Cannot find a solution to my problem, so finally throwing in the towel. If this is not posted in the right section, please let me know.
I have a US cellular SCH-R760. Was having issues with it (ended up just being bad battery) and decided to start trying custom roms so I could upgrade to JB. Obviously isn't available yet for the USC version, so using the E4GT roms. I am currently running Slim Bean and love it. Have also tried Jellybam and Wild for the Night, and have had the same issue on every one: speakerphone not working at all. The speaker itself works fine for media, but if I try to put a call on speakerphone, I get absolutely nothing. Same for phone Bluetooth audio. Media Bluetooth works fine, but nothing for the phone.
Sent from my SCH-R760 using xda app-developers app
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Actually, there is a US Cellular page where, as I read earlier on these forums, they port E4GT roms all the time. You should fine your device there.
Link - http://teamuscellular.com/
Related
I've installed latest 4r1 beta and see that many people in rom thread have wi-fi working via setting static ip against dhcp, but my phone can't even see any wi-fi networks. Other roms work well and just updated to Vision_Radio_12.62.60.27_26.13.04.19 but still no wi-fi. I wonder if anyone can help or atleast post this question to main thread as im new member and can't post in ad development topics.
Send the op of ROM thread a private message if you can't post in said thread.
Sent from my HTC Vision using xda premium
hi
I have the same problem with ICS Android 4.0.3
I found that nexus S handheld users had the same problem
visit here
http://forum.xda-developers.com/showthread.php?t=1400363
I tried to use their patch on my HTC HD2 but it doesn't work
the problem is very serious
visit here too
http://www.google.com/support/forum/p/Google+Mobile/thread?tid=24e8cc08903e706a&hl=en
Hi, I have the same problem. Available networks are not appear when turning on wifi. I am currently on ICS_AOSP_Vision_beta8r5 (BTW great rom).
I hope devs will help us with this issue.
I'm not running an ICS ROM at the moment, but I had the same problem and figured it out. If I remember correctly, at the top of the list (above the list of networks) there's a toggle you need to switch on. It wasn't obvious, just happened to find it by accident. Check it out.
I am seemimgly having an issue wit wifi tether. After a period of time it seems to time and and drops all connections. I hear them reconnect (vibrate) and then moments later they are not connect. It happens with the touchpad so i decided to try an incredible and had the same issue. any help would be greatly appreciated.
Tim
First of all this is the Galaxy Nexus subforum. Your post is regarding HP Touchpads and HTC Droid Incredibles. Try posting in those areas.
Second, this is the development subforum. It is a place for posting ROMs and kernels that you developed. This post is more suited for the general subforum (in the Incredible or Touchpad area).
Finally, get the latest version of wifi tether from here http://code.google.com/p/android-wifi-tether/ and make sure you use the settings to set the correct profile.
Are there 3g touchpads that you can use wifi tether with?
I believe the problem is with the nexus since that is what i am running wifi tether on. So i believe this is in the correct forum unless this is just for roms and kernals. I thought sine this it's part of the development of the device i would have the correct form. I used the incredible and touchpads as examples of what i tried to connect with.
Moved to Q&A
Wifi tether isn't working for me? I tried beta 9 & beta 10 and no computers see the wireless network. I even tried to manually add it and no luck. Also my phone keeps rebooting after 10 mins or so after I launch the app?
Anyone else having similar problems or have any suggestions?
Sent from my Galaxy Nexus using Tapatalk
I changed the channel to 2 from 1 and it has been working great. Channel 6 didnt work for me.
Hey guys, tried to do my reading and research before making a thread - so I hope this isn't answered somewhere obvious but if so I apologize beforehand.
I have a Galaxy S3 i747 on Telus Mobility in Alberta, Canada. I was an affluent iPhone junkie, but this was my first foray into Android. Love it. I successfully rooted the stock firmware, got clockwork installed and then decided I wanted to move into a custom rom.
I got the 11/27 Nightly installed no problems and had no issues. Upon updating to the 12/27, everything went smoothly except I couldn't get 4G connectivity at home. I usually can have 4G at home, no questions asked. Upon updating, back to 3G only.
Checked APN Settings
Ensured Preferred network
Enabled Mobile Data
I went to a city about an hour away and intermittently, the phone grabbed 4G. It would switch over, let me connect at full speed then switch back to 3G. Upon returning home, back to 3G. Again, normally I NEVER see 3G, always atleast 4, then LTE when I go to Edmonton.
Anyone have any ideas?? Love CMOD and don't really wanna flash back to stock.
Thanks guys, this place is a wealth of information and a joy to read.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Any ideas?
Im sure this has been out there somewhere but i have been unable to find something, Im running NexusEvolution 3.0.0 ROM and just upgraded my radio to FF02/FG02. problem is i keep dropping calls, have even before upgrading thats why i upgraded in hopes to fix it. Any ideas what is going on? this is seriously driving me crazy. doesnt matter where i am or who im talking to. When it happens i will look at the signal and its usually down to 1/2 grey bars ( no 3g/4g) or no bars at all then it will jump back up. Please help me figure this out. Thanks.
flash a different radio.
This is the second one what other one would i flash, should be the most up to date one i thought.
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Don't tamper with the radio then.
Re-flash the original radio and then go to your dialer and type *#*#4636#*#*.
Go to Phone Information and change the type of signal to whatever you enjoy.
GSM = WCDMA only
CDMA = LTE Only or w.e
Hello all, I am new to the GS3 but not the Galaxy line i have had the Captivate Infuse, S2 Skyrocket before this one. I spent a good 95% of the time on Cyanogen Mod on all but the Infuse.
I have a question about Bluetooth and connecting automatically, I know on CM9 and 10 (i cant remember before then) when you turn BT on it automatically connects to what ever device you are paired that is in range. Is there not a way to make that work with the stock 4.1.1 ROM?
There are a few features that the TW 4.1.1 has that i am getting really used to and i really did not want to go to CM just yet. but this one issue might very well me the deal breaker for me.
I am running DLK3 and the only mod other than rooted is the Google wallet unlocker and 23 toggles (also on the 23 toggle it does not pop up with a list of paired devices like it does with the stock toggle, but if it will just connect then i really don't care to see the list)
any help would be awesome, i have done some searching but most of what i found was about audio quality streaming a car stereo.
Questions and help issues go in Q&A
Thread moved
FNM
Well once I got home from work I did a little more searching and found an app that fixes my issue. Not really the way I wanted to fix it but it seems to be working.
Sent from my Nexus 7 using Tapatalk HD