i am using sony smart wireless headset pro , everyday after shutting down the blue tooth and using it the next day the bluetooth does not play media audio even if i click in the bluetooth setting the check mark does not come, i have to unpair both devices and then repair , this works for some time but same happens again
prophet_in said:
i am using sony smart wireless headset pro , everyday after shutting down the blue tooth and using it the next day the bluetooth does not play media audio even if i click in the bluetooth setting the check mark does not come, i have to unpair both devices and then repair , this works for some time but same happens again
Click to expand...
Click to collapse
i m using with Mw600 and had the same problem , I had to do a factory reset to get this issue sorted.
factory reset to phone????
anyone pls help
anyone can help
prophet_in said:
anyone can help
Click to expand...
Click to collapse
yea please
bump!!
Related
Hi guys,
I'm trying this for a while now and can't figure out what's wrong. I can't connect my SE MW600 to my HOX over bluetooth. It worked great on my HTC Desire but just can't get it to connect..
Thnx in advance.
Sorry i can't help but I was looking at getting these to replace my old sony headset that plays up with my one x, so would be very interested in your thoughts on this headset using it with the one x (if you ever get it to work). Thanks.
I've been using this for a while, with great success.
I have been using my mw600 to play songs through my speakers, and phone calls ocassionally... there is some stutter once in a while but it works perfectly, never had pairing issues
flitjes said:
Hi guys,
I'm trying this for a while now and can't figure out what's wrong. I can't connect my SE MW600 to my HOX over bluetooth. It worked great on my HTC Desire but just can't get it to connect..
Thnx in advance.
Click to expand...
Click to collapse
Did you clear the past pairing on the mw600?
It can only connect to 3 devices at a time and i don't know if you can replace without reseting the headset.
Try turning it off, then holding the power button and call button to reset it, then try pairing with your phone.
I didnt have issues with mine.
fredfb said:
Did you clear the past pairing on the mw600?
It can only connect to 3 devices at a time and i don't know if you can replace without reseting the headset.
Try turning it off, then holding the power button and call button to reset it, then try pairing with your phone.
I didnt have issues with mine.
Click to expand...
Click to collapse
I had the same problem, doing this i could pair them up. Thanks.
it was working flawlessly but since yesterday as soon as i connect my bluetooth shows unknown call and the countdown starts i cannot disconnect , i have reinstalled all apps did factory reset on bluetooth but nothing
please please can anyone help
Don't update to 0.1.E.1.6
My emotion will going to explode soon the update 2013-05-21 (0.1.E.1.6) for Sony Wireless Headset Pro (MW1BTWHP) seriously super stupid! Only work phone audio and the media audio always disconnected!!!!!!
Don't download firmware from this link!
http://www.sonymobile.com/global-en/software/accessories/smart-wireless-headset-pro/
prophet_in said:
it was working flawlessly but since yesterday as soon as i connect my bluetooth shows unknown call and the countdown starts i cannot disconnect , i have reinstalled all apps did factory reset on bluetooth but nothing
please please can anyone help
Click to expand...
Click to collapse
I've had a similar problem with car bluetooth (radio sony). I am hoping some solution in this forum. Good luck
Hello guys!
I have been trying to make my bluetooth headset work with my phone (it actually worked many times with other roms and even the one that I'm using right now) the thing is that the headset pairs correctly but when I play music (it does actually detect the music control buttons on the headset) it plays it on the mobile speaker... I still don't know what it can be causing it so, what do you think I could do to fix it?
I have the same issue using my Vizio Bluetooth headset on a CM9 ROM. Not sure why this happens, as the sound works fine when paired with my ASUS Slider.
Solar.Plexus said:
I have the same issue using my Vizio Bluetooth headset on a CM9 ROM. Not sure why this happens, as the sound works fine when paired with my ASUS Slider.
Click to expand...
Click to collapse
I ha ve no problems with my Sony Ericsson mw 600
I have a Pioneer deck in the truck and I can easily connect via bluetooth and play music, however, I cannot hear the calls in or out. My note will connect but again, no sound. I have reset the deck and even cleared the bluetooth cache/data to no avail. Anyone ever had this issue/resolved it?
*bump (sorry)
Anyone?
mexigga said:
*bump (sorry)
Anyone?
Click to expand...
Click to collapse
Sorry buddy I don't have a solution for you, but I got the same issue only thing I noticed is that whenever I text comes in the deck will lower the volume for sec and just continue playing.
mexigga said:
I have a Pioneer deck in the truck and I can easily connect via bluetooth and play music, however, I cannot hear the calls in or out. My note will connect but again, no sound. I have reset the deck and even cleared the bluetooth cache/data to no avail. Anyone ever had this issue/resolved it?
Click to expand...
Click to collapse
I'm not sure if you have check this yet but bluetooth devices typically support a number of profiles dependant on what the device supports. Go into your phone bluetooth settings, verify that your bluetooth connection to your Pioneer deck is set to allow both call audio and media audio by tapping on the gear on the right for the Pioneer deck bluetooth config on your phone.
If not toggle the setting.
freduser said:
I'm not sure if you have check this yet but bluetooth devices typically support a number of profiles dependant on what the device supports. Go into your phone bluetooth settings, verify that your bluetooth connection to your Pioneer deck is set to allow both call audio and media audio by tapping on the gear on the right for the Pioneer deck bluetooth config on your phone.
If not toggle the setting.
Click to expand...
Click to collapse
And if that doesn't work, try unpairing and repairing.
That too!
Viryllo said:
Sorry buddy I don't have a solution for you, but I got the same issue only thing I noticed is that whenever I text comes in the deck will lower the volume for sec and just continue playing.
Click to expand...
Click to collapse
NO worries - appreciate the answer.
freduser said:
I'm not sure if you have check this yet but bluetooth devices typically support a number of profiles dependant on what the device supports. Go into your phone bluetooth settings, verify that your bluetooth connection to your Pioneer deck is set to allow both call audio and media audio by tapping on the gear on the right for the Pioneer deck bluetooth config on your phone.
If not toggle the setting.
Click to expand...
Click to collapse
douger1957 said:
And if that doesn't work, try unpairing and repairing.
Click to expand...
Click to collapse
I'll give it a go, thanks bud.
I have Pixel 3 XL and this one bluetooth speaker, a JBL charge, won't auto connect to it. I have bluetooth on and when I go to the car it connects no problem. But the JBL it wont. I have to go into bluetooth settings, click paired devices, and click the JBL to pair it every time. Really annoying. Suggestions?
Novakingwai said:
I have Pixel 3 XL and this one bluetooth speaker, a JBL charge, won't auto connect to it. I have bluetooth on and when I go to the car it connects no problem. But the JBL it wont. I have to go into bluetooth settings, click paired devices, and click the JBL to pair it every time. Really annoying. Suggestions?
Click to expand...
Click to collapse
In BT settings under the device details of your JBL speaker which options do you have available? For testing I would turn all of them off (phone calls, contact sharing) except media audio. If you have HD audio available, you may try alternating between media audio and HD audio.
v12xke said:
In BT settings under the device details of your JBL speaker which options do you have available? For testing I would turn all of them off (phone calls, contact sharing) except media audio. If you have HD audio available, you may try alternating between media audio and HD audio.
Click to expand...
Click to collapse
Didn't work
Novakingwai said:
Didn't work
Click to expand...
Click to collapse
Exactly which model are you using eg. charge 3 or charge 4? Have you tried resetting the bt speaker? Are you using any other bt devices that may be conflicting, like a watch? If all this fails try downloading this app called BT Auto Connect. It's not regularly maintained but still works for me.
I have the same issue (years later, apparently). I have a JBL Flip and Flip 5 and neither will autoconnect to my macbook. I think, it might be an issue on my end since the same goes for my Marshall Killburn. Anyone with a similar problem?
Any help is appreciated.