Develop Bugs

HELP NEEDED with CWM "error while restoring /data!"

Hey guys,
I have kind of a serious issue right now. I used Touch Recovery 5.8.0.2 and made a full backup today of my whole ROM (2.5GB) before trying out some mods which eventually didn't work. So I decided to wipe and restore the backup I made. No matter what I do I cannot get it to restore my data partition properly. I keep getting "Error while restoring /data!" message, however it does the boot image and system fine but doesn't continue to cache and sd-ext because of the failed data. Whenever I boot it up, some of my apps are missing from the home screen and practically all of them are not working when I launch them (force close). I also get boot up error of Google+ force close, among a bunch of other issues. This is happening even when I try to restore an older backup as well. My device is not working state right now and although I can just restore the stock images to get it working again, it is urgent that I restore my data ASAP! I tried wiping several times and even using the non-touch 5.5.0.4 recovery to restore and same thing keeps happening.
Any help would be highly appreciated!
Please don't tell me my backup is corrupt
Update 1: Eventually I gave up and started from scratch but I have confirmed already this happened on a fresh backup as well, at this time we are trying to figure out what is causing this so I can go back to safely backing up and restoring backups.
Update 2: We have test builds of TWRP Recovery that may have resolved this issue! We need testers!
Please see this post: Link Here
Update 3: We have test builds of ClockworkMod Recovery 6 that may have resolved this issue as well! We need testers!
Please see this post: Link Here
***Always see last few posts on the thread for updates on what we discovered just in case I don't update the OP***

Unfortunately I also have the same error today!
Please help us out.

JayantSparda said:
Unfortunately I also have the same error today!
Please help us out.
Click to expand...
Click to collapse
is your phone encrypted?
are you running stock recovery?
are you running a stock Rom?
have you done a factory reset yet?

Hi Spectre85,
My phone did fine yesterday, I was running AOPK Milestone 3 with FAUX123 kernel.
But when I woke up, my phone looked like it's battery was emtpy.
- When I plugged the phone with the charger, I started the phone again.
- Unfortunately my phone keep looping at the Google screen over and over.
So I pulled the battery and put the battery back again in the phone.
- I went to the bootloader and went to CWM recovery.
Deleted Data, Cache and Dalvike cache.
- Tried to retrieve my backup rom, but keep getting this "Error while restoring /data!" message.
I've tried to install other roms as well, but I still keep getting the bootloop at the Google screen.
Have you guys have any advice for me?

spectre85 said:
is your phone encrypted?
are you running stock recovery?
are you running a stock Rom?
have you done a factory reset yet?
Click to expand...
Click to collapse
For me, no, no (CWM Touch 5.8.0.2), yes (stock rooted 4.0.4), no but my goal is to restore my data not erase it.

I had this happen to me before, what I did was flash a factory image through fast boot and it was fine after.
Sent from my Galaxy Nexus using xda premium

Thanks guys..I flashed the factory image through Fastboot mode and the phone works perfectly again! Too bad I lost all my data, but I'm happier that I have my phone fully functional again

You can't access your backup right? There's no way you can copy the file to your desktop?

mohitrocks said:
You can't access your backup right? There's no way you can copy the file to your desktop?
Click to expand...
Click to collapse
I did copy it. I have full access to the file. Also, just fyi my goal here is not just to get to working state (I'm aware of the stock images) but to actually recover my data. My phone is currently on stock images completely blank and working now.

Fast boot flash the nand images just like u did the stock ones.
Sent from my Galaxy Nexus

bwcorvus said:
Fast boot flash the nand images just like u did the stock ones.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Nanadroid files can be flashed in fastboot? Are you sure? First time I'm hearing this. Doesn't fastboot need .img files? These are .tar files.

Open it up and see if its image...sorry all my recoveries use images.
Sent from my Galaxy Nexus

bwcorvus said:
Open it up and see if its image...sorry all my recoveries use images.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I guess it depends on the recovery version you use. I remember older versions actually had .img files. However 5.5.0.4 and Touch 5.8.0.2 both have ext4.tar files.
Which version of recovery do you use?

If you have root, you can restore your data partition using Titanium Backup. Use "Export from Nandroid Backup" within TB, select the nandroid backup and then select all apps that you want to restore

Immix said:
If you have root, you can restore your data partition using Titanium Backup. Use "Export from Nandroid Backup" within TB, select the nandroid backup and then select all apps that you want to restore
Click to expand...
Click to collapse
Interesting...will this include settings as well like my home screen icon/widget layout, wallpaper, etc?

open1your1eyes0 said:
Interesting...will this include settings as well like my home screen icon/widget layout, wallpaper, etc?
Click to expand...
Click to collapse
Yes. Titanium Backup can restore all your system apps as well as downloaded apps from a nandroid backup. Not as clean as a nandroid restore from CWM but essentially the same thing. But try to see if Titanium Backup can extract your nandroid backup. It all depends on what exactly went wrong with your nandroid backup to begin with. I don't think it restores cache. So not sure about wallpaper.

Immix said:
Yes. Titanium Backup can restore all your system apps as well as downloaded apps from a nandroid backup. Not as clean as a nandroid restore from CWM but essentially the same thing. But try to see if Titanium Backup can extract your nandroid backup. It all depends on what exactly went wrong with your nandroid backup to begin with. I don't think it restores cache. So not sure about wallpaper.
Click to expand...
Click to collapse
You're right. This works great for restore data to select apps (got my notes and game saves back). I think the icon layout is held in the launcher settings, I'm about to try and restore the data to the launcher app and see what happens. I'm making a CWM backup of first of my current state (that's assuming this backup will actually work).
EDIT: Yes! That did it! Widgets position weren't saved but it's ok I only had a few so I manually put them back. Thank you! I never knew TB had the ability to work with nandroid backups.

I guess this now just leaves me figuring out what went wrong with the CWM backup. It happened twice (I have two backups from the same day that won't restore). Does anyone else use CWM Touch 5.8.0.2 and have successful backups? I would experiment to see if it works now but I don't want to end up with a corrupt backup and redo everything again.

Yes with me its the same thing my data its corrupt is even worse every time I do a nanobackup and restarted my phone the phone freezes on the boot logo and I have to go back to recovery trying to use my backups but I can't so I have to flash a new from again and start from the beginning again!!!! Anybody here has the same experience with that ???

So AGAIN, I'm having the same issue. This time on a recovery 5.5.0.4 that used to work for me when I originally got my phone. I think either my data partition might be too big or something but this really needs to fixed pronto. Anyone know how to contact Koush directly in regards to this matter?

Nandroid Backup Question

So heres a noob question.
If I use (Rouge currently) to do a "backup" under options. And then start flashing ROMs, if I restore that backup I did, does that get me 100% back to the point of when I did the backup? Meaning, it restores -everything- like it never happened?
I've always wondered this, so if I'm flashing things, I can always get back to my fully stable setup exactly like it never happened by restoring? Or does the backup via Rouge( or CWM, or whatever ) only back certain things and I'll have to do more setup after restoring to get back up and running exactly like I had the phone before?
Sorry for the noob question, just want to make sure I got this straight.

It will restore everything 100%. You also have the option to restore other partitions separate, system, boot, and the most important , data.
Sent from a phone with kNOw CIQ ...

TeamERA said:
It will restore everything 100%. You also have the option to restore other partitions separate, system, boot, and the most important , data.
Sent from a phone with kNOw CIQ ...
Click to expand...
Click to collapse
This is what I assumed, thank you for the confirmation!

Here is a follow up question:
If I do a Titianium Backup for apps and sys data. Then I flash a new ROM, I usually do a Titanium restore of both Sys and App data ... It gets me up and running the quickest.
1.) Is this safe, or will sys data mess with the ROM
2.) Is there a better, more supportable way to do this?

RubenRybnik said:
Here is a follow up question:
If I do a Titianium Backup for apps and sys data. Then I flash a new ROM, I usually do a Titanium restore of both Sys and App data ... It gets me up and running the quickest.
1.) Is this safe, or will sys data mess with the ROM
2.) Is there a better, more supportable way to do this?
Click to expand...
Click to collapse
1) It's always best NOT to restore system data when flashing a new rom. All your system data is specific to the rom you are flashing, so you don't want anything to conflict with the new data you are using now. Will cause a lot of problems in the long run.
2) TB is the best way to restore apps and apps+data that I know of. MyBackUp Pro is another good one, but TB works best for me. I'm sure there are others in the market also.
And I moved this to the Q&A section.

Well, this is what I thought too in fact I rooted my phone, installed CWM and the next step I performed was a nandroid backup thinking I could get my stock setup back if I ever wanted it. All was good. Then I flashed for a while and found a setup I liked and before proceeding I did another nandroid. THEN a while later I got to a point were I found myself, for time purposes wanting to fall back to my second backup so I thought: "hey, lets try restoring from this nandroid file I so maticulously spent time creating"!
That's when, for me at least, this whole nandroid Backup/Restore exercise falls on its face. Because when I tried to restore the backup I made it gave me a MD5 error..and I know there's a workaround that you can use by modifying the file I think that's basically what your doing? I didn't try it, I figured if the file needed to be modified before it could be restored what was the point anyway.? I just used my plan B which was Titanium Backup.
Anyway I keep my eyes open for an answer to this mystery, I think it has to do with the different CWM versions from one ROM to the next? Still not sure though?
Oh and hopefully this post wont just get rudely deleted like my first post on the same subject did? I made the same mistake you have by posting in the "General" area instead of the Q&A section!

the only time I have had a Android fail for md5 was when I changed the name of the backup. so maybe that's what you did?

RubenRybnik said:
So heres a noob question.
If I use (Rouge currently) to do a "backup" under options. And then start flashing ROMs, if I restore that backup I did, does that get me 100% back to the point of when I did the backup? Meaning, it restores -everything- like it never happened?
I've always wondered this, so if I'm flashing things, I can always get back to my fully stable setup exactly like it never happened by restoring? Or does the backup via Rouge( or CWM, or whatever ) only back certain things and I'll have to do more setup after restoring to get back up and running exactly like I had the phone before?
Sorry for the noob question, just want to make sure I got this straight.
Click to expand...
Click to collapse
I have done many restores and everything comes back just like it was before.
---------- Post added at 12:40 PM ---------- Previous post was at 12:28 PM ----------
RubenRybnik said:
Here is a follow up question:
If I do a Titianium Backup for apps and sys data. Then I flash a new ROM, I usually do a Titanium restore of both Sys and App data ... It gets me up and running the quickest.
1.) Is this safe, or will sys data mess with the ROM
2.) Is there a better, more supportable way to do this?
Click to expand...
Click to collapse
I only use Titanium backup to backup and restore specific apps on my phone. I use CWM for the system.

patrao_n said:
the only time I have had a Android fail for md5 was when I changed the name of the backup. so maybe that's what you did?
Click to expand...
Click to collapse
nope. I followed step by step...pretty hard to mess it up with qbking77 video's? Is there any other possible reason, you can think of?..and really, how many people test out thier restores? I'm just wondering?

Just one quick point of clarification regarding the Nandroid backup/restore. From what I've read, the restore will bring back your kernel and ROM but NOT the modem version. If the modem is important to you you'll have to flash that back separately.

Magicspell said:
Just one quick point of clarification regarding the Nandroid backup/restore. From what I've read, the restore will bring back your kernel and ROM but NOT the modem version. If the modem is important to you you'll have to flash that back separately.
Click to expand...
Click to collapse
Good point ... Thanks to everyone for the replies, got a much better understanding on the backup/restore process in both cwm and titanium now ) Thanks!
One more question about the MD5 ... So you can not change the name of the backup of CWM? I didn't think name change would effect how MD5 is generated.

RubenRybnik said:
Here is a follow up question:
If I do a Titianium Backup for apps and sys data. Then I flash a new ROM, I usually do a Titanium restore of both Sys and App data ... It gets me up and running the quickest.
1.) Is this safe, or will sys data mess with the ROM
2.) Is there a better, more supportable way to do this?
Click to expand...
Click to collapse
You can also use your latest nandroid back up to restore data. I just tried this as a test with my wife's phone (i also did a separate back up in TB just in case) and it works well.
She was on one of Calks ROMs, and I wanted to switch her to the bare version of the ROM. I wiped data/cache/dalvik, installed the bare rom and rebooted. Once booted, I verified everything was gone (apps, contacts, sms, settings, ect). Then I went back to CWM and went to back up and restore->advanced restore-> restore data. When I booted back up, all her apps, contacts, sms, settings were back. I guess this would be a quick and dirty way to restore your stuff when jumping between a lot of ROMS.

s9amme said:
You can also use your latest nandroid back up to restore data. I just tried this as a test with my wife's phone (i also did a separate back up in TB just in case) and it works well.
She was on one of Calks ROMs, and I wanted to switch her to the bare version of the ROM. I wiped data/cache/dalvik, installed the bare rom and rebooted. Once booted, I verified everything was gone (apps, contacts, sms, settings, ect). Then I went back to CWM and went to back up and restore->advanced restore-> restore data. When I booted back up, all her apps, contacts, sms, settings were back. I guess this would be a quick and dirty way to restore your stuff when jumping between a lot of ROMS.
Click to expand...
Click to collapse
So just to be clear ... "Restore Data" in CWM is just Apps and Apps data, no system data is restored correct?

RubenRybnik said:
So just to be clear ... "Restore Data" in CWM is just Apps and Apps data, no system data is restored correct?
Click to expand...
Click to collapse
Yes on apps and data.

ICS update without full wipe

Hi,
excuse, my english is very rusty.
I've IceColdSandwich v 8.6-AOKP on my DHD.
Unfortunately my Camera app doesn't work.
Because of that, I would update to v.8.8, but I've configured my home screen very good for me.
Therefore I want to keep this configuration. So, I don't wanna lose this configuration of the home screens.
Is it possible to jump to v8.8 without full wipe?
If so, what steps do I have to?
Thank you.
Hans

firestone3112 said:
Hi,
excuse, my english is very rusty.
I've IceColdSandwich v 8.6-AOKP on my DHD.
Unfortunately my Camera app doesn't work.
Because of that, I would update to v.8.8, but I've configured my home screen very good for me.
Therefore I want to keep this configuration. So, I don't wanna lose this configuration of the home screens.
Is it possible to jump to v8.8 without full wipe?
If so, what steps do I have to?
Thank you.
Hans
Click to expand...
Click to collapse
Yes, you can dirty flash the 8.8 ICECOLD. ("dirty" means without wipe.. so just flash.if you have a custom rom my guess is you know how to)
But I'd recommend to do a backup for any case. And than try to flash the 8.8. (again, I guess you know how, if not , ask.)
You can also perform a system backup with titanium\mybackup , but its not advices.
But again perform a NAND backup . If something will go wrong you'll have a working and configured version .
good luck

Hi tripleR,
what means NAND?
I have already made ​​a backup with Titanium. I have backuped "save all new user- and systemfiles & new Versions".
Is this ok?
THX

A NAND backup is performed from recovery and takes a single backup of the whole system. If something goes wrong, you can restore the NAND backup and you will be back to exactly the same point you were at when you took the backup. If you try 8.8 and it doesn't work, just restore the backup and you'll be back on 8.6.
A backup with titanium backs up apps and settings but runs from the ROM itself. If you are performing system changes then titanium may not be able to restore the necessary settings, so you may be stuck with the problem.

It means, that you should do a backup in your recovery. (You should always have one, because if something goes wrong, you can always restore this backup from your recovery).
I have used Titanium backup for a complete restore aswell.
But you should make sure, that your ROM is ok with this. ( I think there are ROMS, that don´t recommend this).
If you just switch the Version of the Rom, Titanium backup should work.
I did a complete wipe and restored with TB and it worked.

ok, but how I can take a NAND backup?
Can I take this in ClockworkMOD Recovery menu -> backup and restore -> backup?
If so, what is path to the backup? sdcard root?
Backups the NAND backup all apps and settings (e.g. home screen)
Thank you very much.

firestone3112 said:
Hi tripleR,
what means NAND?
I have already made ​​a backup with Titanium. I have backuped "save all new user- and systemfiles & new Versions".
Is this ok?
THX
Click to expand...
Click to collapse
It might be, but NAND is for sure. and it brings your rom to the point as you left it.
1. go to recovery and do a backup.
2. dirty flash the 8.8 .
if everything all right your ok.
if anything going wrong at any point and you dont like it go to 3
3. flash the new rom with full wipe.
4.restore settings with titanium
everything ok ? huuura .somthing wrong ? go to 5
5.restore the back up.

Exactly.
It is saved in your Clockworkmod file on the SD.
You can simply choose it from your recovery and install it again. (You should also consider switching to 4ext recovery, but i think clockwork does the job as well)

firestone3112 said:
ok, but how I can take a NAND backup?
Can I take this in ClockworkMOD Recovery menu -> backup and restore -> backup?
If so, what is path to the backup? sdcard root?
Backups the NAND backup all apps and settings (e.g. home screen)
Thank you very much.
Click to expand...
Click to collapse
yes, ClockworkMOD Recovery menu -> backup and restore -> backup?
If so, what is path to the backup? sdcard root? sdcard\clockworkmod\backup
but you dont need it. when you'll go to restore it from the same place in recovery, in any point it will show it as it is.
And it back up all the rom exactly as it is. 1 to 1.

ok, I understand.
I take it now, but I am very anxious...
In german "I shut up the ass bake"
:fingers-crossed:
I will report.
Thank you very much

ohh yes, 4ext tool, that was what I had forgotten.
I think 4ext is better then ClockworkMod Recovery. Should I rather install and use this tool?
I am interested in the path of the backup, because I want to delete the backup afterwards?
It's not a good Iidea?
THX

firestone3112 said:
ohh yes, 4ext tool, that was what I had forgotten.
I think 4ext is better then ClockworkMod Recovery. Should I rather install and use this tool?
I am interested in the path of the backup, because I want to delete the backup afterwards?
It's not a good Iidea?
THX
Click to expand...
Click to collapse
I like 4ext more than CWM. You can install it by getting the app either from the 4ext site or buying it from the Play Store; the app lets you flash the recovery.
The backup is saved in the sdcard in the clockworkmod folder. I recommend, though, that you keep the backup. If you ever have problems with your current setup, you can restore it. I always back up before flashing anything.

I'm done and it all works wonderfully.
Also the camera works very well now.
I love dirty flashing!!!
The Version is IceColdSandwich v 8.8-AOKP now.
Thank you very much, all.

firestone3112 said:
I'm done and it all works wonderfully.
Also the camera works very well now.
I love dirty flashing!!!
The Version is IceColdSandwich v 8.8-AOKP now.
Thank you very much, all.
Click to expand...
Click to collapse
Congratulations! Be aware that, as a courtesy to the developer, don't report bugs in a dirty flash; if you have bugs in a dirty flash, do a clean flash and see if the bug is there, and only if it is should you report the bug.

ok, I'll do that but at the moment everything is working.
THX

Backup phone when flashing?

All,
I was wondering if there was a way to back up your Galaxy S3 applications and settings? I have been pretty happy with my CM10 build, but new ones of course always come out. Every time I flash and update the ROM, I have to manually install my Google play apps because I do not want all the apps i have downloaded back on my phone. Also, I did not know if i could backup like Nova/message settings and apply the backup every time I flash a new ROM? Thanks, let me know!

Pmart317 said:
All,
I was wondering if there was a way to back up your Galaxy S3 applications and settings? I have been pretty happy with my CM10 build, but new ones of course always come out. Every time I flash and update the ROM, I have to manually install my Google play apps because I do not want all the apps i have downloaded back on my phone. Also, I did not know if i could backup like Nova/message settings and apply the backup every time I flash a new ROM? Thanks, let me know!
Click to expand...
Click to collapse
ok so when u full wipe your phone and all that good stuff and you also backed up already flash your rom! then go back to the nandriod you just made and choose to restore data... BOOM! all your data/apps/messaging is still there!!
If your tooo lazy to do that use titanium backup search it on the playstore!

Is a nandroid backup through Clockwork or any app that I need to download? It does not make sense if I backup my current ROM and restore its data. Where can I find this? Sorry I am new to this!

Pmart317 said:
Is a nandroid backup through Clockwork or any app that I need to download? It does not make sense if I backup my current ROM and restore its data. Where can I find this? Sorry I am new to this!
Click to expand...
Click to collapse
The system (as in operating system) files are stored in the /system directory, this includes apps that are packaged with whatever ROM you are flashing. The /data directory is only user installed apps and their data, either from the market or other sources. I simply use titanium backup on a daily schedule backup my apps and also manually export my sms messages before a wipe. I also keep a copy of the titanium apk on my sd so i can copy it over to the the new ROM after flashing but before rebooting using a recovery based file manager. This way i can full wipe, flash, reboot, restore backups from titanium and be back to where i left off in under 10 minutes. It is also wise to keep a recent full nandroid backup just incase anything goes wrong during the process.

Thanks for respoding! Where do I go to make a nandroid backup? Titanium backup might be my best bet!

Pmart317 said:
Thanks for respoding! Where do I go to make a nandroid backup? Titanium backup might be my best bet!
Click to expand...
Click to collapse
From your recovery.

Is there a way to copy the .apk over to my sdcard or do i have to download a file somewhere on the internet?

Pmart317 said:
Is there a way to copy the .apk over to my sdcard or do i have to download a file somewhere on the internet?
Click to expand...
Click to collapse
I'm not getting your question what are you trying to say?

Pmart317 said:
Is there a way to copy the .apk over to my sdcard or do i have to download a file somewhere on the internet?
Click to expand...
Click to collapse
If you are speaking of an app that is already installed on your phone then you can simply copy the .apk from the /data/app folder, unless it is a system app then it would be in /system/app.

Pmart317 said:
Thanks for respoding! Where do I go to make a nandroid backup? Titanium backup might be my best bet!
Click to expand...
Click to collapse
jst do what i said above k so when u full wipe your phone and all that good stuff and you also backed up already flash your rom! then go back to the nandriod you just made and choose to restore data... BOOM! all your data/apps/messaging is still there!!
When it restores DATA it restores data from apps/games/ whatever data you have i always do this and i have all my messages and games still in my new rom

You have to install clock work mod recovery. To boot into cwm, hold volume up + power + home button as you are powering on your phone.
From there, go to backup and restore > backup. This should create a full backup of your data (settings etc.) but not things on your sdcard like music or pictures. To restore after flashing, go to cwm recovery > backup and restore > advanced restore > select your backup you made > /data
On another note, what's the difference between wiping (/data, /system /cache) > flashing rom > advanced restore /data and just flashing the new rom on top of old rom? Does the new rom not delete/overwrite the old ROMs files? Also, can you just wipe /system /cache and flash new rom? Sorry for hijacking thread. Lol..

Titanium Backup will not restore from Nandroid backup. HTC One m9 Nougat, Rooted

I cannot restore any apps from my nandroid backup onto my phone using Titanium Backup.
It opens the Nandroid backup correctly, and i can select apps to restore
It than says "Processing" for a while, and then skips to the last app and then says "Restore completed successfully", but no apps have been restored.
I cannot find this issue anywhere
Any help is welcome

Same issue

Depends what your selecting vs what you have permissions to do. Rooted? S-off? Restoring system apps? Restoring system settings?. Some things are not allowed to be restored.
Deselect all system apps, system settings, google apps and htc apps. You might have better luck.
Beamed in by telepathy.

shivadow said:
Depends what your selecting vs what you have permissions to do. Rooted? S-off? Restoring system apps? Restoring system settings?. Some things are not allowed to be restored.
Deselect all system apps, system settings, google apps and htc apps. You might have better luck.
Beamed in by telepathy.
Click to expand...
Click to collapse
Rooted
Trying to restore regular user apps
Nandroid Manager restores the apps but without data for some reason

Im willing to pay someone for a solution. I think this problem is device related in some way.

rodman55 said:
Im willing to pay someone for a solution. I think this problem is device related in some way.
Click to expand...
Click to collapse
The simplest way I found, make a TWRP backup of your current ROM, restore your nand-backup, from there make backups of the apps you need, then restore the TWRP backup of current configuration. From there u will be able to restore needed apps.
Or submit this bug to TB team and wait for a fix.

Fain11 said:
The simplest way I found, make a TWRP backup of your current ROM, restore your nand-backup, from there make backups of the apps you need, then restore the TWRP backup of current configuration. From there u will be able to restore needed apps.
Or submit this bug to TB team and wait for a fix.
Click to expand...
Click to collapse
My nandroid backup is half corrupted... The backup of the apps inside it are fine tho.

Not working for me either, which is a disappointment. Any solutions?

cjkbarnett said:
I cannot restore any apps from my nandroid backup onto my phone using Titanium Backup.
It opens the Nandroid backup correctly, and i can select apps to restore
It than says "Processing" for a while, and then skips to the last app and then says "Restore completed successfully", but no apps have been restored.
I cannot find this issue anywhere
Any help is welcome
Click to expand...
Click to collapse
Try to install different versions and everything will turn out ® Titanium Backup - {Mod edit: Link deleted. Oswald Boelcke}

Hi all, i never found a solution to the issue.
I assume by some huge coincidence that both of my backups (nandroid and Titanium backup) were both corrupt. I cut my losses and started fresh, and uses older backups where necessary

cjkbarnett said:
Hi all, i never found a solution to the issue.
I assume by some huge coincidence that both of my backups (nandroid and Titanium backup) were both corrupt. I cut my losses and started fresh, and uses older backups where necessary
Click to expand...
Click to collapse
after changing from cm13 to 14.1 Titanium wasn´t able to restore any regular app .... i´ve saved the apk-files from /data/app... installed them...reboot...then TitaniumBackup recognized them...restore only DATA . .. everything fine....