Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
nacraracer said:
Installed CyanogenMod 10, works very nice....but now no service and it shows my phone as a Galaxy Nexus. Please help.
Click to expand...
Click to collapse
Where did you get the rom?
gtdtm said:
Where did you get the rom?
Click to expand...
Click to collapse
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
nacraracer said:
http://www.youtube.com/redirect?q=h...D1u_dHgBUp1MdI7B8MTM3MDYyNjI3NkAxMzcwNTM5ODc2
That was build four. Build three does the same thing but it calls my phone a DIC2
Click to expand...
Click to collapse
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
gtdtm said:
Are you on Verizon? If so, you'll have to change your network mode. That rom has GSM by default I believe.
Click to expand...
Click to collapse
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
nacraracer said:
Tried that. Ended up going back with a stock ROM to get the radio to wok again. But I sure would like to install a much newer stable ROM. Any suggestions?
Click to expand...
Click to collapse
Try Chilly's pacman rom. It has CM10 plus a lot more. It's quite stable. I think you'll want the 4-20 version.
Try chilly's cm10 rom its the one im using and its the most stable of all his jellybean roms. Use aero's v15 ics kernel too and use smoothass govenor andcset ur min and max 2 higer than the original and clear ur dalvik cache using android tweaker 2 every now and again to avoid lagging and boot loops. Ive been on it or awhile using those settings and tweaks and it works great on cdma.
Related
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
No need to wipe anything but cache/dalvik when upgrading versions of the same ROM
ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?
?
stank656 said:
ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?
Click to expand...
Click to collapse
W
Yes works when it wants to!!!
icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth :::update::: flashed yesterday to 4.4, also not wiping/clearing ANYTHING, and all is good =)
founderbrn said:
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth
Click to expand...
Click to collapse
I'm hearing a lot of happiness about this ROM. Running CM9 Alpha6. I guess I can go give it a try. Do you all still have Airplane Mode being locked, or LOS? Ima go check out the thread too.
icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
4.4 is out if you didn't know yet
oshinqwe said:
4.4 is out if you didn't know yet
Click to expand...
Click to collapse
4.4 did not really change a whole lot...except the boot animation. I get the Airplane mode bug constantly when not on wifi
Sent from my SPH-D710 using xda app-developers app
Hey guys,
I'm currently running CM10 and I use my phone quite a lot. I got wifi and 3G on all the time, but I want to maximize the battery even further.
How can I? I only installed CM10 Rom.zip and flashed boot.img. Nothing about kernel (or does it do that automaticly by installing a rom...?)
Let me know!
Thanks!
Blackvibes said:
Hey guys,
I'm currently running CM10 and I use my phone quite a lot. I got wifi and 3G on all the time, but I want to maximize the battery even further.
How can I? I only installed CM10 Rom.zip and flashed boot.img. Nothing about kernel (or does it do that automaticly by installing a rom...?)
Let me know!
Thanks!
Click to expand...
Click to collapse
try this and feed me back:
install the NCX kernel v10 b1, the AOSP version http://forum.xda-developers.com/showthread.php?t=1873615, read carefully the steps to install, and wipe your cache
just complete a full charging cycle, which means drain the battery to 0% then charge it to 100% then start use ur mobile normally again, just tell me after a day of use, have u reached n3o's (the kernel creator) results?
Hossam.Abdelsalam said:
try this and feed me back:
install the NCX kernel v10 b1, the AOSP version http://forum.xda-developers.com/showthread.php?t=1873615, read carefully the steps to install, and wipe your cache
just complete a full charging cycle, which means drain the battery to 0% then charge it to 100% then start use ur mobile normally again, just tell me after a day of use, have u reached n3o's (the kernel creator) results?
Click to expand...
Click to collapse
Hi! I will try it.
Just a few questions..
1) Don't I need a Cyanogenmod10 boot.img, instead of the AOSP image ..? :s
2) Standard or extreme model?
Blackvibes said:
Hi! I will try it.
Just a few questions..
1) Don't I need a Cyanogenmod10 boot.img, instead of the AOSP image ..? :s
2) Standard or extreme model?
Click to expand...
Click to collapse
I took the standard edition and also flashed the modules. Wiped all cache and stuff, except reset user data.
It just booted and now it has screen 'android is being updated, app # of # is being optimized"
And now it booted.
Guess that is normal? Anyway.. I hope battery is better now!
Blackvibes said:
I took the standard edition and also flashed the modules. Wiped all cache and stuff, except reset user data.
It just booted and now it has screen 'android is being updated, app # of # is being optimized"
And now it booted.
Guess that is normal? Anyway.. I hope battery is better now!
Click to expand...
Click to collapse
great
sorry, i forgot to mention that the extreme is much better if you are looking for a better battery life
i would hit the phone with a thunder
matt95 said:
i would hit the phone with a thunder
Click to expand...
Click to collapse
made my day!!!!:good::good::good::good:
Honestly if you aren't looking for a jb rom you should go on with arhd 9.xx they're amazing in battery life but have the sense to it. upto you though
zainalabididn.syed said:
Honestly if you aren't looking for a jb rom you should go on with arhd 9.xx they're amazing in battery life but have the sense to it. upto you though
Click to expand...
Click to collapse
Yep, 9.xx is ICS based.
He needs 10&11 for JB.
And he needs a compatible CID for those...
Is he compatible I wonder........
Sent from my HTC One X using Tapatalk 2
chrisjcks said:
Yep, 9.xx is ICS based.
He needs 10&11 for JB.
And he needs a compatible CID for those...
Is he compatible I wonder........
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
I got CyanogenMod 10 with JB, so i'm pretty sure i'm CID compatible
And Will look into ARHD 10/11 Thanks.
Blackvibes said:
I got CyanogenMod 10 with JB, so i'm pretty sure i'm CID compatible
And Will look into ARHD 10/11 Thanks.
Click to expand...
Click to collapse
Nope, not necessarily. For the leaked Sense JB, you need to update the hboot, which means you need to have a matching CID.
u can use faux kernel which is just amazing, you can see some people up to 6 hours screen time with wifi on, don't know if 3g will make a huge difference though
Sent from my HTC One X using xda premium
After having a stable rom for a while, i decided to try a new one that has great reviews. however after flashing the new rom on my phone, there seems to be no connection to 4g, any insight or suggestions would be appreciated
hagop526 said:
After having a stable rom for a while, i decided to try a new one that has great reviews. however after flashing the new rom on my phone, there seems to be no connection to 4g, any insight or suggestions would be appreciated
Click to expand...
Click to collapse
Would help if you have some more information (ROM, Kernel) Are the using the correct APNs?
Sent from my Nexus 4 using xda premium
speedygonzo said:
Would help if you have some more information (ROM, Kernel) Are the using the correct APNs?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I was using the CM10.1 nightly 4.2.2 rom that was released for the GS3 on March 15.
can you make calls ? I would check your IMEI make sure it did not get lost.
saldebot said:
It sounds like you might have lost your IMEI, go into settings and make sure it is not on 0 or empty
Click to expand...
Click to collapse
I read about that, however my 3G was still working. it would just never go to 4G even at locations I always had 4G before.
after flashing have you ever saw the 4g icon ? if not I would go to the ROM thread and ask if it included in the ROM.
saldebot said:
after flashing have you ever saw the 4g icon ? if not I would go to the ROM thread and ask if it included in the ROM.
Click to expand...
Click to collapse
it was included in the rom, i even tried the •Jelly Bean 4.1.1 I535VRBLK3 Base from synergy and had the same issue. just went back to my Darthstalker X rom and it seems to be working again.
Well that sucks, but I am glad your 4G is back up and running. I have not ever flashed any CM10 when I had my S3 because of the losing IMEI crap instead I would flash AOSP ROM's and never had any problems. You may want to try one of those.
hagop526 said:
it was included in the rom, i even tried the •Jelly Bean 4.1.1 I535VRBLK3 Base from synergy and had the same issue. just went back to my Darthstalker X rom and it seems to be working again.
Click to expand...
Click to collapse
I believe most if not all have H* instead of 4g
Sent from my SGH-T999 using xda premium
Hi,
I've installed the stable version of Cyanogenmod 10.2 and I like it but I'm encountering some problems from time to time. First one is one I'm typing a text message it will suddenly freeze for about 5-10 seconds. The second one is lag when I try to get my phone out of standby mode or I just a black screen. The icons at the bottom of my phone light up but nothing else happens... Anything I can do about these problems? Or should I just try another clean install instead?
Thanks.
Try clean install, but 10.2 stable was the most unstable build for me.
Cm11 is just the opposite.
Sent from my Nexus 7 using Tapatalk
OK
atifsh said:
Try clean install, but 10.2 stable was the most unstable build for me.
Cm11 is just the opposite.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Ok, clean install it is. And does CM11 work better for you on your Nexus or on your LG?
Romands said:
Ok, clean install it is. And does CM11 work better for you on your Nexus or on your LG?
Click to expand...
Click to collapse
optimus g yes it works better on cm11 / mokee but there is Skype issue of sending video, i have yet to test it, but yesterday on cm11 people couldn't see me.
my nexus 7 is on stock and my tab2 is on mokee
i would try a different kernel if available.
Code-Craft said:
i would try a different kernel if available.
Click to expand...
Click to collapse
How would you do that if it was possible? And did a full clean install, no issues so far although it's too early to say.
Romands said:
How would you do that if it was possible? And did a full clean install, no issues so far although it's too early to say.
Click to expand...
Click to collapse
if there is a kernel dev that has an aftermarket kernel for your device you can just flash over the rom
Code-Craft said:
if there is a kernel dev that has an aftermarket kernel for your device you can just flash over the rom
Click to expand...
Click to collapse
Oh ok thanks, I'll look into it if it doesn't work out.
Did that work out for you? I'm having the exact same issues. I did do a clean install the first time, so I'm going kernel hunting...
Hi, what is the latest MIUI rom I can instll on my tmobile galaxy note 3?..
do I need anything special for it?
currently I am on HyperDrive RL 6.x
From Galaxysym's thread asking the same.
Thanatos355 said:
The one for the n9005 by Wonitor works great. Except that I can't get the GPS to work and after a while the Play store screws up completely and can't connect. I'm pretty sure that last part is somehow my doing, but I'm not sure how.
http://forum.xda-developers.com/galaxy-note-3/development/rom-miui-v5-wonitor-4-7-20-t2824436
Click to expand...
Click to collapse
thanks. downloading....
one more question...easy to go back to hyperdrive? if i dont like miui
maxximboy1 said:
thanks. downloading....
one more question...easy to go back to hyperdrive? if i dont like miui
Click to expand...
Click to collapse
Shouldn't be any issue at all. Periodically I'll try the latest version of that MIUI rom then go try some TW rom then usually end up back with PacRom.
No issues at all there.