to collapse
deleted.....

ReActiveDisorder said:
... I pulled from the latest update. It is the full fd26 modem. .. .. WARNING: I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR DEVICE BY FLASHING THIS MOD.
Click to expand...
Click to collapse
This is odd.. the op says its a full FD26 modem.. what is that? Is their a partial modem floating around or something?
I'm wanting to see this partial "half" modem..
sj
Sent from my SGS2 Epic 4G Touch on AoKPm5 FD26 OS4.0.4 with dpi @ 128 using [email protected] 2 Pro

sjsharksfan420 said:
This is odd.. the op says its a full FD26 modem.. what is that? Is their a partial modem floating around or something?
I'm wanting to see this partial "half" modem..
sj
Sent from my SGS2 Epic 4G Touch on AoKPm5 FD26 OS4.0.4 with dpi @ 128 using [email protected] 2 Pro
Click to expand...
Click to collapse
Lmbo
and you don't typically have to wipe anything when flashing a modem, or at least that was what I gathered.
Sent from my SPH-D710 using xda premium

It's always been recommended to wipe cache/dalvik when flashing a modem.
Let's not be to harsh at the OP..... yeah the modems been around for a little while already but the dude is just trying to help out/contribute.

sjsharksfan420 said:
This is odd.. the op says its a full FD26 modem.. what is that? Is their a partial modem floating around or something?
I'm wanting to see this partial "half" modem..
Click to expand...
Click to collapse
We've had "patch" style modems in the past where you need to be on a certain modem version for the update to work. The initial EK02 modem that came with the OTA was like that, but Samsung got wise and now ships full modems with the OTAs as well.

ive always wondered this but never asked due to fear of being slapped for being stupid but....are gingerbread roms able to have any modem? like i can put any modem on any rom?

soccerboarder43 said:
ive always wondered this but never asked due to fear of being slapped for being stupid but....are gingerbread roms able to have any modem? like i can put any modem on any rom?
Click to expand...
Click to collapse
Yep........

The fd26 modem zip thats been available (at least the one I've found)was 4.82 mb.. this one is bigger(not by much) at 5.16 mb... not sure what the difference would be.. but it might be interesting to at least check it out before making a new developer in our community feel like crap... just sayin..
Sent from my SPH-D710 using xda premium

manufan721 said:
The fd26 modem zip thats been available (at least the one I've found)was 4.82 mb.. this one is bigger(not by much) at 5.16 mb... not sure what the difference would be.. but it might be interesting to at least check it out before making a new developer in our community feel like crap... just sayin..
Click to expand...
Click to collapse
You are looking at the compressed sizes. Compare the uncompressed sizes (around 15mb) and/or run an md5sum.

Full as opposed to a patch modem and yeah dalvik is a vm app cache not related to modem. Cant speak for primary cache in relation to the radio interface layer and such. But i never clear just for modem.

sfhub said:
You are looking at the compressed sizes. Compare the uncompressed sizes (around 15mb) and/or run an md5sum.
Click to expand...
Click to collapse
Damn, youre right sfhub.. both are the same uncompressed.. I did say that I didn't know if there was a difference or not.. just felt like people were being a bit harsh on him..
Sent from my SPH-D710 using xda premium

soccerboarder43 said:
ive always wondered this but never asked due to fear of being slapped for being stupid but....are gingerbread roms able to have any modem? like i can put any modem on any rom?
Click to expand...
Click to collapse
From what I understood, you can flash ics modem only with ics rom/kernel. Then again I'm not 100% sure

Alex1x said:
From what I understood, you can flash ics modem only with ics rom/kernel. Then again I'm not 100% sure
Click to expand...
Click to collapse
Naw.. you can flash whatever modem on whatever kernel you want, even on gb, I'm on 4. 0. 4 fd 24 kernel with el 29 modem right now
Sent from my SPH-D710 using xda premium

Give OP a break, he is starting to dev for us with his alpha ROM in the general section. I see some good new things coming our way from him soon...haven't been daring enough to test the rom but testers have been saying lots of good things so far.
Sent from my SPH-D710 using XDA

Changing Hitman Kernal

Hello everyone
I am trying to flash an ICS rom, and I am coming from the gingerbread Blazer 4.0 rom. Right now my recovery is Rogue CWM, which I guess is "hitman". While I have been trying to figure out how to flash ICS, I have read that I should not use hitman to flash ICS.
I was trying to change recovery but following the e4gtauto file, choosing option C, it gives a list of Bootimg's. For EL29, which is what I am on, it has option H. "install bootimg EL29+CW-Rogue" and I. "install bootimg EL29."
I am guessing choosing option H I would still be on Hitman? So I was hoping somebody could tell me how to flash the right recovery so I can flash ICS? I want to flash Super Galaxy ROM Stock V1.7.
Thank you!

Why not just use a sfhub one click to ics (the ff18 package)?
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

MiguelHogue said:
Why not just use a sfhub one click to ics (the ff18 package)?
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
I have no idea what that is lol. Can I use that to flash any ICS rom?

shahran said:
I have no idea what that is lol. Can I use that to flash any ICS rom?
Click to expand...
Click to collapse
Lol its like an auto root package that takes you to ICS.. And yes you can..
http://forum.xda-developers.com/showthread.php?t=1721229 (here is the link to the Ff18 one click)
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

MiguelHogue said:
Lol its like an auto root package that takes you to ICS.. And yes you can..
http://forum.xda-developers.com/showthread.php?t=1721229 (here is the link to the Ff18 one click)
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
I don't get how I would be able to flash the ICS rom I want using that? Wouldn't that just flash the stock Ff18?
BTW thank you for the help!

shahran said:
I don't get how I would be able to flash the ICS rom I want using that? Wouldn't that just flash the stock Ff18?
BTW thank you for the help!
Click to expand...
Click to collapse
Coming from GB, that's just the safe way for me to go from GB to ICS.. But yes that's stock FF18.. From there you would install your cwm as indicated in that post,follow the op of whatever rom u want to download And then flash your ics rom
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

MiguelHogue said:
Coming from GB, that's just the safe way for me to go from GB to ICS.. But yes that's stock FF18.. From there you would install your cwm as indicated in that post,follow the op of whatever rom u want to download And then flash your ics rom
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
Got it, downloading now Thank you.

MiguelHogue said:
Coming from GB, that's just the safe way for me to go from GB to ICS.. But yes that's stock FF18.. From there you would install your cwm as indicated in that post,follow the op of whatever rom u want to download And then flash your ics rom
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
So after following all of the directions, I am stuck in odin on "data.img," it has been about 15 minutes, wondering if should pull battery? Oy vey :crying:
More than 30 minutes now, AHHH!

Sorry to double post, but does anyone have a recommendation as to what I should do with it being stuck on "data.img?" Really need to fix it soon so I can make calls! Thanks.

shahran said:
Sorry to double post, but does anyone have a recommendation as to what I should do with it being stuck on "data.img?" Really need to fix it soon so I can make calls! Thanks.
Click to expand...
Click to collapse
Sorry I'm just seeing your post.. And hmmm yeah I would battery pull get back into odin mode.. Try different usb ports.. Different cables.. And don't move the phone while the install is happening
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

MiguelHogue said:
Sorry I'm just seeing your post.. And hmmm yeah I would battery pull get back into odin mode.. Try different usb ports.. Different cables.. And don't move the phone while the install is happening
- Sent From My Blu Kuban Themed Tapatalk Like A Boss
Click to expand...
Click to collapse
Pulled battery, switched USB port, on stock ICS now. Onto flashing cutom rom now :good:

shahran said:
Pulled battery, switched USB port, on stock ICS now. Onto flashing cutom rom now :good:
Click to expand...
Click to collapse
Good good I know the feeling of panic when it gets stuck.. Lol
Has happened to me many times
- Sent From My Blu Kuban Themed Tapatalk Like A Boss

Just a quick question for a Samsung noob

I was very proficient at flashing custom ROMs onto my old HTC One V, but this past weekend I got a Virgin Mobile Galaxy S2, updated it via the Samsung official downloader to JB 4.2.1 (GB28) immediately. then, I downloaded the Framaroot apk onto my phone via play store and rooted with the Aragon hack. SuperSU is on my phone.
So, I've been reading and reading and READING in order to make SURE that I understand the process involved with customizing my new S2. Here is what I want on my phone: http://forum.xda-developers.com/showthread.php?t=2051513 (Paranoid Android) and in the instructions it says that I simply need this: http://forum.xda-developers.com/showthread.php?p=26295021
So, since I currently have GB28 and it is a Virgin Mobile phone, all I need to do is download this?
JB - Virgin Stock/Touch-Wiz Kernels
Available Kernels (ZIP Format): GB28 (Virgin) / FL14 (Virgin)
Available Kernels (TAR.MD5 Format): GB28 (Virgin) / FL14 (Virgin) <---and this one I can install using Mobile Odin, right?
Available Kernels (One-Click Format): GB28 (Virgin) / FL14 (Virgin)
And that will put CWM on my phone and I can then flash PA from recovery as I'm accustomed to? Nothing else? No need to worry about the stock modem?
I really appreciate the help!

No, those are stock kernels. You already have that on your phone. You need to flash a custom kernel. I recommend chris41g's el26. Flash the tar with pc or mobile odin, reboot to recovery, wipe everything, flash rom, ics modem(if needed), reboot, profit.
Sent from my SPH-D710 using xda premium

Yes an ICS modem is needed, that's the only thing I couldn't tell her in the other thread, I don't know what VM uses for the ICS modem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
Yes an ICS modem is needed, that's the only thing I couldn't tell her in the other thread, I don't know what VM uses for the ICS modem.
Click to expand...
Click to collapse
Any ics modem will work for VM. It's the same principle as the GB27 modem working on my Boost phone. But I think the rom is a ctually FL26, but not sure there's a stand alone modem, which came out at the same time as Sprints FL24. But FL24 modem should work just fine. It works on Boost, no reason it shouldn't work on VM.
Sent from my SPH-D710 using xda premium

You are currently rooted - next step is custom recovery.
Download EL26+CWM tar from the repo (check the stickies)
Download FL24 modem zip, also from the repo
Download the AOSP rom of your choosing (ParanoidAndroid it looks like)
Download whatever gapps you want to use
-------------------------------------------------------------------------------------------------------------
Mobile Odin -> EL26+CWM.tar.md5
Pull battery when you see the Galaxy S2 logo.
Reboot to recovery by holding Volume Up and Power
Make a nandroid
Wipe Data, Cache, and Dalvik-Cache
Flash FL24 modem zip
Flash ROM
Flash Gapps
Reboot system

Adreaver said:
You are currently rooted - next step is custom recovery.
Download EL26+CWM tar from the repo (check the stickies)
Download FL24 modem zip, also from the repo
Download the AOSP rom of your choosing (ParanoidAndroid it looks like)
Download whatever gapps you want to use
-------------------------------------------------------------------------------------------------------------
Mobile Odin -> EL26+CWM.tar.md5
Pull battery when you see the Galaxy S2 logo.
Reboot to recovery by holding Volume Up and Power
Make a nandroid
Wipe Data, Cache, and Dalvik-Cache
Flash FL24 modem zip
Flash ROM
Flash Gapps
Reboot system
Click to expand...
Click to collapse
Thanks for the walk thru!

So, the Gingerbread kernel (Chris41g's repacked GB EL26+CWM5) is one that works with AOSP ROMs properly? Up to date, there has been no ICS or even JB repacked with CWM or TWRP that works with AOSP ROMs?
Referencing:
Recommended Kernel for Flashing in ICS (due to EMMC Bug)
GB - Stock EL26 Repacked Kernel (TAR.MD5 Format) (One-Click.EXE Format) *Thanks to chris41g!
Developer Thread/Site: http://forum.xda-developers.com/show....php?t=1416056
Notes: This is the recommended kernel for flashing. Kernel is GB based and will not work as a daily kernel on ICS.
Available Kernels (TAR.MD5 Format): EL26
Available Kernels (One-Click Format): EL26

zombiegirl2010 said:
So, the Gingerbread kernel (Chris41g's repacked GB EL26+CWM5) is one that works with AOSP ROMs properly? Up to date, there has been no ICS or even JB repacked with CWM or TWRP that works with AOSP ROMs?
Referencing:
Recommended Kernel for Flashing in ICS (due to EMMC Bug)
GB - Stock EL26 Repacked Kernel (TAR.MD5 Format) (One-Click.EXE Format) *Thanks to chris41g!
Developer Thread/Site: http://forum.xda-developers.com/show....php?t=1416056
Notes: This is the recommended kernel for flashing. Kernel is GB based and will not work as a daily kernel on ICS.
Available Kernels (TAR.MD5 Format): EL26
Available Kernels (One-Click Format): EL26
Click to expand...
Click to collapse
ICS repacks have the super brick bug. Generally anything with the word brick in the title is to be avoided.
Jb repacks and source built kernels for touch wiz work great as long as you stay on touch wiz. They sometimes have issues flashing aosp ROMs.
El26+cwm is the only kernel i am aware of that can flash anything, from any setup, with no issues.
Edit: you get a new kernel when flashing the ROM anyways. El26 is only to get you from tw to aosp.
Sent from my Epic 4g Touch on PACman

Adreaver said:
ICS repacks have the super brick bug. Generally anything with the word brick in the title is to be avoided.
Jb repacks and source built kernels for touch wiz work great as long as you stay on touch wiz. They sometimes have issues flashing aosp ROMs.
El26+cwm is the only kernel i am aware of that can flash anything, from any setup, with no issues.
Edit: you get a new kernel when flashing the ROM anyways. El26 is only to get you from tw to aosp.
Sent from my Epic 4g Touch on PACman
Click to expand...
Click to collapse
Oh! That makes sense now! Thank you guys so much! I'm feeling a lot better about this!
Oh, and I also noticed that Paranoid Android really isn't being updated anymore, so I've decided on PACman. Which version is the most stable right now? The latest Nightly or the most recent release?

zombiegirl2010 said:
Oh! That makes sense now! Thank you guys so much! I'm feeling a lot better about this!
Oh, and I also noticed that Paranoid Android really isn't being updated anymore, so I've decided on PACman. Which version is the most stable right now? The latest Nightly or the most recent release?
Click to expand...
Click to collapse
Latest build according to sniper's OP is v23.0.0. And from all accounts it runs smooth like butter, so go with that. You'll need to follow the OP, get Gapps, etc....good luck and enjoy flashing!
Sent from my SPH-D710 using xda premium

jdsingle76 said:
Latest build according to sniper's OP is v23.0.0. And from all accounts it runs smooth like butter, so go with that. You'll need to follow the OP, get Gapps, etc....good luck and enjoy flashing!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks!

zombiegirl2010 said:
Thanks!
Click to expand...
Click to collapse
I have successfully flashed PACman v23! Thank you guys SO MUCH!
Is the reason that it says that I have Sprint instead of Virgin Mobile, because the FL24 modem is a Sprint one?

zombiegirl2010 said:
I have successfully flashed PACman v23! Thank you guys SO MUCH!
Is the reason that it says that I have Sprint instead of Virgin Mobile, because the FL24 modem is a Sprint one?
Click to expand...
Click to collapse
That is correct...FL24 is a Sprint Modem...but you should be getting data, wifi, etc, just fine, correct?
Sent from my SPH-D710 using xda premium

Its all ok. Its because its a sprint rom. It wont hurt a thing. If you dont have 3g just search virginmobile ics modem and download (as a. Zip) and flash in recovery: D
▶▶Sent From My Epic Touch 4G running android 4.2.2!◀◀

HackingHacker said:
Its all ok. Its because its a sprint rom. It wont hurt a thing. If you dont have 3g just search virginmobile ics modem and download (as a. Zip) and flash in recovery: D
▶▶Sent From My Epic Touch 4G running android 4.2.2!◀◀
Click to expand...
Click to collapse
That is not entirely correct. Unlike jelly bean, ics modems were not released as carrier specific(see link). FL24 is the latest ics modem for Sprint, Boost, VM, etc...
http://forum.xda-developers.com/showthread.php?t=1764210
Sent from my SPH-D710 using xda premium

jdsingle76 said:
That is correct...FL24 is a Sprint Modem...but you should be getting data, wifi, etc, just fine, correct?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ah ok! Yes, it seems just fine so far.
I just checked my PRL and it is the same as it was on TW Stock. So, all seems okay.

zombiegirl2010 said:
Ah ok! Yes, it seems just fine so far.
I just checked my PRL and it is the same as it was on TW Stock. So, all seems okay.
Click to expand...
Click to collapse
When you flash a new modem, it never hurts to update prl and profile. Not sure if that option is available in PACman, but something to keep in mind regardless. Glad it's working for you. Have fun!
Sent from my SPH-D710 using xda premium

jdsingle76 said:
When you flash a new modem, it never hurts to update prl and profile. Not sure if that option is available in PACman, but something to keep in mind regardless. Glad it's working for you. Have fun!
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Ah ok, thanks!
hey, apps that require superuser access are taking FOREVER to get permission. Did I lose root? What should I do to fix that? I installed SuperSU to see if that will fix, but it keeps trying to install binary and isn't successful.
wait...I may have something. Let me see...
nope...same deal.

I had rooted with Framaroot. I'm trying to reinstall it to reroot, but it won't let me click "install"...only "cancel".

zombiegirl2010 said:
I had rooted with Framaroot. I'm trying to reinstall it to reroot, but it won't let me click "install"...only "cancel".
Click to expand...
Click to collapse
Install root checker from the play store
Sent from my SPH-D710 using xda premium