Related
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing anything wrong. Here's how you unbrick it; worked for me
==Method 1:==
Prepare ODIN with the firmware you want to flash (in my case was Gingerbread 2.3.4) and get it ready to go.
-
Remove battery, wait for a bit. Insert battery again.
-
Flash a recovery with your specific filesystem (EXT4 or RFS)-(If you have EXT4, download ext4 only, don't get ext4+rfs)
-
Enter recovery & Wipe | Format:
System
Data
Cache
Dalvik Cache
Have ODIN ready. Connect phone to PC.
-
Reboot to Download Mode
Hold Volume down + Power + Home button at the same time.
-
At this point Odin should have detected your Galaxy Gio (Yellow rectangle should appear).
-
Insert the Stock Rom or Custom Rom.
-
Click Start button in Odin and wait about 5 min.
-
Reboot and wait
If all goes well it should come back to life.
If not, repeat the steps above ^ (Atleast 2x)
Download ODIN 4.42
Download OPS Only
Download DRIVER Only
==Method 2==
Here's a video using a USB Jig to Unbrick
nggabi said:
if u brick with rom manager you can use only jtag box.
Click to expand...
Click to collapse
www.jtagbox.com/
==Method 3==
You can try: One-Click UnBrick by AdamOutler
====================
Detailed procedure using ODIN HERE
==List of Stock Roms for GIO==
Password: samfirmware.com
OR
Password: sampro.pl
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Martin Riggs(Yunus) said:
Recovery mode and the download does not turn on my phone is not charging will not load in this case is, this process recovers the phone with Kies was updating the brick?
thank you
Click to expand...
Click to collapse
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
iok1 said:
It was hard to understand but did you mean: "Recovery mode and download mode does not work on my phone. It's not charging in this case. Does this process unbrick the phone with kies?"
Still hard to understand what you mean, did you brick your phone when trying to install clockworkmod?
Click to expand...
Click to collapse
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Martin Riggs(Yunus) said:
No, I never turn on my phone. charge can not Kies program and installing the official 2.3.6 TUR after download article but the phone does not open
Click to expand...
Click to collapse
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Peteragent5 said:
Try this:
Take out battery and wait for a while. Then put it back in.
Now, again, take out battery and wait for a while. Then put it back in.
Now try Download mode
Click to expand...
Click to collapse
Thank you!
but, how often the?
the exact solution?
No signs of life My Phone
Charge the phone using your charger
Sent over Electromagnetic Waves
This thread is useless without this info:
Howto brick a gio
1. Erase efs and bootloader partition
2. Have fun!
Sent from my hexacore rooted toaster with xdatoast premium
Peteragent5 said:
How to Unbrick Samsung Galaxy Gio
If your phone doesn’t boot into download mode and you have a black screen after flashing Froyo or GB here's how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.4) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your Galaxy Gio to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Gio ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
If not, enter the Stock Recovery and Wipe Data and Cache, then repeat the steps above ^
For a detailed procedure using ODIN look HERE
List of Stock Roms for GIO
Grab this tool to flash the stock ROM:
ODIN Multi Downloader v4.42
OPS File: GIO_v1.0.ops
Driver: GIO_Driver
Or to Download Odin and Gio.ops only (No Driver Included) Download HERE
PS. The correct Asia Gingerbread firmware is this one:
S5660DXKT4
Password: samfirmware.com
OR
Password: sampro.pl
Click to expand...
Click to collapse
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
jaibobro said:
well mine its not thata bad , i did the flash with odin but it keeps restarting , start image then goes back to logo and so on , what can ido? thanks
Click to expand...
Click to collapse
Go to recovery and wipe data/cache
Sent from my GT-S5660 using xda premium
I have done anything, but my phone has still a bootloop with every rom.
WietsedeVries said:
I have done anything, but my phone has still a bootloop with every rom.
Click to expand...
Click to collapse
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Peteragent5 said:
That's good!
As in: your phone still has life!!
Does stock Rom work for you? Reflash it but you MUST wipe Data and Cache using the STOCK recovery before you reflash Stock!!
Remember to follow flashing instructions posted by the Dev!
Click to expand...
Click to collapse
I have stock now on it, but I haven't wiped Data and Cache with the stock recovery, because I use CWM. This afternoon I will try to do it with the stock recovery.
Now I have wiped everything with the stock recovery, and then I tried to install the stock rom. I still have the bootloop. I really don't understand it. It has to work...
//When I click on "test redbend fota[FS]" in the stock recovery I get this error:
-- Update from RB Fota
E:failed to mount /data (invalid argument)
E:install_fota:Can't unmount /data
Can't mount data partition ...
Installation aborted
Click to expand...
Click to collapse
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
voetbalremco said:
any options if I can;t get into recovery, boot, and odin is stuck at downloading the first file in any .tar.md5 ?
kinda bricked my phone, odin doesn't do anything.
Click to expand...
Click to collapse
Is that tar.md5 stock rom?
lemmymet said:
Is that tar.md5 stock rom?
Click to expand...
Click to collapse
Fixed it, dont know how..
Sent from my GT-S5660 using xda premium
Take out the. md5 from the file
Fixed it already
Sent from my GT-S5660 using xda premium
I´m having the same problem. How did you solved it?
Thanx in advance
So am running stock 4.1.2 rooted and suddenly phone restarts and gets stuck at Samsung bootscreen
Factory reset and cache wipe from recovery didnt help
Tried to odin flash a firmware (4.1.2) odin says failed and never starts the flashing
Then I tried a 4.1.1 flashed perfectly. Though at first boot, it gets stuck at the working android logo and keeps restarting
what could be the problem ?
nabilbek said:
So am running stock 4.1.2 rooted and suddenly phone restarts and gets stuck at Samsung bootscreen
Factory reset and cache wipe from recovery didnt help
Tried to odin flash a firmware (4.1.2) odin says failed and never starts the flashing
Then I tried a 4.1.1 flashed perfectly. Though at first boot, it gets stuck at the working android logo and keeps restarting
what could be the problem ?
Click to expand...
Click to collapse
Its boot loop?
Sent from my GT-N7100 using xda premium
nabilbek said:
So am running stock 4.1.2 rooted and suddenly phone restarts and gets stuck at Samsung bootscreen
Factory reset and cache wipe from recovery didnt help
Tried to odin flash a firmware (4.1.2) odin says failed and never starts the flashing
Then I tried a 4.1.1 flashed perfectly. Though at first boot, it gets stuck at the working android logo and keeps restarting
what could be the problem ?
Click to expand...
Click to collapse
Is the handset rooted?
If so you need to download samsung note 2 toolkit. this is here >> http://forum.xda-developers.com/showthread.php?t=1923956
ensure you have the correct adb drivers but the toolkit can also do this aswell. you then need to put the system into recovery mode. (I assume you know how to boot up recovery.) You need to install a customer recovery specifically TWRP so boot up the toolkit. select your device and make sure you choose the current version of android you have on it not the version you wish to install. You then need to flass an insecure boot image for correct adb access so choose option 3, follow the instructions select TWRP as your recovery and complete as directed.
Once this has finished you then need to download your rom, if its stock it can be located here.
http://forum.xda-developers.com/showthread.php?t=2032849 for n7105 (lte version) and here
http://forum.xda-developers.com/showthread.php?t=1896696 for original.
Download the zip and place into the "push_files_here" of the toolkit folders.
Boot into your new twrp recovery
Reload the toolkit, choose your device, choose the option to push the file to your device, select the device, for destination type"/sdcard/" and follow onscreen options until file is finished.
Your file should now be on your phone in the home folder.
Go to "wipe", select "factory reset" now to "install" select your new spangly rom, wipe dalvik cache once completed and wala you should have one shiny new rooted odexed note 2 that sould load fine. Any issues get back to me and i will be happy to help.
I deliberately bricked my device about 8 times to find the best way to recover.
Kris
Try a pit file.
Sent from my GT-N7100 using xda app-developers app
a guy said something about a hardware/board defective ? I dont believe it ... could it be true ?
klashnikoff said:
Is the handset rooted?
If so you need to download samsung note 2 toolkit. this is here >> http://forum.xda-developers.com/showthread.php?t=1923956
ensure you have the correct adb drivers but the toolkit can also do this aswell. you then need to put the system into recovery mode. (I assume you know how to boot up recovery.) You need to install a customer recovery specifically TWRP so boot up the toolkit. select your device and make sure you choose the current version of android you have on it not the version you wish to install. You then need to flass an insecure boot image for correct adb access so choose option 3, follow the instructions select TWRP as your recovery and complete as directed.
Once this has finished you then need to download your rom, if its stock it can be located here.
http://forum.xda-developers.com/showthread.php?t=2032849 for n7105 (lte version) and here
http://forum.xda-developers.com/showthread.php?t=1896696 for original.
Download the zip and place into the "push_files_here" of the toolkit folders.
Boot into your new twrp recovery
Reload the toolkit, choose your device, choose the option to push the file to your device, select the device, for destination type"/sdcard/" and follow onscreen options until file is finished.
Your file should now be on your phone in the home folder.
Go to "wipe", select "factory reset" now to "install" select your new spangly rom, wipe dalvik cache once completed and wala you should have one shiny new rooted odexed note 2 that sould load fine. Any issues get back to me and i will be happy to help.
I deliberately bricked my device about 8 times to find the best way to recover.
Kris
Click to expand...
Click to collapse
hi kris, been on a vacation now am back
thanks for your reply, but when I am flashing the insecure image "boot-insecure-dlk7-N7100.tar"
it gives there is no pit partition
UtkarshGupta said:
Try a pit file.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
could u be more precise ? cuz i tried at first flashing with a pit and bootloader, csc, modem, code
nabilbek said:
could u be more precise ? cuz i tried at first flashing with a pit and bootloader, csc, modem, code
Click to expand...
Click to collapse
Did you try the method i mentioned using the note 2 toolkit. You need to have a customer recovery and bootloader to install certain thinkgs. Try the noet 2 toolkit and follow the instructions i sent you. This should fix it.
Put stock rom in pda and pit in partition and check repartition.
Then hit start
this is XXXDDDAAA
nothing solved it ... sent it to samsung they fixed it. they said they changed the internal memory and an ic ...
my phone has been root and rite noow im using cm10 a6...but now i want change back to gingerbread like the frst i buy it.. i also hve dwnload the stock rom provide in this thread..
1)should i unroot my phone first then install it next??
2)can i flash the stock rom using CWM or i must be using Odin?? but i never used odin..
U need to flash using odin or if u made backup using cwm recovery u will have stock rom again
Sent from my GT-I8150 using xda premium
natsu93 said:
my phone has been root and rite noow im using cm10 a6...but now i want change back to gingerbread like the frst i buy it.. i also hve dwnload the stock rom provide in this thread..
1)should i unroot my phone first then install it next??
2)can i flash the stock rom using CWM or i must be using Odin?? but i never used odin..
Click to expand...
Click to collapse
You have to use Odin for it, and also ancora.ops which is provided in arco's CWM thread. You first need to download Odin. Check on www.sammobile.com what the latest stock for your region is. Search the stock somewhere around here and in the dev-forum. Reboot your phone to download mode when connected to PC. Open Odin, insert ancora.ops and check one package. Choose your stock, most probably a .tar.md5 and flash it. Your phone will reboot and then you'll be on stock. When I did this with my softbrick I also lost root and CWM.
SGWUser said:
You have to use Odin for it, and also ancora.ops which is provided in arco's CWM thread. You first need to download Odin. Check on www.sammobile.com what the latest stock for your region is. Search the stock somewhere around here and in the dev-forum. Reboot your phone to download mode when connected to PC. Open Odin, insert ancora.ops and check one package. Choose your stock, most probably a .tar.md5 and flash it. Your phone will reboot and then you'll be on stock. When I did this with my softbrick I also lost root and CWM.
Click to expand...
Click to collapse
does thiis .tar.md5 include wth the firmware?? .i dwnlod the stock rom in this thread
natsu93 said:
does thiis .tar.md5 include wth the firmware?? .i dwnlod the stock rom in this thread
Click to expand...
Click to collapse
The stock ROM you've downloaded needs to be a .tar.md5
The .tar.md5 file is all you need.
Also, before proceeding to flashing that stock ROM, please, READ this first: http://forum.xda-developers.com/showthread.php?t=1467128
SGWUser said:
The stock ROM you've downloaded needs to be a .tar.md5
Click to expand...
Click to collapse
The stock rom i dwnloaded is in zip file... .tar.md5 file are in there and i hve extract it.... i also have follow step by step to install d rom via odin provided in this thread.. unfortunately .. my phone stuck in bootloop and nver to start up.. wht i hve done wrong?? And now i cnnot using my wonder again.. please help me...
natsu93 said:
The stock rom i dwnloaded is in zip file... .tar.md5 file are in there and i hve extract it.... i also have follow step by step to install d rom via odin provided in this thread.. unfortunately .. my phone stuck in bootloop and nver to start up.. wht i hve done wrong?? And now i cnnot using my wonder again.. please help me...
Click to expand...
Click to collapse
Try to unplug your battery about 15 minutes. And then try booting it up again. If still on boot loop then do another flash with Odin and it will work
Sent from my HTC Sensation using Xparent Green Tapatalk 2
reddvilzz said:
Try to unplug your battery about 15 minutes. And then try booting it up again. If still on boot loop then do another flash with Odin and it will work
Sent from my HTC Sensation using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
i already did for three time flash via odin but it still get bootloop...does my wondeer cnnot being turn on again??
natsu93 said:
i already did for three time flash via odin but it still get bootloop...does my wondeer cnnot being turn on again??
Click to expand...
Click to collapse
After flash using odin wipe data and wipe cache..
Sent from my GT-P5100 using xda premium
natsu93 said:
i already did for three time flash via odin but it still get bootloop...does my wondeer cnnot being turn on again??
Click to expand...
Click to collapse
dont forget to thick the "auto reboot" when flashing with ODIN.
mikrotik said:
After flash using odin wipe data and wipe cache..
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
how i doing that via odin???
mikrotik said:
After flash using odin wipe data and wipe cache..
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
Not sure that's gonna work since the recovery will also be replaced by the stock one.
If that's the case, I would do the following things:
1. Download CWM for Samsung Galaxy Wonder from here. (It's also available in the development section here.)
2. Flash it via ODIN, by following exactly the same steps as for the ROM flashing.
3. Enter CWM and:
clear data (factory reset)
clear dalvik cache (under "advanced" menu)
go back one step and under "mounts & storage menu -> select "format /system" option. This step is crucial for a clean install!! Especially when changing Android versions.
under the same menu, go ahead and format /sdcard. (Be careful NOT to format /external_sd !)
4. exit from there and put your phone into Download Mode again (Home button + Volume DOWN + Power Button).
5. flash the stock ROM via ODIN
6. That's all. Good luck!
Hope you got the correct stock ROM. Also, I hope this little tutorial helps you fix your phone.
If any questions, just ask. We'll be here to help.
Sent from my GT-I8150 using xda app-developers app
arsradu said:
Not sure that's gonna work since the recovery will also be replaced by the stock one.
If that's the case, I would do the following things:
1. Download CWM for Samsung Galaxy Wonder from here. (It's also available in the development section here.)
2. Flash it via ODIN, by following exactly the same steps as for the ROM flashing.
3. Enter CWM and:
clear data (factory reset)
clear cache
clear dalvik cache (under "advanced" menu)
go back one step and under "mount & storage menu -> select "format /system" option. This step is crucial for a clean install!! Especially when changing Android versions.
under the same menu, go ahead and format /sdcard. (Be careful NOT to format /external_sd !)
4. exit from there and put your phone into Download Mode again (Home button + Volume DOWN + Power Button).
5. flash the stock ROM via ODIN
6. That's all. Good luck!
Hope you got the correct stock ROM. Also, I hope this little tutorial helps you fix your phone.
If any questions, just ask. We'll be here to help.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
thank u a lot guys who reply to help me..i appreciate it ..now my wonder come back alive n .. thnx very999x much guys..
natsu93 said:
how i doing that via odin???
Click to expand...
Click to collapse
if you want you have to go back to GB stock rom flasing using odin downloader .. and if you undergo bootloop you should wipe data and wipe cache in recovery ... get my drift?
natsu93 said:
thank u a lot guys who reply to help me..i appreciate it ..now my wonder come back alive n .. thnx very999x much guys..
Click to expand...
Click to collapse
Hehe. I'm glad I could help.
In the future, please, don't name your threads "help me" or "need help" cause it's harder to look for. Try to give it a name such as "Galaxy Wonder Android downgrade to stock" or "Galaxy Wonder stuck in bootloop".
Again, I'm really glad now it works. And I hope you learned something today.
arsradu said:
Not sure that's gonna work since the recovery will also be replaced by the stock one.
If that's the case, I would do the following things:
1. Download CWM for Samsung Galaxy Wonder from here. (It's also available in the development section here.)
2. Flash it via ODIN, by following exactly the same steps as for the ROM flashing.
3. Enter CWM and:
clear data (factory reset)
clear cache
clear dalvik cache (under "advanced" menu)
go back one step and under "mount & storage menu -> select "format /system" option. This step is crucial for a clean install!! Especially when changing Android versions.
under the same menu, go ahead and format /sdcard. (Be careful NOT to format /external_sd !)
4. exit from there and put your phone into Download Mode again (Home button + Volume DOWN + Power Button).
5. flash the stock ROM via ODIN
6. That's all. Good luck!
Hope you got the correct stock ROM. Also, I hope this little tutorial helps you fix your phone.
If any questions, just ask. We'll be here to help.
Sent from my GT-I8150 using xda app-developers app
Click to expand...
Click to collapse
unnecessarily hard like that bro ...
just flash stock rom via odin downloader and if you have bootloop did wipe data and wipe cache in recovery after the install is complete ..
and it accomplishes everything ..
mikrotik said:
if you want you have to go back to GB stock rom flasing using odin downloader .. and if you undergo bootloop you should wipe data and wipe cache in recovery ... get my drift?
Click to expand...
Click to collapse
Please, read up.
It's not unnecessary and apparently it works.
I'm not sure the STOCK Recovery has those options and I'm not gonna flash it just to prove my point. But I hope you remember the fact that, after flashing the stock ROM via ODIN, CWM will be replaced with the stock recovery.
arsradu said:
Please, read up.
It's not unnecessary and apparently it works.
I'm not sure the STOCK Recovery has those options and I'm not gonna flash it just to prove my point. But I hope you remember the fact that, after flashing the stock ROM via ODIN, CWM will be replaced with the stock recovery.
Click to expand...
Click to collapse
YES
One question... Odin for Ubuntu... I know that Heimdall works the same for linux but how do you use it?
Ehndroix JB with S3 Style Pack :thumbup:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse
Install and try Philz Touch recovery.
Installation link: http://forum.xda-developers.com/showthread.php?t=2201860
Instrucions link: http://forum.xda-developers.com/showthread.php?t=2028103
similar issue
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?
chinoboy said:
Hi, I don't know if I should make a separate post but I have a similar problem.
My Note 2 is stuck on the "Samsung GALAXY Note II GT-N7100" screen at boot. Only by flashing a stock ROM through ODIN can this be fixed. When I try to install a custom recovery and ROM on it, it gets stuck again at that screen.
Can anyone help me?
Click to expand...
Click to collapse
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.
m.b.jikre said:
Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode.
Click to expand...
Click to collapse
Please reread my post. It's a persistent issue. Rebooting doesn't do anything. Recovery doesn't do anything.
What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app
m.b.jikre said:
What you willing to do? so I can guide you through the right way.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
This method has fixed numerous problems. Might be worth a try.
http://forum.xda-developers.com/showthread.php?t=2700479
chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
benben333 said:
I installed teh wrong TWRP so i tried to install a different version via odin - but now my phone just goes to teh samsung screen and doesnt boot -
I tried to go throigh this guide http://forum.xda-developers.com/showthread.php?t=2024207 but
but it didnt work I am on the n17100 which is probably why
atm just wanna get back to my stock rom -
can i install a different twrp over this one via odin ? or should I not have done that
essentially I need to install the n7100 twrp then ill be okay - but not sure how from this loop pls help
Click to expand...
Click to collapse
Download a stock firmware and use ODIN v3.09 to flash it onto your phone. It should work.
http://forum.xda-developers.com/showthread.php?t=2499794
chinoboy said:
I was wondering if anyone had a similar issue to mine and how to flash a custom rom after that. The only way I've found for the phone to work was to use ODIN to flash the stock firmware on it. After that, if I try to install a custom ROM, it goes back to the SAMSUNG screen at boot.
So if you, jikre, know how to fix this issue, I'm all ears.
Click to expand...
Click to collapse
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?
m.b.jikre said:
>>"Hold down power button for 5~10 secs. after it stucks on boot logo, and try if it reboots normally.
Or press Vol. up + Menu key and then power key for 5~10 secs it'd boot your phone into recovery mode."<<
If you wanted to install custom rom, if so, you can't flash it through Odin (Only for flashing for Official stuff ). Download a custom rom, whichever you wanted(Copy that rom on externel SD), reboot into recovery and by selecting 'wipe data and cache' >> 'clean to install a new rom'.
Then again coming to main menu select Install zip from sd, and redirect it to rom file which you've downloaded. In any custom rom like DN3, SenSonic they've full procedure for flashing the rom, just stick to it to install it perfectly...
Any quest?
Click to expand...
Click to collapse
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.
chinoboy said:
Jikre, I've already mentioned several times I know how to flash a recovery and custom ROM. I'm saying that the phone stops working after I try to do so.
Click to expand...
Click to collapse
Got you man, i'm just saying that this problem of yours is come with the Andro v4.3 and knox bootloader. First if anyone tried to install custom recovery it get stuck on bootlogo, but that is an another factor you can reboot it manually into recovery menu.
On the end when you attempt to reboot (from recovery) it asks you to disable stock recovery and you reboot your phone normally, that's it!
Sent from my GT-N7100 using XDA Premium 4 mobile app
Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.
chinoboy said:
Ah okay, that makes sense. Unfortunately that doesn't apply to my situation. I had already been on a 4.3 custom rom for several months when the phone just died like that. As of right now, I can only get it to work if I flash a stock ROM on it.
Click to expand...
Click to collapse
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?
m.b.jikre said:
Just try to wipe your phone from custom recovery (Not 'Clean Flash' & It may work). Have you tried to disable to recovery at end when it asks?
Click to expand...
Click to collapse
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.
chinoboy said:
I have used both CWM and TWRP recoveries. Complete wipe every time before installing a new ROM. Still doesn't work. Only wiping and installing stock firmware through ODIN would the phone start.
Click to expand...
Click to collapse
Which ROM you tried to flash? Can you upload a pic of PC Odin, showing how you flash the phone. Or just enlist the options.
Try flashing your phone by philz touch ('Wipe Data & Cache >> Clean to Install a New ROM" << Maybe your previous installation troubling to set a new one, If persist again try this method):
Instruction: http://forum.xda-developers.com/showthread.php?t=2028103
Downloads: http://goo.im/devs/philz_touch/CWM_Advanced_Edition
For flshing through PC Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100/philz_touch_6.25.0-n7100.tar.md5 (For N7100 Only).
freezed on boot logog
i have tried all the things like wipe the data go to recovery and all but its still stuck
My ph got stucked in a bootloop...when i tried to wipe out data through CMW recovery there are no option to select... one more thing i flashed stock rom & custome rom tooo many a time but my handset always gets into bootloop.... When i flashed stock rom and go into recovery mode i always get CMW rcovery in place of stock recovery... and there are no options to select... plz help if anyone can... thank u in advance...!!!!
Handset: I9192 (Galaxy S4 mini)
watsupsourav said:
My ph got stucked in a bootloop...when i tried to wipe out data through CMW recovery there are no option to select... one more thing i flashed stock rom & custome rom tooo many a time but my handset always gets into bootloop.... When i flashed stock rom and go into recovery mode i always get CMW rcovery in place of stock recovery... and there are no options to select... plz help if anyone can... thank u in advance...!!!!
Handset: I9192 (Galaxy S4 mini)
Click to expand...
Click to collapse
Did you tried Odin to flash stock firmware?(from sammobile)
yes... as i am unable to select any option in recovery... i used odin only to flasht!
yes... as i am unable to select any option in recovery... i used odin only to flasht!
plz if anyone can help me???
watsupsourav said:
yes... as i am unable to select any option in recovery... i used odin only to flasht!
Click to expand...
Click to collapse
You must get into download mode by hitting home and volume down when powering on. And the flash the OEM firmware of your phone.
Allready done that...hundread of time!!
marcdegasperi said:
You must get into download mode by hitting home and volume down when powering on. And the flash the OEM firmware of your phone.
Click to expand...
Click to collapse
ALLREADY FLASH STOCK ROM HUNDREAD OF TIME....BUT ALWAYS GET CMW RECOVERY WITH NO OPTION TO SELECT i.e unable to wipe data or anything & get stucked in bootloop allways...plz help me out!!!