I am using the new Oxygen JB 4.2.2 rom based on CM10.1 My problem is that I can't get GPS working. Any suggestions as to what I can do to fix that. Also will flashing the matching RIL for the RADIO I am using is that recommended on a CM 10.1 rom or not? Will it do any harm if I do flash the matching RIL?
heywheelie said:
I am using the new Oxygen JB 4.2.2 rom based on CM10.1 My problem is that I can't get GPS working. Any suggestions as to what I can do to fix that. Also will flashing the matching RIL for the RADIO I am using is that recommended on a CM 10.1 rom or not? Will it do any harm if I do flash the matching RIL?
Click to expand...
Click to collapse
RILs are only for pre-GB Sense ROMs.
ok thanks
Related
Recommended AOSP Ril for the latest radio? If I flash the current ril for the latest radio on MIUI, I lose all my signals and cant even make a phone call. can anyone suggest me a ril to go along well with the latest radio?
thanks!
my radio/ril info is in my sig.
P00t said:
Recommended AOSP Ril for the latest radio? If I flash the current ril for the latest radio on MIUI, I lose all my signals and cant even make a phone call. can anyone suggest me a ril to go along well with the latest radio?
thanks!
my radio/ril info is in my sig.
Click to expand...
Click to collapse
2.2.0018G works fine here on SCI MIUI with that radio, 2.2.1003G worked alright as well on BlackIce (seemed to drain a little more but I was changing a lot of settings at the time so odds are it wasn't anything to do with the RIL at all).
I never bother changing the RIL from whatever comes with the ROM if I'm on an AOSP base; seems to be largely a waste of time. Unless there's some terrible problem after you flash a new radio which could only possibly be solved by using a different set of interface layer files, just leave them be.
//sent from my Desire HD using Tapatalk; all errors entirely intentional.
Hi Everyone,
I'm a bit confused with RIL files and i would like to have some clarifications.
From what i am reading on sense roms needs to be flashed with RILs which i get. I currently have Radio 12.56.60.25U_26.10.04.03_M and i flash the Ril 12.56.60.25U_26.10.04.03_M when i'm using this ROM DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00. Ok, so for AOSP/AOKP/MIUI Roms i shouldn't need to install andy RILs correct? Just install the ROM and go, right? Also if i do want to try out Sabsa Prime v8.5 is there a new set of Rils that i need to use or do i use the Ril i was using before?
For people who have different brand phones other than HTC is there a Ril alternate that needs to be installed to match the radio or is it flash ROM and go?
Many thanks everyone. This have been stopping me from trialing out different Roms except for modified sense gingerbread roms like ARHD.
dragon884 said:
Hi Everyone,
I'm a bit confused with RIL files and i would like to have some clarifications.
From what i am reading on sense roms needs to be flashed with RILs which i get. I currently have Radio 12.56.60.25U_26.10.04.03_M and i flash the Ril 12.56.60.25U_26.10.04.03_M when i'm using this ROM DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00. Ok, so for AOSP/AOKP/MIUI Roms i shouldn't need to install andy RILs correct? Just install the ROM and go, right? Also if i do want to try out Sabsa Prime v8.5 is there a new set of Rils that i need to use or do i use the Ril i was using before?
For people who have different brand phones other than HTC is there a Ril alternate that needs to be installed to match the radio or is it flash ROM and go?
Many thanks everyone. This have been stopping me from trialing out different Roms except for modified sense gingerbread roms like ARHD.
Click to expand...
Click to collapse
Only use RILs on ROMs that are both Sense and pre-ICS. For all other ROMs (like Sabsa Prime, which is ICS) you just flash the ROM and you're good.
bananagranola said:
Only use RILs on ROMs that are both Sense and pre-ICS. For all other ROMs (like Sabsa Prime, which is ICS) you just flash the ROM and you're good.
Click to expand...
Click to collapse
Just to make it a little more understandable:
Every Rom needs a RIL;
But in many Custom Roms the Devs already build in the RILs;
The RIL must correspond with your Radio; if it doesnt, you will end up with no Reception;
See the quote below and the the related Thread for more detailed Information.
I just followed the discussion some days ago, cause I wanted to update My Desire HD to the latest Radio, and didn't wanted to brick my phone.
It's always better to understand why things behave like they do, instead of follow some instruction without being aware whats happening.
ShadowPony said:
I don't entirely agree with your statements.
EVERY ROM comes with a RIL. Period. No exception, otherwise the radio doesn't work.
For AOSP ROMs there is a RIL, but have not seen it apart from ROM.
With Sense everything gets weirder because HTC released a new RIL for almost any combination of Sense with OS (at least until ICS, where old RILs no longer function properly)
even with any sense ROM, you can only flash the baseband (radio), and if you have reception problems, then also go for the RIL
also, the latest radio with RIL is: 12.69.60.29_26.17.14.11_M
http://forum.xda-developers.com/showthread.php?p=30564790#post30564790 (this thread)
@o4kareg, GetRIL reports matching baseband/RIL for me with 12.69.60.29_26.17.14.11_M and the corresponding RIL
Click to expand...
Click to collapse
Greetings from Cologne
unbeteiligter
I use Sabsa Prime 8.5 on radio 12.65.60.29U_26.14.04.28_M without flashing any RIL. GPS and Phone works brilliant!
hardsoft said:
I use Sabsa Prime 8.5 on radio 12.65.60.29U_26.14.04.28_M without flashing any RIL. GPS and Phone works brilliant!
Click to expand...
Click to collapse
Right!!
your Rom has the RIL included...
my DHD runs on radio 12.69a.60.29U_26.17.14.11_M also without extra installing RIL...
cause it's included in my ROM by the Dev.
unbeteiligter said:
Right!!
your Rom has the RIL included...
my DHD runs on radio 12.69a.60.29U_26.17.14.11_M also without extra installing RIL...
cause it's included in my ROM by the Dev.
Click to expand...
Click to collapse
So if i don't want to update my radio what RIL should i use for my version? will the gingerbread Ril be used? and how about AOSP roms? I had be experiences updating the radio before. i've update radio + matching RIL and my phone cannot hold a call connection longer than 10mins.
dragon884 said:
So if i don't want to update my radio what RIL should i use for my version? will the gingerbread Ril be used? and how about AOSP roms? I had be experiences updating the radio before. i've update radio + matching RIL and my phone cannot hold a call connection longer than 10mins.
Click to expand...
Click to collapse
Unless you have a GB Sense ROM, just use the RIL that came with the ROM.
Accelerometer, Orientation Sensor and GPS these things are not working on Jellybean ROMs in my Desire HD. I have searched for it and found a solution Flashing JB ROM after flashing a Stock ROM but it doesn't work for me and is it a radio problem ? and its working fine with ViperDHD 1.2.3, Is any one working on those fix ? and i found it all because of Firmware incompatibility. and Tried this putting my DHD in Fastboot mode and Erase "Userdata"
Erase "system"
Erase "Cache"
and reflashed Unofficial AOKP but still they are not working. Any other ideas to make it work. any help regarding this will appreciated like radio recommendation, ROM recommendation..
Thanks in advance.
- Haeriz Titan -
ViperDHD De-Sensed (NOVA Prime)
Haeriz said:
Any other ideas to make it work. any help regarding this will appreciated like radio recommendation, ROM recommendation..
Click to expand...
Click to collapse
I use 4.2.1 CyanogenMod 10.1 M-Series by Mustaavalkosta and everything works. I recommend.
I think it is more stable than the Cyanogenmod 10.1 by PipelinerArd.
Did you flash a RUU like this thread states:
http://forum.xda-developers.com/showthread.php?t=1970972?
Trying
i have flashed the stock ROM but not as per the thread, trying it now.
I found the radio included in 4.2.1 worked the best for me, but the OS itself was slow and buggy. Can I flash the 4.2.1 or 4.2.2 radios on my otherwise stock Gnex running 4.1.2 without issue??
Should be OK, so long as you have the right RIL as well
EddyOS said:
Should be OK, so long as you have the right RIL as well
Click to expand...
Click to collapse
How can I check if I have the right one? Is that part of the OS included in the radio.img or is it part of the system???
It's part of the system. Basically, once you've done it get GetRIL from the Play Store and see what it says or download the correct RIL from the RIL thread in Development
hello
i tried many custom roms but none of them had a working wifi, cm 10 10.1 10.2 aosp. wifi doesn't work on any rom that i've tried by far so i'm thinking about trying cm9 can anyone please confirm that they're using wifi successfully with the rom? can u tell me about any rom u've tried that has working wifi?
thanks
monrokhoury said:
hello
i tried many custom roms but none of them had a working wifi, cm 10 10.1 10.2 aosp. wifi doesn't work on any rom that i've tried by far so i'm thinking about trying cm9 can anyone please confirm that they're using wifi successfully with the rom? can u tell me about any rom u've tried that has working wifi?
thanks
Click to expand...
Click to collapse
Are you sure to have a compatible firmware installed? Every CM i tried had working WiFi. I'd suggest CM11 mod called Mokee OS version 03/30 + using KhaN Kernel v. 1.9. If your phone isnt broken, WiFi will work.