[Q] Cant get usb or wireless tethering to work - Xperia Play Q&A, Help & Troubleshooting

Recently installed:
Kernel - Lupus v7 http://forum.xda-developers.com/showthread.php?t=2167766
ROM - Atomic GB http://forum.xda-developers.com/showthread.php?t=2219154
The problem is that when I go to the options for enabling usb or wireless tethering the options are greyed out and i cannot click on them. Nothing is mentioned on the pages for the ROM and kernel about this and i have messaged the developers of both and am waiting for a response. Does anyone have any idea how to fix this?
Edit:
Another thing; I've tried to configure the wireless hotspot, input ssd name, set secutiy and password up as such but i cannot save these settings as the save button is greyed out and connect be selected.

lestralen said:
Recently installed:
Kernel - Lupus v7 http://forum.xda-developers.com/showthread.php?t=2167766
ROM - Atomic GB http://forum.xda-developers.com/showthread.php?t=2219154
The problem is that when I go to the options for enabling usb or wireless tethering the options are greyed out and i cannot click on them. Nothing is mentioned on the pages for the ROM and kernel about this and i have messaged the developers of both and am waiting for a response. Does anyone have any idea how to fix this?
Click to expand...
Click to collapse
Have you tried setting it up??? Just click configure wifi hotspot and set a password
Hit thanks if I helped :good:

i_like_chicken said:
Have you tried setting it up??? Just click configure wifi hotspot and set a password
Hit thanks if I helped :good:
Click to expand...
Click to collapse
Yes i tried to configure the wireless hot spot, the thing is when i input the name i want for the ssd, select the security and set the password the option to save these setting is greyed out and as such i cannot configure it.

lestralen said:
Yes i tried to configure the wireless hot spot, the thing is when i input the name i want for the ssd, select the security and set the password the option to save these setting is greyed out and as such i cannot configure it.
Click to expand...
Click to collapse
backup your data and perform a clean install

Related

ERROR 0x80072f78

Hi,
I have the ERROR 0x80072f78 when i try to surf on the net (or to update my htc home weather) when i'm connected through active sync. I have already applied the LSP.reg fix but it doesn't solve my problem (i can surf via wifi).
Any solution?
flashmp3, i just try that work for me.
It is very strange. I don't know what to do
hey guys had the same problem. what i did was just go to
start> settings> connections tab > USB to PC and uncheck the "enable advanced network functionality" box.
hope it works for you too.
Just ignore this error and go on...
after this error there was no crash of my trinity or ie
chris1 said:
hey guys had the same problem. what i did was just go to
start> settings> connections tab > USB to PC and uncheck the "enable advanced network functionality" box.
hope it works for you too.
Click to expand...
Click to collapse
Thanks it works well now
chris1 said:
hey guys had the same problem. what i did was just go to
start> settings> connections tab > USB to PC and uncheck the "enable advanced network functionality" box.
hope it works for you too.
Click to expand...
Click to collapse
Super ...thnx man!
Solution for the error 0x80072f78
flashmp3 said:
Hi,
I have the ERROR 0x80072f78 when i try to surf on the net (or to update my htc home weather) when i'm connected through active sync. I have already applied the LSP.reg fix but it doesn't solve my problem (i can surf via wifi).
Any solution?
Click to expand...
Click to collapse
There is a bug in the AES encrytion in mobile 6. I could solve that by deactivating the encryption on the device. Change this registry settings:
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL \Ciphers\AES 128/128]
Enabled=0
[HKEY_LOCAL_MACHINE\Comm\SecurityProviders\SCHANNEL \Ciphers\AES 256/256]
Enabled=0
The original value is 192. Change it to 0 and an other available encryption will be uses by the system.
Kind regards
Oskar

Samsung Focus S - USB Tethering: Confirmed Working

Anyone get this working, the old method doesn't work. The computer found the phone and installed the modem. Does the Samsung Focus S have different connection strings?
In the diagnostic screen there are more options than the Samsung Focus:
Zune Sync
Modem, Tethered Call
Modem, USB Diag.
Zune Sync, Modem.
Modem_QC, USB Diag.
dbrandusa said:
Anyone get this working, the old method doesn't work. The computer found the phone and installed the modem. Does the Samsung Focus S have different connection strings?
In the diagnostic screen there are more options than the Samsung Focus:
Zune Sync
Modem, Tethered Call
Modem, USB Diag.
Zune Sync, Modem.
Modem_QC, USB Diag.
Click to expand...
Click to collapse
Haven't got my Focus S yet. Have you tried the WiFi hotspot hack yet?
ryotgz said:
Haven't got my Focus S yet. Have you tried the WiFi hotspot hack yet?
Click to expand...
Click to collapse
internet sharing was loaded by default on my system settings.
Turning it on will trigger AT&T to enable the Tethering Plan. When I turned it on few months back on my Focus AT&T sent me a card within a few days stating they would turn on tethering automatically unless I called to tell them no. I used the USB tethering prior for 6 months with no word from AT&T until the I turned on internet sharing.
dbrandusa said:
internet sharing was loaded by default on my system settings.
Turning it on will trigger AT&T to enable the Tethering Plan. When I turned it on few months back on my Focus AT&T sent me a card within a few days stating they would turn on tethering automatically unless I called to tell them no. I used the USB tethering prior for 6 months with no word from AT&T until the I turned on internet sharing.
Click to expand...
Click to collapse
I see. I was hoping running this would keep AT&T from turning on the tethering plan.
ryotgz said:
I see. I was hoping running this would keep AT&T from turning on the tethering plan.
Click to expand...
Click to collapse
My original Focus was Developer and Interop Unlocked.
ryotgz said:
I see. I was hoping running this would keep AT&T from turning on the tethering plan.
Click to expand...
Click to collapse
That will not prevent it at all. Without that you won't be able to turn it on, but once you do turn it on AT&T will message you saying if you continue you'll automatically be enrolled in a tehering plan.
dbrandusa said:
internet sharing was loaded by default on my system settings.
Turning it on will trigger AT&T to enable the Tethering Plan. When I turned it on few months back on my Focus AT&T sent me a card within a few days stating they would turn on tethering automatically unless I called to tell them no. I used the USB tethering prior for 6 months with no word from AT&T until the I turned on internet sharing.
Click to expand...
Click to collapse
The exact thing happened to me. I've USB tethered my phone since January no problem and a week or two after trying internet sharing I got the message from AT&T. I figured the internet sharing triggered that but in fear of loosing my unlimited data plan I haven't tethered using either method since. Have you used USB tethering since getting the message with no problem?
clfosk said:
Have you used USB tethering since getting the message with no problem?
Click to expand...
Click to collapse
Yes, few months with no issues. I called AT&T yesterday and asked if any more "tethering" triggers came through and they confirmed no. I am 100% positive the internet sharing in system settings triggers the plan if you don't pay for one.
The USB method that original worked for the Samsung Focus doesn't work on Samsung Focus S. I have tried on 3 different computers that worked previously; I can easily connect my Samsung Focus but receive dial-up error 628 or error 619 on the Focus S, the strings have be different. The main reason I upgraded was the 4G speeds which are amazing on this phone.
I have uninstalled all the drivers, deleted the modem and reinstalled with no problems. I just can not get past the error. We need to get us new Samsung Focus S owners our modem back
Got it working...
Only if you can't get modem to work (Otherwise proced to Update)
Remove modem from computer
Uninstall all previous software
Reinstall
Plug phone back in
Let automatic drivers install
If you don't have the "Diagnosis" APP installed (Otherwise Proceed to Update)
1. Bring up the dial pad on the phone
2. Dial ##634#
3. Go to your APPS list and open "Diagnosis"
4. Dial *#7284#
5. Select Modem, Tethered Call (Option 2)
Start -> Control Panel -> Network and Sharing -> click "Set up a new connection or network" -> click "Set up a dial-up connection"
Use the following dial-up settings.
Dial-up phone number: *99***1#
User name: [email protected]
Password: CINGULAR1
Connection Name: Samsung Focus S
Click "Connect"
Click "Continue setup anyways"
Update:
Start -> Control Panel -> System -> Device Manager -> Modems, right click on "SAMSUNG Mobile Modem" click "properties"
Go to "Advanced" Tab, add: AT+CGDCONT=1,"IP","wap.cingular"
with no trailing spaces.
To override your works VPN/Proxy using your phones connection:
Start -> Control Panel -> Network and Sharing Center -> Change Adapter Settings -> right click on your newly created modem "Samsung Focus S" click "properties"
Go to "Networking" Tab, click "Internet Protocol Version 4 TCP/IPv4", click "properties" -> click "advanced", uncheck [ ] Automatic Metric, set to 1 click okay. Re-dial your modem.
You can verify the proxy override works by checking your public ip address whatismyip[dot]com; it should show your assigned AT&T IP address. You can now go to websites your work Proxy has blocked. Enjoy full internet access at work!
To use sync with Zune again:
1. Go to your APPS list and open "Diagnosis"
2. Dial *#7284#
3. Select Zune Sync (Option 1)
Note:
Adding "AT+CGDCONT=1,"IP","wap.cingular" with existing modem and drivers install didn't work for me, after reinstallation of modem and drivers it connected. You might be able to skip to the "update" step to see if works for you.
dbrandusa said:
I am using Windows 7 x64
Remove modem from computer
Uninstall all previous software
Reinstall
Plug phone back in
Let automatic drivers install
If you don't have the "Diagnosis" APP installed.
1. Bring up the dial pad on the phone
2. Dial ##634#
3. Go to your APPS list and open "Diagnosis"
4. Dial *#7284#
5. Select Modem, Tethered Call (Option 2)
Start -> Control Panel -> Network and Sharing -> click "Set up a new connection or network" -> click "Set up a dial-up connection"
Use the following dial-up settings.
Dial-up phone number: *99***1#
User name: [email protected]
Password: CINGULAR1
Connection Name: Samsung Focus S
Click "Connect"
Click "Continue setup anyways"
Start -> Control Panel -> System -> Device Manager -> Modems, right click on "SAMSUNG Mobile Modem" click "properties"
Go to "Advanced" Tab, add: AT+CGDCONT=1,"IP","wap.cingular"
with no trailing spaces.
To override your works VPN/Proxy using your phones connection.
Start -> Control Panel -> Network and Sharing Center -> Change Adapter Settings -> right click on your newly created modem "Samsung Focus S" click "properties"
Go to "Networking" Tab, click "Internet Protocol Version 4 TCP/IPv4", click "properties" -> click "advanced", uncheck [ ] Automatic Metric, set to 1 click okay. Re-dial your modem.
You can verify the proxy override works by checking your public ip address whatismyip[dot]com; it should show your assigned AT&T IP address. You can now go to websites your work Proxy has blocked. Enjoy full internet access at work!
To use sync with Zune again:
1. Go to your APPS list and open "Diagnosis"
2. Dial *#7284#
3. Select Zune Sync (Option 1)
Note:
Adding "AT+CGDCONT=1,"IP","wap.cingular" with existing modem and drivers install didn't work for me, after reinstallation of modem and drivers it connected. You might be able to just skip to this step to see if works for you.
Click to expand...
Click to collapse
Awesome! I'm tethered now and I'm trusting you that this is safe!
I didn't need to delete my old modem or uninstall any drivers. I plugged my phone in and it didn't even install new drivers but this worked right away.
clfosk said:
Awesome! I'm tethered now and I'm trusting you that this is safe!
I didn't need to delete my old modem or uninstall any drivers. I plugged my phone in and it didn't even install new drivers but this worked right away.
Click to expand...
Click to collapse
I think I changed too many settings in my modem which caused me to uninstall everything. Hopefully the quick route will work for most people! I am glad you got it working! I have never had AT&T notify me this way, only using the Mango tethering option.
Hopefully we can add this to a sticky and under the Samsung Focus S section when it is up and running.
dbrandusa said:
I think I changed too many settings in my modem which caused me to uninstall everything. Hopefully the quick route will work for most people! I am glad you got it working! I have never had AT&T notify me this way, only using the Mango tethering option.
Hopefully we can add this to a sticky and under the Samsung Focus S section when it is up and running.
Click to expand...
Click to collapse
Good job. The Samsung Focus S forum needs to go up soon!
Hello is there any way to make usbthetering on Omnia7 available? wolud be very nice
Have you tried following the same steps used for the Focus / Focus S?
Alternatively, have you tried a search?
USB tethering for all gen1 devices, even things like the DVP which otherwise have very little homebrew, has been known for many months. I don't recall if you had to tweak it slightly for the Omnia7 or not, but I don't think so.
focus flash
dbrandusa said:
Only if you can't get modem to work (Otherwise proced to Update)
Remove modem from computer
Uninstall all previous software
Reinstall
Plug phone back in
Let automatic drivers install
If you don't have the "Diagnosis" APP installed (Otherwise Proceed to Update)
1. Bring up the dial pad on the phone
2. Dial ##634#
3. Go to your APPS list and open "Diagnosis"
4. Dial *#7284#
5. Select Modem, Tethered Call (Option 2)
Start -> Control Panel -> Network and Sharing -> click "Set up a new connection or network" -> click "Set up a dial-up connection"
Use the following dial-up settings.
Dial-up phone number: *99***1#
User name: [email protected]
Password: CINGULAR1
Connection Name: Samsung Focus S
Click "Connect"
Click "Continue setup anyways"
Update:
Start -> Control Panel -> System -> Device Manager -> Modems, right click on "SAMSUNG Mobile Modem" click "properties"
Go to "Advanced" Tab, add: AT+CGDCONT=1,"IP","wap.cingular"
with no trailing spaces.
To override your works VPN/Proxy using your phones connection:
Start -> Control Panel -> Network and Sharing Center -> Change Adapter Settings -> right click on your newly created modem "Samsung Focus S" click "properties"
Go to "Networking" Tab, click "Internet Protocol Version 4 TCP/IPv4", click "properties" -> click "advanced", uncheck [ ] Automatic Metric, set to 1 click okay. Re-dial your modem.
You can verify the proxy override works by checking your public ip address whatismyip[dot]com; it should show your assigned AT&T IP address. You can now go to websites your work Proxy has blocked. Enjoy full internet access at work!
To use sync with Zune again:
1. Go to your APPS list and open "Diagnosis"
2. Dial *#7284#
3. Select Zune Sync (Option 1)
Note:
Adding "AT+CGDCONT=1,"IP","wap.cingular" with existing modem and drivers install didn't work for me, after reinstallation of modem and drivers it connected. You might be able to skip to the "update" step to see if works for you.
Click to expand...
Click to collapse
worked for me, I have a focus flash!!!!!! Adding the code in the advanced properties worked and the connection was no longer refused and connected right away
Hmm, I seem to have a problem. I get the phone set to "Modem, Tethered Call" no problem, but when I plug the phone into the computer the install new hardware wizard fails with the message that it "can't find the necessary software."
Any ideas?
captobie said:
Hmm, I seem to have a problem. I get the phone set to "Modem, Tethered Call" no problem, but when I plug the phone into the computer the install new hardware wizard fails with the message that it "can't find the necessary software."
Any ideas?
Click to expand...
Click to collapse
Install these drivers here: http://mirror.batteryboss.org/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
clfosk said:
Install these drivers here: http://mirror.batteryboss.org/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Click to expand...
Click to collapse
That did the trick. Using my phone as a modem right now... thanks!
Are the instructions in this forum so that I can use my 3G connection on my Samsung Focus S by my laptop that doesn't have Internet?
Or is it the other way around so that I can use my laptop's Internet connection so that my phone will be able to have Internet as well - just by connecting to the USB port?
I'm assuming it's for the former but I'd also like it if someone could point me to the latter.
It's for the former. For the latter, that's built-in; just connect the phone to the computer by USB and start the Zune software. It will create an Ethernet connection over USB for the phone to use, off of the PC's Internet connection. You could also use Internet Connection Sharing from the PC over WiFi, and connect the phone to that (it may help to use software that causes the PC's WiFi to appear as an access point; I'm not sure if the phone supports Ad-Hoc networks).
GoodDayToDie said:
It's for the former. For the latter, that's built-in; just connect the phone to the computer by USB and start the Zune software. It will create an Ethernet connection over USB for the phone to use, off of the PC's Internet connection. You could also use Internet Connection Sharing from the PC over WiFi, and connect the phone to that (it may help to use software that causes the PC's WiFi to appear as an access point; I'm not sure if the phone supports Ad-Hoc networks).
Click to expand...
Click to collapse
Awesome! I didn't know that Ethernet connection over USB was able just by having Zune and the Windows Phone. Tried it and it works great!
Would that only work with Windows Phone or any other phones/devices I use while Zune is running?

Lollipop tethering (working)

Thanks to datawrhsdoc for translating the OP
datawrhsdoc said:
1. Root your phone
2. Either modify your existing APN to use IPv4 and adding 'dun' to the list of APN types, or create a duplicate APN with the same modifications
3. Set the modified/new APN as your default.
4. Download tether_counter_kill.txt from the OP's first post, and rename the file removing the txt extension (http://forum.xda-developers.com/showpost.php?p=59858654&postcount=1)
5. Install Smanager from Play Store
6. Navigate to tether_counter_kill from Smanager, and set both 'Su' and 'Boot' options. Run it (you won't need to do this again)
7. Start Mobile Hotspot on your phone, and connect to the hotspot from your devices
8. Immediately start a VPN client from your device(s) which will tether. VPN must redirect ALL traffic (e.g., TorGuard).
9. Enjoy unlimited WiFi tether
Click to expand...
Click to collapse
You can also try adding this to your build.prop (I don't know if this does anything):
net.tethering.noprovisioning=true
Click to expand...
Click to collapse
Idea for the script taken from:
http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
This can be fixed permanently using the following procedure (UPDATE: no root required):
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
Click to expand...
Click to collapse
RussianBear said:
Looks like the settings.db is on a lock-down. I can't access it via sqlite any longer. It says: "the database is currently locked by another process"
Any ideas? @autoprime ?
Quick Edit: was able to copy settings.db to sd card and open it up with sqlite. couldn't change any parameters, as sqlite would fc. Downloaded this guy (http://sqlitebrowser.org/) and made changes, then overwrote the one in data/data directory. We'll see how/if it works.
Click to expand...
Click to collapse
Any luck so far?
Fhuron said:
Any luck so far?
Click to expand...
Click to collapse
Nope, something over-writes the tethering back to "1" after each reboot. I'm sure @autoprime can figure this one out, as he did for KK.
You are right I'm on LG G2 with official T-Mo lollipop and I was able to edit settings.db...not with sglite but with SQLite Debugger.
After reboot, the changes i made to the tethering reverted back to dafault 1.
For those that want to use wireless tether, try the app from this thread (it's $2.5):
http://forum.xda-developers.com/note-4-tmobile/general/unlimited-wifi-tethering-t2914057
I'm more interested in making the usb tethering work. I'll try using IPv4 + vpn tonight. Pretty sure it's going to fail because of the tether.dun set to 1...
P.S. additional links:
http://forum.xda-developers.com/note-3-tmobile/help/tethering-fix-t3068545
http://forum.xda-developers.com/tmobile-galaxy-s6-edge/help/unlimited-tethering-t3073884
Another quick update. The guide from here works for tether_dun settings: http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
You can use this command in terminal emulator, pending you are rooted.
su
settings put global tether_dun_required 0
Click to expand...
Click to collapse
or those having issues with tethering. I tested it out today and had issues. It would connect but would not resolve dns. I have unlimited tethering on Three, it's always worked until now.
Doing this resolved my issues. I suspect this issue will be resolve by Three when an official uk build is released.
This can be fixed permanently using the following procedure (UPDATE: no root required):
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
Click to expand...
Click to collapse
RussianBear said:
Another quick update. The guide from here works for tether_dun settings: http://forum.xda-developers.com/z3/general/lollipop-tethering-t3058923
You can use this command in terminal emulator, pending you are rooted.
Click to expand...
Click to collapse
anyone tested does this work with no tether tracking?
Uploading a tether_dun_required=0 script (needs root) that you can use with Smanager to either trigger it via a desktop widget, app, or set it on boot. Remove ".txt" from the end and navigate to it via Smanager. I will test tethering later tonight.
Make sure you click/select the SuperUser icon in Smanager's options.
You can also try adding this to your build.prop:
net.tethering.noprovisioning=true
Click to expand...
Click to collapse
Looks like we're money, at least on usb tethering. I will update the op.
any specific settings on Wifi Tether Router? I'm unable to get an SSID to show up using the instructions from wifi tether router's website.
updated APN to ipv4
ran script posted above..
rihc55 said:
any specific settings on Wifi Tether Router? I'm unable to get an SSID to show up using the instructions from wifi tether router's website.
updated APN to ipv4
ran script posted above..
Click to expand...
Click to collapse
Try using stock wifi tether and see if it's counting. I haven't used the other app yet.
RussianBear said:
Try using stock wifi tether and see if it's counting. I haven't used the other app yet.
Click to expand...
Click to collapse
Ohh okay. even better.. ill try it and report back. thanks
EDIT:
Strange, i cant even get an SSID to show up on the native hotspot now. I know it worked before -- i used it last Sunday. The hotspot turns itself off after like 30 seconds.
Okay.. So I did a factory reset because i didnt know how to fix my problem from my previous post.
Then I:
1) added the same APN as IPV5
2) did this:
Enable developer mode (Go to Settings -> About phone, and click on the build number until the developer mode is enabled).
Enable USB debugging under Settings -> Developer options
Connect the device with a USB cable to a computer with the Android SDK platform tools installed
Start an adb shell: adb shell
In the adb shell, run this command: settings put global tether_dun_required 0
3) used the native tether app
I haven't tested it very extensively but from what i can tell, i am able to tether and it just shows up as normal data vs mobile hotspot. I transferred bout 600mb as a test. will test more later.
Thanks for your help RussianBear!
EDIT:
I lied. i think tmobile was delayed in reflecting my usage. it showed up today.
My hot-spot was broken by LP. Devices connect fine but have no Internet whatsoever. I'm able to USB tether without issues using PDANet and just selecting level 1 hide tether usage works fine. No needs for UA switching or anything like that. Just wish the WiFi tether worked, even if it's counting.
Could anyone help with step by step instructions. I am new at this and dont want to do anything wrong. Plus i dont see the script.
dreday3223 said:
Could anyone help with step by step instructions. I am new at this and dont want to do anything wrong. Plus i dont see the script.
Click to expand...
Click to collapse
Dre, are you rooted? Script is attached to the bottom of the first post.
RussianBear said:
Dre, are you rooted? Script is attached to the bottom of the first post.
Click to expand...
Click to collapse
I am. What exactly do i have to do? Where do i place that command? This is all very new to me and I'm not trying to mess up my phone so the simplest of instructions would be great.
dreday3223 said:
I am. What exactly do i have to do? Where do i place that command? This is all very new to me and I'm not trying to mess up my phone so the simplest of instructions would be great.
Click to expand...
Click to collapse
Download smanager from the playstore, download the script, then using smanager navigate to the script and run it. You will need to select the su icon from the smanager's script options. Let me know if/where you get stuck.
Script Works for WIFI Tether
It appears that this method is working for WIFI tethering as well. I watched an 11 minute Youtube and then emailed myself a 5.5MB Powerpoint. Here are my results:
Before After
Mobile Hotspot 92.2 92.4
Data 462.2 527.1
Not sure where that 0.2MB came from, but that's not much of my 5GB plan, so I don't much care.
Update 1: Figured out where the 0.2MB came from. My testing used all encrypted traffic over HTTPS, and TMO couldn't track it. I then ran a CNN.com video and the Mobile Hotspot counter spiked. Still not quite there yet.
Update 2: Enabled my VPN, and no traffic at all is being tracked by TMO. No user agent required. Yipee!!
datawrhsdoc said:
It appears that this method is working for WIFI tethering as well. I watched an 11 minute Youtube and then emailed myself a 5.5MB Powerpoint. Here are my results:
Before After
Mobile Hotspot 92.2 92.4
Data 462.2 527.1
Not sure where that 0.2MB came from, but that's not much of my 5GB plan, so I don't much care.
Update: Figured out where the 0.2MB came from. My testing used all encrypted traffic over HTTPS, and TMO couldn't track it. I then ran a CNN.com video and the Mobile Hotspot counter spiked. Still not quite there yet.
Click to expand...
Click to collapse
Are you using a vpn service or just agent switchers?

Android P - can not enable USB file transfer

Android P - can not enable USB file transfer
all the options are greyed out.
they are all sellectable for me, im on stock rom, never rooted etc how about yours?
MrWolfman said:
they are all sellectable for me, im on stock rom, never rooted etc how about yours?
Click to expand...
Click to collapse
dint root it. simple install from image from google
dying4004 said:
dint root it. simple install from image from google
Click to expand...
Click to collapse
Hey I have the same problem - any solution to this?
Try Settings -> Developer Options -> Default USB Configuration -> set to File Transfer
Had same problem,changed kernels suddenly went away
Flash kernel 1.02
my issue was fixed by a reflash of the image.
fiveighteen said:
Try Settings -> Developer Options -> Default USB Configuration -> set to File Transfer
Click to expand...
Click to collapse
This one works for me. Running Pie on Nexus 6P.
Try restart device and connect this work for me only after restart

What to do if my nexus 7 shows 'saved' when i connect/add a network?

I have tried the followings:
*add a network
*tried to connect different networks
*logging into safe mode and add a network but it failed
*and finally factory reset which trapped me .ie, I removed my g accounts but when the reset finished the device is not allowing to skip the login to network
when i tried to connect after factory reset it still shows saved So now i have a tab which is stuck in FRP i can’t even bypass the FRP
plzzz.. help me
CYPHER2019 said:
....the device is not allowing to skip the login to network
when i tried to connect...
plzzz.. help me
Click to expand...
Click to collapse
No worries - Mob30x-fix1 adds the WiFi 'Skip' option.
:good:
k23m said:
No worries - Mob30x-fix1 adds the WiFi 'Skip' option.
:good:
Click to expand...
Click to collapse
THANKS :good:
So i should install TWRP in my device to do this
Am I correct?
thanks
k23m said:
No worries - Mob30x-fix1 adds the WiFi 'Skip' option.
:good:
Click to expand...
Click to collapse
my issue of network is still not resolved but now i could use my device
your solution helped me to skip the signing in
:good::fingers-crossed::good:
very thnx
CYPHER2019 said:
my issue of network is still not resolved but now i could use my device
your solution helped me to skip the signing in
:good::fingers-crossed::good:
very thnx
Click to expand...
Click to collapse
The network issue probably has nothing to do with your N7. Here is a helpful aggregation of numerous solutions. My bet is on switching to static IP or downgrading to TKIP/AES encryption.
Should you not find a fix in the linked thread, then we need N7 logs, please 'install' get-logs-sdcard.zip in TWRP, find 'logs.tgz' in the root of internal storage and post it here.
Next, boot Android, remove/forget all saved wifi networks and...
start logcat (I prefer 'time' format: adb logcat -v time > log.txt )
then quickly try wifi sign in
stop logcat immediately after the 'saved' message
compress and post the log here or upload it somewhere
The log gets big fast and you have to be quick with start/stop around the event to simplify its analysis.
:highfive:

Categories

Resources