[Q] Sd card issue (CM 10) - Samsung Galaxy W I8150

Hello folks,
Recently I have flashed CM 10 via CWM 6.0.3.2 on my Samsung Galaxy W. (I followed this procedure: http://forum.xda-developers.com/showthread.php?t=1990795)
Everything worked out fine (yay) exept for two issues I have:
1. My SGW doesn't recognize my Sd card (internal) at all. (though internal is mounted in cwm menu)
I have several folders regarding my sd and external sd:
- sdcard> tells me it is "unplugged" (in German> translation might differ) when I enter via file manager
- mnt/sdcard> here it tells me my sd card is unplugged as always
- storage/sdcard0> unplugged
- external_sd> it tells me sd card unplugged if I enter
- mnt/external_sd >here I can enter all of my folders
- storage/sdcard1> here I can enter again
2. My SGW can't mount my external sd anymore. I can clearly enter my external sd's files, but apparently I cannot mount my PC. Especially not with Multimount because it requests me to mount my internal sd (issue 1).
So how do I get it to work properly? - is it possible to do it via Terminal Emulator?
Specifications:
- Samsung Galaxy W
- Android Version 4.1.2.
- Kernel Version: 3.0.80-cyanogenmod-gc689589
[email protected] #1
- Cyanogenmod Version: 10-20130605- UNOFFICIAL-ancora
Thanks a lot in advance

Hi, I have similar issues with internal storage after flashing to 4.2.2 and also 4.1.2. Model is galaxy W previously 2.3.6 stock.
At root, i have
/data, which seems to be my internal storage as the FX file explorer show it has a storage of 1.07gb
/external_sd, which contains my files in micro sd card
/sdcard, which ES say SDCard unmounted
/storage, which contains sdcard0 (SDCard unmounted), sdcard1 (micro sd), usbdisk (SDCard unmounted)
In the andriod settings > storage, I can see internal storage with total space 1.07gb, but unable to mount it.
My camera and gallery says "No external storage available".
What should I do? Please help

Have You Try To Change Your Rom?!

ElGzzar said:
Have You Try To Change Your Rom?!
Click to expand...
Click to collapse
Hi, yes actually i did. I've tried 4.2.2, 4.1.2, then 4.0.4. All gave me the same problem.

lennnostra said:
Hi, yes actually i did. I've tried 4.2.2, 4.1.2, then 4.0.4. All gave me the same problem.
Click to expand...
Click to collapse
Try To Format Your SD On Your PC With FAT32 Mod?!
Then Try 10.1 (4.2.2) Rom
Done :good:

ElGzzar said:
Try To Format Your SD On Your PC With FAT32 Mod?!
Then Try 10.1 (4.2.2) Rom
Done :good:
Click to expand...
Click to collapse
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.

honeyx said:
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.
Click to expand...
Click to collapse
If The Internal Is The Problem Then You Must Back To The Main Software 2.x.x
Then Back To The Edited Mods And Rom's
The Internal Storage Will Work
...............................
When That Happen To Me ... That What I Have Done
Sorry For Bad English
Over :good:

ElGzzar said:
If The Internal Is The Problem Then You Must Back To The Main Software 2.x.x
Then Back To The Edited Mods And Rom's
The Internal Storage Will Work
...............................
When That Happen To Me ... That What I Have Done
Sorry For Bad English
Over :good:
Click to expand...
Click to collapse
You probably mean back to stock Samsung ROM. But how will this fix corrupted partitions? And why "must" if there are probably more simple ways to fix it rather than flashing roms forth and back?
First of all he should format both and switch to Mass Storage mode to see if this fixes his issue. Flashing ROMs still can be tryied as a last resort.

honeyx said:
You probably mean back to stock Samsung ROM. But how will this fix corrupted partitions? And why "must" if there are probably more simple ways to fix it rather than flashing roms forth and back?
First of all he should format both and switch to Mass Storage mode to see if this fixes his issue. Flashing ROMs still can be tryied as a last resort.
Click to expand...
Click to collapse
Yeah I Mean (back to stock Samsung ROM) And That This Makes The Phone Due To His Condition Also Came From Its Supplier ..
And That's Fix All Internal Storage Problem's .... By Format The Internal Storage With Force From stock Samsung ROM ...
And I Think He Can't access The Internal Storage To Format It By Him Self ...
I Have Tried That Problem Whin I Have Got My Mobile New .. I Haven't Found Solve For It , So I Have Back To The stock Samsung ROM
..
And Found Every Thing Work Fine Then I Have Back To CM Mod Again... :victory:
If You Have Another Simple Way For That Problem Tell Him ,Please ...
Over :good:

ElGzzar said:
Yeah I Mean (back to stock Samsung ROM) And That This Makes The Phone Due To His Condition Also Came From Its Supplier ..
And That's Fix All Internal Storage Problem's .... By Format The Internal Storage With Force From stock Samsung ROM ...
And I Think He Can't access The Internal Storage To Format It By Him Self ...
I Have Tried That Problem Whin I Have Got My Mobile New .. I Haven't Found Solve For It , So I Have Back To The stock Samsung ROM
..
And Found Every Thing Work Fine Then I Have Back To CM Mod Again... :victory:
If You Have Another Simple Way For That Problem Tell Him ,Please ...
Over :good:
Click to expand...
Click to collapse
I think you are mixing something up. First of all he didn´t say he can´t mount / access it from CWM Recovery but from a running ROM. This is two different things so it still should be possible to access both in CWM Recovery and to do a format.
Secound. Flashing a ROM will not format the internal Storage but only the partition where the ROM will be flashed to. They are not the same, so this is also two different things. So even if you flash a ROM but are having corrupted SDcards (Internal and external) they will stay corrupted till you fix this.
And this is why I suggested to first boot into RECOVERY, format both and finally after rebooting change to Mass Storage as the MTP Mode is not always working very well. If this doesn´t help he still can flash back to stock ROM.
However now I´m just repeating what I already said before. If you can´t get it, then I´m sorry for you.

honeyx said:
I think you are mixing something up. First of all he didn´t say he can´t mount / access it from CWM Recovery but from a running ROM. This is two different things so it still should be possible to access both in CWM Recovery and to do a format.
Secound. Flashing a ROM will not format the internal Storage but only the partition where the ROM will be flashed to. They are not the same, so this is also two different things. So even if you flash a ROM but are having corrupted SDcards (Internal and external) they will stay corrupted till you fix this.
And this is why I suggested to first boot into RECOVERY, format both and finally after rebooting change to Mass Storage as the MTP Mode is not always working very well. If this doesn´t help he still can flash back to stock ROM.
However now I´m just repeating what I already said before. If you can´t get it, then I´m sorry for you.
Click to expand...
Click to collapse
Yeah Yeah I See Now Thank's For Teaching Me .. :victory:
And I'm Sorry That is My Missd
Sorry For Bad English ToO ..
Over XD

Thanks
honeyx said:
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.
Click to expand...
Click to collapse
Thanks man,
your knowledge regarding this issue immediately solved my problem. My girlfriend's very happy now
Maybe I ll get lucky tonight Just kidding, I get lucky whenever I want
Greetings,
Max

Related

[Q] HTC Desire unable to mount SD card

Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.

problem in mounting /dev/block/mmcblk0p1(or /dev/block/mmcblk0)

well i would like to know about the issue and a detailed description how to get out of it ... as i m not familier with partitions and all in motorola defy as well as how to fix it ..
wht i did was i installd shadows 2.3.4 rom and then tried to revert back to original one with full flash with 2.59 eclair rom. everything went well and fine until .... in eclair i tried to backup the current rom. while entering into recovery its showing
cant mount /dev/block/mmcblk0p1 or (/dev/block/mmcblk0) (No such file or directory)
can someone tell me in a detailed way cause i havent worked with gparted or something like tht to fix the partitions of motorola defy in this manner..
how to proceed in this to fix this problem so that i can use cwm again to install roms and all ?
please help !!!!!!!!!!!!!!!!!
Did sdcard work within Android eclair?
Try to reformat your SDCard using windows. (fat32)
(Backup your card)
okay i formatted ... now shall i reformat it via the phone again ? or should i go directly to the cmw ???
Edit : i formatted sdcard via windows . and opened bootmenu to backup .. yet the problem is persisting !!
joydeep1985 said:
okay i formatted ... now shall i reformat it via the phone again ? or should i go directly to the cmw ???
Click to expand...
Click to collapse
Do not format via cwm. Did you use bootmenu or only cwm?
i used the windows to format my sdcard to fat32 and i m using the bootmenu...
walter79 said:
Do not format via cwm. Did you use bootmenu or only cwm?
Click to expand...
Click to collapse
can you please tell me whats the actual problem which is happening here ??? i am widout any clue why this is happening .. did i mess up my partitions while full flash with sbf of 2.59 ???
Try this custom rec
format your sd card, or insert a a new one preferable Class 4
after that
attached is the file.
Usb debug on
install it
usb debug off
restart it
open the software and boot into recovery.
hope it works.
Thanks
rachit2588 said:
format your sd card, or insert a a new one preferable Class 4
after that
attached is the file.
Usb debug on
install it
usb debug off
restart it
open the software and boot into recovery.
hope it works.
Click to expand...
Click to collapse
Thanks it worked
rachit2588 said:
format your sd card, or insert a a new one preferable Class 4
after that
attached is the file.
Usb debug on
install it
usb debug off
restart it
open the software and boot into recovery.
hope it works.
Click to expand...
Click to collapse
your a life saver

Dead Internal SD Solution Galaxy S

Fully working Samsung Galaxy S - Using 16GB External Micro SD to run OS and function as External SD!!
Ok so to set the scene I will quickly explain the issue I had with my Samasung Galaxy S.
One day it worked....
Next day it didn't...from then on it would only boot to first screen then continually repeat this step.....
After day two of having no luck at fixing the issue I got an S3...great phone!
BUT DONT GIVE UP JUST YET! It can be fixed!!!
Overall I think I would have spent somewhere in the ballpark of about 40 hours trying to fix the Galaxy S...stubborn? Yes....and my Galaxy S was such a good phone I hated the idea of binning it.
I wont waste your time listing the hundreds of methods I tried or posts I read, but in the end all things pointed to a dead internal SD.
I should be able to run the OS off an external SD... shouldn't I? The answer is Yes!
Many hours were spent on this stage and for about a week I had a working pone with OS running on External SD, but no access to the camera or anything which required an external SD.
I now have a perfectly working phone, using a 16gb External SD to run the OS and remaining space on it recognised as the external SD.
I can't promise this will work for everyone but here is the last of WAY TO MANY methods I used which completely solved this problem for me.
Let me know if this works for you & GOOD LUCK!
Step 1:
Your phone must be rooted!
The best, easiest and only way I was able to do it is with the following guide, big thank you to the person who put it up. As my Internal SD was dead! my external SD was to be my new internal SD...so the standard add to zip method for rooting on external SD... would obviously not work for me! yes I worded that perfectly!
BIG IMPORTANT NOTE IN CAPITAL LETTERS! - Make sure you have your external SD inserted during the below process!
http://forum.xda-developers.com/showthread.php?t=1852546
NOW! You should have your phone booting as it used to back in the good old days! However.....some of you wont...if this is the case please follow Step 1B.
Step 1B:
If the above did not work for you then you need a way to connect your Micro SD to your PC (I did this using a USB adaptor).
1. Download and install EaseUS partition master
2. Insert Micro SD in PC
3. EaseUS partition master
4. Wipe all partitions/data.
5. Create EXT4 partition approx 2gb
6. Create FAT32 partition with remaining space.
7. Remove battery from phone
8. Insert SD, Battery back in.
9. Turn on, you should have your phone booting as it used to back in the good old days!
IF NOT THEN.....Start with Step 1B then do Step1 then if all looking as it should move to step 2. If not...sorry...I have failed you!
Step 2:
You phone should now have booted like the good old days....but if you go into SD/Storage on android OS, you will notice it does not recognise the remaining space on the External SD as an external SD...it must be very confusing for the green robot!
So next steps as follows!
1. Install script manager app and mount r/w app from Google Play (market)
2. Use mount r/w to Mount the system partition in r/w mode.
3. Browse using script manager app as root (change setting in config).
4. Go to /system/etc folder and change file permission for vold.fstab to rwxrwxrwx (This means tick all the 9 boxes on the left not the 3 on the right.....such a technical explanation)
5. Then edit the vold.fstab file as text and change the following
Change:
dev_mount sdcard /mnt/sdcard auto /devices/platform/s3c-sdhci.0/mmc_host/mmc0
to
dev_mount sdcard /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Change:
s3c-sdhci.0
to
s3c-sdhci.2
Change:
mmc0
to
mmc2
Save the file and reboot the phone!
If all has gone well then your sdcard partition will be mounted and old faithful is ready to ride once again!
I hope this worked for you, if it didn't...gutted and I guess you have moved onto the next post...good hunting!
Please note this solution was created from a pile of posts I trawled through to get a solution. The above vold.fstab solution was taken from the following post. Unfortunately this posts overall solution didn't work for me, but I would not have been able to mount remaining External SD Space as well...you know THE EXTERNAL SD! without his post, which is the best part!
http://forum.xda-developers.com/show....php?t=1193010
Thanks for this, I'm going to try this again. Finally a good explanation of what to do.
I posted a thread yesterday with, I think, the same problem. Could you take a look and see if I have the same problem as you did?
Thread: http://forum.xda-developers.com/showthread.php?t=1905284
EDIT
Does the EXT4 partition has to be the first and the FAT32 the second?
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
EDIT
Thanks in advance!
Good Luck!
Pindagus said:
Thanks for this, I'm going to try this again. Finally a good explanation of what to do.
I posted a thread yesterday with, I think, the same problem. Could you take a look and see if I have the same problem as you did?
Thread: http://forum.xda-developers.com/showthread.php?t=1905284
EDIT
Does the EXT4 partition has to be the first and the FAT32 the second?
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
EDIT
Thanks in advance!
Click to expand...
Click to collapse
Does the EXT4 partition has to be the first and the FAT32 the second?
do EXT4 first, make both as primary partitions (NOT logical..probably obvious but just spelling it out )
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
with the method I used above you shouldnt need to drop any files on, let me know.
Quite similar except I couldnt acces my internal SD at all, let me know how you go!
Same issue ?
Hi,
My friend has Galaxy S, And he has similar issue. For him phone boots till splash screen and then reboots on its own.
He was able to go to recovery mode/wipe data/cache partitions etc. He was also able to go to download mode.
But he didn't try flashing custom ROM or anything instead he gave it to Samsung service center where they told him that his Motherboard has gone for toss and need to replace complete MOBO which would cost $110 (6K INR).
Though i didnt get time to check his cell myself i guess it is because of internal SD card has gone. Because he was telling in recovery page it was showing some mount error (not sure if it was internal or external SD card). If that is the case i can try this method to run OS from external SD card .
I have two questions here.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Thanks
Exactly the same issue! MOBO i doubt it!
happy20b said:
Hi,
My friend has Galaxy S, And he has similar issue. For him phone boots till splash screen and then reboots on its own.
He was able to go to recovery mode/wipe data/cache partitions etc. He was also able to go to download mode.
But he didn't try flashing custom ROM or anything instead he gave it to Samsung service center where they told him that his Motherboard has gone for toss and need to replace complete MOBO which would cost $110 (6K INR).
Though i didnt get time to check his cell myself i guess it is because of internal SD card has gone. Because he was telling in recovery page it was showing some mount error (not sure if it was internal or external SD card). If that is the case i can try this method to run OS from external SD card .
I have two questions here.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Thanks
Click to expand...
Click to collapse
That is exactly the same situation my phone was in, exactly.
I highly doubt there was any issue with the motherboard, as I understand it the internal SD is hard wired on the MOBO which is probably why they said to replace it as one piece.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
As above! As i understand it it would not go into either mode if MOBO was fried, doubt you would get any response at all.
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Il get back to you on this one
Same issue ?
--- deleted double post ------
Dead Internal SD Solution Galaxy S - HELP
reganstott,
First of all thank you for the hope.
1 - Your step 1, the link provided doesn't work (http://forum.xda-developers.com/show....php?t=1852546)
is there another link available?
In what step I ACTUALLY install the OS on the EXTERNAL SD, just asking to get the whole pic.
Is it possible, in order to just test it, use a 2GB SD card?
thanks
It seems to work, I only have to do a mount switch now.
The only thing is; I had the EXT4 (2GB) as first partition and FAT32 (5GB) as second, but now if I connect to my PC it sees only 2GB storage of FAT32. So I guess I have to switch them?
I'm going to try again and then do the mount switch.
EDIT
Confirmed this is working, running on CyanogenMod 9.1.0 right now.
I thank you really reaally much! I almost gave up, but luckily I saw your post in time.
Thanks!
help please
Hello,
I guess I have the same problem and wanted to know if you have to CORRECT links to the files
needed to do this.
thanks
p.s.
maybe a short EXTRA explanation on how you did it may help.
DannyBrazil said:
Hello,
I guess I have the same problem and wanted to know if you have to CORRECT links to the files
needed to do this.
thanks
p.s.
maybe a short EXTRA explanation on how you did it may help.
Click to expand...
Click to collapse
Just follow the steps, in case it is still unclear here exactly what I did;
Needed
microSDcard
Step 1
1. Wipe your external SD card and create 2 partitions; first one FAT32, second one EXT4 (about 2GB). Both has to be primary (not local)
I did this with Minitool Partition Wizard
2. Insert the SD card into your phone and install firmware from point 2: http://forum.xda-developers.com/showthread.php?t=1852546
3. Install CF-Root link is also here: http://forum.xda-developers.com/showthread.php?t=1852546
4. Check if phone boots right (this goes slower than normal, so just wait)
5. If phone works right do Step 2 from first post
Step 2
My phone happened to have no Play Store after the root. If so, follow this step 2
1. Install this zip: will upload this file in a minute -> I can't post outside links yet -.-
This will to the mount swap (for firmware above)
OR
2. Install a root explorer APK through ADB and edit vold.fstab like Step 2 in first post
Now your phone has to be working. If not, check the steps and try again.
Otherwise your problem is others than ours.
p.s.
If you do flash another ROM don't forget to swap mounts! (edit /system/etc/vold.fstab in zip file from ROM)
Currently on Slimbean 2.5
Thank you
Hello,
First I want to thank you for the effort and time. I believe that my SGS has a very similar problem.
I try to flash it with many ROMS, uninstall the apps, but after reboot they always come back and I get TONS os FORCE CLOSES.
Can't Install new apps, so I guess the internal SD is the problem.
The thing is that my SGS is a Brazilian model I9000b (with TV) just wanted to make sure if it changes anything from the
instructions you gave me.
(I don't need a working TV, so I don't care for another firmware)
thanks
---------- Post added at 09:49 AM ---------- Previous post was at 09:31 AM ----------
Just a question:
1 - I created 2 partitions on the EXTERNAL SD
2 - inserted the EXTERNAL SD into phone.
3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
---------- Post added at 10:15 AM ---------- Previous post was at 09:49 AM ----------
when I try to apply the new ZIP from sd it doesn't recofnize the SD
actually it never did.
it is showing me the INTERNAL SD with all the folder of the apps I had, which I can't delete anymore.
3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
I don't know how it works, but it does work.
when I try to apply the new ZIP from sd it doesn't recofnize the SD
Which ZIP do you mean? You only have to flash firmware and root through ODIN.
Great
Pindagus said:
It seems to work, I only have to do a mount switch now.
The only thing is; I had the EXT4 (2GB) as first partition and FAT32 (5GB) as second, but now if I connect to my PC it sees only 2GB storage of FAT32. So I guess I have to switch them?
I'm going to try again and then do the mount switch.
EDIT
Confirmed this is working, running on CyanogenMod 9.1.0 right now.
I thank you really reaally much! I almost gave up, but luckily I saw your post in time.
Thanks!
Click to expand...
Click to collapse
Not a problem, glad it worked for you too. Not sure why the step 1 link isn't working anymore. Anyone else reading this.... I will post soon with the method for step one rooting exercise. (to put a up a brief its just using the odin way of rooting to avoid the issue of not being able to use external sd add zip method)
Info
Hey there,
2 important questions:
1 - My SGS is the Brazilian model I9000B, does it make any difference?
2 - Can I use a 2GB EXTERNAL SD, or it MUST be more than this?
3 - Do I need to have any knowledge in LINUX?
thanks again.,
I have managed to get it all done, modded .fstab file before applying new rom but after applying the new rom and booting in, I get encryption unsuccessful. (CM9.1.0)
Is this unfortunately the end of what can be done?
Nope..
KiDCady said:
I have managed to get it all done, modded .fstab file before applying new rom but after applying the new rom and booting in, I get encryption unsuccessful. (CM9.1.0)
Is this unfortunately the end of what can be done?
Click to expand...
Click to collapse
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..
reganstott said:
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..
Click to expand...
Click to collapse
Thanks for getting back to me. I modded the rom to have the fstab use the correct settings but I still get the issue. I've tried with Darky and with CM.
Seems I will need to stay with jw4 and the app crashes until I get a new phone at the end of the year.
Pindagus said:
3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
I don't know how it works, but it does work.
when I try to apply the new ZIP from sd it doesn't recofnize the SD
Which ZIP do you mean? You only have to flash firmware and root through ODIN.
Click to expand...
Click to collapse
Hello,
Does my phone have a dead Internal Storage ?
after i install any (stock) rom by odin , it shows up in recovery 3e:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0pk2
and i try to flash new rom in External SDcard following http://forum.xda-developers.com/showthread.php?t=1852546,
odin don't know what i want , it puts new rom in internal sd which was broken so above error display.
I have formated my external sd by MiniTool Partition Wizard Home Edition with 2gb ext4 and 5.592 gb fat32.
but same errors.
What should i do to flash rom in external sd.
sorry about my English , i'm not native speaker.
reganstott said:
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..
Click to expand...
Click to collapse
Do you mean that after the new rom is applied and I get encryption unsuccessful, i need to access the root of the phone somehow (presumably android commander or something similar) and change the fstab that way while it is powered on and stuck on the error message?
Or do I need to modify the zip file I want to apply before I apply it and then deploy it? If so, then I have already done this with no success.
Also, is there a way to ensure that messages and contacts don't get lost everytime the phone loses power?
vietanhnc said:
Hello,
Does my phone have a dead Internal Storage ?
after i install any (stock) rom by odin , it shows up in recovery 3e:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0pk2
and i try to flash new rom in External SDcard following http://forum.xda-developers.com/showthread.php?t=1852546,
odin don't know what i want , it puts new rom in internal sd which was broken so above error display.
I have formated my external sd by MiniTool Partition Wizard Home Edition with 2gb ext4 and 5.592 gb fat32.
but same errors.
What should i do to flash rom in external sd.
sorry about my English , i'm not native speaker.
Click to expand...
Click to collapse
Yes, means your internal storage is dead. My advice - if you can get it replaced thru warranty do that, otherwise buy one on Ebay with broken screen (or/and any other parts) but with working motherboard and swap it. Last option - sell your phone for parts and get a new one...

[Q] Install zip from SDcard (No Files Found"

hi everybody i'd appreciate if you help me with this, i have put Viper jellybean rom on my SDcard ready to be flashe once i do the firmware upgrade.
I flashed firmware 1.36 successfully
flash recovery successfully
boot.img successfully, in fact I've done everything great,...then i went into recovery to try and install viper rom zip from SDcard, to my surprise i keep getting message saying "No Files Found"
I went and try to restore backed up data which i had but nowhere to be found with same message saying "No Files Found"
what's happened to the data on my SD and how can i get Rom into my SD card so i can flash from zip.
Did you unplug the cable to the pc while you were in recovery ?
Ok i've rebooted into the main screen look through he option and phone's telling me there is "NO SD card present?? looked into the Storage in the settings option and it says phone storage is unavailable?
I looked in the Albums folder it says "Please insert SD card
went and connected USB to PC and to try put data in there but i only get the CHARGE ONLY option in the Choose a connection type
install from sd card
Mr Hofs said:
Did you unplug the cable to the pc while you were in recovery ?
Click to expand...
Click to collapse
Not as far as i know, when i exited CMD after flashing is when i disconnected the USB from the PC and went into recovery
What recovery are you on ? And what rom are you running ?
What happens when you mount the sdcard in the recovery ?
Mounts & storage and then at the bottom
Mount as usb drive
Mr Hofs said:
What recovery are you on ? And what rom are you running ?
What happens when you mount the sdcard in the recovery ?
Mounts & storage and then at the bottom
Mount as usb drive
Click to expand...
Click to collapse
i've flashed Clockworkmod Touch Recovery 5.8.4.0 and i am running Viper Rom ICS 2.7 ,
I am now mounting SD card and thank god Now and see i get the SD card on the PC,
I am now going to drop Viper Rom into the SD card so i can flash i will let you know how it is going
Did you perhaps get a ems lunfile error when you were mounting the sdcard in the older recovery ?
And don't forget to flash the viper JB boot.img
appreciated
Mr Hofs said:
What recovery are you on ? And what rom are you running ?
What happens when you mount the sdcard in the recovery ?
Mounts & storage and then at the bottom
Mount as usb drive
Click to expand...
Click to collapse
I've read some other threads that of you and other members like BenHope, CleancoreKiller and responded to and they were very useful,
Like you said i went in ro recovery Mount SD card USB
Connected to PC and BAM!! PC recognized it.
went ahead and dropped the VIPER X 3.2.0 in the SD card.
Unmounted and went to Install zip from SD card and to my Surprise again there was the rom.
continued to install rom, rebooted and everything went fine.
Looked into the settings / storage and now it says 22.75GB available.
Things seem to be working good like WiFi, network etc.
I want to give a massive thanks to you MR Hofs and all the other senior members who have contributed to not just my thread but everyone else s threads which i have read, because without you guys us noobs we would be lost:crying: somewhere. Your Knowledge and expertise in this field is unparalleled and it is much appreciated always:angel:
Thanks for the kind word ! Appreciate it .... enjoy the viper JB ! :thumbup:

Help Needed - I bricked my phone

Hello guys,
I'm so upset. After several years with a stock GB rom (because I was scared of flashing), I've finally attempted to install a custom rom... And it didn't work as expected...
1) My phone was already rooted with DoomLord. for a long time.
2) I unlocked my bootloader and it worked fine. (http://forum.xda-developers.com/showthread.php?t=1662199)
3) I flashed the custom Kernel with Lupus GB v12 and it worked fine (http://forum.xda-developers.com/showthread.php?t=2054512)
4) I tried to flash with a custom rom, but couldn't. Here's why :
I put my custom rom zip file on my sdcard through windows explorer. But when I go to recovery TWRP and try to find my zip file on the sdcard, I cannot select it, because TWRP is "unable to mound /sdcard". I don't know why. The sdcard is fine, it should be able to read it.
So I have access to TWRP and recovery, but no access to the sdcard, so no possibility to install my custom rom... And I have no rom installed as I wiped everything according to the tutorial...
And as I'm a noob and all the explanations I can find are wayyyyy too technical for me, I'm basically stuck without any phone.
I know that this forum has not been too lively lately, but PLEASE, if you've read this , help me...
Thanks a lot,
Regards,
I had the same issue with my Samsung galaxy s3 with twrp but what I did was I changed My custom recovery to philztouch and I did flash without any problem. Maybe try searching for a another custom recovery because I wasn't able to fix mount error problem with TWRP.
Sent from my SM-N920C using XDA-Developers mobile app
podiwadda said:
I had the same issue with my Samsung galaxy s3 with twrp but what I did was I changed My custom recovery to philztouch and I did flash without any problem. Maybe try searching for a another custom recovery because I wasn't able to fix mount error problem with TWRP.
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
Hello Podiwadda,
Thanks for your answer.
So if I understand clearly, TWRP is my custom recovery that I got with Lupus kernel, right ?
So if I change my kernel, I change my custom recovery ?
Thus, I guess I should try DoomLord's DoomKernel in order to get another custom recovery ?
Shall I use Fastboot to flash with Doomkernel over Lupus kernel ? No risk in doing that ?
Sorry for these questions, but coming from Symbian which was quite easy and straightforward in terms of flashing, Android is sooooo complex and confusing (with root, bootloader, C-kernel, recovery, C-rom, etc...).
yes you flash the kernel in fastboot mode with flashtools or adb, usually there's no risk in that.
i would try to format the sd card directly from recovery. i think ntfs filesystem doesn't work though so check that also, format it to fat or ext from your pc..you're just a few step from booting
If you have Lupus GB12 kernel still flashed, you could try to flash rom from clockworkmod recovery. Just tap vol- when booting phone (TWRP is on vol+ button, right?)
SD card should be formated in fat32. NTFS or Ext partitiions doesn't work
Bakisha said:
If you have Lupus GB12 kernel still flashed, you could try to flash rom from clockworkmod recovery. Just tap vol- when booting phone (TWRP is on vol+ button, right?)
SD card should be formated in fat32. NTFS or Ext partitiions doesn't work
Click to expand...
Click to collapse
Hey guys, thanks for your support.
1) I tried with TWRP (through Lupus kernel) -> Cannot mount sdcard.
2) I tried with CWM recovery (through Lupus kernel) -> Cannot mount sdcard.
3) I changed the sdcard and retried in FAT -> Cannot mount sdcard.
4) I formated the sdcard in FAT32 and retried -> Cannot mount sdcard.
So the problem is not the sdcard, and not the recovery mode apparently.
I noted one surprising thing however - CWM recovery told me that my phone was NOT rooted when I tried to exit. But I'm sure it was before (I've done it many months ago with Doomlord, in order to use Link2sd).
- So, could it be the reason why I cannot mount the sdcard ?
- Is it possible that unlocking my bootloader and flashing with Lupus kernel somehow unrooted my phone ???
- Anyway way to check if my phone is still rooted through TWRP or CWM recovery ?
Thanks again,
I can't understand why it is not working either, but you colud try to do things from start:
-flash .any .62+ firmware with flashtool (return to stock)
-boot phone into that stock firmware and check is sdcard is recognized (format if needed)
-check if computer see sdcard (in storage (MSC) mode, not in MTP mode)
-copy your rom to sdcard (if you formated again sdcard)
-power off, enter in fastboot mode and flash Lupus GB12 kernel (with flashtool or any other ways you know)
-disconnect usb, power on and enter recovery (whatever you preffer more)
-delete system and data
-flash rom from sdcard
-reboot
PS:
Ignore CWM warning about root. It a feature for roms for locked bootloader (lupus kernel will root any rom installed). It is just few files in /system folder, so if there is no rom (because /system is deleted or it is unrooted stock rom) it will ask to root or not
PS2: maybe to try with external micro scdard reader in PC?
PS3: try another sdcard?
PS4: I must ask... You do have PHYSICAL sdcard insterted? right? Because x-play don't use emulated sdcard... (blessing of gingerbread )
Bakisha said:
I can't understand why it is not working either, but you colud try to do things from start:
[...]
PS:
Ignore CWM warning about root. It a feature for roms for locked bootloader (lupus kernel will root any rom installed). It is just few files in /system folder, so if there is no rom (because /system is deleted or it is unrooted stock rom) it will ask to root or not
PS2: maybe to try with external micro scdard reader in PC?
PS3: try another sdcard?
PS4: I must ask... You do have PHYSICAL sdcard insterted? right? Because x-play don't use emulated sdcard... (blessing of gingerbread )
Click to expand...
Click to collapse
-flash .any .62+ firmware with flashtool (return to stock) => Ok with R800i_4.0.2.A.0.62__1253-4437_.ftf through Flashtool
-boot phone into that stock firmware and check is sdcard is recognized (format if needed) => Yes it is recognized.
-check if computer see sdcard (in storage (MSC) mode, not in MTP mode) => Yes computer sees sdcard through MSC usb mode.
-copy your rom to sdcard (if you formated again sdcard) => Ok.
-power off, enter in fastboot mode and flash Lupus GB12 kernel (with flashtool or any other ways you know) => Ok with LuPuS_zeus_GingerBreadv12-full.IMG through fastboot and ADB package.
-disconnect usb, power on and enter recovery (whatever you preffer more) => Nok : I can enter TWRP recovery, but sdcard is still not recognized.
One interesting point though, sdcard IS recognized when I boot my phone into that stock firmware WITH Lupus kernel.
Thus, sdcard is not mounted / recognized ONLY when in recovery mode.
PS : ok.
PS2 : my sdcard is recognized with external micro scdard reader. that's how I put my C- Rom initially.
PS3 : I tried with 2 sd cards : one Nokia with 2gb in FAT then in FAT32. The other one Lexar 32gb in FAT32 (+ a partition in Ext4 for link2sd).
PS4 : yes, yes, physical sdcard. I wouldn't even know how to emulate a sdcard !
Seems that I'm stuck with stock GB then. But I'm happy my phone is not bricked and could be flashed with Flashtool. What can I do ?
- I was thinking about flashing with LuPuS_zeus_GingerBreadv12-full directly through Flashtool (and not from sdcard through recovery) if it's possible (but I need a .ftf file), hoping that the sdcard with then be recognized by the C-Rom.
- Otherwise, maybe trying with another kernel, like DoomLord's DoomKernel, or maybe even LuPuS_zeus_GingerBreadv12.5-ram.img (but I'd like to keep the 720p ability...).
Thanks for your advices !
It's more like wild guess then advice, but try:
-Delete any ext partitions on sdcard(s) and leave only fat32/fat
-Try with sideload in twrp recovery to flash rom (as i recall, it does not need sdcard) .
Sent from my R800i using XDA Free mobile app
Bakisha said:
It's more like wild guess then advice, but try:
-Delete any ext partitions on sdcard(s) and leave only fat32/fat
-Try with sideload in twrp recovery to flash rom (as i recall, it does not need sdcard) .
Sent from my R800i using XDA Free mobile app
Click to expand...
Click to collapse
1) I'm using the sdcard with no ext partition - just 2gb of FAT32.
2) Nope, not working either : see the screenshot enclosed - again this f******g message "unable to mount sdcard"
Any other idea ? Meanwhile, I will try with a third sdcard - we never know...
Thanks !
cityhunter62 said:
1) I'm using the sdcard with no ext partition - just 2gb of FAT32.
2) Nope, not working either : see the screenshot enclosed - again this f******g message "unable to mount sdcard"
Any other idea ? Meanwhile, I will try with a third sdcard - we never know...
Thanks !
Click to expand...
Click to collapse
Sry, i am out of ideas what could be wrong.
You could try flashing other kernels and see if any of them can access sdcar (you only need recovery) . You can easily flash bach lupus gb kernel oncev you are able to flash rom.
Bakisha said:
Sry, i am out of ideas what could be wrong.
You could try flashing other kernels and see if any of them can access sdcar (you only need recovery) . You can easily flash bach lupus gb kernel oncev you are able to flash rom.
Click to expand...
Click to collapse
Thanks a lot Bakisha for your continuous support and advices.
Ah ! Ah ! Ah ! I've found the problem ! I tried with a THIRD sdcard and it worked !
With just a noname / nobrand 8gb microSD HC class 2.......... When a Lexar and Nokia sdcard failed...
So I flashed NXT rom thanks to CMW recovery (surprisingly, TWRP failed to flash my rom...).
So now I have my new NXT rom flashed and perfectly working, except that.......... It does not recognise my 32gb sdcard ((
So I believe Lupus kernel does not like my Lexar 32gb sdcard :-/ As it was working perfectly with the stock kernel and rom.
To confirm this theory, I will try another kernel.
1) In order to try another kernel, I just flash over with Fastboot and ADB Package ?
2) Which one offers similar performances to Lupus ? Do you have any suggestion ?
Again, Thanks a lot !
cityhunter62 said:
Thanks a lot Bakisha for your continuous support and advices.
Ah ! Ah ! Ah ! I've found the problem ! I tried with a THIRD sdcard and it worked !
With just a noname / nobrand 8gb microSD HC class 2.......... When a Lexar and Nokia sdcard failed...
So I flashed NXT rom thanks to CMW recovery (surprisingly, TWRP failed to flash my rom...).
So now I have my new NXT rom flashed and perfectly working, except that.......... It does not recognise my 32gb sdcard ((
So I believe Lupus kernel does not like my Lexar 32gb sdcard :-/ As it was working perfectly with the stock kernel and rom.
To confirm this theory, I will try another kernel.
1) In order to try another kernel, I just flash over with Fastboot and ADB Package ?
2) Which one offers similar performances to Lupus ? Do you have any suggestion ?
Again, Thanks a lot !
Click to expand...
Click to collapse
Just use flashtool, it's easisest (with few clicks), but yeah, if partitiion size is same, just flash over existing kernel.
You could try other kernel, just keep in mind that you'll need to wipe system and data everytime kernels have different partitions size.
Doomlord's kernel is good, but lupus is newer one. Can't say which is better, it's a matter of opinion.
Or try extreme kernel (try to find links in general section)
Or try kernels at http://forum.xda-developers.com/showthread.php?t=2637637
I am using 64GB card, so it's not about size (also cheap chinese card)
Have fun
Bakisha said:
Just use flashtool, it's easisest (with few clicks), but yeah, if partitiion size is same, just flash over existing kernel.
You could try other kernel, just keep in mind that you'll need to wipe system and data everytime kernels have different partitions size.
Doomlord's kernel is good, but lupus is newer one. Can't say which is better, it's a matter of opinion.
Or try extreme kernel (try to find links in general section)
Or try kernels at http://forum.xda-developers.com/showthread.php?t=2637637
I am using 64GB card, so it's not about size (also cheap chinese card)
Have fun
Click to expand...
Click to collapse
Hi Bakisha,
So I tried to flash with Doomlord's kernel - same problem, sdcard is not recognized...
- So basically, with stock kernel and stock rom, no problem.
- With C-kernel and C-rom, sdcard is not recognized.
Now what I did is put my 32gb sdcard in my Symbian powered Nokia 808, just to check.
Interestingly, the Symbian OS told me that it cannot use this sdcard, because it is encrypted, and it is not able to remove the encryption because it does not have the key...
So here's my noob guess : somehow, my sdcard was encrypted when I was in stock GB rom.
As I totally wiped system and data in order to flash C-kernel and C-Rom, I've lost this bloody key.
So my sdcard is still encrypted and the key is lost, which would explain why it cannot be used by my flashed Xplay and my Symbian 808... It would also explain why other sdcards work properly with my flashed Xplay, while this one doesn't.
- Does that sound relevant to you ?
- Do you know how to remove the encryption for this card without the key ?
Again, thanks in advance !
cityhunter62 said:
Hi Bakisha,
- Does that sound relevant to you ?
- Do you know how to remove the encryption for this card without the key ?
Again, thanks in advance !
Click to expand...
Click to collapse
I don't know. I never deal with encrypted sdcard.
Bakisha said:
I don't know. I never deal with encrypted sdcard.
Click to expand...
Click to collapse
Hello Bakisha,
Thanks a LOT for your help and patience.
I've finally found a solution to my problem.
I'm pretty sure the problem was the sdcard's android encryption form the beggining.
Here's what I did to solve it :
- Download MiniTool partition wizard free.
- Wipe entirely your sdcard (fill sectors with zero & one).
- Once done, format your sdcard in FAT32 through Minitool partition wizard.
- Then, format in FAT32 with Windows explorer (right click on sdcard, then format).
- (OPTIONAL) Then, go back to Minitool partition wizard and create your Ext partition for Link2sd.
After all this, my sdcard was finally recognized by Lupus kernel and the C-Rom.
Hope it will help others.
cityhunter62 said:
Hello guys,
I'm so upset. After several years with a stock GB rom (because I was scared of flashing), I've finally attempted to install a custom rom... And it didn't work as expected...
1) My phone was already rooted with DoomLord. for a long time.
2) I unlocked my bootloader and it worked fine. (http://forum.xda-developers.com/showthread.php?t=1662199)
3) I flashed the custom Kernel with Lupus GB v12 and it worked fine (http://forum.xda-developers.com/showthread.php?t=2054512)
4) I tried to flash with a custom rom, but couldn't. Here's why :
I put my custom rom zip file on my sdcard through windows explorer. But when I go to recovery TWRP and try to find my zip file on the sdcard, I cannot select it, because TWRP is "unable to mound /sdcard". I don't know why. The sdcard is fine, it should be able to read it.
So I have access to TWRP and recovery, but no access to the sdcard, so no possibility to install my custom rom... And I have no rom installed as I wiped everything according to the tutorial...
And as I'm a noob and all the explanations I can find are wayyyyy too technical for me, I'm basically stuck without any phone.
I know that this forum has not been too lively lately, but PLEASE, if you've read this , help me...
Thanks a lot,
Regards,
Click to expand...
Click to collapse
i can fix your phone contact me on gmail [email protected]

Categories

Resources