Dead Internal SD Solution Galaxy S - Samsung Epic 4G Touch

Fully working Samsung Galaxy S - Using 16GB External Micro SD to run OS and function as External SD!!
Ok so to set the scene I will quickly explain the issue I had with my Samasung Galaxy S.
One day it worked....
Next day it didn't...from then on it would only boot to first screen then continually repeat this step.....
After day two of having no luck at fixing the issue I got an S3...great phone!
BUT DONT GIVE UP JUST YET! It can be fixed!!!
Overall I think I would have spent somewhere in the ballpark of about 40 hours trying to fix the Galaxy S...stubborn? Yes....and my Galaxy S was such a good phone I hated the idea of binning it.
I wont waste your time listing the hundreds of methods I tried or posts I read, but in the end all things pointed to a dead internal SD.
I should be able to run the OS off an external SD... shouldn't I? The answer is Yes!
Many hours were spent on this stage and for about a week I had a working pone with OS running on External SD, but no access to the camera or anything which required an external SD.
I now have a perfectly working phone, using a 16gb External SD to run the OS and remaining space on it recognised as the external SD.
I can't promise this will work for everyone but here is the last of WAY TO MANY methods I used which completely solved this problem for me.
Let me know if this works for you & GOOD LUCK!
Step 1:
Your phone must be rooted!
The best, easiest and only way I was able to do it is with the following guide, big thank you to the person who put it up. As my Internal SD was dead! my external SD was to be my new internal SD...so the standard add to zip method for rooting on external SD... would obviously not work for me! yes I worded that perfectly!
BIG IMPORTANT NOTE IN CAPITAL LETTERS! - Make sure you have your external SD inserted during the below process!
http://forum.xda-developers.com/showthread.php?t=1852546
NOW! You should have your phone booting as it used to back in the good old days! However.....some of you wont...if this is the case please follow Step 1B.
Step 1B:
If the above did not work for you then you need a way to connect your Micro SD to your PC (I did this using a USB adaptor).
1. Download and install EaseUS partition master
2. Insert Micro SD in PC
3. EaseUS partition master
4. Wipe all partitions/data.
5. Create EXT4 partition approx 2gb
6. Create FAT32 partition with remaining space.
7. Remove battery from phone
8. Insert SD, Battery back in.
9. Turn on, you should have your phone booting as it used to back in the good old days!
IF NOT THEN.....Start with Step 1B then do Step1 then if all looking as it should move to step 2. If not...sorry...I have failed you!
Step 2:
You phone should now have booted like the good old days....but if you go into SD/Storage on android OS, you will notice it does not recognise the remaining space on the External SD as an external SD...it must be very confusing for the green robot!
So next steps as follows!
1. Install script manager app and mount r/w app from Google Play (market)
2. Use mount r/w to Mount the system partition in r/w mode.
3. Browse using script manager app as root (change setting in config).
4. Go to /system/etc folder and change file permission for vold.fstab to rwxrwxrwx (This means tick all the 9 boxes on the left not the 3 on the right.....such a technical explanation)
5. Then edit the vold.fstab file as text and change the following
Change:
dev_mount sdcard /mnt/sdcard auto /devices/platform/s3c-sdhci.0/mmc_host/mmc0
to
dev_mount sdcard /mnt/sdcard auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
Change:
s3c-sdhci.0
to
s3c-sdhci.2
Change:
mmc0
to
mmc2
Save the file and reboot the phone!
If all has gone well then your sdcard partition will be mounted and old faithful is ready to ride once again!
I hope this worked for you, if it didn't...gutted and I guess you have moved onto the next post...good hunting!
Please note this solution was created from a pile of posts I trawled through to get a solution. The above vold.fstab solution was taken from the following post. Unfortunately this posts overall solution didn't work for me, but I would not have been able to mount remaining External SD Space as well...you know THE EXTERNAL SD! without his post, which is the best part!
http://forum.xda-developers.com/show....php?t=1193010

Thanks for this, I'm going to try this again. Finally a good explanation of what to do.
I posted a thread yesterday with, I think, the same problem. Could you take a look and see if I have the same problem as you did?
Thread: http://forum.xda-developers.com/showthread.php?t=1905284
EDIT
Does the EXT4 partition has to be the first and the FAT32 the second?
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
EDIT
Thanks in advance!

Good Luck!
Pindagus said:
Thanks for this, I'm going to try this again. Finally a good explanation of what to do.
I posted a thread yesterday with, I think, the same problem. Could you take a look and see if I have the same problem as you did?
Thread: http://forum.xda-developers.com/showthread.php?t=1905284
EDIT
Does the EXT4 partition has to be the first and the FAT32 the second?
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
EDIT
Thanks in advance!
Click to expand...
Click to collapse
Does the EXT4 partition has to be the first and the FAT32 the second?
do EXT4 first, make both as primary partitions (NOT logical..probably obvious but just spelling it out )
If so, isn't it a problem that windows can't read the FAT32 partition. In case I need to drop files on it? (because it only reads the first)
with the method I used above you shouldnt need to drop any files on, let me know.
Quite similar except I couldnt acces my internal SD at all, let me know how you go!

Same issue ?
Hi,
My friend has Galaxy S, And he has similar issue. For him phone boots till splash screen and then reboots on its own.
He was able to go to recovery mode/wipe data/cache partitions etc. He was also able to go to download mode.
But he didn't try flashing custom ROM or anything instead he gave it to Samsung service center where they told him that his Motherboard has gone for toss and need to replace complete MOBO which would cost $110 (6K INR).
Though i didnt get time to check his cell myself i guess it is because of internal SD card has gone. Because he was telling in recovery page it was showing some mount error (not sure if it was internal or external SD card). If that is the case i can try this method to run OS from external SD card .
I have two questions here.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Thanks

Exactly the same issue! MOBO i doubt it!
happy20b said:
Hi,
My friend has Galaxy S, And he has similar issue. For him phone boots till splash screen and then reboots on its own.
He was able to go to recovery mode/wipe data/cache partitions etc. He was also able to go to download mode.
But he didn't try flashing custom ROM or anything instead he gave it to Samsung service center where they told him that his Motherboard has gone for toss and need to replace complete MOBO which would cost $110 (6K INR).
Though i didnt get time to check his cell myself i guess it is because of internal SD card has gone. Because he was telling in recovery page it was showing some mount error (not sure if it was internal or external SD card). If that is the case i can try this method to run OS from external SD card .
I have two questions here.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Thanks
Click to expand...
Click to collapse
That is exactly the same situation my phone was in, exactly.
I highly doubt there was any issue with the motherboard, as I understand it the internal SD is hard wired on the MOBO which is probably why they said to replace it as one piece.
1] If MOBO was gone (like samsung service guy told) would it still boot at first place ? or even if it boots would it go to recovery or download mode ?
As above! As i understand it it would not go into either mode if MOBO was fried, doubt you would get any response at all.
2] Where exactly Recovery image is stored ? internal SD or in some other memory ?
Il get back to you on this one

Same issue ?
--- deleted double post ------

Dead Internal SD Solution Galaxy S - HELP
reganstott,
First of all thank you for the hope.
1 - Your step 1, the link provided doesn't work (http://forum.xda-developers.com/show....php?t=1852546)
is there another link available?
In what step I ACTUALLY install the OS on the EXTERNAL SD, just asking to get the whole pic.
Is it possible, in order to just test it, use a 2GB SD card?
thanks

It seems to work, I only have to do a mount switch now.
The only thing is; I had the EXT4 (2GB) as first partition and FAT32 (5GB) as second, but now if I connect to my PC it sees only 2GB storage of FAT32. So I guess I have to switch them?
I'm going to try again and then do the mount switch.
EDIT
Confirmed this is working, running on CyanogenMod 9.1.0 right now.
I thank you really reaally much! I almost gave up, but luckily I saw your post in time.
Thanks!

help please
Hello,
I guess I have the same problem and wanted to know if you have to CORRECT links to the files
needed to do this.
thanks
p.s.
maybe a short EXTRA explanation on how you did it may help.

DannyBrazil said:
Hello,
I guess I have the same problem and wanted to know if you have to CORRECT links to the files
needed to do this.
thanks
p.s.
maybe a short EXTRA explanation on how you did it may help.
Click to expand...
Click to collapse
Just follow the steps, in case it is still unclear here exactly what I did;
Needed
microSDcard
Step 1
1. Wipe your external SD card and create 2 partitions; first one FAT32, second one EXT4 (about 2GB). Both has to be primary (not local)
I did this with Minitool Partition Wizard
2. Insert the SD card into your phone and install firmware from point 2: http://forum.xda-developers.com/showthread.php?t=1852546
3. Install CF-Root link is also here: http://forum.xda-developers.com/showthread.php?t=1852546
4. Check if phone boots right (this goes slower than normal, so just wait)
5. If phone works right do Step 2 from first post
Step 2
My phone happened to have no Play Store after the root. If so, follow this step 2
1. Install this zip: will upload this file in a minute -> I can't post outside links yet -.-
This will to the mount swap (for firmware above)
OR
2. Install a root explorer APK through ADB and edit vold.fstab like Step 2 in first post
Now your phone has to be working. If not, check the steps and try again.
Otherwise your problem is others than ours.
p.s.
If you do flash another ROM don't forget to swap mounts! (edit /system/etc/vold.fstab in zip file from ROM)
Currently on Slimbean 2.5

Thank you
Hello,
First I want to thank you for the effort and time. I believe that my SGS has a very similar problem.
I try to flash it with many ROMS, uninstall the apps, but after reboot they always come back and I get TONS os FORCE CLOSES.
Can't Install new apps, so I guess the internal SD is the problem.
The thing is that my SGS is a Brazilian model I9000b (with TV) just wanted to make sure if it changes anything from the
instructions you gave me.
(I don't need a working TV, so I don't care for another firmware)
thanks
---------- Post added at 09:49 AM ---------- Previous post was at 09:31 AM ----------
Just a question:
1 - I created 2 partitions on the EXTERNAL SD
2 - inserted the EXTERNAL SD into phone.
3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
---------- Post added at 10:15 AM ---------- Previous post was at 09:49 AM ----------
when I try to apply the new ZIP from sd it doesn't recofnize the SD
actually it never did.
it is showing me the INTERNAL SD with all the folder of the apps I had, which I can't delete anymore.

3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
I don't know how it works, but it does work.
when I try to apply the new ZIP from sd it doesn't recofnize the SD
Which ZIP do you mean? You only have to flash firmware and root through ODIN.

Great
Pindagus said:
It seems to work, I only have to do a mount switch now.
The only thing is; I had the EXT4 (2GB) as first partition and FAT32 (5GB) as second, but now if I connect to my PC it sees only 2GB storage of FAT32. So I guess I have to switch them?
I'm going to try again and then do the mount switch.
EDIT
Confirmed this is working, running on CyanogenMod 9.1.0 right now.
I thank you really reaally much! I almost gave up, but luckily I saw your post in time.
Thanks!
Click to expand...
Click to collapse
Not a problem, glad it worked for you too. Not sure why the step 1 link isn't working anymore. Anyone else reading this.... I will post soon with the method for step one rooting exercise. (to put a up a brief its just using the odin way of rooting to avoid the issue of not being able to use external sd add zip method)

Info
Hey there,
2 important questions:
1 - My SGS is the Brazilian model I9000B, does it make any difference?
2 - Can I use a 2GB EXTERNAL SD, or it MUST be more than this?
3 - Do I need to have any knowledge in LINUX?
thanks again.,

I have managed to get it all done, modded .fstab file before applying new rom but after applying the new rom and booting in, I get encryption unsuccessful. (CM9.1.0)
Is this unfortunately the end of what can be done?

Nope..
KiDCady said:
I have managed to get it all done, modded .fstab file before applying new rom but after applying the new rom and booting in, I get encryption unsuccessful. (CM9.1.0)
Is this unfortunately the end of what can be done?
Click to expand...
Click to collapse
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..

reganstott said:
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..
Click to expand...
Click to collapse
Thanks for getting back to me. I modded the rom to have the fstab use the correct settings but I still get the issue. I've tried with Darky and with CM.
Seems I will need to stay with jw4 and the app crashes until I get a new phone at the end of the year.

Pindagus said:
3 - on ODIN, how he knows to install the new firmware ON THE EXTERNAL SD rather that on the INTERNAL SD??
I don't know how it works, but it does work.
when I try to apply the new ZIP from sd it doesn't recofnize the SD
Which ZIP do you mean? You only have to flash firmware and root through ODIN.
Click to expand...
Click to collapse
Hello,
Does my phone have a dead Internal Storage ?
after i install any (stock) rom by odin , it shows up in recovery 3e:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0pk2
and i try to flash new rom in External SDcard following http://forum.xda-developers.com/showthread.php?t=1852546,
odin don't know what i want , it puts new rom in internal sd which was broken so above error display.
I have formated my external sd by MiniTool Partition Wizard Home Edition with 2gb ext4 and 5.592 gb fat32.
but same errors.
What should i do to flash rom in external sd.
sorry about my English , i'm not native speaker.

reganstott said:
If you use this method and then do a new rom...u have to do the whole process again...each time you put a new rom on you will need to change .fstab etc..
Click to expand...
Click to collapse
Do you mean that after the new rom is applied and I get encryption unsuccessful, i need to access the root of the phone somehow (presumably android commander or something similar) and change the fstab that way while it is powered on and stuck on the error message?
Or do I need to modify the zip file I want to apply before I apply it and then deploy it? If so, then I have already done this with no success.
Also, is there a way to ensure that messages and contacts don't get lost everytime the phone loses power?

vietanhnc said:
Hello,
Does my phone have a dead Internal Storage ?
after i install any (stock) rom by odin , it shows up in recovery 3e:
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet, please UI menu for format and reboot actions
E:format_volume: rfs format failed on /dev/block/mmcblk0pk2
and i try to flash new rom in External SDcard following http://forum.xda-developers.com/showthread.php?t=1852546,
odin don't know what i want , it puts new rom in internal sd which was broken so above error display.
I have formated my external sd by MiniTool Partition Wizard Home Edition with 2gb ext4 and 5.592 gb fat32.
but same errors.
What should i do to flash rom in external sd.
sorry about my English , i'm not native speaker.
Click to expand...
Click to collapse
Yes, means your internal storage is dead. My advice - if you can get it replaced thru warranty do that, otherwise buy one on Ebay with broken screen (or/and any other parts) but with working motherboard and swap it. Last option - sell your phone for parts and get a new one...

Related

Partioning SD Card

Sorry, done a search and looked through all posts but can't seem to find a guide to partition sd card for use with apps2sd.
My phone is rooted and have rom manager installed where it looks I can perform the partition. Can someone point me to a noobs guide to partition or give us a hand. I have read about all different extensions to make the partition to but have no idea what they all are. Any help appreciated.
Swap - 0
Ext3 - as little or as much as you wish (usually 512-1024mb)
FAT31 - the rest
obviously this will wipe the sd card, what about all backups etc. Do i just copy to pc then copy them back when partition is complete?
Yes, but remember you will have less space on for data since a part of it will be taken up by Ext3 partition.
no problem, cheers for that
Make this sticky!!!!!!!!!!!!!!
memphisuklf said:
Sorry, done a search and looked through all posts but can't seem to find a guide to partition sd card for use with apps2sd.
My phone is rooted and have rom manager installed where it looks I can perform the partition. Can someone point me to a noobs guide to partition or give us a hand. I have read about all different extensions to make the partition to but have no idea what they all are. Any help appreciated.
Click to expand...
Click to collapse
I've been trying to make this subject a sticky for a while.
I posted some tutorials in the Q&A Thread: See my post http://forum.xda-developers.com/showthread.php?t=713643 (bottom of the page)....
Good luck!
does rom manager create the partition as ext 3 as default?
ok, seems I now have a problem. Did partition through manager 512mb/0 swap seemed to work fine but now phone won't boot, stuck at htc white screen. Any ideas?
Edit
Ok booted after 4th time of pulling battery. Doesn't look like it partitioned though. on windows I only have H: with 3.18gb
I used the Android Recovery Menu from Paul's old rooting tutorial which let me partion the memory card easily.
gave up for now, will have a look later on but don't want to mess with it that much as i`m using my stock sd card
I think you already have A2SD installed. I used Rom Manager to do the partition too and it was straightforward. No problems with rebooting though. If you reinstall your apps now, and if you check with a system info apps, you will find that you now have loads of internal memory.
ah, ok got 115mb free after installs(Used to have 10mb). So the defrost rom i`m using will automatically use apps 2sd when a partition is found?
Thought I had to set this up with spare parts?
How come I cant see the partition through windows?
Windows doesn't recognise linux partitions. Check with Quick System Info if A2SD is working correctly.
haha, feel stupid now. Working fine when checked with quick system info. Cheers for all the help guys, much appreciated
memphisuklf said:
ok, seems I now have a problem. Did partition through manager 512mb/0 swap seemed to work fine but now phone won't boot, stuck at htc white screen. Any ideas?
Edit
Ok booted after 4th time of pulling battery. Doesn't look like it partitioned though. on windows I only have H: with 3.18gb
Click to expand...
Click to collapse
If u have 4Gb card and in windows you see only 3.2Gb partition, then i think you have ext partition there ok. Windows wont see your ext.
Rom Manager will make ext3 partition in the end of your sd card.
With 512Mb ext + 0Mb swap you will get fat32 partition + ext3 in your SD card.
Sent from my HTC Desire using XDA App
On a similar topic, if I install a 2.2 ROM with Google APS2SD and legacy APS2SD, do I only need to create a partition for the legacy version of APPS2SD? If I just wanted to use the Google version can I just leave the card as it is?
yep, no formatting is needed for google app2sd
Here's my experience to Partition the SD card.
1) I rooted my Desire with "UnrEVOked"
2) Flashed the phone with a ROM
3) Then I went to "Market" and download "ROM manager", which has an option to "Partition SD card".
4) Reboot
dexter9898 said:
Here's my experience to Partition the SD card.
1) I rooted my Desire with "UnrEVOked"
2) Flashed the phone with a ROM
3) Then I went to "Market" and download "ROM manager", which has an option to "Partition SD card".
4) Reboot
Click to expand...
Click to collapse
There is a related thread here: http://forum.xda-developers.com/showthread.php?t=731531
I developed the most common methods of partition your SD Card, and answered some questions and asked some additional ones.
I would very much welcome it, if anyone wants to participate in assembling the infos about SD cards....
Not the best guide but does work, you may need to adjust the figures depending on what size card you got.

[GUIDE] [23 JAN] How to - For people who can't boot into ClockWork

Are you having trouble installing ClockWorkMod?
You click “BOOT AD SD” in MAGLDR and the screen flashes up with an error quickly and returns straight abck to MAGLDR main menu?
This guide is for you.
NOTE: I’m sure there are plenty of other methods which also work, but this method worked for me so I figured I’d see if I can help a few people out. Please don’t post if you are just going to have a whinge about your method being better than mine. I'm not interested in debates. I am however happy for people to post if they have a method that they have found successful. Once verified, I will update the OP.
Before we begin, I take no responsibility for any damage to your device or loss of important data.
Using this procedure will wipe your memory card so BACK UP your files first.
You will need:
• A Windows PC running XP or greater.
• A MicroSD reader (I have had issues with mounting my SD via the HD2 using MAGLDR, you might find it works fine for you, but I strongly recommend using an SD Card Reader.
• A copy of SD Formatter (free).
NOTE: If you have been using APPS2SD+, you are going to lose all your apps performing this procedure. I strongly suggest using a program like Android Commander to pull the APK files off your phone. You can then copy them back and re-install everything once Clockwork is working. ☺
OK HERE WE GO….
PHONE SHOULD NOT BE CONNECTED TO PC VIA USB UNTIL STEP 9.
1. Shut down your phone and take out the SD Card.
2. Insert the SD Card in to your card reader and plug it in to your computer.
3. Load “SD Formatter” and select your SD card from the “Device” drop down menu.
4. Click on the “Option” button and choose “Full Erase” and set “Format Size Adjustment” to “ON”. This will ensure that any previous partitions will be removed correctly. Click OK.
Don’t be alarmed, we will create a new EXT partition later on for APPS2SD+ ☺
5. Click “Format” and wait for your SD card to finish formatting. Time will vary depending on the size of your SD Card.
6. Now your SD card is formatted, copy the Clockwork “initrd.gz” and “zImage” files to the root of your SD card.
7. Copy the zip ROM of your choice to the SD card.
8. Put the SD card back in your phone and boot into MAGLDR by holding down the power button while powering on.
9. Flash the Clockwork Partition system to your phone in the usual NAND manner. When the phone reboots, disconnect it from the PC (unplug the USB cable and hold down the power button to boot back in to MAGLDR main menu. For more information on flashing NAND ROM's, BROWSE THESE GUIDES
10. Select “BOOT AD SD” from the menu. If you have followed this guide correctly, you should now be in ClockWork Recovery ☺
At this stage the process will vary depending on the style of ROM you wish to use. If you want to use a ROM which supports APPS2SD, you will need to create a new EXT partition on your SD card using the partitioning tool built in to ClockWork Recovery. If you do not wish to use APPS2SD, you can just go ahead and flash the ROM zip.
IF YOU WANT TO USE APPS2SD:
1. Use the Partitioning tool built in to ClockWork Recovery to create the partitions for you. Instructions for this can be found HERE.
2. Once partitioned, remove the SD card from your phone and insert it into your card reader. Copy back the “initrd.gz” and “zImage” files to the root of your SD card, along with the ZIP ROM you desire to use.
3. Put the SD card back in your phone, reboot the phone and flash the zip ROM of your choice.
DONE!!
I hope this guide helps a few people who were completely stuck with ClockWork as I was.
If this has helped you, please click on the Thanks button.
All credit goes to the amazing developers and XDA admins and mods. You are all awesome.
reserved.... Hopefully you can all help me keep this guide up to date as new versions of MAGLDR and ClockWork are released.
Sentinel196 said:
Are you having trouble installing ClockWorkMod?
You click “BOOT AD SD” in MAGLDR and the screen flashes up with an error quickly and returns straight abck to MAGLDR main menu?
This guide is for you.
NOTE: I’m sure there are plenty of other methods which also work, but this method worked for me so I figured I’d see if I can help a few people out. Please don’t post if you are just going to have a whinge about your method being better than mine. I'm not interested in debates. I am however happy for people to post if they have a method that they have found successful. Once verified, I will update the OP.
Before we begin, I take no responsibility for any damage to your device or loss of important data.
Using this procedure will wipe your memory card so BACK UP your files first.
You will need:
• A Windows PC running XP or greater.
• A MicroSD reader (I have had issues with mounting my SD via the HD2 using MAGLDR, you might find it works fine for you, but I strongly recommend using an SD Card Reader.
• A copy of SD Formatter (free).
NOTE: If you have been using APPS2SD+, you are going to lose all your apps performing this procedure. I strongly suggest using a program like Android Commander to pull the APK files off your phone. You can then copy them back and re-install everything once Clockwork is working. ☺
OK HERE WE GO….
1. Shut down your phone and take out the SD Card.
2. Insert the SD Card in to your card reader and plug it in to your computer.
3. Load “SD Formatter” and select your SD card from the “Device” drop down menu.
4. Click on the “Option” button and choose “Full Erase” and set “Format Size Adjustment” to “ON”. This will ensure that any previous partitions will be removed correctly. Click OK.
Don’t be alarmed, we will create a new EXT partition later on for APPS2SD+ ☺
5. Click “Format” and wait for your SD card to finish formatting. Time will vary depending on the size of your SD Card.
6. Now your SD card is formatted, copy the Clockwork “initrd.gz” and “zImage” files to the root of your SD card.
7. Copy the zip ROM of your choice to the SD card.
8. Put the SD card back in your phone and boot into MAGLDR by holding down the power button while powering on.
9. Flash the Clockwork Partition system to your phone in the usual NAND manner. When the phone reboots, hold down the power button to boot back in to MAGLDR main menu. For more information on flashing NAND ROM's, BROWSE THESE GUIDES
10. Select “BOOT AD SD” from the menu. If you have followed this guide correctly, you should now be in ClockWork Recovery ☺
At this stage the process will vary depending on the style of ROM you wish to use. If you want to use a ROM which supports APPS2SD, you will need to create a new EXT partition on your SD card using the partitioning tool built in to ClockWork Recovery. If you do not wish to use APPS2SD, you can just go ahead and flash the ROM zip.
IF YOU WANT TO USE APPS2SD:
1. Use the Partitioning tool built in to ClockWork Recovery to create the partitions for you. Instructions for this can be found HERE.
2. Once partitioned, remove the SD card from your phone and insert it into your card reader. Copy back the “initrd.gz” and “zImage” files to the root of your SD card, along with the ZIP ROM you desire to use.
3. Put the SD card back in your phone, reboot the phone and flash the zip ROM of your choice.
DONE!!
I hope this guide helps a few people who were completely stuck with ClockWork as I was.
If this has helped you, please click on the Thanks button.
All credit goes to the amazing developers and XDA admins and mods. You are all awesome.
Click to expand...
Click to collapse
And for nand 1024 t-mous ??
No boot tooooooo
Same method is mentioned in other tutorials so what's new in it?Most of the users are not been able to format as Full erase through SD card formatter so what would they do?I myself getting error of 123Fatal Hit n there the phone remains stuck.
As I stated in the OP, I'm just trying to help out. All the information is available elsewhere, this just provides an easy reference for people having problems.
If the Windows based formatting tools arent working for you, I'd suggest formatting to FAT32 in Gparted, then trying to format again with SD formatter.
Sentinel196, thanks for your GUIDE!
I tried this, unfortunately, still it doesn't work.
I think the problem is with my 8GB class 4 (cheap, unknown brand) SD card. For some reason, MAGLDR (1.11) doesn't recognize it fully when I select USB MassStorage. I hear the "USB device connected"-sound, but no drive comes up in Windows Explorer.
I tried another card I have, a Kingston 16GB class 2 card, with that one, everything works fine.
The strange thing is that the 8GB card works fine under Android, never had any problems with it until trying to use it with MAGLDR.
Anyway, I will put this issue I have with my SD-card in the MAGLDR-thread.
None of theese guide helped me.... It is not just about formating SD and stuff ....
I had to flash old WM 6.5 ROM, than do all again, radio, MALGDR, format SD, ClockworkMod ... like u do for the 1st time when 1st NAND droid came out ... don't know if this help someone ... but helped me ... my SD is 8GB class 2 ...
when I copied some file/folder to SD I always used Card Reader ...
Sentinel196 said:
9. Flash the Clockwork Partition system to your phone in the usual NAND manner. When the phone reboots, hold down the power button to boot back in to MAGLDR main menu...
Click to expand...
Click to collapse
In my experience for best results at this stage (when the phone reboots from CWM installation and every time you wish to boot into CWM) the device should be disconnected from USB (my device specs in siggy). I posted my take on a tutorial HERE in the original [10 JAN][RECOVERY] ClockworkMod Recovery for HD2 - v1.2 thread.
Cheers
Nice guide!
Thanks man! I was about to give up on clockwork till your wisdom made it possible. Now my phone very complete and stable."Flashing on the fly!"
To those having trouble follow this guide to the T it works! You may have to do it twice if your 4:20 friendly Hope everyone enjoys clockwork as much as I am!
HD2 best investment i ever made! "sorry dog"
For me, when I first got Magldr on the phone i tried messing around with the Boot AD SD option and tried changing the SD directory where Android boots from and that is what I think got Clockwork not to boot correctly for me. So instead of putting the two copy to sd files on the root of my sd card, I put in into a folder called nand and through the services menu in Magldr I added that as SD folder boot option for Clockwork Mod recovery and everything worked just fine.
I have seen a few people do this ..
zachmerrill504 said:
For me, when I first got Magldr on the phone i tried messing around with the Boot AD SD option and tried changing the SD directory where Android boots from and that is what I think got Clockwork not to boot correctly for me. So instead of putting the two copy to sd files on the root of my sd card, I put in into a folder called nand and through the services menu in Magldr I added that as SD folder boot option for Clockwork Mod recovery and everything worked just fine.
Click to expand...
Click to collapse
I have seen a few people do this .. and it seems to work most times.
Give it a try if your having problems
Wooohoooo..... After a thousand things I tried this one finally worked. Thanks!!!
zachmerrill504 said:
For me, when I first got Magldr on the phone i tried messing around with the Boot AD SD option and tried changing the SD directory where Android boots from and that is what I think got Clockwork not to boot correctly for me. So instead of putting the two copy to sd files on the root of my sd card, I put in into a folder called nand and through the services menu in Magldr I added that as SD folder boot option for Clockwork Mod recovery and everything worked just fine.
Click to expand...
Click to collapse
Wow.....u r so smart....finally working like charm.Thanks....
thank you. i got cwm finally working now!
DoubleYou79 said:
Wooohoooo..... After a thousand things I tried this one finally worked. Thanks!!!
Click to expand...
Click to collapse
LOL .. Good to hear!
Are there any guides for using clockwork once were have it running? Also the clockwork app are we able to use it with our HD2's cause its telling me it needs to install clockwork? I'm just wondering cause MDJ put it on 2.6
Thanks for any help
cwm works for me just fine to flash a ROM, but some of the other options concern me especially when try to use the backup and restore.... i always get an error ?/cache not found... I have set FAT32/ (EXT4/ EXT3/ Linux Swap all under 1028MB) Primary; GPARTED Live PROG
sd card space free: 11257MB
backing up boot...
backing up recovery...
E:Failed to find recovery partition to mount at "/recovery"
Can't mount /recovery
E:Can't mount /cache/recovery/last _log
can't open /cache/recovery/last_log
E:Can't Find misc
E: Failed to find "cache" partition to mount at /cache
tmknight said:
In my experience for best results at this stage (when the phone reboots from CWM installation and every time you wish to boot into CWM) the device should be disconnected from USB (my device specs in siggy). I posted my take on a tutorial HERE in the original [10 JAN][RECOVERY] ClockworkMod Recovery for HD2 - v1.2 thread.
Cheers
Click to expand...
Click to collapse
Thanks for that. I forgot to mention connection state. Added to guide
hrasek88 said:
None of theese guide helped me.... It is not just about formating SD and stuff ....
I had to flash old WM 6.5 ROM, than do all again, radio, MALGDR, format SD, ClockworkMod ... like u do for the 1st time when 1st NAND droid came out ... don't know if this help someone ... but helped me ... my SD is 8GB class 2 ...
when I copied some file/folder to SD I always used Card Reader ...
Click to expand...
Click to collapse
Just out of interest, did you try just reflashing MAGLDR before starting completely from scratch? I cant see how loading a WinMo6.5 ROM would make a difference as the partition table is erased by MAGLDR when a NANDROID ROM is flashed.
zachmerrill504 said:
For me, when I first got Magldr on the phone i tried messing around with the Boot AD SD option and tried changing the SD directory where Android boots from and that is what I think got Clockwork not to boot correctly for me. So instead of putting the two copy to sd files on the root of my sd card, I put in into a folder called nand and through the services menu in Magldr I added that as SD folder boot option for Clockwork Mod recovery and everything worked just fine.
Click to expand...
Click to collapse
I can't understand the part after making nand directory. What do you do in service menu?

[Q] HTC Desire unable to mount SD card

Hi All,
I have a problem with my SD card. My phone doesn't recognise SD card after I created ext4 partition through partition magic on windows 7. Here is what happened.
- I have rooted desire running CM 7.0.3.
- I wanted to go back to Starburst 1.4 rom.
- I have class 4 16 gb sd card (fat + ext3) with 512 mb of ext3 and rest fat32 (this was when everything was running good)
- I flashed the new rom through CWM, but only got like 54 mb on sd left.
- So I manually formatted ext3 and changed it to ext4 using partition magic on windows 7 (connected sd card through a reader).
- After that I flashed the new rom, but still got the same size left.
- After that I went back to CM7.0.3 which is working fine for me.
However, at this time, my phone doesn't recognise my SD card.
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
I believe I was able to install CM7.0.3 coz it was a small rom was fit directly into phone's internal memory.
At this time, I can't see my SD card on phone. Can't play music or install any files or anything.
Looking for some quick help.
Thanks,
Satyam
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
topgunmatt said:
Hi,
I had the same problem.
I got someone to format my SD card in there phone, then reverthing worked.
Regards
Matt
Click to expand...
Click to collapse
Hi Matt,
So are you saying that you got your SD card formatted by someone else using Rom Manager ?
- As of now, when I click on the inbuilt ROM Manager in CM7, it says " The SD Card needs to be mounted to use ROM Manager!"
That means my SD card is abviously not read by my phone.
Looking for some help. I don't want to do something silly at this time.
Atleast, as of now my phone is not bricked and is working, just the SD is not.
Any suggestions/comments or link to my problem is more than welcome.
Thank You
Hmmm, i smell another usb brick here, we've had so many these days, and all by people using cwm and flashing gb sense roms...just to prove i'm right, can you connect the phone to your pc? If you're not able to do that, then u have 100% chance it's a usb brick.
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
sroy001 said:
OMG !! yeah you're right.. now when I connected my phone using a USB, it doesn't give me the option to "mount USB".
What do to from here ? I don't know what is a USB brick and am pretty poor with linux commands !!!
Plz help.. However I can see a a couple of ROMs through recovery mode in my SD card, but can't flash those which require an EXT.
Plz help !!!!!
Click to expand...
Click to collapse
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
vnvman said:
Haha, calm down its'no biggie believe me
Here you can find a tutorial on how to fix it: http://forum.xda-developers.com/showthread.php?t=691639
Feel free to ask if you need further help (bus is farkin boring).
Click to expand...
Click to collapse
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
sroy001 said:
Hi,
Are you saying that formatting SD card and making fresh ext partition through a media reader will not help in this case ?
I am very confused so to say.. I read the link that you posted, it talks about CID which I'm not able to find.. Can't see that option in fast boot (recovery).
Is there some other way to fix all this ?
Any more tricks/ suggestions are more than welcome..
Please see detailed info about my issue in the post
Click to expand...
Click to collapse
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
i just fixed my brick lol . i found out bcuz i coulnt enable bluetooth
vnvman said:
Nope: i'm sorry but there is no other way...the problem lies in the misc partition, and that one doesn't get touched by simply toying with your sd, it's on nand, and no rom flashing/nandroid restore can touch it either. This process is the only way to go. CID can be obtained via adb command, i hope you'll have it installed and set up correctly.
Click to expand...
Click to collapse
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
sroy001 said:
Hi,
Okay I get it.. I need to fix my nand partition, now question -
1) I can figure out the 1st step "Find out your CID. Go into fastboot mode, and do 'fastboot oem boot" - Nothing happens when I click on fast boot option in recovery mode. The other method CID generator also asks for CID.. how do I get that.. that's my biggest question.
2) How can I see the rom version.
I know, I might me sounding stupid, but I'm not a pro.. used to love flashing new ROMs earlier and this time I just messed it up.
Need some step-by-step help.. I might be asking for too much, but I trust this forum and believe Android has too many fans hooked to it.. so I will get some help
Click to expand...
Click to collapse
Also just want to let the forum know that I'm running a custom ROM (CM 7) and don't see the option of software info under Settings>About phone. Any other way to find out rom version ???????/
Ok, sorry man, i was out for a ride
To see the CID you have to type "fastboot oem boot" in the terminal, after navigating to the path where you have the sdk, for example:
"cd c:/sdk/tools"
"fastboot oem boot"
Then you should get all the info, together with the CID ofc...obviously you need to have adb installed and working in order to do that (there ia a lot of tutorials for that, just use the search function).
As to rom version, you don't need it, just download the mtd0.img, open it with the hex editor and mod it with your CID, then go for the next step
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
vis-tec said:
I dont believe you have bricked your phone, i think you have created a partition on it without making it a primary partition along with the fat32 parition.
boot into recovery and mount your SD card to your PC. Reformat the whole card and then it should work again, you may just be able to go into your partition software and amend to show 'primary' on each, if not read on. Couple of options then, download ROM manager from the market and reformat the ext3 using rom manger if not do it via your windows software but make sure both partitions are set to 'Primary'.
Click to expand...
Click to collapse
It's a usb brick, not a plain brick: when you plug it to pc the phone usually doesn't even light up the led.
sorry, i read that he had full use of his phone bar the SD card
- I saw that I can't format ext in recovery as i get this error
E:Can't mount /dev/block/mmcblk0p2(File exists)
Error mounting SDEXT: !
Click to expand...
Click to collapse
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
hi, still me sorry for spamming, just found a nice TUT using gparted on xda http://forum.xda-developers.com/showthread.php?t=535914
fragargon said:
hi, seems you got bad partition on your sd card, since it s normal that you can't mount sd while plug on usb.
did you already put out your sd card out the phone and try to read it with a usb scard reader plug on your computer??
cid error mean you have messed-up your misc partition which is the one in your nand where the recovery is located... didn't see any error about this in your thread...
in the boot, should fail with error misc partiton cid unknown etc...
have a try about sd card reader it's easer than misc error fix
give a try on this site and try using gparted cd live... don't need to be expert in linux command (it s a graphical interface) should you know that FIRST FAT32 PRIMARY partition and LAST EXT3 (is less fast but really more stable and relyable fs) PRIMARY partition
Click to expand...
Click to collapse
Fixing misc doesn't take more than a minute if you have a working adb...repartitioning micro sd card takes loads of time instead, especially if it's big, coz you have to backup all of your data then copy them back, and that's a pain, especially if the sd isn't very fast.
Anyway you might be right there, just the other day a guy had a similar issue caused by multiple ext partitions not being recognized properly. I just thought it was a usb brick coz it's very common since the new gb sense roms rolled out and people started partitioning like crazy with cwm (which really SUCKS at that), and this either cause misc corruption or messed partitions on sd card: i'd suggest everyone to partition with amon them flash back any 3.0+ cwm to flash the rom, if you don't have the chance of using linux live cd (but you really should).
All sorted --------- RESLOVED !!!!
Okay Listen all Desire Owners-- I was able to fix this USB brick without having to go through all which was available on internet..
What I did -
1) Came home and formatted my EXT4 to ext3 and simply reflashed cm7 rom
All worked like charm - Now My SD card is mountable and works perfectly
Good for you
Anyway make sure you set up adb properly on your pc, it will save your life some day: it takes a while but it's worth it...i wouldn't get inti the rom flashing thing without it. Just a suggestion
Bests.

Cannot change Ext 2-3 or 3-4 after reformat....

Okay, so I've partitioned the SD card, but when I went to do this step.... (I'm following an XDA beginner's guide)
"Once the process is complete, select Upgrade EXT 2 to EXT 3. Do not use EXT 4 On Sense ROMS. DEFINITELY use EXT4 on newer AOSP ROMS. Your SD Card is now partitioned and you’re ready to restore your backup and flash your custom ROM so back out, go to USB-MS Toggle, select it and copy everything from the EVO Backup folder on your computer, back to your SD Card."
It didn't work... This is the error message I get... "Oops... Something went wrong! Please check the recovery log."
I think default partitions to Ext 2 and then you can upgrade. Please advise if there is something I am not doing correct.
I am using an AOSP ROM, so how to I upgrade to Ext 4?
It seems like once this is done, I am ready to carryover the backup files from my PC, wipe, and install the new ROM.
So I am reading that it is possible that my current Kernel and / or SD Card may not support going to Ext 2,3, or 4.
I'm running Android 2.3.3 (hence why I desperately need an upgrade)
Kernel Version:
2.6.35.10-g13578ee
[email protected] #1
(dated) 2011
My SD Card:
Samsung 8 GB MicroSD
Class 2
Shows 6.54 space available after Reformat and Partition with 1024 (1GB) selected for EXT2
Could either of these cause a problem for why I can't upgrade my EXT? I'm a total Noob, so I need some help with this. Thanks.
GARover said:
So I am reading that it is possible that my current Kernel and / or SD Card may not support going to Ext 2,3, or 4.
I'm running Android 2.3.3 (hence why I desperately need an upgrade)
Kernel Version:
2.6.35.10-g13578ee
[email protected] #1
(dated) 2011
My SD Card:
Samsung 8 GB MicroSD
Class 2
Shows 6.54 space available after Reformat and Partition with 1024 (1GB) selected for EXT2
Could either of these cause a problem for why I can't upgrade my EXT? I'm a total Noob, so I need some help with this. Thanks.
Click to expand...
Click to collapse
I'll need the recovery log file,it should have dumped it onto the root of your sd card,lets see what errors you recieved.
Diablo67 said:
I'll need the recovery log file,it should have dumped it onto the root of your sd card,lets see what errors you recieved.
Click to expand...
Click to collapse
I just plugged in the phone and opened my SD folder on the computer and don't see anything in there.
Is there a way to get to the log file on the phone, in Recovery mode, per se? If not, please help!
GARover said:
I just plugged in the phone and opened my SD folder on the computer and don't see anything in there.
Is there a way to get to the log file on the phone, in Recovery mode, per se? If not, please help!
Click to expand...
Click to collapse
Are your display settings on your computer set so all files, including protected system ones, will show? It may be that the file is there, but just that your explorer is not showing it.

[Q] Sd card issue (CM 10)

Hello folks,
Recently I have flashed CM 10 via CWM 6.0.3.2 on my Samsung Galaxy W. (I followed this procedure: http://forum.xda-developers.com/showthread.php?t=1990795)
Everything worked out fine (yay) exept for two issues I have:
1. My SGW doesn't recognize my Sd card (internal) at all. (though internal is mounted in cwm menu)
I have several folders regarding my sd and external sd:
- sdcard> tells me it is "unplugged" (in German> translation might differ) when I enter via file manager
- mnt/sdcard> here it tells me my sd card is unplugged as always
- storage/sdcard0> unplugged
- external_sd> it tells me sd card unplugged if I enter
- mnt/external_sd >here I can enter all of my folders
- storage/sdcard1> here I can enter again
2. My SGW can't mount my external sd anymore. I can clearly enter my external sd's files, but apparently I cannot mount my PC. Especially not with Multimount because it requests me to mount my internal sd (issue 1).
So how do I get it to work properly? - is it possible to do it via Terminal Emulator?
Specifications:
- Samsung Galaxy W
- Android Version 4.1.2.
- Kernel Version: 3.0.80-cyanogenmod-gc689589
[email protected] #1
- Cyanogenmod Version: 10-20130605- UNOFFICIAL-ancora
Thanks a lot in advance
Hi, I have similar issues with internal storage after flashing to 4.2.2 and also 4.1.2. Model is galaxy W previously 2.3.6 stock.
At root, i have
/data, which seems to be my internal storage as the FX file explorer show it has a storage of 1.07gb
/external_sd, which contains my files in micro sd card
/sdcard, which ES say SDCard unmounted
/storage, which contains sdcard0 (SDCard unmounted), sdcard1 (micro sd), usbdisk (SDCard unmounted)
In the andriod settings > storage, I can see internal storage with total space 1.07gb, but unable to mount it.
My camera and gallery says "No external storage available".
What should I do? Please help
Have You Try To Change Your Rom?!
ElGzzar said:
Have You Try To Change Your Rom?!
Click to expand...
Click to collapse
Hi, yes actually i did. I've tried 4.2.2, 4.1.2, then 4.0.4. All gave me the same problem.
lennnostra said:
Hi, yes actually i did. I've tried 4.2.2, 4.1.2, then 4.0.4. All gave me the same problem.
Click to expand...
Click to collapse
Try To Format Your SD On Your PC With FAT32 Mod?!
Then Try 10.1 (4.2.2) Rom
Done :good:
ElGzzar said:
Try To Format Your SD On Your PC With FAT32 Mod?!
Then Try 10.1 (4.2.2) Rom
Done :good:
Click to expand...
Click to collapse
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.
honeyx said:
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.
Click to expand...
Click to collapse
If The Internal Is The Problem Then You Must Back To The Main Software 2.x.x
Then Back To The Edited Mods And Rom's
The Internal Storage Will Work
...............................
When That Happen To Me ... That What I Have Done
Sorry For Bad English
Over :good:
ElGzzar said:
If The Internal Is The Problem Then You Must Back To The Main Software 2.x.x
Then Back To The Edited Mods And Rom's
The Internal Storage Will Work
...............................
When That Happen To Me ... That What I Have Done
Sorry For Bad English
Over :good:
Click to expand...
Click to collapse
You probably mean back to stock Samsung ROM. But how will this fix corrupted partitions? And why "must" if there are probably more simple ways to fix it rather than flashing roms forth and back?
First of all he should format both and switch to Mass Storage mode to see if this fixes his issue. Flashing ROMs still can be tryied as a last resort.
honeyx said:
You probably mean back to stock Samsung ROM. But how will this fix corrupted partitions? And why "must" if there are probably more simple ways to fix it rather than flashing roms forth and back?
First of all he should format both and switch to Mass Storage mode to see if this fixes his issue. Flashing ROMs still can be tryied as a last resort.
Click to expand...
Click to collapse
Yeah I Mean (back to stock Samsung ROM) And That This Makes The Phone Due To His Condition Also Came From Its Supplier ..
And That's Fix All Internal Storage Problem's .... By Format The Internal Storage With Force From stock Samsung ROM ...
And I Think He Can't access The Internal Storage To Format It By Him Self ...
I Have Tried That Problem Whin I Have Got My Mobile New .. I Haven't Found Solve For It , So I Have Back To The stock Samsung ROM
..
And Found Every Thing Work Fine Then I Have Back To CM Mod Again... :victory:
If You Have Another Simple Way For That Problem Tell Him ,Please ...
Over :good:
ElGzzar said:
Yeah I Mean (back to stock Samsung ROM) And That This Makes The Phone Due To His Condition Also Came From Its Supplier ..
And That's Fix All Internal Storage Problem's .... By Format The Internal Storage With Force From stock Samsung ROM ...
And I Think He Can't access The Internal Storage To Format It By Him Self ...
I Have Tried That Problem Whin I Have Got My Mobile New .. I Haven't Found Solve For It , So I Have Back To The stock Samsung ROM
..
And Found Every Thing Work Fine Then I Have Back To CM Mod Again... :victory:
If You Have Another Simple Way For That Problem Tell Him ,Please ...
Over :good:
Click to expand...
Click to collapse
I think you are mixing something up. First of all he didn´t say he can´t mount / access it from CWM Recovery but from a running ROM. This is two different things so it still should be possible to access both in CWM Recovery and to do a format.
Secound. Flashing a ROM will not format the internal Storage but only the partition where the ROM will be flashed to. They are not the same, so this is also two different things. So even if you flash a ROM but are having corrupted SDcards (Internal and external) they will stay corrupted till you fix this.
And this is why I suggested to first boot into RECOVERY, format both and finally after rebooting change to Mass Storage as the MTP Mode is not always working very well. If this doesn´t help he still can flash back to stock ROM.
However now I´m just repeating what I already said before. If you can´t get it, then I´m sorry for you.
honeyx said:
I think you are mixing something up. First of all he didn´t say he can´t mount / access it from CWM Recovery but from a running ROM. This is two different things so it still should be possible to access both in CWM Recovery and to do a format.
Secound. Flashing a ROM will not format the internal Storage but only the partition where the ROM will be flashed to. They are not the same, so this is also two different things. So even if you flash a ROM but are having corrupted SDcards (Internal and external) they will stay corrupted till you fix this.
And this is why I suggested to first boot into RECOVERY, format both and finally after rebooting change to Mass Storage as the MTP Mode is not always working very well. If this doesn´t help he still can flash back to stock ROM.
However now I´m just repeating what I already said before. If you can´t get it, then I´m sorry for you.
Click to expand...
Click to collapse
Yeah Yeah I See Now Thank's For Teaching Me .. :victory:
And I'm Sorry That is My Missd
Sorry For Bad English ToO ..
Over XD
Thanks
honeyx said:
This can be done for the SDcard you can unplug and plug directly to an other device like an PC, but not with the internal.
So better try the following. Secure your files if you can. Reboot into recovery and format there both. Rebooot into CM10 or whatever ROM you are using and change your USB operation mode from MTP to Mass Storage.
Click to expand...
Click to collapse
Thanks man,
your knowledge regarding this issue immediately solved my problem. My girlfriend's very happy now
Maybe I ll get lucky tonight Just kidding, I get lucky whenever I want
Greetings,
Max

Categories

Resources