I recently purchased a pair of Iogear wireless Bluetooth headphones to use with my Fuze. I went through the process of pairing them, and managed to get them to connect. But when I tried to use them with listening to music or making a call, they would not work.
Anyone else have a problem or a clue as to why they won't work?
The phone supports both A2DP and AVRCP.
Hope this is in the correct section.
I'm unsure on why it won't work. I have some Plantronics Pulsar 590A and they are top notch. I use it with my 8525 (Hermes) and the sound quality is great. Also, Plantronics does a great job on their warranty.
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
hotrod101 said:
I have noticed that sometimes when I connect my bluetooth headphones, that if I had the media player already launched that it would not play through the bluetooth headphones but though the built in speaker still. Once I shut down the media player and launched again after bluetooth was enabled and headphones connected, it would work.
When you paired the headphones, did you make sure that in the bluetooth settings for your bluetooth headphones (under settings, connections, bluettooth find and tap on your headphones and check there) that wireless stereo and handsfree was checked.
Sometimes also, my device for some reason just chooses not to connect anymore to my headphones and I have to do a soft reset to get it to connect. Does not happen very often - once per month. I use my bluetooth headphones and the Motorola T505 in my car for streaming music wirelessly to my car stereo every day.
Click to expand...
Click to collapse
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
addicus said:
You know this happens with me with Core Player. I have to set up the A2DP before I start a movie or song in the program or else it won't work.
Instead of doing a soft reset I just turn bluetooth off and then back on. That usually solves the problem of the mystery disconnect.
Click to expand...
Click to collapse
Yes I do this to for this particular problem. The soft reset required problem is something different - Not sure yet what causes it - I think that it is an app that I run every now and then that causes some kind of conflict even after it has been shut down. Still have to figure it out
mzshortay said:
Yeah, that was one of the first things I had done before even trying to use them. I checked the settings. But still to no avail. Even tried soft resetting.
It worked instantly with my Tilt though. But I bought them to use with the Fuze lol.
Click to expand...
Click to collapse
Have you been successful in connecting other bluetooth headsets to your device which worked?
hotrod101 said:
Have you been successful in connecting other bluetooth headsets to your device which worked?
Click to expand...
Click to collapse
Oh yeah. My bluetooth headset, Plantronics umm forgot the number works with the Fuze. This is a mystery to me
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
hotrod101 said:
Have you tried your new bluetooth headphones with different media players such as S2P or Mortplayer, TCPMP, Core Player, WM Player, HTC audio Manager should all support but perhaps what you are using does not. I don't have a Fuze so don't know how the built in audio manager media player works but have seen several posts with people having problems. Try another media player 3rd party such as S2P, Mortplayer, TCPMP (all free) or Core Player (not free)
Click to expand...
Click to collapse
Okay, I'll do that, but it doesn't even work with using them to make a call.
There's a built-in mic on them, so it should work with that as well. It says it's connected, but the lil headphone icon never shows up when I turn them on.
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
If this doesn't work you may wanna RMA yours and get a new pair. If that doesn't work, then you may wanna step up to a more expensive pair.
hotrod101 said:
Are these the ones you have
http://www.iogear.com/product/GBMH211W6/
It says your device must support Headset or Hands-Free Profile. try unchecking wireless stereo and only check one of these profiles and see if it works
Click to expand...
Click to collapse
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
mzshortay said:
Yeah, those are the ones I have.
And it does support both of those.
Maybe I'll do what addicus said and send them back.
I was really hoping these would work too! Darn.
-------------
After trying them again, when I tried to make a call, I heard it make a sound as if it was turning off, and still did not work properly.
I'll be returning these most likely.
Click to expand...
Click to collapse
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
addicus said:
Damn you shortay! Since I wrote in this thread my Plantronics have been tripping when I make a phone call and not syncing up. I figured it out. It's that new Yota dialer I put in the other day. Sometimes I can't use the bluetooth on a phone call unless the A2DP is hooked up. Weird.
Click to expand...
Click to collapse
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Cool beans shortay! Stay around XDA Dev.
mzshortay said:
Lol, sorry! I wonder if I hard reset my phone will it fix it.
I messed around with a new cab earlier today, and had to restore
my phone, and i think it's be tripping afterwards anyway. Last try before I sent them back...that's after the iogear support people reply to me. Appreciated all the help.
Okay, so the email I got from the support basically told me how to set up the bluetooth headphones. WOW... some help they are. Other than giving me a number to call if I needed "further assistance". I thought that's what I was asking for in the first place.
Anywho, after randomly deciding to hard reset my phone, I tried the headphones again, and wah lah...they work!
I guess some setting in my phone wasn't set right. Go figure. Anyway.. Thanks to those who helped.
I'll be keepings these.
Click to expand...
Click to collapse
Glad they are working now for you.
okay, so I may need you guy's advice. It seems as though they only work once and then i have to delete them from the phone, then discover them again. Could it be a defect in the particular headphones I have, or the model not working with my Fuze? Maybe I should RMA these anyway?
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
hotrod101 said:
Maybe you should head on into the shop you purchased your Fuze and describe the problem to them. Perhaps they will allow you to connect various different bluetooth headphones (that they have at the shop) to your device to see if it is a problem with your device or with your headphones.
Click to expand...
Click to collapse
This is a great idea! If you find out the problem is with the headset - RMA them. If not, dig deep in that Fuze forum and see if you guys can figure out a fix.
I keep on setting the audio bluetooth codec under dev optioons on "aptx" but after exiting the option goes back on "default".
Anyone can help?
thegios said:
I keep on setting the audio bluetooth codec under dev optioons on "aptx" but after exiting the option goes back on "default". Anyone can help?
Click to expand...
Click to collapse
Mine doesn't appear to stick either, but when I use my BT speaker I see an option in the connect dialog to use the Qualcomm aptX driver even though the codec is set to default (SBC). I don't see this aptX option when using my car or earbuds. I know this doesn't really help much, but I thought it was relative. I do know that the AVRCP setting does stick. Have you looked in the Google Issue Tracker? I'll go and star the issue if I can find it.
Edit: It is THERE listed as closed due to lack of data, feedback. Seems they ignored the obvious.... codec selection not sticking?
How do you tell if aptx is working while you're playing something to say a wireless speaker?
Sent from my Pixel 2 XL using Tapatalk
pixelsquish said:
How do you tell if aptx is working while you're playing something to say a wireless speaker?
Click to expand...
Click to collapse
In BT settings I see a toggle for Qualcomm aptX and it's on... but in Dev Ops the BT codec still says Default: SBC. I think the audio codec setting there is busted, but the phone seems to use the best available codec. The device is a Creative (Soundblaster) Roar BT speaker. Now if I could only get the phone to auto connect to my car kit. Stays paired but will only manually connect which is a real pain.
v12xke said:
In BT settings I see a toggle for Qualcomm aptX and it's on... but in Dev Ops the BT codec still says Default: SBC. I think the audio codec setting there is busted, but the phone seems to use the best available codec. The device is a Creative (Soundblaster) Roar BT speaker. Now if I could only get the phone to auto connect to my car kit. Stays paired but will only manually connect which is a real pain.
Click to expand...
Click to collapse
Hmmm. My JBL Flip 4 is paired and it can use aptx but no option there. Weird.
My fm transmitter car kit will connect automatically, as long as it's set for media and phone calls.. Is yours just set for media only?
pixelsquish said:
Hmmm. My JBL Flip 4 is paired and it can use aptx but no option there. Weird.
My fm transmitter car kit will connect automatically, as long as it's set for media and phone calls.. Is yours just set for media only?
Click to expand...
Click to collapse
Yes, I've tried every combination there. It was working perfect with the N6P, and has never worked with the P2XL. Car kit is the absolute cheapest Chinese one you can find on Ebay... audio only, BT version 2.0 I think with no phone mic lol. Time to pony up and get a newer/better one. Had not considered FM transmitter because my car has the line in AUX. in my console so I can hide it.... It's about the size of a matchbox. This is a first world problem I know, but really annoying to me, and I know it's the phone because the Nexus was working for a year no problems. Thanks for your response.
v12xke said:
Yes, I've tried every combination there. It was working perfect with the N6P, and has never worked with the P2XL. Car kit is the absolute cheapest Chinese one you can find on Ebay... audio only, BT version 2.0 I think with no phone mic lol. Time to pony up and get a newer/better one. Had not considered FM transmitter because my car has the line in AUX. in my console so I can hide it.... It's about the size of a matchbox. This is a first world problem I know, but really annoying to me, and I know it's the phone because the Nexus was working for a year no problems. Thanks for your response.
Click to expand...
Click to collapse
We are both very frustrated here. Me cause I know I have an aptx capable device and am not getting to use it. You because you can't do a simple auto connect via bluetooth. Oy! Come on January update!
see my post here for a similar issue that I was able to workaround fairly easy
TLDR: You need root, edit your build.prop (using text editor, some app from the play store, etc) and change the following key: persist.vendor.bt.a2dp_offload_cap
by removing -aac from the string.
I'm sorry if it looks like I'm spamming I just encountered this issue on a lot of forums with no result and I do hope that this will help some
I have Pixel 3 XL and this one bluetooth speaker, a JBL charge, won't auto connect to it. I have bluetooth on and when I go to the car it connects no problem. But the JBL it wont. I have to go into bluetooth settings, click paired devices, and click the JBL to pair it every time. Really annoying. Suggestions?
Novakingwai said:
I have Pixel 3 XL and this one bluetooth speaker, a JBL charge, won't auto connect to it. I have bluetooth on and when I go to the car it connects no problem. But the JBL it wont. I have to go into bluetooth settings, click paired devices, and click the JBL to pair it every time. Really annoying. Suggestions?
Click to expand...
Click to collapse
In BT settings under the device details of your JBL speaker which options do you have available? For testing I would turn all of them off (phone calls, contact sharing) except media audio. If you have HD audio available, you may try alternating between media audio and HD audio.
v12xke said:
In BT settings under the device details of your JBL speaker which options do you have available? For testing I would turn all of them off (phone calls, contact sharing) except media audio. If you have HD audio available, you may try alternating between media audio and HD audio.
Click to expand...
Click to collapse
Didn't work
Novakingwai said:
Didn't work
Click to expand...
Click to collapse
Exactly which model are you using eg. charge 3 or charge 4? Have you tried resetting the bt speaker? Are you using any other bt devices that may be conflicting, like a watch? If all this fails try downloading this app called BT Auto Connect. It's not regularly maintained but still works for me.
I have the same issue (years later, apparently). I have a JBL Flip and Flip 5 and neither will autoconnect to my macbook. I think, it might be an issue on my end since the same goes for my Marshall Killburn. Anyone with a similar problem?
Any help is appreciated.
Hey everyone, basically since the first day that i got this phone, the bluetooth been a pain for me, when any device is connected (car multimedia, speaker, headphones etc) to the phone and i will play music via the device thats connected, the audio will cut for a second every few minutes, tried looking for a fix without any luck, really considering switching the phone because of that, any possible fix ?
There are a few BT settings in developer options for audio etc
*Detection* said:
There are a few BT settings in developer options for audio etc
Click to expand...
Click to collapse
Tried changing them, they won't save for whatever reason
Are you sure it's just Bluetooth? Have you tried wired headphones? What app are you using?
knoxjon said:
Are you sure it's just Bluetooth? Have you tried wired headphones? What app are you using?
Click to expand...
Click to collapse
definitely only Bluetooth, i'm using wired headphones on a daily basis without any interference and i'm using Spotify and Youtube.
I am still trying to track down the problem I am having, but it definitely does it on wired headsets, too. It seems to get really bad for a while and then goes a while without doing it.
For reason Bluetooth audio doesn't work properly when I'm connecting it to car Bluetooth. However it works fine with headsets. I tried different cars by different brands and the issue stays. Please help.
No issue here. What is the issue ? Calls or music?
artoax said:
No issue here. What is the issue ? Calls or music?
Click to expand...
Click to collapse
Music. The audio sounds muffled. Was using OP6T before and it works perfectly. Issue happens only in iqoo9Pro
sounds like an issue with the BT codecs. Jump into Developer mode and play with the BT settings.
See screenshot attached.
artoax said:
sounds like an issue with the BT codecs. Jump into Developer mode and play with the BT settings.
See screenshot attached.
Click to expand...
Click to collapse
These are the options when connected to my car. All other options are greyed out. So no luck yet
M95ahd said:
For reason Bluetooth audio doesn't work properly when I'm connecting it to car Bluetooth. However it works fine with headsets. I tried different cars by different brands and the issue stays. Please help.
Click to expand...
Click to collapse
I have the same issue but a i think it's all Bluetooth conecction it sounds so low
I don't know what to do
Does cheking the disable bluetooth a2dp hardware offload fixes it? if not return that setting to the default if you want.