Related
I got a small scratch/paint chip on the black plastic near the usb port does anyone have any ideas on how I can fix this? I was thinking of using black nail polish.
Any other ideas would be appreciated.
Thanks!
Sent from my SAMSUNG-SGH-I897 using XDA App
Couple questions: is it on the rim of the charging port? I got one from removing my charge cable at an angle and it twisted and gouged the plastic on the way out, which leads me to my next question, is it deep? Like is it superficial or is it more like missing the gloss finish and possibly some plastic?
A usful product to have for glossy finishes is Displex, it works amazing on this phone. I am incredibly anal about high gloss finishes and blemishes showing up on them, even if i can only see them in direct sunlight. If you use this product with a cotton swab and gently but firmly rub in a circular pattern the scratches will go away very quickly, if you do it too much or too forcefully you may cause a bit of a clouding effect you can notice in strong light, so just do it for about 30 seconds and wipe it clean with a micro fiber cloth and do a little more, you should need a pea sided drop altogether, this will last for quite a while, just make sure you squeese the tube up and down to kind of mix it if it's been sitting a while. If the blemish is more of a gouge and not a fine scratch then this wont work as well, what it does is polishes the edges of the scratch down and fills in the bottom of the scratch with what's being polished smooth, so it works wonders for small problems, with larger issues you'll end up with a smooth ripple in the plastic as it will wear the hard edges down but obviously won't rebuild what's missing. I was reluctant to use it on my captivate cause it didn't do squat to my htc pure, but it performed remarkably on my captivate, just be methodical about how you use it and when you're done and your scratch is gone to your satisfaction be sure to put a little(and I mean little) on your micro fiber cloth or incredibly soft rag and buff over the area back and forth in one direction, for me that helped eliminate any cloudy effect and polish it back to a brand new phone shine. Just go into Google shopping and search for Displex, it's very inexpensive.
Sorry to repost so quickly but I forgot to mention about the nail polish, you can test it out but if it doesn't work I would be reluctant to use nail polish remover anywhere near the plastic on my captivate as it usually contains acetone which destroys plastic finishes usually, just put a drop on the surface of a cd, if it doesn't bother it you're probably ok, but I would still be reluctant. I'm a painter and have a lot of experience with solvents. The other possible issues with nail polish is it might not grip the phone well and depending on how thick it's applied might actually just pop off when it dries to be really hard. I tried it on my Fuze and it wouldn't cling to it at all; it also left a nasty seam and was just as bad of an eyesore as without it there, acrylic paints are easier to work with and dry very shiny but aren't always that hard, you'd need a type that mixes with a hardener as apposed to generic model paint, model paint takes considerable time to cure and wears down faster than the acrylic plastic of the phone.
Thanks for the advice my friend took a look at it and said its missing the gloss as the black finish came off and now there's a small white circle near the usb port.
I don't know how that happened as I always pocket the phone by itself and nothing else.
Sent from my SAMSUNG-SGH-I897 using XDA App
You may want to still try that polish I mentioned, sometimes with hard plastics like this the nick gives it a powdery look that looks worse than it is, if it's still relatively smooth but is an ugly blemish then it will most likely polish out to a high shine again and the white spot may go away. I don't know the process Samsung used for manufacturing but I was under the impression that they were solid colored plastic possibly with a protective coating over that, if I'm right then that white you mentioned should polish out. Best of luck whatever you decide to do.
So i just made myself the first? full body skin that covers everything from the back right up to the screen edge.
I made myself a "pr0totype" first to see if it would even work.
First attempt = Blue skin
Second and final attempt = Grey skin
What do you guys think?
It took me about 30minutes to do it.
I didnt use a knife to cut around the screen or camera.. i just used my thumb nail. silded it up and down the gap until it cut the vinyl.
For the speaker i used a knife to make a slit in both the holes.. then lifed the middle part up with a tweezer and cut the vinyl on both sides.
for the two ports i made a hole.. cut the excess off and put both, usb and headjack in to make it stick to the sides better.
as for the mic.. i used a needle to pierc the vinyl then lifed it up and cut the excess off.
oh also when i applied it, i heated it up with my fan heater and stretched it around the phone bit by bit while heating it up when needed... had to make sure there was no creases on the bezel because it would of just collected dust/ peeled off after awhile.
PS: I never remove my battery or sim
awesome.. would love to wrap my phone but never done it before. got any extra white vinyl u'd like to send me? hah
I got like 1 mile of different types of vinyl lol.
Its quite easy if you take your time. The best thing is that you can peel it off, heat it back up and reapply if you made any type of mistake... like creases or air bubbles.
Im pretty sure you can get small bits of vinyl from material shops. At first i used a thin type of vinyl.. I then tried a thicker type and found it much better... easier to cut since its not as flexible
RedBlueGreen said:
I got like 1 mile of different types of vinyl lol.
Its quite easy if you take your time. The best thing is that you can peel it off, heat it back up and reapply if you made any type of mistake... like creases or air bubbles.
Im pretty sure you can get small bits of vinyl from material shops. At first i used a thin type of vinyl.. I then tried a thicker type and found it much better... easier to cut since its not as flexible
Click to expand...
Click to collapse
is there a specific brand thats widely distributed that i could get in the US that you recommend? not sure where i could buy a small sheet of vinyl. also, is a blow dryer hot enough to heat up the vinyl?
Well its my Dad thats the expert. He uses http://apaspa.com
I live in the UK so i wouldnt know any places you could go other then material shops.
I dont know if apaspa sells small rolls.
When my Dad comes back ill ask him what type of vinyl it is.. All i know is that you shouldnt use banner vinyl because its very thin and flimsy.
Blow dryer should be fine.. just heat it up untill you can stretch it a little(like 1cm)... then place it down on the back of the phone while still holding it tight and mold it.. heat it up again if needed.
If you do get a small piece then i suggest you test it with small squares until you think you're ready
RedBlueGreen said:
Well its my Dad thats the expert. He uses http://apaspa.com
I live in the UK so i wouldnt know any places you could go other then material shops.
I dont know if apaspa sells small rolls.
When my Dad comes back ill ask him what type of vinyl it is.. All i know is that you shouldnt use banner vinyl because its very thin and flimsy.
Blow dryer should be fine.. just heat it up untill you can stretch it a little(like 1cm)... then place it down on the back of the phone while still holding it tight and mold it.. heat it up again if needed.
If you do get a small piece then i suggest you test it with small squares until you think you're ready
Click to expand...
Click to collapse
does the vinyl you use have some kind of adhesive on 1 side to stick to the phone better?
oh.. of course. Sorry i forgot to mention that lol..
RedBlueGreen said:
oh.. of course. Sorry i forgot to mention that lol..
Click to expand...
Click to collapse
wont it leave a lot of goop on your phone if u decide to remove the vinyl down the line?
depends.. If you buy cheap vinyl then most likely yes... but i dont think the cheap vinly would even work.. because it has to be stretched quite abit around the edges.
Im 100% sure it wont leave the phone sticky when you remove it IF you dont use the cheap vinyl.
If you're unsure of what vinyl you buy.. just stick it on something that has the same surface and leave it on there for a week or two... heat it up and cool it down a couple of times too.. for "real world use" then peel it off and see the results.
Edit:
Im probably going to change the color every now and then.. so i will post more pictures when i do... a week or two.
looks great!
but honestly tho, what IF you have to do a battery pull... example, ive been having kernel issues that is making me do battery pulls... what if you have an app that just freezes and your phone stops responding, requiring a battery pull.... just playing devils advocate here thats all
never happened to me... but if it did then id just remove it lol
Looks very sleak! Actually thinking about making a green one .
Questions:
How hot does it need to be so you can modify it?
(Thinking if it would change if the gnexus got very hot)
Does it break on removal?
How do the corners of it react to prolonged in/out of the pocket?
How thick is such a sheet?
Do you think it will work as protector when dropping the phone?
Dark3n said:
Looks very sleak! Actually thinking about making a green one .
Questions:
How hot does it need to be so you can modify it?
(Thinking if it would change if the gnexus got very hot)
Does it break on removal?
How do the corners of it react to prolonged in/out of the pocket?
How thick is such a sheet?
Do you think it will work as protector when dropping the phone?
Click to expand...
Click to collapse
The Nexus doesnt get got enough to change it. Even if you put it in front of a heater it wouldnt change since the vinyl is already applied to the phone
Yes it will. You have to pick at it and use a bit of force to pull it off. Once its off it will be deformed. Plus it wont stick back on properly.
its like you dont even have it on the phone.. it slips in and out like normal.
Its like as thin as paper but is more flexible and is more tougher
Its only to protech it from scratches really.. but if you do drop it, it will give better protection then if you had nothing on it at all.... by protection i mean scratch protection.
Looks like a giant phone condom
What shape/size was the piece you started with, in order to get no extra material at the corners after you folded it over the bezel?
Bump for Q
yomuppet said:
What shape/size was the piece you started with, in order to get no extra material at the corners after you folded it over the bezel?
Click to expand...
Click to collapse
sorry was on holiday.
it doesnt really matter. I cut the extra vinyl off with my nail. There is no way to make an exact piece that goes all the way around the phone and have no extra vinyl left over without cutting it off.
woah that looks awesome though! as long as you don't play with software when you have it on, shouldn't cause any problems. overheating doesn't seem to be an issue right?
mohawker2000 said:
woah that looks awesome though! as long as you don't play with software when you have it on, shouldn't cause any problems. overheating doesn't seem to be an issue right?
Click to expand...
Click to collapse
no issues at all.
I have this phone in black. I am interested in looking into "coloring" it. I would use a plastic based spraypaint for the battery cover, but I have no idea in what direction to go in for coloring the rest of the phone. I would be interested in making the sides a color very similar to the silver on the S3 and the front to be white. I know that I essentially just described the white variant of the S2, but what would be beautiful is that the samsung logo would no longer be visible and you would not see the buttons. Any ideas comments or concerns?
Most paints will scratch easily but if you have an airbrush they do have metalizer paints which do look similar to the chrome look your looking for
Sent from my SPH-D710 using xda premium
Im not extremely worried about scratching because i do not drop it much. Also, if i noticed it scratching easily in my pocket or whatever i could always re paint it and put an invisible shield on it
rizdog23 said:
Im not extremely worried about scratching because i do not drop it much. Also, if i noticed it scratching easily in my pocket or whatever i could always re paint it and put an invisible shield on it
Click to expand...
Click to collapse
Lol if you want to take spray pain to your phone go right ahead.. i can see a sprint tech already not wanting to work on it since its painted lol.. would look pretty nice though if it went smoothly.. but if painting it y go with somthin similar to whats already out? Might as well try to get an exchange for a white one lol
Sent from my SPH-D710 using XDA
I did something extremely similar to my Hero CDMA back before I got this phone and it went pretty smoothly(Can attach pics if requested) and Sprint had no problem repairing it when my End button went dead. I do not wanna spray paint the front of this phone however because it is covered by glass which the Hero was not.
I remember a thread earlier in the year where someone painted the battery door for a brushed silver look, though I couldn't find it. If my memory serves he had to wet sand with a super fine grit sand paper. I think it's not a bad idea to find a way to repaint in custom colors, or at least a variation not seen on phones. Interested in what you find out about this topic.
Yes I also saw the one about the battery door. He used sandpaper and chapstick haha. I was interested in doing a gunmetal silver also. I'm not usually a guy for color. I like simple variants of white and black on phones. I do know how to fix up the battery door as it is a separate part and it seems pretty easy, but I have no idea where to start with the shell and front. The shell might be decently easy once I disassemble if I use a non-water based paint made for light metals, but the front has me stumped. How can I get to it when it is covered by glass. I know the simple solution is to remove the glass, but after that does it go back on?
You could experiment with vinyl rather than paint on the front. I have ordered from metrorestyling.com before and they shipped fast.
I could use that on the sides too. Thank you so much for that.
Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Areebkhan said:
Alright so I'm sure everyone who has the leather back and has not put a cover on it yet can see that the leather back is getting dirty.
It might be just me but i have the brown leather back. The stitches have gotten blackish and not white like they were in the beginning and the back just keeps getting a darker shade!
Any of you guys try to clean it? If so how'd you do it?
Is it okay to take the back off and clean it under water?
Or should i use windex.
I don't wanna ruin the leather attempting to clean it!
Click to expand...
Click to collapse
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
I bought a cheap bottle of leather treatment from CVS for about $6. You spray two coats on it, and you're good to go. It actually gave the leather a nice, grippy-er, feel. And it helps protect from wetness. After that, you should be able to use any type of leather cleaner to keep it looking fresh.
Click to expand...
Click to collapse
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
chadbot3k said:
DO NOT USE WINDEX OR RUN WATER. That will ABSOLUTELY ruin your leather.
Click to expand...
Click to collapse
Quoted for emphasis. Definitely a very good thing that the OP asked.
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Areebkhan said:
HAHAHA!!
THANK YOUU!
I knew it was good to ask before doing something!
So cleaning it with that leather treatment gives it the shine back aswell?
Click to expand...
Click to collapse
Yes, it will keep your leather back looking mostly new. Most importantly it will protect against getting wet, which will stain your leather.
Any kind of leather treatment that adds a "shine" is no good in my eyes. I have had a few european luxury cars and i can tell you this...best thing i have ever used to clean my seats and other areas has been...BABYWIPES!!
Seriously it does not take away from the natural state or satin look of the leather and actually clean it very well. If it good enough for your babys ass.....its good enough for the skin on your phone!
You dont have to take my word for it though.
BTW got it wet today. there was a slight dark spot for a fe minutes but went away fully
Snakecharmed said:
I use Meguiar's Gold Class Rich Leather Aloe Cleaner followed by Meguiar's Gold Class Rich Leather Aloe Conditioner. Yes, I do my own auto detailing, and yes, I hate it when people use cleaners inappropriately and screw up whatever they were trying to clean. My parents are seriously guilty of that and it left me with cleaning-related faux-PTSD flashbacks decades later.
The G4's back wasn't shiny from the factory, but certain cleaners will produce a slight matte sheen on the leather.
Click to expand...
Click to collapse
These kinds of products are unavailable outside the US so we need alternatives.
What do you make of the advice given in this video ?
House hold items available in any country.
white vinegar to clean
shaving foam to remove ink stains
corn starch to remove grease
From the user manual
This product is made of cattle hide and may have different creases and patterns due to the properties of natural leather. If the product gets wet with any liquid (water, soda, seawater, rain, sweat, sunscreen, cosmetics, moisture, etc.), it may lose colour, change colour, or deform in shape.
When this product gets wet or contaminated, get rid of the water by pressing it gently with a dry towel, or wipe it with leather cream and leave it to dry in shade. When the product is exposed to a wet environment for a long time, it may cause creases or mould. The shape of the leather may not be restored to its original state after cleaning because of the properties of leather, and any contamination or deformity may get worse when using regular detergent or an organic solvent.
When the leather is wet with rain or sweat, use caution and avoid contact with clothes. It can cause any dye to become a stain.
Due to the nature of leather, friction for long periods of time or excessive force may damage the surface of the leather.
Click to expand...
Click to collapse
This is an important thread or there's going to be a few unhappy people later on.
I used new baseball glove condtioner.
Sent from my VS986 using XDA Free mobile app
what i got is you need a cleaner and then a conditioner.
the cleaner to remove stains and a conditioner to maintain the material.
Mr clean magic eraser to clean it. That's what we use in the automotive detailing world
Sent from my LG-LS980 using Tapatalk
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages. However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Snakecharmed said:
I don't know how I feel about the advice in the video. Those suggestions are very common, but I haven't tried them personally. People have conflicting things to say about the extreme acidity of vinegar against the mild acidity of leather, which is why you need to dilute the vinegar in the first place. One alternate suggestion I've read is to use Woolite 10:1 to 6:1 (water:Woolite). Another I've read is Dove soap. Don't use saddle soap, which has a pH level way too basic for leather cleaning.
What I can say is that you should use a soft terry or microfiber cloth to apply the cleaning solution, then wipe it off with a dry cloth. Don't apply a solution directly to the leather and don't apply too much at once. Even the moisture from a water-dampened cloth isn't the worst thing in the world if you're just quickly wiping on and off. Just don't soak the leather in anything, like running it under a stream of water. It's too porous to not absorb it. Once it's clean, condition it so you have some kind of protection from future stains.
Click to expand...
Click to collapse
Thanks. Even with various leather cleaners around its a tricky affair to do it properly for the layperson. Not impossible. As long as one is aware.
As clichéd as this sounds, an ounce of prevention is worth a pound of cure. I'm not a super clean freak, but I try to keep my hands clean when I handle the G4. I don't touch the back of it while eating and I try to keep it away from beverages.
Click to expand...
Click to collapse
hehe, this advice will fall on deaf ears as its impossible to follow. Force of habit. it no secret that keyboards and touch screens contain more bacteria than toilet seats
However, I'm planning to get a plastic back for the G4 as my regular back cover and only use the leather occasionally.
Click to expand...
Click to collapse
Bingo! thats is the conclusion i'm reaching too. The idea of leather is fantastic but if you want to look good then be prepared to put in the work.
Leather is just not that practical for day to day in a phone usage scenario..
But it looks so good <sigh>
One of the things I've learned in both buffing/polishing and interior detailing is to not work too large of a surface area at once. You don't want to let a product set or dry before you can work on it. The product ends up being harder to remove and/or stains your surface.
When it comes to patina, the issue for me is that the leather surface is small, so any marks will be more visible. I look at my travel wallet, which I haven't used much, and I'm annoyed that there is wear on one of its corners and the color has rubbed off. I'm far less concerned about a scuff on the seat in my car. Still, I don't own any leather furniture because of the upkeep required.
There are photos one of the Android Central staff posted of a used brown leather Moto X. I don't think it looks bad, and if it came that way out of the box, I don't think anyone would have thought it was dirty. If you're like me though, you like keeping things looking like new. I'm getting better about conditioning or protecting new leather products before wearing them or breaking them in.
The black leather G4 cover would be much more forgiving with stains, but aside from lack of carrier availability, I only would have preferred that version if it had contrasting stitching.
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
xbayyx said:
Can someone point me in the right direction? I'm a complete noob at this and have no idea where to start. I was thinking of getting the leather honey conditioner from Amazon, but still wasn't sure if that would be appropriate. No clue where to begin on cleaners. I have the black leather back btw
Click to expand...
Click to collapse
I've had a bottle of Leather Honey since about 2000 (before they changed the name), and that's what I used on my leather back. It didn't darken the tan leather (unfortunately), though it did make it a bit sticky for a bit. If you go this route, apply it sparingly before going to bed.
Since this is a thread about cleaning, I feel obligated to mention that product is for protecting leather only, although I believe the same company makes a cleaning product as well.
Hi all,
Have had my 10 since release day have had it in a case and screen protector since day one, both expensive ones too, tempered and a tech 21, now the tech 21 allowed a little bit of grit to get underneath the case and through pressure from my pocket or handling, the grit has etched a small scratch from the gun metal paint on the back at the top of the phone. I've now got a phantomskinz skin on it so it's covered but I wondered if anyone has ever matched the paint colour and type and attempted to either spray or touch up a mark?
There is no dents, literally just a chip from the paint, really annoyed me, tech 21 have been superb for me in the past.
I also have a friend who has dropped his literally the day he thought he didn't need a case and has a few scratches on the back, it was actually him who suggested painting it, at first I thought no way but thought I'd ask on here just in case anyone has ever committed to trying to paint their phone, htc 10 or not and how did you get along?
I'm sure we're not alone in having the odd scratch or two on our shiney htc 10s.
Any thoughts? Places who may do the job or what the colour or paint type is specifically? Is it treated? With what?,
Cheers [emoji106]
dladz said:
Hi all,
Have had my 10 since release day have had it in a case and screen protector since day one, both expensive ones too, tempered and a tech 21, now the tech 21 allowed a little bit of grit to get underneath the case and through pressure from my pocket or handling, the grit has etched a small scratch from the gun metal paint on the back at the top of the phone. I've now got a phantomskinz skin on it so it's covered but I wondered if anyone has ever matched the paint colour and type and attempted to either spray or touch up a mark?
There is no dents, literally just a chip from the paint, really annoyed me, tech 21 have been superb for me in the past.
I also have a friend who has dropped his literally the day he thought he didn't need a case and has a few scratches on the back, it was actually him who suggested painting it, at first I thought no way but thought I'd ask on here just in case anyone has ever committed to trying to paint their phone, htc 10 or not and how did you get along?
I'm sure we're not alone in having the odd scratch or two on our shiney htc 10s.
Any thoughts? Places who may do the job or what the colour or paint type is specifically? Is it treated? With what?,
Cheers [emoji106]
Click to expand...
Click to collapse
nice idea and would love to see how it turns out...
SacredDeviL666 said:
nice idea and would love to see how it turns out...
Click to expand...
Click to collapse
Aye, they'd look a lot better if we could just touch them up when they took a knock.
You could theoretically paint these all-metal phones pretty easily. You would, however, need to completely disassemble the phone to get just the back shell (in this case specifically) so that you could begin prep work on it for paint/powder coating.
You would first use a high grit sanding on it to rough the surface up for adhesion. Then you either:
a)apply paint
b)begin process of powder coat
Too much effort, in all honesty, for this device though. I've watched a fair number of tear down videos, and the 10 looks to be as bad, if not worse, than the M8/M9 to take apart. I have to replace my screen on my M8, to keep it for my new burner device, so I may take it entirely apart and paint it electric blue by hand. Either that, or do a high polish on it, and get it shiny.
thefoodman52 said:
You could theoretically paint these all-metal phones pretty easily. You would, however, need to completely disassemble the phone to get just the back shell (in this case specifically) so that you could begin prep work on it for paint/powder coating.
You would first use a high grit sanding on it to rough the surface up for adhesion. Then you either:
a)apply paint
b)begin process of powder coat
Too much effort, in all honesty, for this device though. I've watched a fair number of tear down videos, and the 10 looks to be as bad, if not worse, than the M8/M9 to take apart. I have to replace my screen on my M8, to keep it for my new burner device, so I may take it entirely apart and paint it electric blue by hand. Either that, or do a high polish on it, and get it shiny.
Click to expand...
Click to collapse
I wouldn't take the device apart to be honest. I think if the paint was matched a small brush could cover the scratches.
Anyone else got any ideas or suggestions besides tearing down and breaking out some spray paint.
[emoji21]
dladz said:
Anyone else got any ideas or suggestions besides tearing down and breaking out some spray paint.
[emoji21]
Click to expand...
Click to collapse
Plasti Dip it and tell us how that worked out
Sprint HTC 10 running BadBoyz
pelon90005 said:
Plasti Dip it and tell us how that worked out
Sprint HTC 10 running BadBoyz
Click to expand...
Click to collapse
No.
i have a few tiny specs of paint gone due to the same reason. barely noticeable but still now i know about them . . . .
exocetdj said:
i have a few tiny specs of paint gone due to the same reason. barely noticeable but still now i know about them . . . .
Click to expand...
Click to collapse
That's what I mean, it's the tiny blemishes that are the easiest to cover up but still annoying, if you get a scratch on your car you can get it resprayed or touched up same with paint on walls at home or pretty much anything I'm surprised that a service like this doesn't already exist.
What about a skin?
yldlj said:
What about a skin?
Click to expand...
Click to collapse
The OP mentioned using one already. Skins are basically stickers that'll fade and peel over time and the corners will start to lift in cases where you don't apply perfectly, like a screen protector.
To the OP, may sound silly but some car paint shops have machines that match a materials color down to the H/S/V and can supply touchup paint. Have you looked into that?
Sent from my HTC6545LVW using Tapatalk
richii0207 said:
The OP mentioned using one already. Skins are basically stickers that'll fade and peel over time and the corners will start to lift in cases where you don't apply perfectly, like a screen protector.
To the OP, may sound silly but some car paint shops have machines that match a materials color down to the H/S/V and can supply touchup paint. Have you looked into that?
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
I haven't mate, but I have to say I agree, ultimately something on a smaller scale would be ideal.
Have been quite busy these last few days but will be actively looking into it next week and may even price up some paint if I can match up the colour and type, I have a friend who does custom jobs (cars) so he may know more. Will let you guys know if I find anything worth mentioning.
Cheers for the idea.
yldlj said:
What about a skin?
Click to expand...
Click to collapse
I have a phantom skinz skin, which is solid and really stuck on there, looks great but defeats the object when you know there are blemishes or scratches underneath, if you were to resell the phone, a few scratches could really impact the price.