Back and forth between cases for the HTC One or a back skin (Ultra Crystal Screen Protector on the front). I have a Poetic Atmosphere case on the way, but wanted to try out a skin to see how it feels, looks, etc.
Ordered a back skin in black and white from i.Carbons and installed the black as figured it would not show marks as much as the white. It really looks good and feels great. Reading the product info on the package is that it is 3M tape.
Goes on very easy and had to reset it a few times to get the corners even on both sides. Cut outs for the camera lens, flash and "HTC" logo on the back all line up pretty well and it really looks nice on. The back is a 3-piece set as there is one for the top, bottom and then the large one for the middle. I only got the back but you can also get the side and front (I believe but I only was interested in the back as I don't care for the carbon fiber look on the front/sides).
I hate to put the One in case as it just feels so nice without one but wanted to protect against scratches. I use thin cases usually, so I'm definitely not looking for drop protection with the cases I have used on past phones.
Have to wait and see if the edges peel up and how it wears overall once I have it on for a few weeks. Might try it in the poetic case since that's set to arrive Monday.
Couple of pictures if this type of protection is what you are looking for.
I think that looks great. When will you throw the white one on?
Sent from my HTCONE using Tapatalk 4 Beta
Got any links? Really want to order one
Sent from my HTC One using Tapatalk 4 Beta
Thanks for the review. Ordered mine asap.
http://www.icarbons.com/collections/htc-one
If you Google "icarbons coupon code" you should find some 15%-25% off code. When I ordered mine they were only running the 15% off but looks like they almost always have some type of code available if you spend 30 seconds on Google.
cntchds said:
I think that looks great. When will you throw the white one on?
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'm going to see how the black wears and I may never get around to installing the white if the black holds up.
iCarbons with Poetic Atmosphere Case
With Poetic Atmosphere case
That's sexy
Sent from my Nexus 10 using Tapatalk HD
eedsynin carbonic
That carbon fiber looks really good, how was the texture before you put it in the Atmoshere? Was it more slippery than the aluminum?
cassull said:
That carbon fiber looks really good, how was the texture before you put it in the Atmoshere? Was it more slippery than the aluminum?
Click to expand...
Click to collapse
Actually it provides better grip with the skin on than naked. The case is somewhat slick on the back but the tpu edging is softer so it seems to provide a fairly decent grip.
That looks **** hot. Just ordered a white one myself.
I just ordered the Black and Brushed Aluminum. You can use coupon code AT15 for 15% off your total order. I only ordered the back. They do look good. I had Ghost Armor on mine and pulled it off getting ready for these. Its looks terrible in comparison.
awtryau89 said:
I just ordered the Black and Brushed Aluminum. You can use coupon code AT15 for 15% off your total order. I only ordered the back. They do look good. I had Ghost Armor on mine and pulled it off getting ready for these. Its looks terrible in comparison.
Click to expand...
Click to collapse
Wow, missed Brushed Aluminium. That looks awesome. Grabbed that instead of the white. Also thanks for the code.
PSA: Don't bother with getting side vinyl if you're planning on using it with the Atmosphere. Since it's so tight to begin with, it's almost impossible to get it on without peeling off the sides.
Well my poetic did not last long.
Sent from my HTCONE using xda premium
Related
Hey guys I ordered two Elago Breathe Cases for the GS3 from Amazon. I purchased the Glossy White as well as a blue called Glossy Coral. They cost $9.99 each and since I have prime I got two day shipping for free. Here is the direct link for the cases for the GS3:
http://www.amazon.com/gp/aag/main?ie=UTF8&asin=&isAmazonFulfilled=1&isCBA=&marketplaceID=ATVPDKIKX0DER&seller=A23S71QXDZCPQA
I purchased the white one for myself and the blue one for my girlfriend. The cases are very thin and sleek. They feel great in the hand and do not add extra bulk to the phone. The top and bottom of the case is open so you wont get overall protection there, so be careful when handling it and not dropping it. There is a slight lip, but I don't think that it will keep the phone raised up enough off a surface if you lay the phone flat on the screen side. I would definitely recommend putting a screen protector on to be combined with this case. I had already purchased a screen protector the day I picked up the phone from the store, however Elago actually sells the case together with a screen protector from amazon as well. The prices for the two combined are $24.99, and the screen protectors from Elago are $8.99 alone. There are cut outs on the sides for the power button and the volume rocker. I feel that the cut outs aren't recessed enough, and your made aware of it however it does not bother me too much. Overall I am very happy with the cases especially for the price. I would definitely buy from Elago again, and I do like the variety of colors that they offer the cases in. I like the Breathe style because they are different than all of these other snap on thin cases and make the phone stand out more. I took some pics from various angles with both cases on the phone and off the phone with my dslr so you guys can take a look for yourselves.
nice review. how well does the phone stay in the case though? i've been hesitant with snap on cases because i'm afraid the phone will come out of it.
are they grippy or are they still really smooth? I am planning on getting a case only because the phone is so smooth i know i'm going to drop it eventually.
It's a great looking case though!
jnicks510 said:
nice review. how well does the phone stay in the case though? i've been hesitant with snap on cases because i'm afraid the phone will come out of it.
Click to expand...
Click to collapse
Thanks! The phone is snug within the case. It hasn't come out of the phone. It fell earlier today, and the case popped off but i've had that happen with other cases though. When it fell, there was not damage to the phone. THANK GOD! LOL.
No1ustad said:
are they grippy or are they still really smooth? I am planning on getting a case only because the phone is so smooth i know i'm going to drop it eventually.
It's a great looking case though!
Click to expand...
Click to collapse
It is smooth but I feel like the perforated holes add grip while your hands are holding it. I used it all day yesterday and today so far and haven't slip because of it being too smooth.
I was hoping that the official vent case for the GS3 looked like the official case for the GS2 but they screwed the look up pretty badly. This one looks good but it needs that flashy silver plaque. Haha.
Although I felt the same way about the actual phone itself but the GS3 grew on me and is now the best looking phone ever. Maybe that official vent case will grow on me as well.
Had an elago s4 on my iPhone. Best case I ever had. Thanks for the review!
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Mines on the way. Thanks for the review. Went with the dark blue
davwman said:
Mines on the way. Thanks for the review. Went with the dark blue
Click to expand...
Click to collapse
what color phone do you have? please post pics
Blue
these are pretty much ALL on sale for $9.99 amazon prime now.
Those cases look cool might need to try them out....
I don't have the Elago Breathe but I do have the nornal, solid case. They're very thin and very good looking.
Sent from my SGH-T999 using xda premium
Must get dirty in the holes easy.
ikhtiaralam said:
I don't have the Elago Breathe but I do have the nornal, solid case. They're very thin and very good looking.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
What color combo? Please post pics
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
just ordered the metallic grey breathe case for $9.99 prime-shipped
Just ordered indigo blue for white Galaxy. I think the combo looks great.
dammit_dan said:
Must get dirty in the holes easy.
Click to expand...
Click to collapse
Actually it doesn't. I lay mines everywhere whole I'm at work and cat home and I haven't gotten anything in the holes yet. Plus the white hasn't gotten dirty yet neither. Very impressed with the case so far. I would definitely buy more from them.
Sent from sexy a** Galaxy S III
As you guys get your cases you should post some pics. It would be nice to see the true colors of the cases against the true colors of the phones. :thumbup:
Sent from sexy a** Galaxy S III
Thanks! used to have these for my old iPhone3G nice to see they're on sale now for my s3.
By the way for those of you worried that the case is slippery there's a soft feel version they sell as well that doesn't have the glossy back and has more a rubbery feel like a tpu case.
Sent from my SGH-T999V using xda app-developers app
got the metallic grey one. I LOVE IT. attached some pics.
Does anyone know where I could find some reviews of this case? Been holding off buying a case for a way too long and this looks promising
http://www.pure-gear.com/shop-by-ca...case-for-samsung-galaxy-s-iii-collection.html
Would anyone know where I could buy the coconut jelly version in the uk? I would be willing to make a video review on my youtube channel: youtube.com/polesp as a payment
I was waiting for the Musubo cases to come out, but decided to pull the trigger on the PureGear Slim Shell instead. I ordered the Black Tea one from this seller on eBay: http://www.ebay.com/itm/PUREGEAR-SA...t=LH_DefaultDomain_0&var=&hash=item2573f30cba
At $22.75 and free shipping, this is the lowest price I was able to find. It's out for delivery today, so I'll post a quick review within the next couple of days. I'm currently using a CruzerLite TPU case, as I'm not a big fan of dual layer (i.e., Otterbox, Ballistic, etc.) cases. The PureGear certainly seems like an interesting option.
kgbkny said:
I was waiting for the Musubo cases to come out, but decided to pull the trigger on the PureGear Slim Shell instead. I ordered the Black Tea one from this seller on eBay: http://www.ebay.com/itm/PUREGEAR-SA...t=LH_DefaultDomain_0&var=&hash=item2573f30cba
At $22.75 and free shipping, this is the lowest price I was able to find. It's out for delivery today, so I'll post a quick review within the next couple of days. I'm currently using a CruzerLite TPU case, as I'm not a big fan of dual layer (i.e., Otterbox, Ballistic, etc.) cases. The PureGear certainly seems like an interesting option.
Click to expand...
Click to collapse
Thank you! there are virtually no reviews out for this case which one are you getting? if it is the coconut jelly one would you be able to comment on whether the clear back leaves any marks on the back of the s3 (those big bubbles you get when plastic touches something), as postage to the UK takes 30 days your help is really appreciated
I was considering both Coconut Jelly and Black Tea, and ended up going with Black Tea. I know exactly what marks/bubbles you're referring to - my wife is using a CruzerLite translucent green TPU case on her white GS3, and the bubbles on the back are a bit unsightly. I came across a post on a different thread, where it was suggested to spread a small amount of talcum powder inside the case prior to putting it on the phone. Supposedly, it completely eliminates the bubbles.
We sell this case in store at TMobile ... they sell out fast... pretty nice case and a very functional holster
Just seeing if anyone has purchased one of these cases and how they compare to a diztronic or SGP color hybrid.
Thanks,
i wanted to buy this but kinda worry about the grippy rubber will easily get dirt and not washable. Also, how come there is no passion fruit color at all?????
Forget the case, look at the screen protector. Damn genius design...
looks real nice.
I like the Black Tea. Passion Fruit would've been soo much better had it had green trim rather then the blue.
I received my case and am definitely liking it so far, despite a couple of minor imperfections. I'll post a review this weekend, when I have the time to sit down and write one up. All in all, I give the case 8.5/10.
The rubber is hard, not the grippy kind. It doesn't trap dirt at all. The case is far superior to the CruzerLite TPU case that I've been using previously.
@Goobacks:
I agree, the design of the roll-on screen protector is absolutely genius. However, $25 is a bit too hefty.
kgbkny said:
I received my case and am definitely liking it so far, despite a couple of minor imperfections. I'll post a review this weekend, when I have the time to sit down and write one up. All in all, I give the case 8.5/10.
The rubber is hard, not the grippy kind. It doesn't trap dirt at all. The case is far superior to the CruzerLite TPU case that I've been using previously.
@Goobacks:
I agree, the design of the roll-on screen protector is absolutely genius. However, $25 is a bit too hefty.
Click to expand...
Click to collapse
did you get the coconut jelly clear version?? when u say the rubber is hard, is that the back too? will this prevent those unsightly bubbles?
thanks
I am looking at this case and wonder how everyone that got them likes it? Is it a slippery case? Holding up well?
grillheadxl said:
I am looking at this case and wonder how everyone that got them likes it? Is it a slippery case? Holding up well?
Click to expand...
Click to collapse
In the event you come back to this thread, my case is holding up like a champ. They are available on Amazon for around $15 nowadays, and it's definitely worth the money. I got the orange one for my wife, who always keeps her phone in her purse, and the edges accummulated black scuff marks all around the sides of the case. I have the black tea one, and it still looks the same as it did the day I bought it. Then again, I don't have a purse!
Not a bad case not real grippy got the coconut jelly ( clear ) I don't recommend the color it looks like it has 3 cracks ( really small ones ) rite above the 3 slots for camera speaker and flash but not bad for paying 17 bucks with shipping from cell guru
sent from the samsung galaxy airplane (i747)
kgbkny said:
In the event you come back to this thread, my case is holding up like a champ. They are available on Amazon for around $15 nowadays, and it's definitely worth the money. I got the orange one for my wife, who always keeps her phone in her purse, and the edges accummulated black scuff marks all around the sides of the case. I have the black tea one, and it still looks the same as it did the day I bought it. Then again, I don't have a purse!
Click to expand...
Click to collapse
Hi, I read a comment on Amazon about the white one where the reviewer says that the nubs didn't stop the case from scratching when the phone vibrated. Do you or your wife see this problem?
Thanks
trying to decide between this case and the incipio silicrylic
Ive heard not so good things about this case
Sent from my Galaxy S3 using neighbors wifi
1slow4G said:
Ive heard not so good things about this case
Sent from my Galaxy S3 using neighbors wifi
Click to expand...
Click to collapse
Ya Im setting mine aside as a back up case and using my casemate pop volume button r real responsive but the power button is kinda hard to press has lots of rough sharp edges at case seams and real very cheap and slippery
sent from the samsung galaxy airplane (i747)
If your a Nexus 5 purest or naked lover and are slightly concerned going naked even though you like the feel or if you just dont like bulky cases this could be the case for you and its only 3-4 bucks.
It's .3mm thin covers all sides except the small bottom portion and has all the appropriate cutouts along with the sim cut out and is semi transparent however you can not see the Nexus logo through the black one I have (but you probably could if you had the white N5 or a colored version of the case).
This case is probably not all that protective considering its thinness and has very small lay on the table design and it seems to only lift the rear camera lens a very tiny bit from the surface it rests on from what I can tell so all in all it will only really protect from is scratches and maybe small bumps.
As for feeling. It said it was a TPU but idk about that it doesn't feel like it it feels just like thin plastic, almost like those plastic folders from schools or offices, so it's bendable but not like standard TPU because I'm sure you could crease it if it was bent to much. The surface feels smooth but slightly rough (more smooth than rough) so it isnt as grippy as the naked nexus and can be slippery if your hands are dry. The bulk of it is almost non existent becuse it does really feel like there is nothing on the phone at all it feels the exact same size which is awesome for people that like the size of the phone and it fits pretty snug there's no give when gripping or squeezing the phone.
The only issues I would say it has is that the sides can be a little sharp (probably from the mold) and the bottom open section where your finger rests is kinda sharp too and since its not too too tight of a fit there, your finger can snag that section when you pull it away to readjust your phone. Im sure sanding can alleviate those things, but I have yet to try it. Also since its so thin the Volume and Power are pretty much flush with the cutouts for them so it can be a little hard to feel them.
Here are some pics!
*Notes
-I have a Nilkin Tempered glass Screen protector on
-The pictures of the case were taken with the N5
-The pictures of the phone in the case were taken with a galaxy tab (Thats why they suck) lol But its the best I can do!
-Purchase link http://www.ebay.com/itm/0-3mm-Ultra...d=100005&prg=1088&rk=2&rkt=4&sd=261366616351&
Nice review but whats the point in the review if there is no purchase link?
Diztronic all the way
Sent from my Nexus 5 using Tapatalk
zephiK said:
Nice review but whats the point in the review if there is no purchase link?
Click to expand...
Click to collapse
oops but dont get snappy I forgot it sorry lol I'll update the post.
Haha awesome, I was on another case buying craze a week or so ago and I ordered these exact cases as well (on Jan 2nd). I'm not a TPU case fan (hardshell all the way), but when I saw .3mm I said screw it, why not? I figured it's basically a skin and not really a case. So it should still appease my "next to nothingness" criteria.
I ordered all of the colors except pink and purple (so like 7 cases :laugh. When I get them I'll do a review with pics as well. I'll add them to your thread or start a new one depending on how long and pic heavy the post ends up being.
Cheers for the initial impressions. :good:
mmmmBACON said:
Haha awesome, I was on another case buying craze a week or so ago and I ordered these exact cases as well (on Jan 2nd). I'm not a TPU case fan (hardshell all the way), but when I saw .3mm I said screw it, why not? I figured it's basically a skin and not really a case. So it should still appease my "next to nothingness" criteria.
I ordered all of the colors except pink and purple (so like 7 cases :laugh. When I get them I'll do a review with pics as well. I'll add them to your thread or start a new one depending on how long and pic heavy the post ends up being.
Cheers for the initial impressions. :good:
Click to expand...
Click to collapse
Yea Id call it more a skin aswell but it sounds good to me! Id love to see the other colors and how they look cause I may buy more! haha
So this one has no lip above the screen at all, rather unique for a case. One problem I have with the case lips is they interfere with gesture that use the left/right edge, like moving a shortcut between home screens. Still I would prefer to have lips on top and bottom to protect the screen when I put it upside down.
cf18 said:
So this one has no lip above the screen at all, rather unique for a case. One problem I have with the case lips is they interfere with gesture that use the left/right edge, like moving a shortcut between home screens. Still I would prefer to have lips on top and bottom to protect the screen when I put it upside down.
Click to expand...
Click to collapse
It does have a lip all around except for the bottom part of the phone. Even with my tempered glass protector there is a very small lip so without it im sure the lip would be more significant.
and there go my efforts to try and control my case addiction...
Bought the white one, why not for not much over £1!
Link for UK buyers: http://www.ebay.co.uk/itm/Ultra-Thi...over-Skin-for-LG-Google-Nexus-5-/231127928810
EddyOS said:
Bought the white one, why not for not much over £1!
Link for UK buyers: http://www.ebay.co.uk/itm/Ultra-Thi...over-Skin-for-LG-Google-Nexus-5-/231127928810
Click to expand...
Click to collapse
Thanks. Was just about to post "Does not ship to United Kingdom "
I already bought one it's still on its way, now I see your pics I want to buy another one!
Sent from my Nexus 5 using xda app-developers app
bradputt said:
I already bought one it's still on its way, now I see your pics I want to buy another one!
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Does it include the screen protector? Or it is sold separately?
w1n4rt0 said:
Does it include the screen protector? Or it is sold separately?
Click to expand...
Click to collapse
Sold seperately
Case looks pretty good, does it scratch the corner of the N5 when you remove it like the Ringke slim does?
From your pics it appears the case is not really see through like the ebay pics make it seem, is that right?
mmmmBACON said:
Haha awesome, I was on another case buying craze a week or so ago and I ordered these exact cases as well (on Jan 2nd). I'm not a TPU case fan (hardshell all the way), but when I saw .3mm I said screw it, why not? I figured it's basically a skin and not really a case. So it should still appease my "next to nothingness" criteria.
I ordered all of the colors except pink and purple (so like 7 cases :laugh. When I get them I'll do a review with pics as well. I'll add them to your thread or start a new one depending on how long and pic heavy the post ends up being.
Cheers for the initial impressions. :good:
Click to expand...
Click to collapse
Ordered all 10 colors. It's cheap, looks nice, so why not?
Until now I ordered over 30 cases for my N5. Talk about a case buying craze
Raistlin1 said:
Case looks pretty good, does it scratch the corner of the N5 when you remove it like the Ringke slim does?
From your pics it appears the case is not really see through like the ebay pics make it seem, is that right?
Click to expand...
Click to collapse
Nope it shouldn't because its not a hard plastic its more like a thin aslmost flimsy/rigid/semi-stiff plastic.
And yea the black semi transparent doesnt let the Nexus lettering come through but Im sure with the colored ones it may show a bit easier and the white nexus may show better than the black but I'm not to sure.
Znamir81 said:
Ordered all 10 colors. It's cheap, looks nice, so why not?
Until now I ordered over 30 cases for my N5. Talk about a case buying craze
Click to expand...
Click to collapse
Hahaha wow lol
Raistlin1 said:
Case looks pretty good, does it scratch the corner of the N5 when you remove it like the Ringke slim does?
From your pics it appears the case is not really see through like the ebay pics make it seem, is that right?
Click to expand...
Click to collapse
What mystery 10th color are you talking about???? I only ordered 7 of 9.
Sent from my Nexus 5 using xda app-developers app
Hello Please share your thoughts on the nillkin screen protector
Hey everyone! Have anybody tried these dbrand skins yet? They were really popular among the nexus 4 users. Would love to know if anyone have tried it on their One yet. https://dbrand.com/shop/oneplus-one
Sent from my One using Tapatalk
i'd get one but dbrand doesn't recommend using it on the black edition of the OPO (and im sure most people own the black sandstone over the white one)
toge64 said:
i'd get one but dbrand doesn't recommend using it on the black edition of the OPO (and im sure most people own the black sandstone over the white one)
Click to expand...
Click to collapse
Don't really have the choice when OnePlus sends invites for 64GB instead of 16GB
dbrand makes awesome skins though. I feel that they should make a third party backplate to put the skins on.
nfl46 said:
I was planning to purchase one but kept seeing the warning messages. I guess it would feel a little awkward against the back of the device.
Click to expand...
Click to collapse
Just kinda crappy because dbrand supports this phone and then no body buys it because it shouldn't be used on sandstone
I have dbrand skins on my nexus 5 and nexus 7. It feels odd not being able to get one on this device do I ordered just the camera skin. yeah it's tiny, but at least it's something. There a awesome company with a awesome product so I don't mind supporting them and getting such a small pointless skin on this device.
Sent from my One using XDA Free mobile app
Scythe024 said:
I have dbrand skins on my nexus 5 and nexus 7. It feels odd not being able to get one on this device do I ordered just the camera skin. yeah it's tiny, but at least it's something. There a awesome company with a awesome product so I don't mind supporting them and getting such a small pointless skin on this device.
Sent from my One using XDA Free mobile app
Click to expand...
Click to collapse
I considered doing the same thing, then I found out that even though the camera skin costs only 2$, the shipping itself is 3$...
I'm currently waiting for dbrand to do some sort of free shipping promo and then I'll order mine. I can't stand being a supporter without my phone even wearing a skin
P.S I had a black cf skin on my Nexus 4 for a year and loved it, gotta get something for my black OPO as well
Just ordered a white carbon fiber front, red carbon fiber back, and white camera cutout. Stoked to see them on this device.
Going to order a red carbon fiber camera skin , will look good with my black official flip case
Sent from my OnePlus One
I ordered just the white carbon fiber back, and in my opinion, it looks light-years better than the Sandstone Black. The sides are uncovered by the sticker, so you still get a fair amount of grippiness on the sides. Now, my OPO literally turns heads when I put it on a table. I highly recommend it, despite the warnings. I'll post pictures if there's any interest.
Here is how the mahagony wood looks like. I have the sandstone back and it was very simply to put on. I used a hair dryer to apply.
treChoy said:
I ordered just the white carbon fiber back, and in my opinion, it looks light-years better than the Sandstone Black. The sides are uncovered by the sticker, so you still get a fair amount of grippiness on the sides. Now, my OPO literally turns heads when I put it on a table. I highly recommend it, despite the warnings. I'll post pictures if there's any interest.
Click to expand...
Click to collapse
I'd like to see pics!
takhawaja said:
Here is how the mahagony wood looks like. I have the sandstone back and it was very simply to put on. I used a hair dryer to apply.
Click to expand...
Click to collapse
Love the look of this! Two questions, I heard that the bumper potentially messes up the sides of your phone, is that correct? And will these skins cause the sandstone to wear out in anyway?
Sent from my HTC One_M8 using XDA Free mobile app
I have a nexus 4 and have 2 dbrand skins for the back and I love them.
I will be buying the titanium with red camera insert skin cover. No front.
Sent from my Nexus 4 using XDA Free mobile app
takhawaja said:
Here is how the mahagony wood looks like. I have the sandstone back and it was very simply to put on. I used a hair dryer to apply.
Click to expand...
Click to collapse
This looks amazing, ordering now.
I had one for awhile and it worked great! I have a sandstone black too and it was fine. They give you alot of warnings not to use it on sandstone tho. I eventually took it off though. They only give you a back piece and it makes the sides look weird.
Hey fellas,
I've been searching around trying to find a clear transparent skin for 3T, but found nothing. I don't really want to get a dbrand skin or anything. I just want a clear one to see and protect our beautiful aluminium design. Any experiences?
Try gadgetshieldz. Quite cheap, precise cutouts and does a good job in protecting the device
I'm using the matte one on the back. It looks like nothing has been applied.
I'm using the Nillkin Nature case. It'll give some more protection than the gadgetshieldz (well, hopefully), plus I hadn't to mess aroud with the stickers.
So far, I'm quite happy with that.
Got it for £6.99 on Amazon.
king231 said:
I'm using the matte one on the back. It looks like nothing has been applied.
Click to expand...
Click to collapse
Where did you buy it from? I'm trying to find one but unable to find one
Yo, thanks you guys, already ordered the gadgetshieldz matte one. When I looked at their web initially i only saw same skins as dbrand, and didn't bother to look further. edirisinghe30's reply tho made me come back and chech again. and indeed it's quite cheap. Waiting for one to arrive. Can't wait
As for the clear case, I use it for months now. It's okay, but kinda hides the beauty of the metal. Also it started yellowing. I'd rather have my phone naked, but I'm afraid of scrathches. Whilst the demand for a wrap.
EDIT:
By the way, for those still looking, here's the link for a clear skin on gadgetshieldz.com
But this does not protect the phone from drops right?
Anyone tried to skin a black 3T? Nothing sticks to it. ?
Had to send my skin back. I used a Dbrand. But I know most sellers use the same 3m materials.
Sent from my SM-N920T using XDA Labs
The Apostle said:
Anyone tried to skin a black 3T? Nothing sticks to it.
Had to send my skin back. I used a Dbrand. But I know most sellers use the same 3m materials.
Sent from my SM-N920T using XDA Labs
Click to expand...
Click to collapse
I have the midnight black with dbrand skin. and it is sticking well. Which part of the phone doesnt stick?
i just checked mine, the only part that didnt stick well is by the buttons. I didnt take much time on those areas to ensure it fold and hold.
polobreaka said:
I have the midnight black with dbrand skin. and it is sticking well. Which part of the phone doesnt stick?
i just checked mine, the only part that didnt stick well is by the buttons. I didnt take much time on those areas to ensure it fold and hold.
Click to expand...
Click to collapse
The back sticks good with a decently amount of heat. The sides don't really stick at all. I ended up just razoring the sides off and left the back.
edirisinghe30 said:
Try gadgetshieldz. Quite cheap, precise cutouts and does a good job in protecting the device
Click to expand...
Click to collapse
mind sharing a pic?
I have a black 3t and ordered white leather back skin with the top and bottom parts black leather and I noticed the folds on the edges didn't wanna stick so I put a case around it for a couple days and once I took it off they were stuck and haven't had a problem since. It's a dbrand skin as well. I also got a slim clear case so u can still see the skin on the phone and just gives little more added protection. I love this phone and I definitely don't want anything happening to it.
Sent from my ONEPLUS A3000 using Tapatalk
I've just been using the same third party ass transparent TPU cover for the entire time i had this phone. It began to discolor so i doodled on it with a permanent marker. It looks messy but it's protected the phone so well. No scratches or dents whatsoever.