[Q] DHD stucked on boot logo - Desire HD Q&A, Help & Troubleshooting

Hi all
I have a little trouble with my phone, because I did some stupid things on it...
I had android 2.3.5 with 3.12.405.1
So first I unlocked bootloader with htc-dev page, and now I know I shouldn't do that. Then after I found here a post what describes what should I do if I was noob and use the htc-dev. I followed the instructions so I can use the revolution hd zip and installed it.
After that reboot my phone and stucked on the htc boot logo. I can reach the 4text recovery menu and everything but I have no clue what should I do now. I tried the factory reset and everything what I found. Maybe I have to put back the original rom, but I don't know how to do it.

Imike86 said:
Hi all
I have a little trouble with my phone, because I did some stupid things on it...
I had android 2.3.5 with 3.12.405.1
So first I unlocked bootloader with htc-dev page, and now I know I shouldn't do that. Then after I found here a post what describes what should I do if I was noob and use the htc-dev. I followed the instructions so I can use the revolution hd zip and installed it.
After that reboot my phone and stucked on the htc boot logo. I can reach the 4text recovery menu and everything but I have no clue what should I do now. I tried the factory reset and everything what I found. Maybe I have to put back the original rom, but I don't know how to do it.
Click to expand...
Click to collapse
Have you flashed the boot.img in fastboot?
Read this: http://forum.xda-developers.com/showthread.php?p=28139822
Sent from my GT-N7100 using xda app-developers app

glevitan said:
Have you flashed the boot.img in fastboot?
Read this: http://forum.xda-developers.com/showthread.php?p=28139822
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Hey
Thanks for the help, I'll try it afternoon
I did exactly the same: http://forum.xda-developers.com/showpost.php?p=31211732&postcount=396
The procedure to do that is -
1. Download the attached zip file, extract it to Desktop or wherever you want using 7-zip/WinZIP.
2. Open the ROM zip file you downloaded. Extract boot.img from this zip to the previously folder which you just extracted in the above step.
3. Turn your phone completely off (pull out battery). Then hold 'volume down' while pressing power and continue holding it till you see a white screen with 3 green skateboarding Androids. This is the bootloader.
4. FASTBOOT will be the first selected option in the list. Press 'Power' to select it. Make sure that now it shows FASTBOOT in red under the initial green text.
5. Connect your phone to computer. See that the red FASTBOOT changes to FASTBOOT USB.
4. Open the adb_fastboot folder, open 'Start here.bat'. It will open a command prompt window in that folder.
5. Type 'fastboot flash recovery recovery.img'. You only need to do this once. It will flash 4ext Touch Recovery, which is better than CWM (thanks to madmaxx82 for the awesome recovery).
6. Type 'fastboot flash boot boot.img'. You will need to do this everytime you flash a custom ROM, but before you do so be sure you've copied the boot.img from the ROM zip to the adb_fastboot folder.
7. You should see some stuff like 'Sending data... data sent successfully'. If there's any error at this step report it here.
8. Once it has done everything and displayed successful confirmations, disconnect phone.
9. Hightlight BOOTLOADER and press 'power' to select it. Press 'volume down' to highlight RECOVERY and 'power' to select it.
10. Once you're rebooted into 4ext Touch Recovery, go to 'install zip from SD card', browse for the ROM zip file in your SD card. If you haven't copied the zip to SD card, go back a step, connect phone to computer, select 'toggle USB storage' and then copy it onto the SD card. Once you have the ROM zip on the sdcard, go to the main screen of the recovery, choose 'wipe/format'->format all partitions (except SD card). Now go back to main screen, choose 'install zip from sdcard' and browse to the ROM zip location, select it and confirm that you want to flash it.
11. When the flash process is done, go back to the main screen of recovery, and press reboot now. You will reboot into the custom ROM.
Click to expand...
Click to collapse
After reboot I stucked on the htc boot logo screen.

If you are s-on, then you have to flash the boot.img from the rom you installed using fastboot.
Sent from my SCH-I535 using xda premium

Related

What am I doing wrong? Loading baconbits.

So I perm rooted and it says S-Off in fastboot and I have superuser access I believe.
I got rom manager and downloaded clockwork through rm. I try to install rom from SD card, select the baconbits rom, it asks to backup or clear, I have tried both.
The phone boots to htc screen, then shows a black screen with a phone and a red symbol over it. I waited 20 minutes on that screen and nothing happened.
I was able to push vol up and power to get a console but I can't load anything there. It will reboot just fine after that but I have no changes and still cannot overclock.
Does this have something to do with the user keys or whatever?
Thanks in advance for reading this and any help that gets offered. I hate to have my first post on a forum being a "help me" post.
Sent from my T-Mobile G2 using XDA App
Go into Rom Manager and try to flash Clockwork recovery again. This has happened to a lot of people... Flash it a second time, and it should be good.
Dan
Did you download the "g2-recovery-test-keys.img" from the 3rd post quoted below?
Place that file in the C:/android/tools or whatever your cd line is, which should in the tools folder. Now go the 6th step. FYI the sixth step I tried from fastboot and recovery, none worked until I reinstalled the drivers my computer kept prompting me for and immedatly got the OKAY's from the 7th step.
Edit: The code "fastboot flash recovery g2-recovery-test-keys.img" should be copied pasted onto your cmd.
ciwrl said:
Noob walkthrough:
1.Setup Android SDK and install drivers/udev rules as needed
2. S-Off your g2 http://goo.gl/Sc134
4. Copy vision-baconbits-0.3.zip to your sdcard, rename it update.zip (you can do this via adb using: adb push vision-baconbits-0.3.zip /sdcard/update.zip)
5. Reboot to fastboot mode (adb reboot bootloader)
6. Flash the recovery http://n0rp.chemlab.org/android/vision/g2-recovery-test-keys.img : fastboot flash recovery g2-recovery-test-keys.img (if you get 'waiting for device' your phone either isnt in fastboot mode, or you will need to fix your sdk drivers)
7. You should get two 'OKAY's once recovery flash is complete
8. Press the power button once; then the vol down button to highlight 'recovery'; then the power button again to select the 'recovery' option
9. The phone will reboot to recovery
10. Press volume up+power to show the recovery menu
11. Select the 'Apply:update.zip' option, using volume keys to navigate, and power button as [enter]
12. Once the zip applies, reboot
If you get signature verification errors on the zip, it means your fastboot flash of recovery failed to apply, redo it
Click to expand...
Click to collapse
Bingo, That worked. Glad it was that simple. I actually had to flash clockwork a third time to get it to go all the way.
Sent from my T-Mobile G2 using XDA App

[GUIDE] Noob's Guide #6: I just HTC Unlocked, what now?

First thing you need to know is that no matter what happens, even if your phone is abducted by rabid kittens, I am not responsible for your actions. Second is that you just voided your warranty, no doubt about it. HTC has your serial number with record that you unlocked your bootloader. Thanks to JAS_21 for the idea for making this guide. So, the next things you are going to want to do are to flash clockworkmod recovery, and then su. Then you can flash a ROM. Let's start with clockworkmod.
You want to get the android-sdk working, which you can find a guide to here.. Then you want to go to this thread. Download the file attached to the post. Use winzip if you have windows or just click on it on mac to unzip the file. Plug your phone into your computer and select "charge only" mode. Copy the cwm img file to the tools folder of the android SDK. Now, it's time to open up ADB. Open up a command prompt on windows or a terminal window on Mac/Linux. Follow these commands.
Code:
cd [insert location of android-sdk here]/platform-tools
adb reboot bootloader
You should now see Fastboot USB on your phone. Open a new command or terminal window. Type the following:
Code:
cd [insert location of android-sdk here]/tools
fastboot flash recovery cwm-recovery-vivow.img
fastboot reboot
Congrats, you have now flashed clockworkmod recovery. Now, onto installing root access. Next, grab the su zip attached to the OP of this thread. Plug your phone into your computer and select "disk drive" mode. Copy the su zip file to the root of your sd card. Unmount your sd card and select "charge only" mode on your computer. Reboot into recovery. The easiest way is probably to open up a command window and type:
Code:
cd [insert location of android-sdk here]/platform-tools
adb reboot recovery
When your phone is in recovery, click "install zip from sd card," then "choose zip from sd card," then the su zip file. Hit the back button once. Then select reboot system now. When your phone reboots, download superuser from the market. Now you are ready to use root apps! If you want to flash a ROM, continue on.
Download the ROM of your choice. If you want to, use my guide for choosing a ROM found here. Download the ROM zip file. Plug your phone into your computer and select "disk drive" mode. Copy the rom zip file to the root of your sd card. Don't unmount your sd card yet.Next, make a copy and put it on your desktop. Use winzip on windows or just click on mac/linux to unzip the rom file. In the root of the ROM, you should see a boot.img file. Copy that to your tools folder of your android-sdk folder. Now, unmount your sd card and select "charge only" mode on your computer. Next, follow the following steps.
Before installing the ROM...
1. Download Titanium Backup from the market, allow superuser permissions, then click menu>batch>backup all user apps.
2. Make sure fastboot is off in settings>power.
3. Put the ROM zip on the root of your SD Card
4. Download SMS Backup and Restore, and backup your SMS.
5. Back up your contacts by checking "back up my data" or something like that under settings/privacy.
How to install the ROM...
1. Turn off phone, and hold power and volume down until you get a white screen that says Hboot.
2.Volume down/up is for scrolling; power is for selecting.
3. Scroll down and select RECOVERY.
4. Scroll down and selected BACKUP AND RESTORE.
5. Select BACKUP and wait for it to finish.
6. Hit the back button to go back to the main menu.
7. Scroll down and select WIPE DATA/FACTORY RESET.
8. Scroll down and select WIPE CACHE PARTITION.
9.Hit the back button to go back to the main menu.
10. Scroll down and select ADVANCED, then WIPE DALVIK CACHE.
11. Hit the back button to go back to the main menu.
12. Scroll down and select INSTALL ZIP FROM SD CARD, then CHOOSE ZIP FROM SD CARD, then whatever the ROM zip is.
13. Let it do its thing. This may take 5-10 minutes. DON'T PULL THE BATTERY.
Next, it is time to flash your boot image. Follow these commands.
Code:
cd [insert location of android-sdk here]/platform-tools
adb reboot bootloader
You should now see Fastboot USB on your phone. Open a new command or terminal window. Type the following:
Code:
cd [insert location of android-sdk here]/tools
fastboot flash boot boot.img
fastboot reboot
You are done with flashing the ROM now, congrats. To get your data back, follow the steps!
1. Run the initial setup. When you're setting up your google account, make sure the "keep data backed up" or whatever box is checked. This will make sure to restore your/keep your contacts backed up.
2. Redownload Titanium Backup. Hit menu/batch/restore missing apps with data.
3. Redownload SMS B+R. Restore your SMS.
4. Enjoy your new ROM!
I hope this guide clears things up for some people. If you have ideas or suggestions for this guide or others, feel free to comment. If I helped you, please hit the thanks button. I would really appreciate it!
Excellent guide!!!
i keep getting an error when trying to flash the recovery. when i type in fastboot flash recovery cwm-recovery-vivow.img it comes up saying cannot load cwm-recovery-vivow.img
also im s-on with hboot .98. could that be the problem?
reaper540 said:
i keep getting an error when trying to flash the recovery. when i type in fastboot flash recovery cwm-recovery-vivow.img it comes up saying cannot load cwm-recovery-vivow.img
also im s-on with hboot .98. could that be the problem?
Click to expand...
Click to collapse
Had the same issue but solved after looking over the instructions for doing this if you were downgrading. Instead of placing the image file on the root of your sd card, place it in the folder that contains fastboot in your android sdk. Do that and you will be able to flash it and continue with the instructions.
Oh wow. You guys are right. That's a typo. I'll fix that.
Sent from my ADR6350 using xda premium
Excellent post! Easy to follow, worked...what more could you ask for?
Yeh I thought that might have been the problem. But I ended up relocking the bootloader, downgraded using attn1s tool and after that it was all smooth sailing. Running mikrunny v1.01. But this is an excellent guide
Sent from my ADR6350 using XDA App
Excellent guide! Thanks!
Sent from my ADR6350 using XDA App
no boot.img?
When I try to flash the boot.img at the last step, it says error: Cannot load 'boot.img'. I tried to start the phone and it sticks as the htc splash screen ... any ideas?
Did you put it in the sdk tools folder?
just wondering...am i going to have to flash the su zip everytime i flash a new rom? Just flashed miui and when I superuser was not on the list of apps. I downloaded it, but have this feeling its not going to work until a flash su.zip
Nope, cuz most roms are already rooted.
I was having trouble getting my ADB to function correctly, so I went with the manual "update.zip" method to flash Clockwork. However, when HBOOT recognizes the PG32IMG.zip file, it just says its "Checking.." forever, and I don't know whether it's working or frozen up. How long is that part supposed to take? I'm so close!
Thanks for this post. Helpful and easy to follow!
frick frack and frick. Now my phone isn't recognized by my computer. Had zero issues with this before. I'm running the latest version of miui and cant get the phone recognized.
Noob question. Is it still possible to flash kernels on HTC sec unlock? Will the boot.img flash need to be done each time from now on? Great guide by the way.
Sent from my ADR6350 using XDA App
Every time you want to flash a Rom or kernel you need to flash the boot.img.
Sent from my ADR6350 using xda premium
Everytime I reboot the phone it gets stuck on the HTC logo. I have to rerun "flashboot boot boot.img" to get it to boot.
Please help.
ph1nn said:
Everytime I reboot the phone it gets stuck on the HTC logo. I have to rerun "flashboot boot boot.img" to get it to boot.
Please help.
Click to expand...
Click to collapse
That's an issue with the unlock I'm assuming.
Sent from my Mikrunny'd Superphone using Magic (TapaTalk)
It's unlocked via HTC's unlock tool.
Should i relock the phone, forget this guide, and use attn1's guide?
I already installed ClockworkMod 5.5 and CM7.2 nightlies, everything works unless i have to reboot then it loses the boot image. Any thoughts?
-----
edit: It was because of S-ON. I relocked my phone and used attn1's guide to bring the phone back to hboot 0.97 and then s-off. This guide is not useful it seems if you want to go AOSP.

Nandroid backup is not working, broken rom on sd card.. what to do?

After a good 20 min of trying to enter the re-captcha i can finally post:good:
I have a HTC one X and i was running cyanogen 10 alpha 2. I wanted to go back to the stock rom but after using the restore function my phone is hanging on the HTC one loading screen. (i made this backup before installing the cyanogen rom)
I only have the stock(odexed) rom as .zip on my sd card but after installing this from the zip the phone hangs on the loading screen.
So i have a backup that is not working after the restore, i have a .zip on my sd card that is not working and i have no sd card access to try other rom .zip. What can i do?
Is it something with the boot.img and the recovery.img?
I read something about RUU? But i'm on osx and i one see .exe?
Thank you!
After restoring you also need to flash the boot.IMG that goes along with your backup.
Goto recovery
mounts
Mount USB storage
Plug phone to Mac and navigate to your sdcard
Open folder clockworkmod
open folder backups
Open folder XXX (corresponds to your backup date)
copy the boot.IMG from the folder
Flash the copied boot.IMG in fastboot the same way as you did when installed the custom rom
Sent from my HTC One X using xda app-developers app
fvanommen said:
After a good 20 min of trying to enter the re-captcha i can finally post:good:
I have a HTC one X and i was running cyanogen 10 alpha 2. I wanted to go back to the stock rom but after using the restore function my phone is hanging on the HTC one loading screen. (i made this backup before installing the cyanogen rom)
I only have the stock(odexed) rom as .zip on my sd card but after installing this from the zip the phone hangs on the loading screen.
So i have a backup that is not working after the restore, i have a .zip on my sd card that is not working and i have no sd card access to try other rom .zip. What can i do?
Is it something with the boot.img and the recovery.img?
I read something about RUU? But i'm on osx and i one see .exe?
Thank you!
Click to expand...
Click to collapse
Hi,
You are into a boot loop because the boot.img you have on your phone is not compatible with the JellyBean Cyanogen mod ROM, or is not correctly flashed. First charge the phone upto at least 50% battery (to be safe). Then try following the steps below:
1. Download this tool>> http://forum.xda-developers.com/showthread.php?t=1634786
2. Extract the boot.img from the Custom Rom you are trying to install in a folder on your computer.
3. Extract Fastboot tool into a folder on your computer and replace the boot.img by the boot.img extracted from the Custom Rom in Step.2
4. Turn your phone OFF
5. Turn your phone ON in bootloader mode by holding the power and vol down buttons at the same time, your phone will start in HBOOT mode. It will be displayed somewhere in the middle of the text.
6. Use the volume keys to move up and down the list, and select Fastboot, then press the power key. Now your phone will come in FASTBOOT mode.
7. Connect your phone to the computer via USB cable. Your phone will now display USB FASTOOT instead of just FASTBOOT.
8. Run the tool and select the option to erase the cache and then select the option to continue.
9. Select the option for flashing boot.img and then continue.
10. Select the option to flash clockwork mod recovery.
11. Disconnect the USB cable. Your phone will now again say FASTBOOT.
12. Use the up or down volume key to select HBOOT and press the power button. This will take you back to HBOOT mode.
13. Use the volume keys to scroll to RECOVERY and press the power button.
14. This will take you to Recovery mode, now you can flash the Custom Rom you want using Recovery mode.
Let me know if I helped by clicking Thanks

HOX no OS

After unlocking my bootloader, I decided to flash ViperX and my phone got stuck in the white screen stating "HTC quietly Brilliant". I tried pressing the power button for a few seconds and it would go back to the same screen. I can only boot into Hboot and Fastboot USB. I tried botting into CWM recovery and realized that it it's gone. I've also tried using ADB but no use as it can't detect my device. Any help would be appreciated as I dont want to send the phone to HTC at the moment.
Bobbi lim said:
After unlocking my bootloader, I decided to flash ViperX and my phone got stuck in the white screen stating "HTC quietly Brilliant". I tried pressing the power button for a few seconds and it would go back to the same screen. I can only boot into Hboot and Fastboot USB. I tried botting into CWM recovery and realized that it it's gone. I've also tried using ADB but no use as it can't detect my device. Any help would be appreciated as I dont want to send the phone to HTC at the moment.
Click to expand...
Click to collapse
Boot into fastboot and type 'fastboot erase cache'.
Then boot into recovery (should work this time).
If it still doesnt work, then flash CWM again.
anks257 said:
Boot into fastboot and type 'fastboot erase cache'.
Then boot into recovery (should work this time).
If it still doesnt work, then flash CWM again.
Click to expand...
Click to collapse
Tried using fastboot erase cache but than it said something like waiting for device. I've tried pushing in CWM and TWRP and it was stated successful but when i tried to reboot into recovery, it goes back to the same htc quietly brilliant screen
Install CWM 5.8.4.0 with fastboot.
Mount SD card as USB from CWM. Flash the ROM, and also, flash the boot.img for the ROM.
Same thing happened to me.the boatload had relocked
sent from my highgrade HTC one x
BenPope said:
Install CWM 5.8.4.0 with fastboot.
Mount SD card as USB from CWM. Flash the ROM, and also, flash the boot.img for the ROM.
Click to expand...
Click to collapse
I've tried and it just says that's its successful but when I try to boot into recovery again, I get the same quietly brilliant screen
fastboot erase cache
Install the latest HTC drivers and android sdk.
Sent from my unlocked HTC One X using XDA premium.
Just thought I'd share this what I copied from a good source what helped me when I started flashing my hox but I use Linux so I don't have a clue about any window issues
.) Open the .zip file and copy 'boot.img' to your fastboot folder. Or the folder you use
.) Turn off your phone and enter the bootloader (Hold the Volume Down and Power Keys while off).
) Select 'Fastboot' by pushing the Power Key.
.) Plug your phone into your computer using a USB cable.
.)Now go to your computer and open a command window inside the fastboot folder (Hold SHIFT + Right Click on any white-space).
.) Type 'fastboot devices.'
) Type 'fastboot erase cache' and push enter. This can fix problems with bootloops or bootfailures.
.) Type 'fastboot flash boot boot.img' and push enter. It should say 'OKAY' if successful.
.) On your phone, select 'HBOOT' using the Power Key and scroll down to 'Recovery' using the Volume Down Key. Push to Power Key again to select it.
Once in recovery you can navigate by tapping the screen or by using the Power and Volume Up/Down Keys.
.) Select 'wipe data/factory reset' and accept the warning screen.
) Now select 'advanced' and select 'wipe dalvik cache.'
) Select 'mounts and storage' and then 'mount USB storage.'
.) Copy the .zip file you downloaded (Don't unzip it!) onto the SD card of your phone.
.) Unmount USB Storage on your phone and navigate back to the Recovery Homescreen.
.) Now select 'install zip from sdcard' followed by 'choose zip from sdcard.'
.) Select the .zip file and let it install.
Sent from my Xoom using xda app-developers app
did you flash the boot.img before flashing the rom ?
Before .... after......it should not matter , works on both options
anameeeen said:
did you flash the boot.img before flashing the rom ?
Click to expand...
Click to collapse
nope... I didn't know that I've to do that as I thought is just like a normal wipe and flash, like my old HTC Desire

[Q] SD card appears empty, and phone is stuck on load screen.

A buddy of mine rooted my phone after I had so much difficulty trying to do it myself. I went to update my ROM this afternoon and was brought to the white HTC loading screen with no more activity. Tried getting into my phone to put a new ROM on the SD card and nothing comes up on the SD card folder. I am able to put a ROM in the empty SD card folder and install it, but than it just gets stuck on the same screen as before. I'm really just in the dark here and that friend isn't any longer available to help me out. Thank you all in advance, hopefully this is fixable. I am quite concerned. I should add that I would like to ultimately just get back to stock and be done with things I don't understand so as to avoid this happening again.
Did you flash the boot.img from the rom.zip? These are the correct steps to flash a ROM:
1. Flash the boot.img from ROM.zip via fastboot. "fastboot flash boot boot.img" then "fastboot erase cache"
2. Boot into recovery and use THIS by flashing it.
3. Now flash the ROM.zip and then gapps.zip via recovery.
4. Reboot.
vin4yak said:
Did you flash the boot.img from the rom.zip? These are the correct steps to flash a ROM:
1. Flash the boot.img from ROM.zip via fastboot. "fastboot flash boot boot.img" then "fastboot erase cache"
2. Boot into recovery and use ]THIS[/URL] by flashing it.
3. Now flash the ROM.zip and then gapps.zip via recovery.
4. Reboot.
Click to expand...
Click to collapse
I have tried flashing the boot.img but when I go to put the file onto my phone I don't have any folders such as the boot.img folder to put it in. As for flashing the link above, I am taking a stab in the dark here but I assume that I download that link, extract it and place it on my SD card somewhere. I'm not sure as to how I flash it. Sorry... I really have tried learning the ropes of this, but I can't seem to grasp it.
I somehow now have access to TWRP on my device... I am so confused.
Scalliedhooligan said:
I have tried flashing the boot.img but when I go to put the file onto my phone I don't have any folders such as the boot.img folder to put it in. As for flashing the link above, I am taking a stab in the dark here but I assume that I download that link, extract it and place it on my SD card somewhere. I'm not sure as to how I flash it. Sorry... I really have tried learning the ropes of this, but I can't seem to grasp it.
Click to expand...
Click to collapse
1. First you need to download a custom ROM like this one : http://tunsd.de/downloads/ICJ/IceColdJelly421/aokp_ICJ422-V3.0.zip , Gapps : http://goo.im/gapps/gapps-jb-20130301-signed.zip and Super wipe script: https://www.dropbox.com/s/0y31poo1kiaif4y/Super wipe script.zip
2. Open the aokp_ICJ422-V3.0.zip with winrar/winzip and extract the boot.img and place it in the "fastboot" folder in your PC. (since you have already unlocked/rooted it, I guess you know which is the fastboot folder)
3. Connect your Phone to your PC and make a new folder named "ROM" and put the aokp_ICJ422-V3.0.zip , gapps-jb-20130301-signed.zip and Super wipe script.zipin it.
4. Turn of your phone. Now hold the power button and volume down button together until the bootloader screen pops up. (White screen with 3 android figures at the bottom)
5. Now select "fastboot" using the volume up/down keys and press power button once you highlight it to get into fastboot. Now connect your phone again to your PC.
6. You will hear a sound on your pc and on the screen it will say "fastboot USB".
7. Now open fastboot folder on your PC and press shift key and simultaneously rightclick and click on "open command prompt here".
8. type the following lines:
fastboot erase cache
fastboot flash boot boot.img
fastboot erase cache
9. Now disconnect your phone and head back to "HBOOT" and then select "Recovery".
10. Now go to "install zip from sd" and select "ROM" folder which you had created earlier on the phone.
11. Now select "super wipe script" and install it. After everything is done you will come back to choose zip from sd.
12. Now again navigate to ROM folder and select "aokp_ICJ422-V3.0.zip" and install it. and then install "gapps-jb-20130301-signed.zip".
13. Now go back and select "reboot system now".
14. If you have done all the above steps correctly, you will boot into IceColdJelly Rom!
Scalliedhooligan said:
I somehow now have access to TWRP on my device... I am so confused.
Click to expand...
Click to collapse
Irrespective whether you have CWM or TWRP... Steps will be similar for flashing the ROM... Just the names of the buttons/options will be different!
If you want to use CWM, then download this : http://htcfanboys.com/download/seadersn/?action=list&file=2823
Put the recovery.img in your fastboot folder. Boot your phone in fastboot mode and fire the following lines in CMD.
fastboot erase cache
fastboot flash recovery recovery.img
fastboot erase cache
Now you can follow the steps which I have given blindly!
My phone was unlocked and rooted from a different PC so I have no fastboot folders or any knowledge on what a fastboot folder is.
Scalliedhooligan said:
My phone was unlocked and rooted from a different PC so I have no fastboot folders or any knowledge on what a fastboot folder is.
Click to expand...
Click to collapse
Download HTC Sync Manager: (this is required so that correct drivers are installed on your PC)
http://www.htc.com/www/support/software/htc-sync-manager.aspx
After download is complete, install it and restart your pc.
Download Fastboot Folder:
http://www.mediafire.com/?cm2famr3xd2cnom
Extract it somewhere on your pc.
Now look at my previous post and follow the steps...
Everything went swell until step 10. Every time I tried to install anything it came up as failed. I repeated the steps several times with the same results. I really appreciate your efforts in trying to help me.
Scalliedhooligan said:
Everything went swell until step 10. Every time I tried to install anything it came up as failed. I repeated the steps several times with the same results. I really appreciate your efforts in trying to help me.
Click to expand...
Click to collapse
What error message do you get while you flash?
what is your HBoot version?
Go to bootloader(Power button+Volume Down)... once you get to that white screen, you should be able to see your hboot version... something like hboot 1.39...

Categories

Resources