Whenever I try to flash CM10.1 RC2 or CM10 they flash correctly, but when I try to flash their corresponding Gapps, it fails to open them during the flashing and aborts, so I can't finish the flashing of CyanogenMod until they work. Any info on why this is happening or a solution to help me finish the process?
r0b458 said:
Whenever I try to flash CM10.1 RC2 or CM10 they flash correctly, but when I try to flash their corresponding Gapps, it fails to open them during the flashing and aborts, so I can't finish the flashing of CyanogenMod until they work. Any info on why this is happening or a solution to help me finish the process?
Click to expand...
Click to collapse
Dirty or clean flash? You're using wich recovery?
Wipe system/cache (factory reset)
install
jonmassot said:
Dirty or clean flash? You're using wich recovery?
Wipe system/cache (factory reset)
install
Click to expand...
Click to collapse
Im using cwm and i use darkside superwipe because it wipes more thoroughly and without the darkside superwipe after a factory reset and cache wipe it gets stuck in a boot loop
r0b458 said:
Im using cwm and i use darkside superwipe because it wipes more thoroughly and without the darkside superwipe after a factory reset and cache wipe it gets stuck in a boot loop
Click to expand...
Click to collapse
If I'm not wrong, Darkside superwipe ils not needed with some versions of cwm..
Try a different gapps package? Maybe a bad download.
Sent from my SAMSUNG-SGH-T989
I've tried re-downloading the Gapps packages multiple times, somebody told me to put the Gapps on the root of my SD Card, but I don't really know what that means. Maybe that would help. So could you tell me what that means and how to do that?
your root sd card is where you put the ROM/Kernels anything you was going to flash pretty much its like the C/ drive on computer ROOT means on the outside of all system files
krazierokz said:
your root sd card is where you put the ROM/Kernels anything you was going to flash pretty much its like the C/ drive on computer ROOT means on the outside of all system files
Click to expand...
Click to collapse
Don't know why people are still using CWM and continuously having issues - I'm going to recommend TWRP and say bye to trying to use extra cache wipes and such. If you can't flash it with TWRP, you probably have a bad download or SD error
+1 upgrade your recovery bro you are living in the past
Related
I tried a ROM update today (Magnolia) and my phone is now seriously slow (including SpeedTest which shows about 50Kbps download speed). I attempted to reinstall the same ROM and to restore a Nandroid (neither of which has helped). I did every wipe present in CWM v2.5.1.2 (I know v3.x.x.x is not a good wiper) and in HBOOT, also all to no avail.
It is possible that the ROM is focused on carefully updating itself rather than completely overwriting.
Does anyone have a recommendation as to the best way to really ensure that no old runaway processes are surviving the flashes (ROM or Nandroid)? I am wondering if flashing another ROM would do it (it wouldn't try to update), but am very open to suggestions.
Thanks!
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Dont use rom manager to install go into recovery. Do a factory reset twice, then goto mounts and storage and format manually, data, cache, system, boot. Do that twice or more and youre super wiped as you put it. But as far as magnolia goes...did you make sure that you dl'd the flashover and not the whole rom?
Sent from my ADR6300 using XDA App
Thanks
Pete - Thanks. I never use RomManager to do ANYTHING (and remain surprised that people do). I do factory reset and wipe in CWM but never formatted system; which I just posted in the Magnolia forum as being what I thought is causing all the trouble. At least this lets me know how to manually do it. Thanks
1107963 said:
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Click to expand...
Click to collapse
Building on this- I do EVERYTHING from recovery. In addition to the steps listed I also go to "mounts and storage" and wipe /system, /data, /cache, and /boot. Eradicate!
Sent from my ADR6300 using XDA Premium App
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
johnchad14 said:
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
Click to expand...
Click to collapse
Right? Super Charmin came to mind right away.
Sent from my ADR6300 using XDA App
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
Hey I am new to this so I had a T-989 running on 4.1.2 or something and so I installed CWM and rooted it using the T-989 toolkit. Afterwards I forgot to wipe and installed CM10. I was stuck on the booting screen for 40 mins and when I tried to go back to CWM it didnt work. So using the same toolkit I flashed the stock ROM. The stock seems to be gingerbread 2.3.6 and now the toolkit will not recognize it. Please help. I want it to run on CM10
Forget the toolkit and do it manually. First do you still have root? Try installing twrp recovery , you will have much less problems. Or try cwm again and make sure you follow the steps provided. Usually it's wipe/format, then format system, flash rom, wipe dalvick, wipe cache partition, fix permissions, reboot.
badaphooko01 said:
Forget the toolkit and do it manually. First do you still have root? Try installing twrp recovery , you will have much less problems. Or try cwm again and make sure you follow the steps provided. Usually it's wipe/format, then format system, flash rom, wipe dalvick, wipe cache partition, fix permissions, reboot.
Click to expand...
Click to collapse
Thanks for the info I was able to flash a 2.3.6 Gingerbread ROM onto my S2 using the toolkit and then from there on I had to reinstall the CWM and root and then using another guide I used the DarkSide wipe and reinstalled everything manually. Solved. Thank you.
Ok, so i was using the cyanogenmod nightlys just fine until i decided to want to try other roms (Pac-man, exodus, etc.) when i loaded the first i used clockwork recovery and it seemed to go smoothly and installed the Gapps, and BAM boot loop, i can still access the recovery menu and the Odin mode menus with the boot sequence, ive successfully side-loaded other roms and Gapps and nothing seems to work, everything just gives me the boot loop, Any help is much appreciated.
Edit: forgot to mention, sometimes it loads the rom but only for a few seconds and reboots again
Assume you did clean flash? Wiping data, cache, dalvik cache.
Also twrp recovery works a little better flashing lollipop roms.
madbat99 said:
Assume you did clean flash? Wiping data, cache, dalvik cache.
Also twrp recovery works a little better flashing lollipop roms.
Click to expand...
Click to collapse
yes, i did a clean flash, do you think it could be as simple as using twrp?
Could even be the gapps you're using. If you're using a very recent build of a rom, make sure you're using new gapps. Try open gapps.
It's also sometimes necessary to wipe internal storage.
madbat99 said:
Could even be the gapps you're using. If you're using a very recent build of a rom, make sure you're using new gapps. Try open gapps.
It's also sometimes necessary to wipe internal storage.
Click to expand...
Click to collapse
ive tried different versions of gapps but ill give open another shot, whats the best way to wipe the internal storage?
Shadow00f said:
ive tried different versions of gapps but ill give open another shot, whats the best way to wipe the internal storage?
Click to expand...
Click to collapse
In twrp. Wipe/advanced wipe/ internal storage. Make sure you have anything you need from internal backed up.
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
IronRoo said:
No, but most people would flash gapps 6 too, else you will miss a lot (must be done at the same time as the ROM the first time to set permissions)
Click to expand...
Click to collapse
What I ment is before flashing it....Afterwards/during of couse Ill flash gapps
riahc3 said:
Title basically says it all.
I have been able to install TWRP on a S4 Mini. Do I need anything else to flash CM13?
Click to expand...
Click to collapse
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
syednawaz said:
Copy CM13 rom and gapp in your sd card.
Backup your old firmware through twrp.
Do a factory Reset from Wipe.
And install CM13 and gapp respectively.
And enjoy ^_^
Click to expand...
Click to collapse
checked every file hash matches, did exactly as written, done all of above and it doesn't work
TWRP went on in less than 10 second does that sound normal ? and how do you know if its actually on there?
Nope. Installation take atleast 2 or 3 minutes.
and if its installed properly you would have seen different rom from the stock.
Here is what i use for s4 mini(i9192). Also used it on i9190 model as well.
http://forum.xda-developers.com/galaxy-s4-mini/development/rom-aokp-rom-25-apr-2016-t3366314
and these steps mentioned in the website.
A. Initial install
1. Copy ROM and Gapps to your external SD Card or internal memory
2. Boot into recovery
3. Wipe
4. Install ROM and Gapps
5. Reboot
Its simple. Should have worked.
I hope you have installed your model rom.
A question the system format is required to install the rom ??
juanpabloml said:
A question the system format is required to install the rom ??
Click to expand...
Click to collapse
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
syednawaz said:
In TWRP Swipe for factory reset will do the job. you can also do dalvik /art cache in advance wipe. System or other wipe never did it for changing roms.
Click to expand...
Click to collapse
Ie that enough only to make WIPE FACTORY RESET AND WIPE DALVIK CACHE is not necessary to the FORMAT SYSTEM, DATA AND CACHE ??
sorry i do not understand.
to install a rom just do a factory reset. nothing else is necessary.
If you do not do factory reset, sometimes you will not be able to install a new version of rom(for example, from kitkat to lollipop).
if you do not do factory reset its called dirty flash.
for example
you are using custom rom cm13. and it has a new update released, you go in twrp recovery and install the updated rom without doing factory reset. this way you can keep all the application and data you have.
i hope i am making some sense. it is hard for me to explain.
well do some flashing and you will understand but always make a backup.