Develop Bugs

CM10 update build???

I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:

No need to wipe anything but cache/dalvik when upgrading versions of the same ROM

ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?

?
stank656 said:
ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?
Click to expand...
Click to collapse
W
Yes works when it wants to!!!

icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth :::update::: flashed yesterday to 4.4, also not wiping/clearing ANYTHING, and all is good =)

founderbrn said:
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth
Click to expand...
Click to collapse
I'm hearing a lot of happiness about this ROM. Running CM9 Alpha6. I guess I can go give it a try. Do you all still have Airplane Mode being locked, or LOS? Ima go check out the thread too.

icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
4.4 is out if you didn't know yet

oshinqwe said:
4.4 is out if you didn't know yet
Click to expand...
Click to collapse
4.4 did not really change a whole lot...except the boot animation. I get the Airplane mode bug constantly when not on wifi
Sent from my SPH-D710 using xda app-developers app

MIUI offical builds doesn't work :(

Hiiii guys! I have a problem with MIUI official rom, and maybe some kind guy could help me...
I tried to flash the rom the first time, with custom kernel, and result was a bootloop...
tried with stock kernel and the phone process stopped forever XD
tried the previous build and touchscreen is not working...
I don't know what can I do, these two last builds are pain in the ass...
someone had these problems?
I always wipe everything, flash boot, flash rom, language pack (maybe is the lang pack the problem?) flash gapps, reboot...

Ask such questions in the ROM thread :http://forum.xda-developers.com/showthread.php?t=1957490
After flashing MIUI with it's default kernel, you need to wipe everything and then format /system and then flash the ROM.zip...
com.process errors either means you didn't flash the boot.img correctly or you didn't wipe via recovery...

vin4yak said:
Ask such questions in the ROM thread :http://forum.xda-developers.com/showthread.php?t=1957490
Click to expand...
Click to collapse
Nop, because he can't, you must have posted 10 messages into the other board before posting into rom develeloppement section.

Busyb0x said:
Nop, because he can't, you must have posted 10 messages into the other board before posting into rom develeloppement section.
Click to expand...
Click to collapse
He has 365 posts :cyclops:

Yup yes you are right, hadn't seen

I'm asking here because there's no thread for official miui (the miuiandroid.com one), that one is rd-miui, I'm not flashing that one....
now I don't get errors about com.process, but touchscreen doesn't work...flashed 3 times, wiping everything...

throcker said:
I'm asking here because there's no thread for official miui (the miuiandroid.com one), that one is rd-miui, I'm not flashing that one....
now I don't get errors about com.process, but touchscreen doesn't work...flashed 3 times, wiping everything...
Click to expand...
Click to collapse
Yes, the touch won't work because of the different bases! AFAIK!
It's best you use RD-MIUI... Any roms which are not from XDA, I'm not sure anyone here will be able to help you.
All I can say is do the following:
Flash boot.img after that erase cache via fastboot. then flash this script via recovery: http://d-h.st/kG0 and then flash the rom.zip... This should work.

vin4yak said:
Yes, the touch won't work because of the different bases! AFAIK!
It's best you use RD-MIUI... Any roms which are not from XDA, I'm not sure anyone here will be able to help you.
All I can say is do the following:
Flash boot.img after that erase cache via fastboot. then flash this script via recovery: http://d-h.st/kG0 and then flash the rom.zip... This should work.
Click to expand...
Click to collapse
I wanted to try the official one, because it's up-to-date and because it's official (I think is more reliable, with respect for the RD one that is a good rom), and I still don't understand if RD-miui is v5...screenshots are miuiv4...
anyway, I'll wait for someone who had some experience with official builds...thanks
edit: ok, now...the problem is just one...touchscreen doesn't work!
I tried every single v5 official build! and I have always touchscreen not working....this is the only issue I have
very very strange

throcker said:
I wanted to try the official one, because it's up-to-date and because it's official (I think is more reliable, with respect for the RD one that is a good rom), and I still don't understand if RD-miui is v5...screenshots are miuiv4...
anyway, I'll wait for someone who had some experience with official builds...thanks
edit: ok, now...the problem is just one...touchscreen doesn't work!
I tried every single v5 official build! and I have always touchscreen not working....this is the only issue I have
very very strange
Click to expand...
Click to collapse
you know that RD-MIUI is based on official? it's just made perfectly compatible with the HOX ....so you should flash only roms which are really made for HOX and especially from xda ...try RD-MIUI ...it is based on v5 but not latest v5 ..it's like a pre-version...

One-X-master said:
you know that RD-MIUI is based on official? it's just made perfectly compatible with the HOX ....so you should flash only roms which are really made for HOX and especially from xda ...try RD-MIUI ...it is based on v5 but not latest v5 ..it's like a pre-version...
Click to expand...
Click to collapse
tried that, aaaand is based on v4...

throcker said:
tried that, aaaand is based on v4...
Click to expand...
Click to collapse
then wait or try sense roms...or build your own rom

[ROM][4.4.2][OFFICIAL] CM11 Nightlies

I haven't seen a thread yet for this so I thought I'd post for those that need it.
http://goo.gl/79ztJ7
This is the link to the official site and download list for the Sprint Galaxy s3 only. I am not the developer nor have I compiled anything on this list. I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE. USE AT YOUR OWN RISK.
Also here are the recommended gapps...... UPDATED(I recommend full modular package)
http://forum.xda-developers.com/showthread.php?t=2397942
Installation instructions:
CLEAN FLASH:
-full wipe(necessary if new to cm 11 official nightlies)
-flash rom
- flash gapps
-flash a 4.4 compatible kernel(optional not necessary) I use BMS
-wipe dalvik and cache
- reboot and enjoy
DIRTY FLASH: (probably not recommended but I do it)
-wipe dalvik, cache, and system only
-flash rom
-flash gapps
-flash kernel if using a custom kernel
-wipe dalvik and cache again(not necessary but I always do to be safe)
*You may flash using the latest CWM or the latest TWRP recovery.
**ALWAYS MAKE A NANDROID BACKUP BEFORE YOU WIPE JUST IN CASE
The link is for all releases. Check daily. ENJOY:thumbup:
For those who prefer custom kernels, here is the recommended kernel:
http://forum.xda-developers.com/showthread.php?t=2134894
P.S. ART IS WORKING GREAT NO NEED TO FLASH SUPERSU... BUT AGAIN, FLASH AT YOUR OWN RISK
Sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

First! I was waiting for this release

AlkaliV2 said:
First! I was waiting for this release
Click to expand...
Click to collapse
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.

Cjen1987 said:
It's been out.
Go here: http://d-h.st/users/Cjen1987/?fld_id=28992#files
I updated it with twrp installing and camera fix.
I add it to each build that comes out.
Click to expand...
Click to collapse
I already install official nightly with twrp. And also camera works great. Your fixes ain't needed bruh
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

My first "First" post and someone has to take the wind out of my sails
I did see the other two releases for CM11 (SmasherX and the Unofficial) but I didn't know if CM was officially going to support our device. So I'm glad an official release is out and has the CM team and Bad.Fish behind it.
So thanks to both of you for getting CM11 into our hands so I can harass my phone by saying "OK Google"

Working great for me. Does LTE work? I cant test it here.

Has anyone gotten the built in wifi tether to work.. Bluetooth teether works but I error out when starting the wifi teether. Just wondering if this has been enabled yet in the nightlies.. Any help appreciated. I have searched the threads and no mention of it thanks

afail said:
Working great for me. Does LTE work? I cant test it here.
Click to expand...
Click to collapse
LTE works fine for me.

Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk

StuckinMemphis said:
Running the CM-11 12-8 nightly with CM-KK Gapps, flashed with latest TWRP recovery. I think this might be running better than 4.3 ever ran. Everything is working well that I have experienced so far. Been running for 3 days. I am running Dalvik. Tried ART. Can't say that I noticed any speed improvement. I did get a single error popping up. It was something about Google text to speech. That was the only error I got running ART on my current setup. This is awesome. Wasn't sure if we would get to experience KitKat on thus device. Thanks.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Has anyone had any issues with Wi-Fi tether on 12-11 release? Dirty flashed but wanted to see if anyone might have clean flashed and experienced the same thing on this build before I start over...
Sent from my SPH-L710 using Tapatalk

Bad.Fish said:
Errors are from the gapps. Use the ones in OP link. Make sure its the 4.4.1. and not the 4.4.2 or you will also get errors
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?

StuckinMemphis said:
Thanks Bad Fish. Can I just reflash the ROM with the proper gapps clearing Dalvik and cache or do I have to do a complete wipe of everything?
Click to expand...
Click to collapse
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Bad.Fish said:
I would clean flash to be safe.
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch
Click to expand...
Click to collapse
I dirty flashed with cleaning just dalvik and so far it looks very good..

Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app

dubsides said:
Ugh, every time I flash it kills my rear camera until I load a tw ROM and literally pull the camera from my phone
I have jk camera version
[s5c73m3_get_sensor_fw_version : 2761] sensor_fw = ZKFI07
[s5c73m3_wait_ISP_status : 485] FAIL : ISP has been not prepared!! : 0x0x1
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Maybe you should clean flash with the recommended gapps above... I have no camera issues at all
sent from my Sprint Galaxy S3 running KitKat 4.4.1. Biyatch

Any word on when 4.4.2 will be merged?

FatalIll said:
Any word on when 4.4.2 will be merged?
Click to expand...
Click to collapse
it's already been merged

SOHKis said:
it's already been merged
Click to expand...
Click to collapse
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10

FatalIll said:
Are you sure? I dont see it here unless I'm retarded.
I'm still on 12/10
Click to expand...
Click to collapse
keep looking - https://plus.google.com/+CyanogenMod/posts/Q9Ekfg8RCTM

[Q] Last update [ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 [BUGFREE]

Hi, I would like to know if 2014-02-27 is the last CM10.2 update for Galaxy Ace 2 NFC
I've read it's bugfree and I'd like to install it because I already have the 2014-01-23 cm10.2 version. Do I have only to 'wipe cache' before install?
Thanks! Great job!!!

marmotilla83 said:
Hi, I would like to know if 2014-02-27 is the last CM10.2 update for Galaxy Ace 2 NFC
I've read it's bugfree and I'd like to install it because I already have the 2014-01-23 cm10.2 version. Do I have only to 'wipe cache' before install?
Thanks! Great job!!!
Click to expand...
Click to collapse
The last available update fot the NFC version is 2014-02-28.Yes it bugfree except from the Teamcanjica OTA app which crashes on startup and does not work in general.You can remove it with titanium backup.
Yes only a cache wipe will suffice to install the update.

marmotilla83 said:
Hi, I would like to know if 2014-02-27 is the last CM10.2 update for Galaxy Ace 2 NFC
I've read it's bugfree and I'd like to install it because I already have the 2014-01-23 cm10.2 version. Do I have only to 'wipe cache' before install?
Thanks! Great job!!!
Click to expand...
Click to collapse
Have you install the rom from a non-p version of another rom if yes please tell me how

ACE2_99 said:
Have you install the rom from a non-p version of another rom if yes please tell me how
Click to expand...
Click to collapse
Hi,
I've installed the p-version Teamcanjica because I didn't loose the NFC connection.

snatch_bill said:
The last available update fot the NFC version is 2014-02-28.Yes it bugfree except from the Teamcanjica OTA app which crashes on startup and does not work in general.You can remove it with titanium backup.
Yes only a cache wipe will suffice to install the update.
Click to expand...
Click to collapse
I've installed 2014-02-28 version, but now, GPS doesn't work

marmotilla83 said:
I've installed 2014-02-28 version, but now, GPS doesn't work
Click to expand...
Click to collapse
Gps works fine for me!I never had a problem!Which navigation software do you use?Try wiping it's data and cache through application settings.

sorry for hijacking the thread!
I am currently running CM11.0 rom from NewMaclaw. Do I have to fully wipe the device if I want to downgrade to this rom (Cyanogenmod 10.2 by teamcanjica)?
Thanks!

fredericve said:
sorry for hijacking the thread!
I am currently running CM11.0 rom from NewMaclaw. Do I have to fully wipe the device if I want to downgrade to this rom (Cyanogenmod 10.2 by teamcanjica)?
Thanks!
Click to expand...
Click to collapse
Yes. Full wipe is recommended. Otherwise you might end up having force closes i think.
Sent from my GT-I8160 using xda app-developers app

Last update has memory leak. Do you recommend any previous version?

How to

Hallo .
I want to ask something .my galaxy wonder now running CM 10.1 JB 4.2.2 i want to flash CM 9 ICS ROM .No problem if i flash it ? Im really scare if i lost my galaxy wonder..

TheShield4600 said:
Hallo .
I want to ask something .my galaxy wonder now running CM 10.1 JB 4.2.2 i want to flash CM 9 ICS ROM .No problem if i flash it ? Im really scare if i lost my galaxy wonder..
Click to expand...
Click to collapse
So, you just need to do a pristine which means, format system, data and cache. and install normally like you installed cm10. Using the respective gapps. In the first post, normally there is instructions that you can follow.

ilusi0n_ said:
So, you just need to do a pristine which means, format system, data and cache. and install normally like you installed cm10. Using the respective gapps. In the first post, normally there is instructions that you can follow.
Click to expand...
Click to collapse
Do i need to flash stock rom first ,then flash CM 9 ? Or just flash to CM 9 ? Help me im noob .

TheShield4600 said:
Do i need to flash stock rom first ,then flash CM 9 ? Or just flash to CM 9 ? Help me im noob .
Click to expand...
Click to collapse
just cm9

ilusi0n_ said:
just cm9
Click to expand...
Click to collapse
Thank you Thank you .