Develop Bugs

Antutu or No-Frills?

I'm kinda new to this frequencies thingy... can someone enlighten me about this? currently trying 2 different cpu control, antutu and no-frills? which is better? and also what are the basics that i need to know before doing anything? like min freq. max freq? also the governor? and sometimes i can see on other threads about voltage? what's that for? sorry for my questions, tried to search the forum but did not find an exact explanation...

You need firs a kernel that suports UV (like fauxs kernel and francos new r10 kernel) ... faux recomands (and as far as i know its the only app that works properly with his kernel) THIS, and franco recomand HIS app

no frills give it a miss.. frequencies do not stick. for faux use system tuner and for franco use his app. hell i am pretty sure you can use franco's app with faux one as well

Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X

mikey0105 said:
Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X
Click to expand...
Click to collapse
if you are using s2w franco kernel you are not going to get any help from franco as he did not compile that kernel..you are better off downloading and flashing his latest release r10
so if you are going to flash r10 then use franco's app and you should be good to go..let me know how you get on cause i am to busy right now to try stuff

mikey0105 said:
Thanks for the info... Will check those... Im using sweep2wake franco from Renovate rom? Is it usable? And also. If i will set my max frequency to a lower number will it give me morw battery life in exchange of performance?
Sent from my HTC One X
Click to expand...
Click to collapse
I am not sure that changing the frequencies will give you any battery improvements ... for that use undervolting ... undervolt your device for -100 (that is stable for everyone) or -125 (just stable for some guys)

muamers said:
I am not sure that changing the frequencies will give you any battery improvements ... for that use undervolting ... undervolt your device for -100 (that is stable for everyone) or -125 (just stable for some guys)
Click to expand...
Click to collapse
That undervolting... Does it give us battery life?
Goku80 said:
if you are using s2w franco kernel you are not going to get any help from franco as he did not compile that kernel..you are better off downloading and flashing his latest release r10
so if you are going to flash r10 then use franco's app and you should be good to go..let me know how you get on cause i am to busy right now to try stuff
Click to expand...
Click to collapse
Will download it a bit later and will give you a feedback
Sent from my HTC One X

best cpu governor??

can anyone plz tell me which cpu governor is best- interacctive, smartassv2, conservative, smoothass, lagfree .... so that phone runs smooth, lagfree, best performance ....
and also which frequency is best??

Best one fore pure performance would be Performance obviously, but that will rape your battery.
Sent from my HTC Wildfire using xda premium

smartass v2 is the best balance of performance and battery life.....
i alredy have told you early in the other thered.....i dont really undersnd why you are making so many threads for your questions.....
max-710MHz
min-352MHz
governor-smartass v2
i/o scheduler- SOI
JIT(just in time)-enabled
VM HEAP-32nm
and please stop posting again and again with you same question....its not our fault you dont know the basic things....before posting use the search button...and google a bit to know the basic things

djpry said:
smartass v2 is the best balance of performance and battery life.....
i alredy have told you early in the other thered.....i dont really undersnd why you are making so many threads for your questions.....
max-710MHz
min-352MHz
governor-smartass v2
i/o scheduler- SOI
JIT(just in time)-enabled
VM HEAP-32nm
and please stop posting again and again with you same question....its not our fault you dont know the basic things....before posting use the search button...and google a bit to know the basic things
Click to expand...
Click to collapse
only one last thing..!! where to find vm heap?? i am not able to find it..
and the second thing...
as i have read one post regarding increasind sd card read and write speed...so i downlaoded root explorer and sd tools..when i opened /sys/devices/virtual/bdi/read ahead kb - it was wtitten 1028...now i dont know what to do after it
???

i am having a short time memory loss.....will get back to you as soon as i recover
vm heap can be found in
settings>>>cm settings>>>performance settings

djpry said:
i am having a short time memory loss.....will get back to you as soon as i recover
vm heap can be found in
settings>>>cm settings>>>performance settings
Click to expand...
Click to collapse
There ain't no dedicated cm settings on cm9,and vm heap size isn't there under performance. It's not there at all.
Sent from my HTC Wildfire using Tapatalk 2

did he want for cm9.....that pretty easy....use ram manager pro...for ics...it has a vm size allot-er...

djpry said:
did he want for cm9.....that pretty easy....use ram manager pro...for ics...it has a vm size allot-er...
Click to expand...
Click to collapse
Yup, he asked for cm9,he hadn't read the OP and he reported all the bugs present there.
Sent from my HTC Wildfire using Tapatalk 2

Wasimk32 said:
Yup, he asked for cm9,he hadn't read the OP and he reported all the bugs present there.
Sent from my HTC Wildfire using Tapatalk 2
Click to expand...
Click to collapse
i have read the op but was not known bout deir fixes...:crying:

[email protected] said:
i have read the op but was not known bout deir fixes...:crying:
Click to expand...
Click to collapse
to manually edit vm sizes on cm9....kindly install an app named.....ram manager pro....it controls your rams performance....in the latest edition for ics you will find vm size controller...jst switch it from there...
it would require super user capabilities
and governor ---smartass v2
good luck

[email protected] said:
i have read the op but was not known bout deir fixes...:crying:
Click to expand...
Click to collapse
ahh its ok Naman(if I'm not wrong), you'll learn with experience.To keep experimenting yourself is the way to go.
Good luck.
Sent from my HTC Wildfire using Tapatalk 2

djpry said:
smartass v2 is the best balance of performance and battery life.....
i alredy have told you early in the other thered.....i dont really undersnd why you are making so many threads for your questions.....
max-710MHz
min-352MHz
governor-smartass v2
i/o scheduler- SOI
JIT(just in time)-enabled
VM HEAP-32nm
and please stop posting again and again with you same question....its not our fault you dont know the basic things....before posting use the search button...and google a bit to know the basic things
Click to expand...
Click to collapse
trying out similar settings, hopefully will improve my battery life greatly

[email protected] said:
can anyone plz tell me which cpu governor is best- interacctive, smartassv2, conservative, smoothass, lagfree .... so that phone runs smooth, lagfree, best performance ....
and also which frequency is best??
Click to expand...
Click to collapse
Smartassv2 for Cyanogen or any other
Smartass for Sense Roms.
I set 746 max 352 min
With screen on/off profile.
Dont worry to post any question
Even if u think the question is easy...
There are few who still will answer and help you out
Sent from my HTC Wildfire using xda premium

A Few Questions about UnderClcoking and OverClocking

Hello people !
First a Fall , I am a member since a long time here , but never used to interact as i had jumped off the android bandwagon . Now i am back with a band with my new purchase of a really Awesome Samsung S3 :fingers-crossed:
i need Some help from you guys for a project i am writing .
I am writing on how under-clocking and over clocking an android SmartPhone would affect its hardware & software. mainly Focusing on How would the changed affect its performance , Stability and Battery life . And finally arriving at an optimum clock speed and if possible and algorithm to finding that optimum clock speed if its there .
Click to expand...
Click to collapse
I had an xperia play which i as using a long time back . its working perfectly fine . I decided to use it as i know the risks of over-clocking and how it may be dangerous to use on my primary phone atm .
All i am asking you guys is how can i go about this ? what all do i need to do to change the clock speed of my play ?
what apps can help me measure the battery life , stability and perfomance cahnges ?
basically please help me in anyway you can !
i will credit everyone in my study who helps :victory:
lets see the starrt of a great project !

hackerevan said:
Hello people !
First a Fall , I am a member since a long time here , but never used to interact as i had jumped off the android bandwagon . Now i am back with a band with my new purchase of a really Awesome Samsung S3 :fingers-crossed:
i need Some help from you guys for a project i am writing .
I had an xperia play which i as using a long time back . its working perfectly fine . I decided to use it as i know the risks of over-clocking and how it may be dangerous to use on my primary phone atm .
All i am asking you guys is how can i go about this ? what all do i need to do to change the clock speed of my play ?
what apps can help me measure the battery life , stability and perfomance cahnges ?
basically please help me in anyway you can !
i will credit everyone in my study who helps :victory:
lets see the starrt of a great project !
Click to expand...
Click to collapse
To over clock or vice versa, you need to have a custom kernel that allows it. A custom ROM is also good, but not always needed, but it is suggested Some apps on the market have over clocking abilities but an over clocking kernel is needed that is compatible. Also those apps have a kernel, but is specific to some devices. But go to your device's forums and find a kernel that has over clocking abilities then flash it. Some apps just allow you to over clock to the SET speeds of the kernel being used. Also for battery life, I suggest you use betterbattery stats on the market.
Sent from my SGH-T959 using xda app-developers app

SO which config would be the best ?
hey Thanks for your help bro !
considering i am already in the forums for my device , can someone recommend the best kernel and the best rom to install ?
And how do i go about installing it ?
PLease keep in mind it should be able to support maximum over clocking and underclocking .
Thanks !

Underclocking is doable with just root access, which can be obtained by using ZergRush. This will only work on firmware 4.0.2.A.0.58 or lower.
For overclocking, I would recommend DooMKerneL which requires an unlocked bootloader. It supports frequencies of 134MHz to 2GHz, though I think the stock kernel can go down to 122MHz or 128MHz or something (DooM changed the frequency table in his kernel).
To test the stability of your phone after overclocking, you can run stress tests with StabilityTest. Underclocking will not change the stability of the phone, it'll just make it slower.
My favorite ROM is Gin2JB, although anything stock-gingerbread-based should work just as well.
For testing performance, I recommend AnTuTu

Thanks again
Thanks for your help !
Now one question , does doomkernel have inbuilt over clocking and under clocking ?
also as you said it resitricts the underclocking to 134 Mhz but the stock goes to 122 Mhz . isnt thier a way to make this one also go the lowest possible value?
and what about the Adreno 205 @ 245 MHz GPU that the play has .. can we overclock underclock that somehow ?
Thanks again

Yes overclocking capability is built into DooMKerneL, and of course underclocking. You'd have to talk to DooM about putting in lower frequencies if you want anything lower than 134MHz in his kernel. He tried overclocking the GPU at one point, but it oddly gave worse performance in a blind-test so he removed it.

While we're one the subject of over clocking, you NEED an app like SetCPU to overclock right? Just wanna make sure DooMkernel isn't already set to 2.ghz. Yeah probably a noob question...

Xperia Player said:
While we're one the subject of over clocking, you NEED an app like SetCPU to overclock right? Just wanna make sure DooMkernel isn't already set to 2.ghz. Yeah probably a noob question...
Click to expand...
Click to collapse
Yes, you need an overclocking app. I think it defaults to Min:249Mhz Max:1017MHz. The Min might be lower, dunno. The Max definitely is 1017MHz (1GHZ) until you specifically tell it to overclock though

I would like it if theres a kernel that ALSO allows to underclock and overclock teh GPU AND CPU .
Otherwise i take it , Doom is the best to go forward with right ?

best config for nolag and game arc s?

what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other

TiagoRigueto said:
what is the best configuration to play without lag
GOVERNOR? and I / O SCHEDULER?
freq:?
kernel .587 adv or lupus or other
Click to expand...
Click to collapse
- Performance
- Noop
- highest frequency possible
Sent from Xperia Arc S

use lupus kernel for performance..

If you're wanting the best possible kernel & rom for gaming then use one of the gingerbread roms.

but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop

TiagoRigueto said:
but perfomance consume much battery....
i need config for use daily.......but no lag ..
i use 368mhz min
1500mhz max...
governor intellidemand
i/o scheduller = noop
Click to expand...
Click to collapse
just buy another battery

[Q] Best Battery Kernel for HOX?

Hi Guys,
I was wondering if you guys could point me towards the best kernel for battery life? Or perhaps just some CPU settings?
I'm currently on the Blade v2.1 custom ROM. And I was wondering if anyone could help me out? (Please keep it noob-friendly )
Cheers!

Use lionheart governer and noop
They are the best for performance and battery
no signature....problem ?!?!?!

Custom kernels don't work for JB Sense ROMs, so you stick with stock kernel

Ah I see, what about some CPU settings with apps like No Frills CPU Settings?

Any app
no signature....problem ?!?!?!

ncx kernel or stock one