Develop Bugs

UPDATED W/PIX ROCK texture series Leather Case cover For Samsung Galaxy Note 10.1*

Well I just noticed my case was sitting on my porch. Da! :silly:
After opening it up I am pleasantly pleased.
The case is very slim. Picture 2 iPad smart covers with the tablet sandwiched in between.
The material is nice. Can't really explain what it is accept if you mated the iPad smart cover with some faux leather.
It feels great in my hand and looks good. I really like the slim design.
It is held in nicely with the four corner hooks.. Yes the pen is covered up with oneof the hooks, but the hook easily comes off and you have easy access to the pen.
The other 3 hooks hold the tablet tightly but the pen corner hook is not as tight allowing the access.
Both the typing angle and the up right angle are stable and I don't feel like it will topple over as I pushed on it.
Ports , buttons are all accessible and you can charge while the case is on and closed.
The case has the elastic band on its backside which you pull over the front to hold it closed.
I got the gray color which compliments the tablet nicely. Very professional looking.
I ordered it on the 29th-took 10 days.
Do I recommend it. Yes.
Would I buy it again? Yes.
I will update with pictures later.
http://www.ebay.com/itm/150890083058?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

Yeah, I bought one of these also in grey, but it hasn't arrived. Should come this week.
I like the thinness of the case.
However, I also got a Noreve case, as I think the top of the tablet is better protected.
That was my only critizism of the ROCK. There didn't seem a lot of protection on the side edges and the top of the case for the device.
What's your thoughts on this?
See the Noreve website: http://www.noreve.com/langue/en/product/Samsung_Galaxy_Note_10.1_Tradition_leather_case.html

Thanks
tonyz3 said:
Well I just noticed my case was sitting on my porch. Da! :silly:
After opening it up I am pleasantly pleased.
The case is very slim. Picture 2 iPad smart covers with the tablet sandwiched in between.
The material is nice. Can't really explain what it is accept if you mated the iPad smart cover with some faux leather.
It feels great in my hand and looks good. I really like the slim design.
It is held in nicely with the four corner hooks.. Yes the pen is covered up with oneof the hooks, but the hook easily comes off and you have easy access to the pen.
The other 3 hooks hold the tablet tightly but the pen corner hook is not as tight allowing the access.
Both the typing angle and the up right angle are stable and I don't feel like it will topple over as I pushed on it.
Ports , buttons are all accessible and you can charge while the case is on and closed.
The case has the elastic band on its backside which you pull over the front to hold it closed.
I got the gray color which compliments the tablet nicely. Very professional looking.
I ordered it on the 29th-took 10 days.
Do I recommend it. Yes.
Would I buy it again? Yes.
I will update with pictures later.
http://www.ebay.com/itm/150890083058?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Thanks for sharing, I'm looking forward for the pictures, I would really like to see how it looks, I know they have a lot of pictures in the posting but I would prefer to check one from customer...

globalgpj said:
Yeah, I bought one of these also in grey, but it hasn't arrived. Should come this week.
I like the thinness of the case.
However, I also got a Noreve case, as I think the top of the tablet is better protected.
That was my only critizism of the ROCK. There didn't seem a lot of protection on the side edges and the top of the case for the device.
What's your thoughts on this?
See the Noreve website: http://www.noreve.com/langue/en/product/Samsung_Galaxy_Note_10.1_Tradition_leather_case.html
Click to expand...
Click to collapse
I like the noreve case. But more than double the cost than the rock. Yikes.
It has enough protection for me to feel comfortable throwing it in my bag or brief case. I was looking for something slim at a good price that did not cover the bezzle. I figure there will be alot of cases coming out soon.

Yeah, I don't like to have my bezel covered either.

Looks pretty sweet I'm waiting for mine to get here thanks for the pics :thumbup:
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

i just got mine too brown color

Mine just arrived. Nice quality and feel. Fits well. Sturdier than I thought it would be in upright orientation. A little heavy.

Just got mine yesterday! I love this cover, very sturdy in any orientation. Quality of material is great the only thing is that it smells funny lol.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Just ordered one last night from casesinthebox yeah it was a couple bucks more but I hope it ships sooner than an eBay purchase. Anyone have any experience with them?
Sent from my SAMSUNG-SGH-I717 using xda premium

The only reason I try to avoid rubber band cases are because once they snap, your case is useless.
Would the band break? (is it secure?)

I have had this case for a week now and my band still seems secure. I use this case alot in everyday use
without the band so even if the band snapped which i doubt it will- it would still work.

Is it just the pictures or does the dark grey look like a very light grey?
Sent from my GT-N8013 using Tapatalk 2

I would say some where in between but more leaning towards the darker. Pix make it look lighter.

I've got the grey one from the local store.It's not a light grey.It's more like a graphite color.
The green one is a light green, kinda like ocean green.
The brown one is also a light brown.
The case is well-maded ,beautiful and thin but I think I will have to sell it because it's difficult to take the pen out.

freakmax said:
The case is well-maded ,beautiful and thin but I think I will have to sell it because it's difficult to take the pen out.
Click to expand...
Click to collapse
All I had to do was gently flex the tab outward and it will fix this, than put the tablet back in and the tab will now be easier to open and the tablet is still held securely.

tonyz3 said:
I would say some where in between but more leaning towards the darker. Pix make it look lighter.
Click to expand...
Click to collapse
I would say the grey case is 50% black. Print out a 50% tint to get the idea (assuming your printer is correctly calibrated )
Sent from my GT-N8010 using XDA Premium HD app

FOR SALE $20 in US
Hey if anyone needs a great case... I decided to get the Official Samsung Case for my note so i am selling this one for $20 or B/O which includes US shipping. PM if interested. Absolutely nothing wrong with this case. just decided to keep the otherone which i had preordered before i got the ROCK case. :laugh:

Hey tony. I just sent you a pm about the case.
Sent from my SCH-I535 using Tapatalk 2

Hello, I love this case, but I have a Nexus 10, which is actually similar to the Note.
Someone would have the chance to try the case in a Nexus 10?
Greetings.

Black Bumper for S3 (HQ pics) Recommend!!

Let me start this review just by saying that i love bumper cases. I
have been looking over the internet to find the best bumper case for
our Galaxy s3. I came across this case. Its a STRONG silicone bumper
that completes me in every aspect.
First of all. Its cheap. I think that everyone can try a cheap case
and if they dont like it, they throw it to their dog. (hehehe) Guys,
seriously. this is the best bumper case i have seen over the internet.
Why? It has a nice touch when you are holding your
phone. VERY nice touch. You will want to just hold your phone because
it has a nice feel Second of all: PROTECTION. And i mean it. Front,
back and sides are fully protected.
Front side (screen): the case has a slight bump on the edges so if the
phone drops the floor, its still protected (floor not the road hehe).
Back: Again, the case has a bump on the edges. So if your phone drops
on the back, protected!!! if you want to lay down your phone on a
table: PROTECTED.
Sides: Full protection, which is obvious why: its the case hehe.
Buttons: FULLy accessible button, both power and volume buttons. They
are covered by a soft silicone so there are very easy to press
(compare to the other tpu case i have reviewed)
I dont know if there are more colours available. You must check on
sellers ebay site.
Rating: If this case would be rated its a rock solid 5/5. Believe me
on this. It defenently worths every peny guys. I even compare it with
a TPU bumper case, that i have reviewed last week, amd this is by far
better.
Enjoy the pictures. I tried to take as many as possible.
I will review more bumper cases in the near future so stay tuned.
You can buy this on this link:
http://www.ebay.com/itm/Simple-Blac...620863?pt=PDA_Accessories&hash=item3f1b0aa03f
if you find this review helpful, hit thanks

Nice review! Around the volume rocker it might need a little work but I've already ordered one of these.. 4$ shipped to Canada and it looks decent.
Thanks for the review!

You will like the case mate, i guarantee you that. Feedback when you get it so everyone knows from you too

Good review, I have the white one. Easily the best case.
Owned a casemate brushed aluminum and SGP neo case
Sent from my Nexus 7 using Tapatalk 2

i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.

I have this case on my phone for a while and feels very steady guys. Note that i am snaping batteries daily, so the case comes on and off (by me i mean) and I havent got a problem so far.

Xcor3 said:
i have two of this. It comes apart easily, especially where the micro usb hole is. Very good review though. Waiting to get the sgp one because i too love bumpers
Click to expand...
Click to collapse
davpel said:
I love the idea of this case, but had a similar one for my Galaxy Nexus which fell apart in a matter of days. Would be interested in reading an updated review of this one in a few weeks.
Click to expand...
Click to collapse
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.

Its a single piece mate. Plus you dont lose any signal plus its a snap in snap out plus its veryyy cheap

How does this fit with a zag shield?
Galaxy S3 Paranoid ROM.

I think that with the zagg shield you will be ok. The case has already a tight fit so its better not to use extra protection underneeth. I dont think you need zagf shield for the back cover because its already protected from the case.

ponyboy82 said:
Do you guys mean the material of the case degraded? This is all one-piece right? I was JUST shopping for my first bumper case and saw some aluminum ones that snap or screw together, but it seemed like the TPU ones are just a single piece of material and wrap around the edges.
Click to expand...
Click to collapse
If it is anything like the one for the Galaxy Nexus (and it appears to be the same), there is a hard plastic material used on the rear portions of the bumper, while the piece which surrounds the screen is flexible rubber. With the GN, the two materials separated.

is it easy to take it in and out of your pant pocket

denny_1986 said:
is it easy to take it in and out of your pant pocket
Click to expand...
Click to collapse
yes its very easy dont worry.

Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity

PaulQ602 said:
Do these work with any charging dock? I ordered one today but just wondering ...
...sent from Infinity
Click to expand...
Click to collapse
i dont know for sure, but i think that it is going to work because the case is thin on the bottom. :good:

Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.

Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.

rlatjs17 said:
Do you think the the bezel or screen would get damaged if I dropped it from pocket height and it hit the corner on cement? Just wondering if I should still be extra careful when using this bumper.
Click to expand...
Click to collapse
if your phone hits a straight floor, then its protected. if ur phone hits the road it might be scratched. try to avoid the roads hahahaha :laugh:

dunderball said:
Thanks for the review, I ended up buying the same one but in white. I'm guessing they come from china because this thing isn't going to arrive for like three weeks haha. Oh well whatever.
My clear diztronic tpu case is starting to turn yellow and blue from my jeans so I really need something else. For three bucks I hope it holds up for a little while.
Click to expand...
Click to collapse
i got mine in less than 3 weeks becuase the seller shipped the case in an envelope (like a mail). for three bucks its a bargain.

Let there be bumpers

Anyone know if there is a chance of getting bumpers made for the One? This phone looks too good to cover up but it would be nice to have minimal protection.

rank78 said:
Anyone know if there is a chance of getting bumpers made for the One? This phone looks too good to cover up but it would be nice to have minimal protection.
Click to expand...
Click to collapse
I would expect to see the Poetic Borderline from Poetic. They had it for the N4.

Wow those are new to me, very slick.

The poetic borderline and atmosphere cases are under $10 on Amazon
Sent from my EVO using Tapatalk 2

surely those will look stupid with the phone's curved back?? :s

The borderline case looks a bit "stupid," especially on the top and bottom. The atmosphere in the other hand, actually looks really good. So good, I already ordered one.
Sent from my EVO using Tapatalk 2

eg1122 said:
The borderline case looks a bit "stupid," especially on the top and bottom. The atmosphere in the other hand, actually looks really good. So good, I already ordered one.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
hmm thats certainly a much more attractive option.
is the back just clear plastic though? why is the upper right one larger, there's a microphone there isnt there?
the only things that put me off getting a case is that a) the device gets bigger and b) it no longer fits into docks etc.

Case is completely clear except for the sides. And great the hole on the top right is bigger because if the Mic. As far as adding bulk, the case not as thick as you might think. I've seen these cases on the iPhone and it looks really good. I like the fact that its clear and the look of the phone is retained. Personally I just use a case when I'm not home or at work.
Sent from my EVO using Tapatalk 2

eg1122 said:
Case is completely clear except for the sides. And great the hole on the top right is bigger because if the Mic. As far as adding bulk, the case not as thick as you might think. I've seen these cases on the iPhone and it looks really good. I like the fact that its clear and the look of the phone is retained. Personally I just use a case when I'm not home or at work.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I hate cases but have to them for work only a bumper case might be cool tho.. nice to see your getting one EG
Sent from my EVO using Tapatalk 2

If you were to accidentally drop the phone while it had one of those Poetic Borderline cases on it, and it landed flat on its back, would the first thing to hit the floor be part of the bumper or part of the phone?

Shasarak said:
If you were to accidentally drop the phone while it had one of those Poetic Borderline cases on it, and it landed flat on its back, would the first thing to hit the floor be part of the bumper or part of the phone?
Click to expand...
Click to collapse
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.

Dharkan said:
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.
Click to expand...
Click to collapse
dont be so sure about the flip case
first impressions from those who have them are bad - shame really as I am getting one for free and the stand aspect is really nice.
ill be going with my usual very low profile case w/ screen protector combo and then after maybe 6 months take the case off!

djbenny1 said:
dont be so sure about the flip case
first impressions from those who have them are bad - shame really as I am getting one for free and the stand aspect is really nice.
ill be going with my usual very low profile case w/ screen protector combo and then after maybe 6 months take the case off!
Click to expand...
Click to collapse
The flip case will serve a purpose but I wouldn't have it for everyday use, its basically thick card with microfibre lining.

I've posted a few pics of the HTC Flip case
Check out my post. It's #849 http://forum.xda-developers.com/showthread.php?t=2187323&page=85

Dharkan said:
Of course bumper, check the design you'll see it clearly.
Bumper cases are nice but HTC's own flip case will look classy.
Click to expand...
Click to collapse
It's anything but clear in the photos that I've seen. On most phones bumpers certainly will protect the phone if it's dropped on its back, but most phones don't have anywhere near as much curvature on the back of the case as the One has - a bumper would have to stick out a long way at the edge in order to protect the middle.

DIABLO Tough Rugged Dual Layer Protection Case Cover with Build in Stand for*

Finally a case with a kickstand.
http://pages.ebay.com/link/?nav=item.view&id=261651683480&alt=web

*Finally, a rugged case.

PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
Amen! Mine should arrive next week!

That is one ugly case and does not look comfortable to hold at all.

I had one for the note 3. It really wasn't that bad.

Crisisx1 said:
That is one ugly case and does not look comfortable to hold at all.
Click to expand...
Click to collapse
PowerLemons said:
*Finally, a rugged case.
Click to expand...
Click to collapse
If only they didn't have a stand, I would totally get it. I want a fully rugged case that doesn't feel tacky and about to fall apart like the TUDIA Dual.

Fugly case, it's a shame spigen refused to step up and produce a case.

disk0360 said:
Fugly case, it's a shame spigen refused to step up and produce a case.
Click to expand...
Click to collapse
Seriously.. I'm mad at them.
Or their ultra crystal screen protector. I love those.
Sent from my Nexus 4 using XDA Free mobile app

Ugly or not I'm looking for more protection and I have one of these on the way. I'll take some good pics for you guys when it comes. I got the red version.
Update: case came this morning. It's not as ugly as I thought, but it is a tad thick where the kickstand is. Good protection.. Better than my Ringke fusion and Tudia. I'm at work right now but will get some pics taken and posted later.

I agree. Who cares what it looks like: function > form. Let me know how it works out I may purchase one also.
Thanks

Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.

Azlum said:
Ok here's the pics. I'm not happy with them but hopefully they will be good enough for you guys. I took them at work in a real hurry before my boss could appear and say "wtf are you doing?"
A few quick notes about the case:
-Good protection, higher edges around screen than my other cases.
-Power button feels pretty good but volume buttons are stiff and a bit mushy.
-Holes for the phone ports are of ample size.
-Case feels ok in my pocket but the thickness of the kickstand area IS noticeable even though I always have the screen side against my thigh.
-The kickstand is actually my first on any phone or tablet. It "locks" in the closed position with a snap. When trying to pull it out, it feels like it will break before it "snaps free" and folds out. Maybe it will, maybe it wont... I didn't buy the case for the kickstand anyway so I'm not worried about it.
Here's the pics.
Click to expand...
Click to collapse
Can you take a pic of the phone out of the case next to the case from the side, id like to see how thick it is compared to the phone.

Just ordered the white version, will come on standard shipping for around 7 days, no biggie while I wait for my TUDIA to arrive.
http://www.amazon.ca/JKase-DIABLO-R...&qid=1416026291&sr=8-4&keywords=jkase+oneplus

I had one of these on the RAZR i.
Not bad cases, can pop the rubber bit off and use just the hard shell.

Best hard cover Frosted Matte
Sended from china, 4 weeks wait, but very very good material !!
http://www.ebay.com/itm/Afan-Froste...t=US_Cell_Phone_PDA_Cases&hash=item27e8211eec

What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40

akiscoolio said:
What are the differences between this two cases?
www.amazon.co.uk/gp/aw/d/B00P6TT6FK/ref=mp_s_a_1_1?qid=1416596545&sr=8-1&pi=AC_SY200_QL40
www.amazon.co.uk/gp/aw/d/B00P1T3HOQ/ref=mp_s_a_1_3?qid=1416596471&sr=8-3&pi=AC_SY200_QL40
Click to expand...
Click to collapse
Don't think cruzerlite has this case... Check their site.
Sent from my OnePlus One using Tapatalk VIP

i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /

Threeoaks said:
i really hope other manufactures like spigen *cough* *Cough* support the opo, ive been using the nillkin snap one case and my opo fell from me a couple times and my bezel has taken the abuse : /
Click to expand...
Click to collapse
I don‘t think that manufacturers like spigen or otterbox will ever make cases for the opo they support devices that have more buyers like samsung or apple, anyway the most protective cases for opo are jkase diablo,diztronic ultra and tudia slimfit which do you prefer?

Awesome review.
tdamocles said:
I had one for the note 3. It really wasn't that bad.
Click to expand...
Click to collapse
that has got to be the best backhanded compliment i have ever heard. "wasn't that bad" I mean that is awesome. It's like saying, "well, the amputation went pretty well. He won't miss the limb at all."
I say this NOT sarcastically at all. I almost spit out what I was drinking because I was laughing so hard when I read this.

X-Level clear TPU case, for the minimalist case user! (Pixel 2 XL)

Just received some of the Clear X-Level TPU case I found and ordered, it is .78mm with clear matte edges all around that feel great in hand.
https://photos.app.goo.gl/YNDccnTmGaIv250z1
The case is similar to the 'MNML' case in that it does not provide a lip for the screen, but it does hug the screens curves to provide a bit more protection in case of accidental drops since it is made of TPU. Dont get me wrong, it is not not a drop proof case at all, but even thin TPU material can absorb more of an impact than hard plastic, and with a good screen protector you're set. The camera is also ever so recessed enough that it wont hit flat surfaces when placed on them. The buttons are also feel great and tactile.
The only thing that may bother some, but doesn't bother me since it isnt that noticeable from afar, is that even though it has the "dot buffer" most clear tpu cases have, it still shows some "water markings" where the case meets the back glass. This is likely because of how thin the case is, and how the back glass curves and melts into the 2 XL's corners. The case will also likely yellow and scratch over time, but that is why I got a small supply lol. I'll be able to swap them out as needed since it will be my daily for a while.
(On a side note) If anyone is interested I would also be wiling to sell some of the extra I have. I know it sounds like an ad for me to sell... but I just feel I got more than I needed.. and it seems these are hard to get in the US for some reason. So if you are just let me know, id do $12 shipped, first class, US. If you want more than one Id do a deal cause of shipping as well! If I have more than one left i want to sell that is lol

I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.

scottjal said:
I find matte finish slippery and like the cheap TPU L&K case on Amazon much better. They don't get much smaller than L&K.
Click to expand...
Click to collapse
It actually does. The L&K is about as thick as the Ringke Bevel. I had the "Pleson" version of it (theyre both the same just rebranded) and that is how thick it felt. The X-Level is .78mm thin.

Have a link for where you got it?
Sent from my iPhone using Tapatalk

zaydaboss said:
Have a link for where you got it?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.

Nocturnal86 said:
I don't, a buddy bought a small lot from gearbest I think. That's why I have more extras than I need.
Click to expand...
Click to collapse
Check your PayPal

zaydaboss said:
Check your PayPal
Click to expand...
Click to collapse
Check your PM's, need your address

Nocturnal86 said:
Check your PM's, need your address
Click to expand...
Click to collapse
Loving this case. Was concerned it would crack like the mnml ones it's tpu so that won't be a issue this will keep me from going commando I hate cases

You have a spare case to sell me?

rfuser said:
You have a spare case to sell me?
Click to expand...
Click to collapse
Just saw this, sent you a PM

What about sending one up north to Canada, eh?

evanwier said:
What about sending one up north to Canada, eh?
Click to expand...
Click to collapse
If you pay for shipping along with the case lol

eBay got the hook-up: https://www.ebay.com/itm/X-Level-Pu...-Slim-Armor-Clear-Soft-TPU-Cover/222698641914
It took 23 days to reach me in Los Angeles from China.
Just got mine yesterday and I love it. I've been on the hunt for a good clear case to show off the phone. I first had the Spigen Liquid Crystal but it added a bit too much bulk for my liking. This one is just thick enough to protect the rear camera lens when the device is resting face-up. My only complaints are that:
1. there is no lip to protect the screen if I want to set the phone face-down (seems to be common amongst slim cases), and
2. the cut-outs are a bit sharp from being unfinished (though really this is not a big deal for me).
The fingerprint reader cut-out is a bit off-center but at a glance it isn't noticeable for me.

Unfortunately after some time (2 weeks) case has weird bluish discoloration.
I'm assuming this came from holding my phone in pocket (jeans).
I have also Ringke clear case and same story, same discoloration.

been using this for more than half year, same as other tpu case, it will turn yellow as time goes by.