Related
Hi! all. need to know how to partition SD Card for Desire. Any tutorials i can follow?
wolvie77 said:
Hi! all. need to know how to partition SD Card for Desire. Any tutorials i can follow?
Click to expand...
Click to collapse
You can use ROM Manager from the Android Market and there's an option to Partition SD Card under utilities, just install the recovery first and it will work fine.
Also you can use AM Recovery fake-flash to avoid installing ClockworkMod Recovery, but it's easier using ROM Manager
But if you are running Linux on any computer, then you can use GParted to Partition the SD Card, ask if you want steps to use GParted
shoey-n said:
You can use ROM Manager from the Android Market and there's an option to Partition SD Card under utilities, just install the recovery first and it will work fine.
Also you can use AM Recovery fake-flash to avoid installing ClockworkMod Recovery, but it's easier using ROM Manager
But if you are running Linux on any computer, then you can use GParted to Partition the SD Card, ask if you want steps to use GParted
Click to expand...
Click to collapse
Any chance we could have the GParted steps, I tried using it for creating the partitions (FAT32 then Ext2) and no matter what I did I got a Damaged SD error upon remounting it in the Desire.
I'm starting to think my card is bad!
Not in front of Linux right now, so this is off the top of my head. I'll post in the morning clear steps (better if used in card reader not using USB toggle on device)
Backup what ever is on your card first!
In the top right corner of GParted select your device and let it search for partitions on card
Unmount all partitions by right clicking on each partition and clicking unmount
Then delete those partitions by right clicking and selecting delete
(I normally apply those changes before proceeding by clicking the green tick, to make sure the partitions have cleared)
With the unpartitioned space, firstly create your FAT32 partition by right clicking and selecting FORMAT TO then FAT32 (MAKE SURE REMAINING SPACE IS IN FOLLOWING NOT PRECEEDING) then with the remaining space create your EXT2 partition exactly the same but obviously format to EXT2 and you could even add a small 32MB linux-swap partition but it's not necessary
Then apply the changes, if everything goes successfully and you are still getting remount errors, then try reflashing your ROM or a different ROM
(I'm assuming your rooted)
If you still have no luck, then your card is bad
I just found out that Clockwork can only handle ext3 partitions - at least my version (2.0.1.4). If I create partitions using ROM Manager, it creates a ext2-partition. Only after I changed it to ext3 using linux I could mount the partition in Clockwork and perform wipes and backups.
Don't know if or what I did wrong, but it certainly didn't work for me (tried with multiple versions of clockwork and several times).
shoey-n said:
You can use ROM Manager from the Android Market and there's an option to Partition SD Card under utilities, just install the recovery first and it will work fine.
d
Click to expand...
Click to collapse
Even after doing that, everything in the rom manager is dimmed. I mean only the flash clockworkmod recovery and the reboot into recovery are highlighted. Is there somethin'g I missed?
jondalar said:
Even after doing that, everything in the rom manager is dimmed. I mean only the flash clockworkmod recovery and the reboot into recovery are highlighted. Is there somethin'g I missed?
Click to expand...
Click to collapse
is your phone rooted or not?
wolvie77 said:
Hi! all. need to know how to partition SD Card for Desire. Any tutorials i can follow?
Click to expand...
Click to collapse
Introductory Remarks:
- Ext Partition is only needed if your rom uses App2SD+ (Froyo app2sd works with basic Fat32 partition)
- Ext partitions are only visible in Linux = Windows can't see it.
- You can check if you have a working ext partition with Quick system info (in app market)
- On first reboot after partition, android will move some apps to the SD, this will take a lot of time. Some people have reported a bootloop on green HTC Screen, one reported a need to Battery pull 4 times before it finally worked), so be patient!!!!
Now the tutorials:
Easiest way is to install Rom Manager:
1) install rom manager
2) choose partition sd card
- 512mb ext
- 0 swap
3) let RM do the rest... ;-)
Another one is using Gparted:
(copied this from http://wiki.cyanogenmod.com/index.php?title=Apps2SD)
For a great Linux GUI alternative, use Linux 'GParted' a GUI based partition editor. (Designed for and found standard in the GNOME desktop environment, but can also easily be install in other desktop managers such as KDE and others.) Backup your SD card before you start ! The following steps will wipe the contents !
You can use a livecd of GParted, or use it from within Ubuntu (vid: http://www.youtube.com/watch?v=sVK-tJe8pXE&feature=related)
1) Connect your phone to your computer (or use an SD Card adapter...., in this case skip to 4))
2) Pull down the notification bar and mount the phone
3) Start Gparted
4) Gparted will search available drives. (Your phone should show up as a USB drive, and will be something like /dev/sdb1 or /dev/sdc1, etc..)
Warning: double-check you've not selected a hdd by mistake!
5) In the upper right corner, select the correct USB device for your phone. (i.e. check to make sure it is correct size for your SD card)
6) Right click on each partition and select 'unmount'
7) Right click on each partition and select 'delete'
If you know what you are doing, you can re-size the partitions and add a new 2nd partition formatted as ext2/3/4
8) Right click on the big gray bar (should say unallocated x.xx gb) and click 'new'
9) Enter configurations
Free Space preceding = 0
Create as = Primary
New size = [don't touch]
File system = fat32
Free Space Following = 512 (or whatever you want)
10) Click add
11) Right click on the big gray bar (should say unallocated x.xx gb) and click 'new'
12) Enter configurations
Free Space preceding = 0
Create as = Primary
New size = [don't touch]
File system = ext2/3/4 (recommend ext4)
Free Space Following = 0 (or ~32 if you want swap)
Click add
13) Click edit, then 'Apply All Operations' to write changes to disk
14) Quit GParted
15) Unmount your SD Card
16) Reboot your phone
This is what I've found so far, as the easiest method.
Another tutorial can be found under: http://androidcommunity.com/forums/f9/how-to-create-ext2-partition-14232/
or
http://forum.xda-developers.com/showthread.php?t=534714 this is one way to do it.
What I don't know for sure:
- If the size of the ext partition matters?
- What ROMs require ext partitions?
- If Class 6 SD cards really are that important (some webpages say that class 2 cards are not able to handle ext2 partitions and end up bricked.
- How to manage the contents in the ext partition when changing SD Cards...
- How to check if you bricked your sd card...
- etc...
Good Luck
chrysochire said:
What I don't know for sure:
- If the size of the ext partition matters?
- What ROMs require ext partitions?
- If Class 6 SD cards really are that important (some webpages say that class 2 cards are not able to handle ext2 partitions and end up bricked.
- How to manage the contents in the ext partition when changing SD Cards...
- How to check if you bricked your sd card...
- etc...
Good Luck
Click to expand...
Click to collapse
By the way, if anyone reads this, I would love to make this topic a sticky, so as to answer all questions related to SD Cards...
chrysochire said:
CUT.....
Good Luck
Click to expand...
Click to collapse
Very nice guide. Thanks soo much for this explain.
Very cleary!
hi i am using GParted to partition ext3 for use with apps2d but i have tried several times without success
after booting up the phone, i see a blank sd card.. i.e. not mounted in my Desire..
wondering what i m doing wrong,, or is there another method to do it?
From the Clockwork Mod recovery, I cant partition the sd card too.. and have also tried without any success via the ROM Manager...
Warning! Noob question ahead:
Why wouldn't you just take the new SD card, insert it into the phone without partitioning it, and let the Desire handle the whole thing?
I'm completely new to all this (rooting, custom ROMs, A2SD etc.) but have managed to successfully root my HTC Desire (using unrevoked), install OpenDesire 2.3, and partition the SD card using ROM Manager. I rebooted and my installed apps are showing as being on the SD card in Settings > Applications > Manage Applications but with different names (e.g. instead of 'Titanium Backup' it's now 'com.keramidas.TitaniumBackup') and the icon is a default black Android/SD card rather than the app icon. When I go into the launcher my installed apps aren't there and they're not listed when I try to add a shortcut to the homescreen.
Have I done something wrong? Or is there an additional step I don't know about?
Ah, it looks like I did something in the wrong order - I'd already downloaded and installed Titanium, then moved it to the SD card under Froyo A2SD, then partitioned the SD card...
I reinstalled Titanium and everything's fine.
I am still interested in that:
mysteryfr said:
Why wouldn't you just take the new SD card, insert it into the phone without partitioning it, and let the Desire handle the whole thing?
Click to expand...
Click to collapse
Hi Guys,
I need some serious help. I have rooted the desire, flashed to leedroid 1.4c rom, but have been left with no SD Card and now I am trying to mount the sd card in the desire as it no longer recognises it...
i can have rom manager loaded but it can't see the sd card..
i dont have A2SD or partitions on the sd card, i can put the card in the laptop and write to it..problem is i am on a windows lappy so no linux..i know i can make a live cd but i'm not up to that..i dont think..
is there a guide i can have to get the sd card mounted on the desire running windows...i have got android sdk on the pc but i have nfi how to use that either...
all help appreciated...
XClemX Try this: (hopefully you've backed up your SD card to your PC!)
go to Settings, Sd & Phone storage,
click on format SC card.
That should get your card recognised.
Thanks Depaor,
The SD card isn't seen in that either...i'm attempting to make a gold card now to see if i can get it to work that way...fingers crossed...
is your card visible from card reader on pc, or from other phone?
If it is, just format it in FAT32 on your pc, and it will be fine... also, always check if phone is in "charge only" mode before disconnecting usb...
Will a non-rooted Android phone read a card formatted as ext3 or ext4? Just curious.
How to partition your SD Card for us Newbies.
how can i do that? Ext2 , Ext3
i have a 8 gb sd card class 6. someone guide me please with a link
Thnx
acronis disk manager can do that but the card wouldnt boot in my phone, so i used the phones internal boot up manager to do it, unlocker.com has a video guide. i only been doing this my self passed 3 days and its been really confusing so good luck
Page 2 of the Q&A Forum
oMaRcO said:
How to partition your SD Card for us Newbies.
Thnx
Click to expand...
Click to collapse
Introductory Remarks:
- Ext Partition is only needed if your rom uses App2SD+ (Froyo app2sd works with basic Fat32 partition)
- "Install apps to sd" (ext) must sometimes be configured in your ROM, check the thread for your rom for infos...
- Backup your SD card before you start ! The following steps will wipe the contents !
- Ext partitions are only visible in Linux = Windows can't see it.
- Swap Partitions are no longer useful.
- You can check if you have a working ext partition with Quick system info (in app market)
- On first reboot after partition, android will move some apps to the SD, this will take a lot of time. Some people have reported a bootloop on green HTC Screen, one reported a need to Battery pull 4 times before it finally worked), so be patient!!!!
- If the device is plugged into a PC when you try to boot with the partitioned SDCard it never gets past the white HTC sceen & logo.
Now the tutorials:
A. Easiest way is to install Rom Manager:
1) install rom manager
2) choose partition sd card
- 512mb ext
- 0 swap
3) let RM do the rest... ;-)
- I believe Rom Manager (as of end of July) creates an ext2 partition, therefore if you want ext3 or 4, easiest is to go through Gparted, or if you have amonRa Recovery, I believe this function is present.
B. Another one is using Gparted:
(copied this from http://wiki.cyanogenmod.com/index.php?title=Apps2SD)
You can use a livecd of GParted, or use it from within Ubuntu (vid: http://www.youtube.com/watch?v=sVK-t...eature=related)
+ You can do this using your phone to mount the SD card or a Card adapter directly connected to your computer.
1) Connect your phone to your computer (or use an SD Card adapter...., in this case skip to 4))
2) Pull down the notification bar and mount the phone
3) Start Gparted
4) Gparted will search available drives. (Your phone should show up as a USB drive, and will be something like /dev/sdb1 or /dev/sdc1, etc..)
Warning: double-check you've not selected a hdd by mistake!
5) In the upper right corner, select the correct USB device for your phone. (i.e. check to make sure it is correct size for your SD card)
6) Right click on each partition and select 'unmount'
7) Right click on each partition and select 'delete'
If you know what you are doing, you can re-size the partitions and add a new 2nd partition formatted as ext2/3/4
8) Right click on the big gray bar (should say unallocated x.xx gb) and click 'new'
9) Enter configurations
Free Space preceding = 0
Create as = Primary
New size = [don't touch]
File system = fat32
Free Space Following = 512 (or whatever you want)
10) Click add
11) Right click on the big gray bar (should say unallocated x.xx gb) and click 'new'
12) Enter configurations
Free Space preceding = 0
Create as = Primary
New size = [don't touch]
File system = ext3 or 4 (recommend ext4)
Free Space Following = 0
Click add
13) [CHECK AGAIN you are working on your SD card and not your Hard Drive!!!!] Click edit, then 'Apply All Operations' to write changes to disk
14) Quit GParted
15) Unmount your SD Card
16) Reboot your phone and wait (see introductory remarks)
C. Recovery Images
Some Recovery Images also have a option to format your SD card from the recovery screen. (see http://forum.xda-developers.com/showthread.php?t=721792).
I have not tried that.
As long as you have an ext2/3/4 partition and the ROM you're flashing has A2SD support (check before you download the ROM), you are not required to do anything more.
D. How to check if it worked?
To check whether A2SD is working once you've flashed your ROM,
1)Download Quick System Info from the Market, and check under A2SD Storage, it should give you enough informations.
2)download the Android Terminal Emulator app from the market and use the following commands
Code:
su
ls -l /data
You should see your app directory pointing to /system/sd/app and app-private pointing to /system/sd/app-private (courtesy of ikkokusenkin)
E. Further Infos
See: http://geeks.pirillo.com/profiles/blogs/how-to-partition-an-sd-card or :
http://androidcommunity.com/forums/f...rtition-14232/ or:
http://theunlockr.com/2009/10/15/ho...-android-when-using-swap-hero-and-or-apps2sd/ (With Rav Recovery...) or:
http://forum.xda-developers.com/showthread.php?t=534714 (most complicated way.... )
related thread: http://forum.xda-developers.com/showthread.php?t=731432&page=2
F. Open Questions:
What I don't know:
- If the size of the ext partition matters (if you have to choose 256/512 or 1024, and can't have 600mb for example?
- What ROMs require ext partitions? (all with app2sd+, basic froyo app2sd doesn't require ext partition).
- If Class 6 SD cards really are that important (some webpages say that class 2 cards are not able to handle ext2 partitions and end up bricked.
- How to manage the contents in the ext partition when changing SD Cards... (do you need any management of your ext partition?) or you have to reinstall those apps????) See here.
- How to check if you bricked your sd card...
- etc...
Good Luck
Use Rom Manager
Completely painless, took less that 2 mins to do mine
PS - It may appear to stuck at the HTC white screen after completion, I just left it and
it booted up normally after about 3 mins
50 apps installed and 132MB spare!!
The first time round the Rom manager worked for me. But I again formatted the card thinking i had not followed the right partitioning so i tried again but i get stuck on a black screen with SU request written forever which needs to be force closed.
Please advise. thanks
I recently bought a 32gb sandisk and want to get that working heres what I have done with no luck:
I inserted the new memory card and it picked up fine on the phone then I went to rom manager to partition the card, 512mb and 0 swap it reboots but only stays in clockwork mod, from here I dont know what to do.
If I connect the phone to the computer with the card mounted it displays the card as raw not fat32 but music files drag and drop and easily play.
I could format it from the computer to fat32 but I'll wait and see what you guys say.
Chan_B said:
I recently bought a 32gb sandisk and want to get that working heres what I have done with no luck:
I inserted the new memory card and it picked up fine on the phone then I went to rom manager to partition the card, 512mb and 0 swap it reboots but only stays in clockwork mod, from here I dont know what to do.
If I connect the phone to the computer with the card mounted it displays the card as raw not fat32 but music files drag and drop and easily play.
I could format it from the computer to fat32 but I'll wait and see what you guys say.
Click to expand...
Click to collapse
Try to format the card back to fat32 using:
http://panasonic.jp/support/global/cs/sd/download/index.html
Then check out the Windows way of using parted to partition
http://androidandme.com/2009/08/news/how-to-manually-partition-your-sd-card-for-android-apps2sd/
After partitioning I use clockworkmod to upgrade ext2 to 3.
And you can't always set a linux swap of 0 so calculate 1MB for that part.
I got it to fat32 but then the windows way of using parted to partition seems difficult. How can I tell if I have partitioned my card successfully? How can I partition using clockworkmod only, when I go to partitions menu it only says mount or format, this is frustrating...
Chan_B said:
I got it to fat32 but then the windows way of using parted to partition seems difficult. How can I tell if I have partitioned my card successfully? How can I partition using clockworkmod only, when I go to partitions menu it only says mount or format, this is frustrating...
Click to expand...
Click to collapse
gparted has a live cd to partition your sd card
http://gparted.sourceforge.net/download.php
Hi, i see you all set swap as 0 does that mean its using phone internal storage as swap how fast is read/write of phone ram ? i have class2 32gb card i used the phone boot with the r5 windows.bat to get into it and i set 256 swap/512 ext2/ rest 32bit all seems to work fine.
i note that writing to the sd card is about 2MBps and read is 10MBps.
i have a class4 8gb that writes at 10MBps reads about 17MBps i have had both in the phone and i cant say that i notice lag on the 32GB but i havent had it more than a few days and coming from xda orbit its a big difference.
if i use the card as storage the phone becomes very lag but maybe thats cause in that mode it would have no swap file? might change that when i finally flash to froyo.
gparted kept saying it was unformatted when windows said it was formatted so i gave up with it.
gianton said:
gparted has a live cd to partition your sd card
Click to expand...
Click to collapse
Thanks, but I think I sorted it. Fingers crossed.
Just rooted my htc desire and used rom manager to partition my sd card (the one I got when I bought the phone). Everything fine.
then I bought a new Transcend micro sdhc 8GB... this memory card is not recognize by windows if using card reader. So..:
- I inserted into blackberry and connected using usb cable. My windows (Windows xp) can see and access it.
- formatted the new memory card to Fat32
- copy Open Desire and and Official Sense Froyo ROMs, both by Adam
- flashed to Sense Froyo ROM, and when it rebooted, it freezed.. cant get into the system
- flashed to OpenDesire, it worked.
- Download ROM Manager
- choose "Partition SD Card"
- Swap 0, Ext 512mb
- ERROR...
what should I do?
Did you download Clockworkmod recovery through ROM Manager before that?
If you create a partition using rom manager do you lose all your apps and settings that you already have in use.
thanks
jankos said:
Did you download Clockworkmod recovery through ROM Manager before that?
Click to expand...
Click to collapse
yes.. cos when i clicked partition sd card, it asked me to download clockworkmod first.
it goes to recovery screen but with "unsucsessfull" message. cant find sdcard/cache/update.zip ...
the funny thing is, if I copied update.zip from my old memory card into new one. and run update.zip from recovery screen... then it worked.
but when I checked with quick system info, app2sd only shows around 400mb. is that rite?
aoisora said:
yes.. cos when i clicked partition sd card, it asked me to download clockworkmod first.
it goes to recovery screen but with "unsucsessfull" message. cant find sdcard/cache/update.zip ...
the funny thing is, if I copied update.zip from my old memory card into new one. and run update.zip from recovery screen... then it worked.
but when I checked with quick system info, app2sd only shows around 400mb. is that rite?
Click to expand...
Click to collapse
Its showing around 400mb for me aswell, but how exactly can I tell if it is working. If I go to manage applications and click on sd card I have a couple that I moved over i.e rom manager but some apps are unmovable to sd card. Are these apps unmovable by design. I hope I haven't done it wrong.
BTW neophyte is the best rom I've used yet.
I made partition with Rom Manager.
Do I need now to "swap" ext2 to ext3?
If so, how do I do it?!
mattan said:
I made partition with Rom Manager.
Do I need now to "swap" ext2 to ext3?
If so, how do I do it?!
Click to expand...
Click to collapse
I think rom manager does that as ext3.
mattan said:
I made partition with Rom Manager.
Do I need now to "swap" ext2 to ext3?
If so, how do I do it?!
Click to expand...
Click to collapse
ROM Manager makes directly ext3 format. Do not worry about that
jankos said:
ROM Manager makes directly ext3 format. Do not worry about that
Click to expand...
Click to collapse
No it doesn't it makes a ext2 partition, you have to format to ext3... I have used gparted live cd to do this.
Sent from my HTC Desire using XDA App
I know this must sound like a super-noob question, but there's a simple reason for that : it is from one.
I have run out of space on my 8 GB card so I am thinking of upgrading to a bigger card. Here are my questions:
1) If App2SD+ is there on the ROM, does the phone ask you where to install the app or it goes automagically into EXT partition?
2) I want to make a bigger partition in a bigger card and will do it via ROM Manager. Do I just copy the contents of the older card and paste it onto newer and everything will work fine?
Please answer, my life depends on it.
talhamid said:
I know this must sound like a super-noob question, but there's a simple reason for that : it is from one.
I have run out of space on my 8 GB card so I am thinking of upgrading to a bigger card. Here are my questions:
1) If App2SD+ is there on the ROM, does the phone ask you where to install the app or it goes automagically into EXT partition?
2) I want to make a bigger partition in a bigger card and will do it via ROM Manager. Do I just copy the contents of the older card and paste it onto newer and everything will work fine?
Please answer, my life depends on it.
Click to expand...
Click to collapse
I just upgraded from 8 to 16 myself. 1 : automatically, 2: yes that worked for me
best thing is to pre partition the card before putting it in your phone, do a nandroid backup with your old card in, put the new one in and restore, if im not mistaken this deals with the ext partition files and then just copy all the files onto the fat32 partition from your old card
not worked for me ,I was copy to PC old cadr,have nandroid but I have A2SD+ ext part
& problems ..stock with HTC white logo ,after that I make full wipe/factory reset
& after that instal the LeeDroid rom /put again ROM manager & make ext 3 partition/
after that Titanium backup & Desire functionality was back again
hi there i have auraxtsense rom and and i have an old sd card with app2sd i bought a new card for my desire 8gb class6, and my phone stuck on htc logo screen when i put new card inside
As said above you must re-partition your new card first!
I have just done this yesterday so this is what I did:
1. Nandroid backup
2. Create EXT partition on new card with G-parted Live
3. Copy contents of old SD card to the new one (just the FAT partition visible in windows etc)
4. Put the new SD card in the phone and boot into recovery
5. Restore nandroid backup (copies all the apps back onto the EXT partition)
6. Reboot!
I can't see how you could have any problems by doing what I did. The phone will not have any problems as all the old files are exactly as they were.
Phil
how to create ext partition with gparted?
You must first resize the FAT partition and then create a new EXT partition in the newly created space.
This may be helpful as there are some pictures:
http://www.howtoforge.com/partitioning_with_gparted
Hope that helps.
Phil
philje123 said:
As said above you must re-partition your new card first!
I have just done this yesterday so this is what I did:
1. Nandroid backup
2. Create EXT partition on new card with G-parted Live
3. Copy contents of old SD card to the new one (just the FAT partition visible in windows etc)
4. Put the new SD card in the phone and boot into recovery
5. Restore nandroid backup (copies all the apps back onto the EXT partition)
6. Reboot!
I can't see how you could have any problems by doing what I did. The phone will not have any problems as all the old files are exactly as they were.
Phil
Click to expand...
Click to collapse
So the Nandroid backup is not saved on to the SD Card?
EDIT: Ignore this. Wanted to know if it was on the FAT or ext3. I'm guessing on the FAT so nandroid backups would be included in the transfer.
What is the best tool for copy the entire contents of a memory card? I know Windows is a bit funny, stops the whole process if it finds an error, for example
Yes if you copy the files over before the nandroid then the nandroid backup is included.
TBH I just used windows to copy them all and had no problems.
Phil
One question - can the ext partitions have different sizes when restoring with nandroid?
Example - I have 1 GB ext on old card and now I'd like to have 2 GB?
KotDroid said:
One question - can the ext partitions have different sizes when restoring with nandroid?
Example - I have 1 GB ext on old card and now I'd like to have 2 GB?
Click to expand...
Click to collapse
Don't go larger then 1.5GB on a ext partition. Nandroid restore doesn't mind if the partition size changed, until the restored size is smaller then the new capacity.
KotDroid said:
One question - can the ext partitions have different sizes when restoring with nandroid?
Example - I have 1 GB ext on old card and now I'd like to have 2 GB?
Click to expand...
Click to collapse
You sure can, I just did it today, old ext2 w/ 512MB on 2GB card, now 2GB ext3 on 8GB card. Working just fine
mistake37 said:
You sure can, I just did it today, old ext2 w/ 512MB on 2GB card, now 2GB ext3 on 8GB card. Working just fine
Click to expand...
Click to collapse
I didn't say you can't, I stated that it's not recommended by the community to go more then 1.5GB. It was in all a2sd how-to's I've seen, has to be something about errors with the Market and app installing.
From what I understand the only advantages to APP2SD+ is that you can plug you can mount your card via USB and use your apps, and widgets can be installed on the SD.
Source
This doesn't seem worth it for all the work reformatting another partition. If your card is upgraded to a bigger size why not use the normal method of installing apps on your SD? Why bother to partition with Ext+ as well?
dimeotane said:
Why bother to partition with Ext+ as well?
Click to expand...
Click to collapse
Hmm, because it is what custom ROM requires?
thed0g said:
I didn't say you can't, I stated that it's not recommended by the community to go more then 1.5GB. It was in all a2sd how-to's I've seen, has to be something about errors with the Market and app installing.
Click to expand...
Click to collapse
It's actually bigger than 2gb
Sent from my HTC Desire using XDA App
thed0g said:
I didn't say you can't, I stated that it's not recommended by the community to go more then 1.5GB. It was in all a2sd how-to's I've seen, has to be something about errors with the Market and app installing.
Click to expand...
Click to collapse
I didn't quote your post
On a rooted HTC Desire I installed the XDA rom: “LeeDrOiD V2.0 (30/08 l Official 2.2 l FAST l STABLE l OPTIONAL A2SD+)”.
I need to create on the SD Card (of 16GB) a partition EXT3.
I have used Quick System Info Pro and A2SC storage to check and it displays “Information not available”.
I have installed on HTC the utility “Rom Manager” in order to try to create the EXT type partition.
When I am trying to format with Rom Manager the software does not ask me what type of partition to create (EXT2 or EXT3), but only what size to have and the size of swap.
Can you help me by giving advice on how to create the EXT3 partition?
Thank you in advance.
Rom manager creates ext3 partitions.
Lennyuk said:
Rom manager creates ext3 partitions.
Click to expand...
Click to collapse
I partitioned with Rom Manager my sd card with Ext size=512MB and swap=0.
After that, again, Quick System Info Pro say, at <A2SD storage> : “Information not available”.
??
(sorry for my english)
Did you reboot your phone once done?
I am stuck in the same position, in Rom manager I select the size and swap and then it reboots. It now goes straight to a diagram of an exclamation mark in a white triangle and an Android bot. I waited for 15 minutes and nothing happens. Here I press the oj and there is some information stating that there is some problem with the update.zip. SOMEBODY PLEASE HELP!
EddyOS said:
Did you reboot your phone once done?
Click to expand...
Click to collapse
Yes.
And... exact like <David0123> !
Same thing here
I'm just gonna chime in and say I'm having the same issue here when trying to create the partition using rom manager.
I ended up creating the partition using gparted on my linux box, but after copying all the files back to my fat32 partition, and rebooting my phone it no longer recognizes the applications installed to sd using froyo a2sd. (I have not installed old school a2sd yet as it is not compatible with the version of CM I'm using... waiting for 6.1)
Is there a reason the phone wouldn't see the files for the applications? I created my fat32 partition first, then an ext3 with the remainder.
Is it possible to create a 1gb ext partition using ROM Manager?
Hi.
I have an HTC Desire (T-Mobile UK) usng the Pinky Desre 1.8 rom. I have ROM Manager Premium installed, but this only allows upto 512mb for an ext partition.
I have a 8gb MicroSD card and would liike to create a 1gb ext2/3/4 partiton.
Does anyone have any nfo on how I can do this (assumng that ts possible of course)
Thanks in advance
killawatts said:
I'm just gonna chime in and say I'm having the same issue here when trying to create the partition using rom manager.
I ended up creating the partition using gparted on my linux box, but after copying all the files back to my fat32 partition, and rebooting my phone it no longer recognizes the applications installed to sd using froyo a2sd. (I have not installed old school a2sd yet as it is not compatible with the version of CM I'm using... waiting for 6.1)
Is there a reason the phone wouldn't see the files for the applications? I created my fat32 partition first, then an ext3 with the remainder.
Click to expand...
Click to collapse
Have you tried
- moving all the apps on the SD back to the phone
- Do a backup i.e. Titanium
- Reboot phone
- Create partition using ROM Manager
- Re-install apps \ Move to SD
I haven't tried ths, but thinking logically, it should work
vybztymz said:
Have you tried
- moving all the apps on the SD back to the phone
- Do a backup i.e. Titanium
- Reboot phone
- Create partition using ROM Manager
- Re-install apps \ Move to SD
I haven't tried ths, but thinking logically, it should work
Click to expand...
Click to collapse
I have 16mb of available space on my phone with every application possible moved to the sd card so moving them back is out of the question. I guess I could always just do an brainapp sync for my free apps and re-install the rest from .apk. I'm thinking now I'll hold off until I get a class 6 to make the ext partition.
vybztymz said:
Hi.
I have an HTC Desire (T-Mobile UK) usng the Pinky Desre 1.8 rom. I have ROM Manager Premium installed, but this only allows upto 512mb for an ext partition.
I have a 8gb MicroSD card and would liike to create a 1gb ext2/3/4 partiton.
Does anyone have any nfo on how I can do this (assumng that ts possible of course)
Thanks in advance
Click to expand...
Click to collapse
Amon-Ra lets you make bigger partitions that Recovery Manager/ClockWorkMod
There is a way to do this via ADB I believe as well, or a linux partition manager like GParted.
Lennyuk said:
Amon-Ra lets you make bigger partitions that Recovery Manager/ClockWorkMod
There is a way to do this via ADB I believe as well, or a linux partition manager like GParted.
Click to expand...
Click to collapse
Thanks for the tip.
I'm checking the forums on Amon-Ra....need to know a few things i.e. can it be installed \ work with CW; does CW need to be uninstalled etc)
Will try the Linux G-Parted route as well.
Thanks
vybztymz said:
Thanks for the tip.
I'm checking the forums on Amon-Ra....need to know a few things i.e. can it be installed \ work with CW; does CW need to be uninstalled etc)
Will try the Linux G-Parted route as well.
Thanks
Click to expand...
Click to collapse
How mine is set up
Use Unrevoked to install Amon-Ra (that way if you enter recovery via HBOOT you go to Amon-Ra
Then keep RomManager installed, if you need to do anything via clockworkmod you can do it via this app, which "fake flashes" the recovery for its purposes, however still leaves Amon-Ra as its permanent recovery.
Lennyuk said:
How mine is set up
Use Unrevoked to install Amon-Ra (that way if you enter recovery via HBOOT you go to Amon-Ra
Then keep RomManager installed, if you need to do anything via clockworkmod you can do it via this app, which "fake flashes" the recovery for its purposes, however still leaves Amon-Ra as its permanent recovery.
Click to expand...
Click to collapse
Thanks again....
I rooted using Unrevoked via Slax, and just want to ask if usng Unrevoked again means I'll have to re-root...or can I just install Amon-Ra?
(apologies if this is a silly question)
My unanswered ROM Manager, SD Card Partition post looks like it belongs here
I rooted my dInc with UnRevoked & 4ever and am now running SkyRaider 3.0 Sense (seems stable & fast) and I see that there's an update available to SR Sense 3.1 RC3 - so I figure now might be a good time to use ROM Manager to create an Ext partition for Apps on my 16G Kingston Class 10 SD card - although, so far I've been using App2SD successfully w/o partitioning the card. What's the benefit? The ability to back up apps on the sd card?
Anyway, I did nandroid & Titanium backups and copied my entire card to a folder on my PC.
My first question is what size ext partition should I choose? (I do currently have a ton of apps - but will be paring down to a leaner machine with fewer redundant apps). Also, what swap size do you suggest?
2nd, when I copy from the PC's SD Card folder back SD Card, which files & folders go to the ext. partition? Just the moved apps?. Then, all the rest to the main partition?
Then, do I just mount the card in the phone and run the update with a full wipe?
I already have the Goodies installed but, will I want to d/l the newest kernel?
Lastly, which of Titaniums' batch restore scenarios is best to finish with? Missing Apps w/ data? All apps & system data?
I realize there are numerous ways to go on this but I'm hoping you folks have some experience you can share before I make any major changes to a phone that's really running pretty well.
Please keep in mind I'm working with ROM Manager and I haven't gotten into sdk, adb, emulation or overclocking - yet
Dartmouth70 said:
I rooted my dInc with UnRevoked & 4ever and am now running SkyRaider 3.0 Sense (seems stable & fast) and I see that there's an update available to SR Sense 3.1 RC3 - so I figure now might be a good time to use ROM Manager to create an Ext partition for Apps on my 16G Kingston Class 10 SD card - although, so far I've been using App2SD successfully w/o partitioning the card. What's the benefit? The ability to back up apps on the sd card?
Anyway, I did nandroid & Titanium backups and copied my entire card to a folder on my PC.
My first question is what size ext partition should I choose? (I do currently have a ton of apps - but will be paring down to a leaner machine with fewer redundant apps). Also, what swap size do you suggest?
2nd, when I copy from the PC's SD Card folder back SD Card, which files & folders go to the ext. partition? Just the moved apps?. Then, all the rest to the main partition?
Then, do I just mount the card in the phone and run the update with a full wipe?
I already have the Goodies installed but, will I want to d/l the newest kernel?
Lastly, which of Titaniums' batch restore scenarios is best to finish with? Missing Apps w/ data? All apps & system data?
I realize there are numerous ways to go on this but I'm hoping you folks have some experience you can share before I make any major changes to a phone that's really running pretty well.
Please keep in mind I'm working with ROM Manager and I haven't gotten into sdk, adb, emulation or overclocking - yet
Click to expand...
Click to collapse
(Q1) I have an 8gb sdcard and created a 1gb Ext2 partition using G-Parted (using Ubuntu 10.04 onmy thumb drive). You dont need to create SWAP. I did'nt use ROM Manager as it (a) totally wipes your sdcard and (b) it only allows for a 512mb partition. I still copied all my sdcard data to my NAS beforehand though....just in case
once I parttioned my sdcard,
I did a full wipe (incl. cache \ dalvic etc)
Installed custom ROM (Pinky Desire 1.8 – FRF91 Official Sense Release).
Then re-installed everything from scratch as, like you, was unsure how TB would restore my backups.
Then used TB to restore User apps w /Data. I figured that system apps were easier\safer to reconfigure manually
Once done, and tested - did an"all user apps+system data" backup with TB.
Booted into Recovery, and did Nandroid backup (and copied that to my NAS bos)
Dont worry about which apps go to the EXT partition. As I understand it, most free apps can be moved\installed to the SDCard; paid apps can only be moved\nstalled to sdcard if the developer has enabled it to do so. I use an app called App 2 SD - it dentifies which appa can be moved to sdcard.
I'm pretty sure that there are easier \ quicker ways, and that my way is over cautious, but it was useful in giving me a better understanding of Android.
I hope this helps.
Thanx for the feedback!
Sounds like about what I'll be doing - unless someone comes up with specific details on using ROM Manager.
What's particularly confusing is that even the apps that can be moved to the SD card only partially reside on the card.
Hi,
I bought a new 16Gb microsd hc card after installing the RCMixHD rom in order to give it a 2gb ext size.
Right now im using 8gb-512 ext3 goldcard.
Unfortunately when i put the 16gb in the device (after fat32 quick format)- the device doesnt load
Its HBOOT driver is recognized by windows but i cant get the device to load.
Any ideas?
Many thanks ahead.
rcmix installs part of the rom on the ext partition of sd card that is why the phone wont boot.
1. use a card reader to format your new card and copy the backup of your old card onto the new one (dont forget the rom which you wish to flash again, i suppose rcmix)
2. turn off your phone place in the new card
3. go into hboot, wipe everything and flash the rom
your rom should be working now with your new sd card
(Using this method will cause that you loose all the data that was previously on the phone, but personally i feel: New Card --> New Start and clean flash, that way you can ensure everything is working properly!)
RaymondErasmus said:
rcmix installs part of the rom on the ext partition of sd card that is why the phone wont boot.
1. use a card reader to format your new card and copy the backup of your old card onto the new one (dont forget the rom which you wish to flash again, i suppose rcmix)
2. turn off your phone place in the new card
3. go into hboot, wipe everything and flash the rom
your rom should be working now with your new sd card
(Using this method will cause that you loose all the data that was previously on the phone, but personally i feel: New Card --> New Start and clean flash, that way you can ensure everything is working properly!)
Click to expand...
Click to collapse
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!
Spitniv said:
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!
Click to expand...
Click to collapse
Or..
You can make a Nandroid backup with your old card inside, then partition the newcard with one Fat32 and one ext3 (for A2SD+), copy the folder "Clockworkmod" from the old card to new one, Insert new card, Goto Recovery, Nandroid restore all..
Should work.
Before doing this, make a Titanium backup too..
Spitniv said:
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!
Click to expand...
Click to collapse
yes partition before you flash the rom.
And to create the ext partition with the correct size:
You can use amonra to create the ext, clockworkmod 2.1.5.2 (or something one of the newer versions can also do this) --> these work from recovery
I used gParted (a bootable cd, is very useful), you could use fdisk too! With these tools create the ext partition after the fat32 partition otherwise windows will want to format the sd card. (I guess depends on what OS you are using) --> i would use one of these 2 as you have more control over the process