Develop Bugs

[Q] New midNIGHT rom installation problem

Hi all,
I just tried to upgrade from midNIGHT 4.2 BYOR to 6.1 BYOR. Yes, I haven't updated my phone since March...I know, my bad. ;-)
So I went thru the proper steps in CWM recovery i.e... backup, wipe data x3, wipe cache, x3, wipe dalvic x3 & then installed the new rom. Installation shows it completes successfully & then I reboot the phone. Phone boots up fine & everything looks to be ok except for I can't open Settings>About Phone, it force closes. But everything else seems to be good. But that's not the big issue. When I power off my phone & try to boot back into CWM recovery to install the additional apps, it goes straight into backup & restore on auto-pilot. I've gone thru this process 3 times now. My phone is basically unusable like this.
I'm using CWM 3.0.0.6. Any ideas?

Your on an older clockwrkmod I'm sure that rom is not compatible with the older cwm update it 5.0.2.7 its a sticky in adroid dev. But to get past all this go ahead and odin back to stock ec05 and reroot with this recovery in its place this should solve any issues and you no longer have to wipe 3 times.
Oh no need to go back to stock but it would be helpful as it usually clears any bugs you may encounter.
Sent From My Cyan Samurai

Ah, that makes sense. Ok, sounds like a plan, man. Thank you! \m/

Don't go back in time move forward.
drums4life said:
Ah, that makes sense. Ok, sounds like a plan, man. Thank you! \m/
Click to expand...
Click to collapse
Why would you want to update to midnight rom 6.1 that rom is based on a gingerbread leak. You should upgrade to cm7 or ghe ei22 based roms. I believe the guy who does the midnight rom works with the dudes at ERA. If you want to support his Roms.

jamice4u said:
Why would you want to update to midnight rom 6.1 that rom is based on a gingerbread leak. You should upgrade to cm7 or ghe ei22 based roms. I believe the guy who does the midnight rom works with the dudes at ERA. If you want to support his Roms.
Click to expand...
Click to collapse
I see your point. I went with 6.1 because since getting & rooting my Epic, I've only used the midNIGHT roms. I enjoyed & had great results with earlier versions so I kept with them. But truth be told, I'm having continued issues after installing 6.1, even after reverting to EC05 stock & re-rooting.
So what would you recommend I check out?

drums4life said:
I see your point. I went with 6.1 because since getting & rooting my Epic, I've only used the midNIGHT roms. I enjoyed & had great results with earlier versions so I kept with them. But truth be told, I'm having continued issues after installing 6.1, even after reverting to EC05 stock & re-rooting.
So what would you recommend I check out?
Click to expand...
Click to collapse
Any of the ei22 roms are great... if you decide to go with an mtd rom make sure you read up on it first as there are a lot of changes and special things that need to be done when flashing themes and such (just mounting /system, nothing hard). All the ei22 roms (I've used them all) are very stable and very snappy! Just try em all out until you fall in love with one.... legendary is my favorite though...
Sent from my SPH-D700 using Tapatalk

I went with Legendary 2.2. Seems to be perty awesome so far. \m/ CyanogenMod looks good too. So what's the scoop on updating the kernel? I've already booted the phone, synced my account & installed some apps. Will it matter if I do it now?
Sent from my Epic using XDA App

drums4life said:
I went with Legendary 2.2. Seems to be perty awesome so far. \m/ CyanogenMod looks good too. So what's the scoop on updating the kernel? I've already booted the phone, synced my account & installed some apps. Will it matter if I do it now?
Sent from my Epic using XDA App
Click to expand...
Click to collapse
Nope just wipe cache and dalvik before flashing the newest kernel. The kernel has a script to do that but I just say do it for consistency.
Sent From My Cyan Samurai

Nope just wipe cache and dalvik before flashing the newest kernel. The kernel has a script to do that but I just say do it for consistency.
Click to expand...
Click to collapse
+1
I would check out the Samurai kernel I've had some real good luck with it and the developer is a machine

Indeed, Samurai it is. Updated to the most current stable version. \m/

drums4life said:
Indeed, Samurai it is. Updated to the most current stable version. \m/
Click to expand...
Click to collapse
That symbol looks familiar you listen to ITHEBREATHER?
Sent From My Cyan Samurai

drums4life said:
Indeed, Samurai it is. Updated to the most current stable version. \m/
Click to expand...
Click to collapse
i installed the legendary today, and replaced kernel with "shadow kernel 1.0.4" wow, this puppy is fast.

Biggoron said:
That symbol looks familiar you listen to ITHEBREATHER?
Sent From My Cyan Samurai
Click to expand...
Click to collapse
Are you referring to my avatar or to this..."\m/"?

drums4life said:
Are you referring to my avatar or to this..."\m/"?
Click to expand...
Click to collapse
Avatar
Sent From My Cyan Samurai

Nah, never heard of that band. Might check them out now. But I am a big Egyptology fan, hence the ankh. ;-)

drums4life said:
Nah, never heard of that band. Might check them out now. But I am a big Egyptology fan, hence the ankh. ;-)
Click to expand...
Click to collapse
Hmm okay looked similar but there a metalcore/jent type band idk how to genre them....
Sent From My Cyan Samurai

[2012/08/26] Unofficial AOKP JB for TF300t

This is an unofficial AOKP build for the tf300t.
Basically it is current AOKP with loganmc10s device files.
Thanks to termleech for helping me fix the boot.blob issue!
Changelog
2012/08/26
Updated to latest AOKP commits (2012/08/26)
Working toggles thanks to http://gerrit.sudoservers.com/#/c/2896/
2012/08/18
boot.blob is now flashed correctly, you don't need to install CM10 prior to this ROM anymore
Instructions
Download ROM
Download GAPPS
Wipe
Flash ROM
Flash GAPPS
...
Profit!
Device tree here: https://github.com/loganmc10
AOKP Source here: https://github.com/aokp
Known issues
Navbar cannot be customized (except icon transparency)
GPS not working

Nice, will try this out today!
Boot animation keeps looping. Do you have to be stock before flashing this?

Turbojugend said:
Nice, will try this out today!
Boot animation keeps looping. Do you have to be stock before flashing this?
Click to expand...
Click to collapse
Don't have to be much of anything besides rooted w/ custom recovery. It should operate fine unless there's something wrong with the boot.img

I was running Hydro, wouldn't boot, went back to stock, will flash recovery and try flashing again.
Edit - Don't know what else I can be doing wrong. I went back to stock, flashed TWRP 2.2.1.3 and wiped, installed this rom, and it stays on the boot animation. Any ideas?

Turbojugend said:
I was running Hydro, wouldn't boot, went back to stock, will flash recovery and try flashing again.
Edit - Don't know what else I can be doing wrong. I went back to stock, flashed TWRP 2.2.1.3 and wiped, installed this rom, and it stays on the boot animation. Any ideas?
Click to expand...
Click to collapse
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.

doesn´t boot with CWM here.
Stuck on the AOKP bootanimation

mikaole said:
doesn´t boot with CWM here.
Stuck on the AOKP bootanimation
Click to expand...
Click to collapse
Yeah I knew it wasn't me, every other ROM has worked fine.
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------
NYCHitman1 said:
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.
Click to expand...
Click to collapse
But that is irrelevant if you go back to stock.

It's fantastic, thanks man.

Thanks for this. I just dove in! Everything seems buttery. :thumbup:
Sent from my Transformer Pad TF300T using Tapatalk 2

Flashed from CM10 this time and it worked. Buttery smooth rom, good job!

even GPS works?

Im also intrested on knowing if the GPS works.
BTW thanks for the rom, alwyas appreciate the developement on this device.

fromanbr said:
even GPS works?
Click to expand...
Click to collapse
Negative... as the same with other JB roms for this pad.
Sent from my Transformer Pad TF300T using Tapatalk 2

The reason it works fine for those who already have jb is aokp still doesnt make the boot.blob correctly. So unless the OP switches it out with one built from a working build those not already on jb will not boot.
@karodee I'm gonna send you a DM later you can continue the AOKP builds. Ive got my own ROM I'll be releasing here soon so I'll give you ant help you want or need on the aokp stuff.
Sent from my Nexus 7 using Tapatalk 2

termleech said:
The reason it works fine for those who already have jb is aokp still doesnt make the boot.blob correctly. So unless the OP switches it out with one built from a working build those not already on jb will not boot.
@karodee I'm gonna send you a DM later you can continue the AOKP builds. Ive got my own ROM I'll be releasing here soon so I'll give you ant help you want or need on the aokp stuff.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Figured it had to be something like that, since I used your builds before without issue.

NYCHitman1 said:
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.
Click to expand...
Click to collapse
The boot restore was actually fixed two versions of TWRP ago. The most recent update also fixed external SD card support.

First off. Thanks I love AOKP. Is anyone else having notification toggle problems? I had preview two on before and they worked fine. I did a full wipe and flashed this and the toggles don't work at all. They don't even show up. Any ideas?
Sent from my Galaxy Nexus using xda app-developers app

wheelerr said:
First off. Thanks I love AOKP. Is anyone else having notification toggle problems? I had preview two on before and they worked fine. I did a full wipe and flashed this and the toggles don't work at all. They don't even show up. Any ideas?
Click to expand...
Click to collapse
Do you mean you can't customize the toggles displayd in the notification area? I think that is currently not implemented in AOKP, they just recently merged the battery icon for the tablet navbar. Or do you mean the toggles that are there by default do not work? I tried them and they work for me :-/ Could you give a logcat?
Regards

karoodee said:
Do you mean you can't customize the toggles displayd in the notification area? I think that is currently not implemented in AOKP, they just recently merged the battery icon for the tablet navbar. Or do you mean the toggles that are there by default do not work? I tried them and they work for me :-/ Could you give a logcat?
Regards
Click to expand...
Click to collapse
I do mean those toggles. They were in the previous preview. That's why Im confused. The OLD preview was working fine. This latest one doesnt work.
Oh well, we'll see what happens.

I like the boot animation, but this appears to be a port of cm10, not the aokp that is based on stock. What sucks is it doesn't have some of the cm features like battery percentage.

[Q] flashing 4.2 gapps???

i'm about to install the new 4.2 google apps on my gs3 running cm10 nightly from nov 2.
i'm gonna Go into CWM, Clear cache, Clear Dalvik Cache, Flash Zip file, Fix permissions
any reason i should be worried?

Beedo34 said:
i'm about to install the new 4.2 google apps on my gs3 running cm10 nightly from nov 2.
i'm gonna Go into CWM, Clear cache, Clear Dalvik Cache, Flash Zip file, Fix permissions
any reason i should be worried?
Click to expand...
Click to collapse
just curious can you post the download link here?

http://d-h.st/wBX

Beedo34 said:
http://d-h.st/wBX
Click to expand...
Click to collapse
Im honestly not sure.. it depends on your source like who gave it to you.. I heard a while ago that the 4.2 source is coming in like 8 days so dont kill your precious phone xD Task is probably gonna take care of that for us with a new AOKP based on 4.2

amzi said:
Im honestly not sure.. it depends on your source like who gave it to you.. I heard a while ago that the 4.2 source is coming in like 8 days so dont kill your precious phone xD Task is probably gonna take care of that for us with a new AOKP based on 4.2
Click to expand...
Click to collapse
i was directed there from droidlife.com
the article said custom roms should be good to go with this.
if it was released for the GNEX then leaked, does that mean all devices can flash it?

Beedo34 said:
i was directed there from droidlife.com
the article said custom roms should be good to go with this.
if it was released for the GNEX then leaked, does that mean all devices can flash it?
Click to expand...
Click to collapse
I mean it neer said not too.. you could try.. worst thing is your google play isnt gonna work but u could always fix that by restoring or flashing ur old gapps... If i were you i'd wait lol wouldn't risk it

Beedo34 said:
i was directed there from droidlife.com
the article said custom roms should be good to go with this.
if it was released for the GNEX then leaked, does that mean all devices can flash it?
Click to expand...
Click to collapse
Heres a link for you http://forum.xda-developers.com/showthread.php?t=1965290 all the 4.2 stuff that works for our galaxy s 3 thers a gapps 4.2 download link in that forum too

Worked just fine for me. I'm gonna have to delete the launcher it came with. The gapps were slow to start and the camera fc'd once. I'll try freezing the old gallery apk that came with cm10.
Gonna tinker with photosphere
Sent from my SAMSUNG-SGH-I747 using xda premium

[Q] 4.2.2 rom and 4.1.2 rom

hi...I'm new here...and just tried 2 roms, 4.2.2 http://forum.xda-developers.com/showthread.php?t=2196160 and 4.1.2 http://forum.xda-developers.com/showthread.php?t=2034647.....so i find problems with both of roms. first rom runs well. but when i try to run file transfer through bluetooth, it just stucks(unfinished). i hope second rom runs well but when i installed it, android keyboard unfortunately doesnt run at all....so, any help? i love those roms. but i can't completely use any of them. thanks in advance.

koboi.ngangkang said:
hi...I'm new here...and just tried 2 roms, 4.2.2 http://forum.xda-developers.com/showthread.php?t=2196160 and 4.1.2 http://forum.xda-developers.com/showthread.php?t=2034647.....so i find problems with both of roms. first rom runs well. but when i try to run file transfer through bluetooth, it just stucks(unfinished). i hope second rom runs well but when i installed it, android keyboard unfortunately doesnt run at all....so, any help? i love those roms. but i can't completely use any of them. thanks in advance.
Click to expand...
Click to collapse
When you tried 4.1.2 ROM, did you flash a correct gapps? If you are using 4.1.2 ROM, then flash this gappsgapps-jb-20121011-signed.zip. Don't forget to FIX PERMISSION.

okay....here's the background situation i'm having...
1. i'm using 4.2.2 rom as i mentioned above
2. i'm trying to revert to 4.1.2 using the rom i mentioned above.
3. steps i take to deal with it are....
a. wipe data,cache in recovery
b. flash the rom
c. flash the gapps (as stated in the 4.1.2 rom OP)
d. reboot
is there anything wrong?mistake or incomplete step maybe.....thanks for your help.

koboi.ngangkang said:
okay....here's the background situation i'm having...
1. i'm using 4.2.2 rom as i mentioned above
2. i'm trying to revert to 4.1.2 using the rom i mentioned above.
3. steps i take to deal with it are....
a. wipe data,cache in recovery
b. flash the rom
c. flash the gapps (as stated in the 4.1.2 rom OP)
d. reboot
is there anything wrong?mistake or incomplete step maybe.....thanks for your help.
Click to expand...
Click to collapse
If you are going to revert from previous ROM, wipe /system, wipe /data, wipe /cache. Flash ROM + GAPPS + Fix Permission. Confirm that keyboard is working now.

koboi.ngangkang said:
okay....here's the background situation i'm having...
1. i'm using 4.2.2 rom as i mentioned above
2. i'm trying to revert to 4.1.2 using the rom i mentioned above.
3. steps i take to deal with it are....
a. wipe data,cache in recovery
b. flash the rom
c. flash the gapps (as stated in the 4.1.2 rom OP)
d. reboot
is there anything wrong?mistake or incomplete step maybe.....thanks for your help.
Click to expand...
Click to collapse
fix permission
Sent from my GT-I8150 using Tapatalk 2

omegahanggara said:
If you are going to revert from previous ROM, wipe /system, wipe /data, wipe /cache. Flash ROM + GAPPS + Fix Permission. Confirm that keyboard is working now.
Click to expand...
Click to collapse
still wont work...

koboi.ngangkang said:
still wont work...
Click to expand...
Click to collapse
Can you post your gapps's sha1sum?

omegahanggara said:
Can you post your gapps's sha1sum?
Click to expand...
Click to collapse
?????? what is that to be exactly?

koboi.ngangkang said:
?????? what is that to be exactly?
Click to expand...
Click to collapse
To be simplified: What gapps are you using?
What version of GApps are you running? And what is the package name? Is it gapps-jb-20121011-signed.zip or gapps-jb-20130301-signed.zip?

Kreaz said:
To be simplified: What gapps are you using?
What version of GApps are you running? And what is the package name? Is it gapps-jb-20121011-signed.zip or gapps-jb-20130301-signed.zip?
Click to expand...
Click to collapse
oh....
slim 3.1.0 ancora-20130220-unofficial with slim_gapps_4.1.2
and slim ancora 4.2.2 build 3 unofficial 20130402-0141 with slim_gapps
both use kernel cm10.1hurtsky v.2.1 ram 376mb

koboi.ngangkang said:
okay....here's the background situation i'm having...
1. i'm using 4.2.2 rom as i mentioned above
2. i'm trying to revert to 4.1.2 using the rom i mentioned above.
3. steps i take to deal with it are....
a. wipe data,cache in recovery
b. flash the rom
c. flash the gapps (as stated in the 4.1.2 rom OP)
d. reboot
is there anything wrong?mistake or incomplete step maybe.....thanks for your help.
Click to expand...
Click to collapse
maybe u flash wrong gapps

blacksmith yogi said:
maybe u flash wrong gapps
Click to expand...
Click to collapse
well i'm using gapps they provide along with roms they provide. i'm assuming they are the right gapps for each rom.

did u wiped system as well?

knight_57 said:
did u wiped system as well?
Click to expand...
Click to collapse
yep....

not sure if this helps but i've encountered this prob before...i have to reboot system before i flash the gapps for it to work...don't forget to wipe Dalvik cache too

knight_57 said:
did u wiped system as well?
Click to expand...
Click to collapse
thanks. it works!! now everything goes just great. now i'm using this rom http://forum.xda-developers.com/showthread.php?t=2034647
but i am wondering is this kernel http://forum.xda-developers.com/showthread.php?t=2218100 will runs perfectly in my rom?

koboi.ngangkang said:
thanks. it works!! now everything goes just great. now i'm using this rom http://forum.xda-developers.com/showthread.php?t=2034647
but i am wondering is this kernel http://forum.xda-developers.com/showthread.php?t=2218100 will runs perfectly in my rom?
Click to expand...
Click to collapse
Your ROM based on Android 4.1.2 then kernel is for Android 4.2.2 means it won't work for you. BTW, you use Android 4.1.2, what GAPPS you are using?

omegahanggara said:
Your ROM based on Android 4.1.2 then kernel is for Android 4.2.2 means it won't work for you. BTW, you use Android 4.1.2, what GAPPS you are using?
Click to expand...
Click to collapse
oh.....see.....here's my gapps http://www.slimroms.net/index.php/downloads/all/viewcategory/159-addons-full-packages-4-1-2. it runs great actually. just looking for jelly bean 4.2.2 which runs perfect. i yet have found 4.2.2 rom with bluetooth issue....

patience bro~ it's still in its early development stage xD

knight_57 said:
patience bro~ it's still in its early development stage xD
Click to expand...
Click to collapse
well, after 4 or 5 times flashing 4.2.2 rom, slim bean, monster, etc, i'm pretty sure they still have bluetooth issue. just waiting for the right one. since i'm new, i was just supposing i got something wrong when i flashed rom. thanks for your helps bro. freshman needs it.

[ROM][4.4.2][OFFICIAL] CM11 Nightlies

I haven't seen a thread yet for this so I thought I'd post for those that need it.
http://goo.gl/79ztJ7
This is the link to the official site and download list for the Sprint Galaxy s3 only. I am not the developer nor have I compiled anything on this list. I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE. USE AT YOUR OWN RISK.
Also here are the recommended gapps...... UPDATED(I recommend full modular package)
http://forum.xda-developers.com/showthread.php?t=2397942
Installation instructions:
CLEAN FLASH:
-full wipe(necessary if new to cm 11 official nightlies)
-flash rom
- flash gapps
-flash a 4.4 compatible kernel(optional not necessary) I use BMS
-wipe dalvik and cache
- reboot and enjoy
DIRTY FLASH: (probably not recommended but I do it)
-wipe dalvik, cache, and system only
-flash rom
-flash gapps
-flash kernel if using a custom kernel
-wipe dalvik and cache again(not necessary but I always do to be safe)
*You may flash using the latest CWM or the latest TWRP recovery.
**ALWAYS MAKE A NANDROID BACKUP BEFORE YOU WIPE JUST IN CASE
The link is for all releases. Check daily. ENJOY:thumbup:
For those who prefer custom kernels, here is the recommended kernel:
http://forum.xda-developers.com/showthread.php?t=2134894
P.S. ART IS WORKING GREAT NO NEED TO FLASH SUPERSU... BUT AGAIN, FLASH AT YOUR OWN RISK
Sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

First! I was waiting for this release

AlkaliV2 said:
First! I was waiting for this release
Click to expand...
Click to collapse
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.

Cjen1987 said:
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.
Click to expand...
Click to collapse
I already install official nightly with twrp. And also camera works great. Your fixes ain't needed bruh
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

My first "First" post and someone has to take the wind out of my sails
I did see the other two releases for CM11 (SmasherX and the Unofficial) but I didn't know if CM was officially going to support our device. So I'm glad an official release is out and has the CM team and Bad.Fish behind it.
So thanks to both of you for getting CM11 into our hands so I can harass my phone by saying "OK Google"

Working great for me. Does LTE work? I cant test it here.

Has anyone gotten the built in wifi tether to work.. Bluetooth teether works but I error out when starting the wifi teether. Just wondering if this has been enabled yet in the nightlies.. Any help appreciated. I have searched the threads and no mention of it thanks

afail said:
Working great for me. Does LTE work? I cant test it here.
Click to expand...
Click to collapse
LTE works fine for me.

Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk

StuckinMemphis said:
Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Has anyone had any issues with Wi-Fi tether on 12-11 release? Dirty flashed but wanted to see if anyone might have clean flashed and experienced the same thing on this build before I start over...
Sent from my SPH-L710 using Tapatalk

Bad.Fish said:
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?

StuckinMemphis said:
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?
Click to expand...
Click to collapse
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Bad.Fish said:
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
I dirty flashed with cleaning just dalvik and so far it looks very good..

Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app

dubsides said:
Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Maybe you should clean flash with the recommended gapps above... I have no camera issues at all
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Any word on when 4.4.2 will be merged?

FatalIll said:
Any word on when 4.4.2 will be merged?
Click to expand...
Click to collapse
it's already been merged

SOHKis said:
it's already been merged
Click to expand...
Click to collapse
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10

FatalIll said:
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10
Click to expand...
Click to collapse
keep looking - https://plus.google.com/+CyanogenMod/posts/Q9Ekfg8RCTM