Develop Bugs

No connection to Internet through ActiveSync

Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques

Astier said:
Hello,
I've upgraded my HTC P3300 with the htt://member.htc.com downloadable HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe
The ROM updated like a charm.
Since done I can no more connect my P3300 to Internet through my PC while using ActiveSync (4.5).
This worked correctly with WM5, on standard settings.
The USB to PC "Enhanced network" setting is enabled, I tried to disable and enable it again with no change. All settings are by default.
My PC get a 169.254.2.2 IP adress and I can Ping 169.254.2.1
Trying to load a page in IE returns a warning window "Connection impossible, go to connections settings"
Thanks for any suggestion,
Jean-Jacques
Click to expand...
Click to collapse
check out your settings in active sync, ive had this problem a few times and when i change the settings to work in the config page of active sync, the problem goes away.

Found, thanks
On the PC in ActiveSync:
File/Connection settings/ This computer is connected to ... Internet !
Jean-Jacques

Could you have it set to Automatic?

I had the same issue, solved it with this post http://forum.xda-developers.com/showthread.php?t=321471

WM6 / Activesync 4.5 will not pair

Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K

Kavafy said:
Hi all,
Since re-installing activesync my PC will not pair with my PDA. The PDA connects as a guest and I can use activesync to install software and browse files, but I cannot sync!
I believe a sync wizard is supposed to open but this doesn't happen.
I really hope you can help as I currently have no calendar or contact data on the PDA.
K
Click to expand...
Click to collapse
Open AtiveSync with phone NOT connected, goto "File" and "remove portable device" (or similar, I've italian version, I don't know exacly string in english).
If there is an old configuration, in this way you'll remove it, then it must start the wizard... (I hope...)

Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K

Kavafy said:
Hi!
Thanks for the reply! There are no existing partnerships in Activesync, because it is a new installation!
K
Click to expand...
Click to collapse
I thought it was a re-install... You can try removing all drivers and ActiveSync and reinstalling all, it seems an istallation problem or a wrong ActiveSync version...
Try to download ActiveSync newly

If you have any kind of firewall software try to disable it...
Then, if activesync works, you have to set up new firewall rules...

Did any of these methods work? did you do something else to make it work??

This is how I got it working.....
go to settings/connections, open USB-PCand untick "the enable advanced network configuration"
if this does not work, and if your trying to sync to an outlook server then in settings/connection, choose connections, chose advanced tab, select networks, then ensure both have chosen the same network ( ie my Work Network). On the chosen network chose edit, and you should see a Proxy Setting tab.. Choose this and ensure the only top box is ticked ( this network connects.....)
worked for me... dunno why?

yeah try xda-boj's one it should work fine
start\settings\connections\usb to pc and uncheck 'enable advanced network functionality'

Thanks for the suggestions. I know I wasn't clear in my earlier posts, so:
- I had Activesync 4.5 installed, and it worked.
- Then file transfer from the PDA to the PC stopped working (the files appeared to transfer, but did not appear on the PC)
- So, I uninstalled Activesync 4.5, downloaded it again, and reinstalled it.
- After the re-install, Activesync would not create a partnership with my PDA running WM6.
- The partnership wizard does not start!
- I don't get any error message; in fact nothing happens, except that the PDA connects as a "guest", so I am able to browse files and install software but not actually sync.
- I have tried: disabling Windows Firewall; disabling Avast! anti-virus; checking that all connection protocols are enabled in the "network connections" control panel; re-installing Activesync again; and finally I got the same error on another PC.
- I haven't yet tried unchecking the "Enable advanced network functionality" box - I'll try that as soon as I get home tonight.
Beyond uninstalling Activesync, is there anything else I should be doing to start with a clean system?
Thanks again,
K

I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time

I've tried unchecking "Enable advanced network functionality", but that doesn't solve it!
K

lhrt said:
I have the same problem.
You can try reinstall the active sync app (repair option) and then reconnect and uncheck "the enable advanced network configuration".
I am doing this evey time
Click to expand...
Click to collapse
Where can I find this option?
K

start->settins->USD to PC-> Enable advanced network functionality

Oh, OK. I'd already done that! Keep coming in with suggestions though!

DRIVER for T-Mobile DASH

When try sync with my computer mi pc show: new hardware found and ask for the driver: GENERIC RNDIS

cesartefacto said:
When try sync with my computer mi pc show: new hardware found and ask for the driver: GENERIC RNDIS
Click to expand...
Click to collapse
You need Microsoft ActiveSync 4.5 installed on your computer.

to solve your "generic rndis" problem:
START > SETTINGS > CONNECTIONS > USB to PC -- tick on ENABLE ADVANCED NETWORK FUNCTIONALITY
and its done

tramuyo said:
to solve your "generic rndis" problem:
START > SETTINGS > CONNECTIONS > USB to PC -- tick on ENABLE ADVANCED NETWORK FUNCTIONALITY
and its done
Click to expand...
Click to collapse
...really? what does that do? force the phone to use a different driver?

tramuyo said:
to solve your "generic rndis" problem:
START > SETTINGS > CONNECTIONS > USB to PC -- tick on ENABLE ADVANCED NETWORK FUNCTIONALITY
and its done
Click to expand...
Click to collapse
where to find "SETTINGS > CONNECTIONS > USB to PC" BTW..........

For a connection there are 2 sides of the line
the device can handle either SERIAL or RNDIS, where RNDIS is enabled on the device with the settings -> .... stuff as mentioned earlier. "Box ticked" means "use RNDIS" - not ticked means use SERIAL. The latter is slower.
the PC must support either of the two as well. SERIAL is there by default, for RNDIS the PC needs to have the drivers installed. They come with AS 4.5 or can be installed separately - seek for RNDIS driver at Microsoft.

[Q] Problem with selection USB-PC activesync or disk-drive

Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you

Are you trying to say that your phone always connects to your computer as a USB device even if you select something different?

Sounds like it.
I've got a similar issue, my screen is dead so I can't select anything and it comes up as a disk drive. Kinda need to get it to active sync so I can back the phone up to restore to my new one.
Without being able to see or use the screen I can't, unless there is a keyboard method to choose activesync.

when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...

the same think if I select the option activesync but the preselect in menu "SETTING-> USB to PC" is diskdrive, start option activesync...
Click to expand...
Click to collapse
This is the proper behavior
siusky said:
when I connect htc (with USB) to PC, appears this option selection:
(whatch the image to the link)
farm3.static.flickr.com/2007/4514994648_92afa7bd15.jpg
now, if I select the option disk-drive,
don't start option disk-drive but activesync because is preselect in menu "SETTING-> USB to PC"
(whatch the image to the link)
farm5.static.flickr.com/4060/4496803689_c5ace06880.jpg
Click to expand...
Click to collapse
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.

cbeck said:
This is the proper behavior
This is not the correct behavior.
So it seems like it works properly if you have the preselection set as "diskdrive" One option could be to just leave it set there.
A common problem though, and is probably what is giving you trouble, is the checkbox "enable faster data syncronization". Frequently, this just doesn't work out (not sure why) and the computer can not establish an active sync connection. The ppc or activesync self corrects by defaulting to a diskdrive connection.
uncheck the "enable faste data syncronization" box in settings, restart your phone and pc (verify the box is still unchecked after restart) and try the active sync again. Let us know how it goes... good luck.
Click to expand...
Click to collapse
Tried with the faster data box and without, mine starts active sync...which I want and need, it lasts for about one minute, then it disconnects and can no longer recognize the device unless I shut down the computer and do it again....but it just repeats this same things every time.

siusky said:
Hi,
when I connect it to the PC me appears the window of "chosen connect" but any options use, start always the option selectionated in preselesction SETTING-> USB to PC also if I check option " you ask type of logon when me connection"
sorry for my english
tahnk you
Click to expand...
Click to collapse
Hello!
Please insert this into registry:
Code:
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver"="RNDIS"
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
"Order"=dword:0000000a
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
"ItemFlags"=dword:0000001f
"DeviceCompanion"=dword:00000000
"ShowTime"=dword:00000005
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000
This should reset USB_To_PC to default settings and also ensure that you're running the proper driver.
Have a nice day,
Jackos

Just tried another cable...and it's working...idk why, but glad it's working again.

I have changed the keys of registry but i have the problem because ther is not some keys....
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
--> "DefaultClientDriver"="RNDIS" <----> (the value is Mass_Storage_Class) <--
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\HTCUSBToPCPopUp]
"Module"="\\Windows\\HTCUSBToPCSrv.dll"
"Prefix"="UTP"
"Index"=dword:00000000
"Info"=dword:00000000
--> "Order"=dword:0000000a <----> my value is 10(0X00000A) <--
"Flags"=dword:00000000
"Keep"=dword:00000001
"Context"=dword:00000000
"DisplayName"="HTCUSBToPC Service"
"Description"="USB To PC PopUp Service"
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"AskConnect"=dword:00000001
[HKEY_LOCAL_MACHINE\Software\HTC\USBToPCPopUP]
"OnlyTwoChoice"=dword:00000000
--> "ItemFlags"=dword:0000001f <----> I have not this key <--
--> "DeviceCompanion"=dword:00000000 <----> I have not this key <--
--> "ShowTime"=dword:00000005 <----> I have not this key <--
I have --> "Option" = 1(0X00001)
[HKEY_LOCAL_MACHINE\Software\OEM\USBtoPC]
"SyncMode"=dword:00000000
"EnableAdvanceChecked"=dword:00000001
"DisablePopUpUI"=dword:00000000

Just create the keys.

I tried to make a cab from those reg entries but couldn't make it install successfully...
There might be typo ("Advance" instead of "Advanced" ?) or is the cab I made not good for my machine (TP2) ?
Could anyone make OR help me make a working cab installer (without confirmation please, my "touch" screen is broken and I need it to put the original rom back before sending my TP2 back) ?
Thanks a lot

[Q] Cant get usb or wireless tethering to work

Recently installed:
Kernel - Lupus v7 http://forum.xda-developers.com/showthread.php?t=2167766
ROM - Atomic GB http://forum.xda-developers.com/showthread.php?t=2219154
The problem is that when I go to the options for enabling usb or wireless tethering the options are greyed out and i cannot click on them. Nothing is mentioned on the pages for the ROM and kernel about this and i have messaged the developers of both and am waiting for a response. Does anyone have any idea how to fix this?
Edit:
Another thing; I've tried to configure the wireless hotspot, input ssd name, set secutiy and password up as such but i cannot save these settings as the save button is greyed out and connect be selected.

lestralen said:
Recently installed:
Kernel - Lupus v7 http://forum.xda-developers.com/showthread.php?t=2167766
ROM - Atomic GB http://forum.xda-developers.com/showthread.php?t=2219154
The problem is that when I go to the options for enabling usb or wireless tethering the options are greyed out and i cannot click on them. Nothing is mentioned on the pages for the ROM and kernel about this and i have messaged the developers of both and am waiting for a response. Does anyone have any idea how to fix this?
Click to expand...
Click to collapse
Have you tried setting it up??? Just click configure wifi hotspot and set a password
Hit thanks if I helped :good:

i_like_chicken said:
Have you tried setting it up??? Just click configure wifi hotspot and set a password
Hit thanks if I helped :good:
Click to expand...
Click to collapse
Yes i tried to configure the wireless hot spot, the thing is when i input the name i want for the ssd, select the security and set the password the option to save these setting is greyed out and as such i cannot configure it.

lestralen said:
Yes i tried to configure the wireless hot spot, the thing is when i input the name i want for the ssd, select the security and set the password the option to save these setting is greyed out and as such i cannot configure it.
Click to expand...
Click to collapse
backup your data and perform a clean install