I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
machdown said:
I've done my fair share of searching and I couldn't come up with much so I strongly believe I have a unique problem. I hope someone can point me in the right direction
Im have a rooted GS3 747 running Paranoid Android. A couple days ago the phone wouldn't charge. I tried different cables and batteries and after some testing with other GS3's I realized that my phone's charging port was broken. As a result I couldn't even connect my phone to the computer to unroot it with odin. I want to unroot so I can send in the phone for repair under warranty. So I downloaded mobile odin pro and proceeded to unroot my phone. I copied the original rogers rom to the external sd, followed the instructions and started the process. Everything looked like it was going fine until I got stuck on the samsung screen. Did some more research and learned that I had to do a factory data restart by booting into recovery mode. Did that. By now I'm feeling pretty good about all this. I followed the instructions all the way and I'm thinking that I'm gonna get a stock phone shortly. Wrong! The phone was still stuck on the samsung screen.
Now since I cant connect my phone to the PC cuz the charging port is broken I dont know what to do. I would have just flashed Clockwork Mod like I did when I first rooted and started all over but I cant.
If no one has a solution then Im just thinking of sending it in as is. Maybe they wont be able to see that the phone is rooted since they wont be able to connect it their PC without swapping out the motherboard to fix the problem.
I should add that I went to a repair store to try and fix it and they told me that the only way would be swap out your mobo.
Click to expand...
Click to collapse
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
BCSC said:
You will want to be sure that your flash counter says 0. This can be found by entering download mode (vol down, home, power) and you will see "custom binary count". that is how they will tell that you have rooted. Have you entered recovery and done a factory reset to get past the boot screen? If you can full wipe/ factory reset and get back into Android, I recommend you use "triangle away" app to clear your flash counter.
Click to expand...
Click to collapse
I entered download mode and dont see flash counter anywhere. I got the warning screen were you have the option to restart or download.
Ya I entered recovery and did a factory reset but nothing. Really cant do anything with charging port broken.
I sent it in anyways for repairs. Hopefully they just replace it
I'm having the same problem with my Gs3 with CM10 4.2.2 running. Thought this would help.
Sent from my SPH-L710 using xda app-developers app
Related
Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
seokhun said:
Hey folks,
I was trying to flash a custom kernel (Phenomenal Extreme 4.0) from Clockworkmod on a rooted stock 4.1.2 rom and kernel. I placed the zips on my sd card, then flashed, but it was unsuccessful. Then, when I rebooted from CWM's main menu, the phone went dead. Nothing worked, no buttons, no nothing. Any combination I tried failed, from a simple reboot, to reboot into recovery, to a reboot into download mode. Took battery out, and placed it back in, still nothing.
I'd appreciate any help you can give me! If there's anything like a factory cable, that is still better than nothing. I think I bricked it, and no warranty (Samsung's 3 month is quite short). When I plug the phone in, the laptop responds with a sound but it's not the usual sound when you dock the device. A balloon says that device driver installation failed. Then nothing happens. In any case, I rooted it and there's a flash counter of 1 on it, even if I'm running stock everything. Again, I appreciate any help!
Click to expand...
Click to collapse
What forum did you find that kernel? Hopefully it was made for d2tmo.
+Bound for Valhalla!
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
seokhun said:
I just checked, it wasn't. It's actually made for the international version -- my fault. Oh crap, I'm totally screwed, aren't I? *rolling eyes and a long sigh*
http://forum.xda-developers.com/showthread.php?t=1917234 My question is, it failed regardless, and why would it die AFTER I reboot the phone? It should've died right when I tried to install it through CWM.
Click to expand...
Click to collapse
Google jtag repair.
That's an expensive paper weight.
|When Emotion Goes Up, Logic Goes Down|
I made a Nandroid before messing around.
Once I do the JTAG repair, can I restore using that Nandroid after re-rooting and flashing CWM? The guy who will be doing the JTAG said that it's dangerous because there's a risk of bricking involved.
I would just restore things individually, personally. I don't know what you had on there, but is there anything that you can't restore some other way ?
That happened to me when i flash wromg kernel. And I had a panic attack...but I somehow manage to go into recovery mod....if you can go into recovery mod...have no fear back up is there lol
Just wipe everything and restore your backup.
Sent from my SGH-T999 using xda premium
Send it back
Sent from my SGH-T999 using xda premium
seshaz said:
Send it back
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hopefully you can get odin to recognise it...
tdotdot said:
Hopefully you can get odin to recognise it...
Click to expand...
Click to collapse
I had the same problem when I first got my S3. I flashed a file that was for my S2 not realizing and the phone responded the same way or didnt respond at all. Im not saying this will work but you can try. Do the proper button combo to get into download. It wont show anything on your scrren but the phone could still be in download mode. Go ahead and try connecting it to your computer and see if odin will recognize it. Make sure you have your drivers installed and dont forget to push volume up to get all the way into download mode. It worked for me once before and I hope to never have to try it again. If you have already tried this then your out of luck and will have to jtag.
JTAG is no scam. It is a VERY reliable source! Go for it.
Sent from my Galaxy Nexus using xda premium
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Warranty Exchange!
seokhun said:
Never mind, warranty exchange. I don't want to send my phone to strangers, even if it's legitimate. Still $45-$60 on the credit card.
I have a question though, as long as the phone is under warranty, I can exchange for a replacement an unlimited number of times, right?
Click to expand...
Click to collapse
Yes you can...I did it with my S2 until I got one that did'nt have any signs of being refurbished. It looked brand new! I have even told them that something was wrong with the phone (hardware issue) when there was nothing wrong just because the one year warranty was about to run out and it had a few cosmedic blemishes..I have given them a lot of money in the past 9 years so I do'nt feel too bad... I did it with my Vibrant as well.
...would someone be wiling to help me out please?
I was running the SlimBean ROM and my wife is going to get me a Galaxy Note 3 and I am wanting to trade my phone back in (T-Mo S4) for a decent credit twords the note. I wanted to get my phone back to an unrooted mod free (counter reset, etc) bone stock condition. I snagged a rooted stock rom and booted into recovery (TW 2.5.0.2) and flased the zip. The idea was once I got that rooted stock ROM up, I would use the Trainge Away alpp, reset everything, then use ODIN to flash the T-Mo rom to remove the last traces of being modified.
Now...my phone will not boot at all, it just stays on the Galaxy S4 screen. The first time I let it go for almost 30 minutes...nothing...
I can still get into recovery, and into download mode - BUT, ODIN will not recognize my phone in download mode - my computer says the drivers are not there. I have KIES installed and I thought the drivers for the phone were included.
Kinda desperate here...heh
STrooperTK421 said:
...would someone be wiling to help me out please?
I was running the SlimBean ROM and my wife is going to get me a Galaxy Note 3 and I am wanting to trade my phone back in (T-Mo S4) for a decent credit twords the note. I wanted to get my phone back to an unrooted mod free (counter reset, etc) bone stock condition. I snagged a rooted stock rom and booted into recovery (TW 2.5.0.2) and flased the zip. The idea was once I got that rooted stock ROM up, I would use the Trainge Away alpp, reset everything, then use ODIN to flash the T-Mo rom to remove the last traces of being modified.
Now...my phone will not boot at all, it just stays on the Galaxy S4 screen. The first time I let it go for almost 30 minutes...nothing...
I can still get into recovery, and into download mode - BUT, ODIN will not recognize my phone in download mode - my computer says the drivers are not there. I have KIES installed and I thought the drivers for the phone were included.
Kinda desperate here...heh
Click to expand...
Click to collapse
Try going into recovery and wiping data/factory reset. If that doesn't work then uninstall all drivers and reinstall them. Reboot your computer and then try to connect your phone to Odin.
crzykiller said:
Try going into recovery and wiping data/factory reset. If that doesn't work then uninstall all drivers and reinstall them. Reboot your computer and then try to connect your phone to Odin.
Click to expand...
Click to collapse
Thank you, will give that a try.
STrooperTK421 said:
Thank you, will give that a try.
Click to expand...
Click to collapse
Use the USB cable that came with the phone too. While most other cables are fine, the occasional low quality USB cable has been known to cause all kinds of problems like this.
Skipjacks said:
Use the USB cable that came with the phone too. While most other cables are fine, the occasional low quality USB cable has been known to cause all kinds of problems like this.
Click to expand...
Click to collapse
Ok, here is an update. I got everything straightened out. I followed the instructions for resetting the ROM counter, and I used ODIN to flash the official T-MO ROM. In D/L mode it says system status Official, but binary status still reads modified...
Correction...now it shows both system and binary as custom again...
Now what?
does triangle away work now?
haldi15 said:
does triangle away work now?
Click to expand...
Click to collapse
I guess not, or I did something wrong... Oh well, maybe they won't notice since I'm not sending it in for warranty - just a trade in...
Heres what you gotta do to clear it out odin back to stock put triangle away apk on your desktop re root your phone just root no recovery or anything. . Then reboot fully skim thru setup put the apk on your phone install do the triangle away again now after thre that reboot your phone normally once it cuts off hit the buttons to lunch recovery and do the factory reset and you will be golden theres a thread how to do it in the general section:thumbup::beer:
Sent from my SGH-M919 using Tapatalk
Just got my used t-mobile note 2 on monday.I am having issues with the phone where the screen will start scrolling on it's own and keep trying to launch media hub or the weather widget and then the screen eventually freezes and won't respond.I have downloaded the emmc program and my phone doesn't have the defective chips.I have done 2 factory resets and the problem still persists and happens as it is being reset.Any one know what could be going on?If i leave the sim out the phone works fine though.
Best guess water damage. Check the tabs. Also get a new sim.
travispittman said:
Best guess water damage. Check the tabs. Also get a new sim.
Click to expand...
Click to collapse
Did another factory reset but before that deleted some apps i had downloaded and made sure to disable samsung media hub,gps and the weaqther widget and so far the phone has been fine.
Is it factory rom and kernel or has it been messed with? I originally bought an s4. Connected it to a shady charger and changed the polarity of the board. It was hard to get to take a charge and wouldn't hold a charge for very long. Went to have it looked at by a tech. Before he knew what I was there for he offered to trade me for a note 2. He looked my phone over and we swapped. Usually when people get rid of a phone it is not because they upgraded but because something is wrong. I dislike buying used for that reason. I have had ppl try and pass off water damaged stuff and all kinds of randomness. I always boot reboot and reboot and used phone before buying, Keep them there as long as possible to see if something is wrong. Ask a lot of questions. Usually when you purchase a used phone especially an expensive one such as the note2 you want to get what you are paying for and not duped into paying a lot of money for some ones broken mess.
It's factory original rom and kernel.
same here
dukenukems said:
Just got my used t-mobile note 2 on monday.I am having issues with the phone where the screen will start scrolling on it's own and keep trying to launch media hub or the weather widget and then the screen eventually freezes and won't respond.I have downloaded the emmc program and my phone doesn't have the defective chips.I have done 2 factory resets and the problem still persists and happens as it is being reset.Any one know what could be going on?If i leave the sim out the phone works fine though.
Click to expand...
Click to collapse
This may seem silly, but have you tried to clean the screen with a microfiber cloth? This same problem happened to me (except the weather widget part), and after a spray n' clean, it all got fixed.
Well huys i was able to root my phone pretty easily but am still on the stock rom it came with.Will using other roms and stuff be a bit easy for me to install or will it be tough since this is my first rooting adventure.
dukenukems said:
Well huys i was able to root my phone pretty easily but am still on the stock rom it came with.Will using other roms and stuff be a bit easy for me to install or will it be tough since this is my first rooting adventure.
Click to expand...
Click to collapse
It's simple as long as you have the ability to read through threads prior to flashing. 98% of problems with custom software installs is due to lack of patience by the flasher. Read alot, flash a little is a safe way to get started.
Hastily spouted for your befuddlement
I've rooted it and have tryed 2 different roms already.Just sad that my note 2 still has the screen lock up allthough using spen remains fine.
Well guys my hone had started to lovk up even at the boot screen and didn't want to respond to the spen either so i went into recovery mode and dids factory reset with cwmr but after i rebooted my phone it was stuck in infinite boot loop.Just reflashed phone with it's stock rom image from this site using odin but my phone will only boot to the t-mobile 4glte screen and won't go any further.I have gone back into recovery mode and factory reset but still the same problem.Is my phone bricked?
dukenukems said:
Well guys my hone had started to lovk up even at the boot screen and didn't want to respond to the spen either so i went into recovery mode and dids factory reset with cwmr but after i rebooted my phone it was stuck in infinite boot loop.Just reflashed phone with it's stock rom image from this site using odin but my phone will only boot to the t-mobile 4glte screen and won't go any further.I have gone back into recovery mode and factory reset but still the same problem.Is my phone bricked?
Click to expand...
Click to collapse
Not sure if I am allowed to post links to other sites, but check out: galaxynote2root.com. max has a tutorial for almost everything! Also did you do a full wipe? Whenever installing a new ROM if you get stuck in a boot loop go back to recovery and do a wipe again, also wipe cache, and dalvik as well. Hope this helps!
Flashed thw original rom image with odin but the original will jsut hang at the tmobile splash screen and never fully boot.I was able to flash the phone with twrp with odin and was able to use twrp from my phone to reinstall the jedix20 rom which does install and been working since.No matter what i do with the original factory image it will always refuse to boot past the tmobiole splash screen.
ON 11/19/13 i was having problems with my Sprint Samsung Galaxy S3 the wifi wouldnt work, couldnt get service on it and a list of other things. I was stock rooted with TWRP recovery before and flashed the stock MD4 with flashcount reset to take it back to Sprint so they can try to fix this which they did. After it was fixed I recieved it back and right after rooted it using the Samsung S3 Tool Kit. It was a success, but now my wifi, and bluetooth wouldnt work. So i was convinced to just not do anything and keep it stock and just wait till my next upgrade which is very soon. I did a factory reset and it booted me into the stock recovery and then i proceeded with the process. So as i was doing a factory reset it kept bring a TON of red error messages. NOTHING would mount, NOTHING would wipe, NOTHING happend. But in the end it said it said that it was a success. I was very confused to what was happening ive never seen anything like this. So i was very worried hoping it would boot back up like nothing happend, and thats exactly what happend. Nothing. All it did was boot up and stayed on the Samsung logo screen. The only thing i can do was boot into download mode and recovery. I then put my phone into DL MODE and downloaded the stock sprint rom from AdamLange and flashed it using Odin. That failed obviously. So I re-installed the CORRECT drivers, tried different USB cables and USB ports, and flashed again. That still didnt work. I then used the Samsung toolkit to unroot/unbrick my phone, that didnt work either. I read every forum related to this problem and beleive me i did, i stayed up all day and night trying to figure something out, trying to get information and re-did the process at least 2 times. I am on my last resort id never thought it ended up to me asking a question on here, i dont want to sound like an idiot but i am out of options...
Sorry i made this too long but id thought id put every single thing that i did to my phone that maybe i did wrong. Id appreciate it if anyone had any tips on what to do here, any feedback and any suggestions that can help me is appreciated, thank you.
See if THIS method works for you. Then you can start the process over.
prboy1969 said:
See if THIS method works for you. Then you can start the process over.
Click to expand...
Click to collapse
Yes i tried this. That's what I use whenever I take it to Sprint for fixes. And also if i were to try it again it wouldn't mount my sd card or the internal memory, maybe flash it through Odin even if its a .zip file? My flash count is at 3, will sprint still be able to replace the devise or at least fix it? Thank you for the suggestion though.
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
ScottPomroy said:
Hi friends!!
After my S4 decided to run away without insurance I had to revert back to my s2. It still had Hellybean on it so I upgraded it to PA 4.45 just to check it out on my phone. Then I went into the instructions on how to unlock the phone. I went to revert it back to stock ICS that it came with to do so and when I rebooted it gets stuck at the samsung logo that pulses. I can't get into recovery but I still can get into download mode but nothing works when flashed. I tried using ODIN for every stock ROM available and still nothing. I never bricked a phone before and this doesn't seem like one to me since the bricks I fixed before have never been able to go into DL mode without being jigged, Can somebody help me. I need this running asap for medical reasons. I'm a sitting duck without this phone if something should happen to me. I live alone and have no land line if I need to call 911.
Click to expand...
Click to collapse
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
jrc2 said:
Are you trying to boot into recovery while you are plugged into a computer?
Sent from my SGH-T989
Click to expand...
Click to collapse
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
ScottPomroy said:
Of course not. But I think the problem may be that I didn't know that Kies was still installed in this computer.
And removing Kies didn't work either. I was talking to a guy that does jtag repair near me he said try that first. Gave me a pit file and it didn't help.
Click to expand...
Click to collapse
Here is something something that has worked for me twice. Use JOdin3 ( https://builds.casual-dev.com/jodin3/) Plug your phone in before going to the websute and put the TWRP tar file in PDA. Click start. It will say it needs to obtain a pit file. Click OK. Ignore the part about using in the download mode combo. It should bootloop your phone and you then might be able to unplug your phone and boot into recovery. I use this as a last resort but it has worked twice for me.
Sent from my SGH-T989