Related
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
KNguyen104 said:
i had the same problem when i tried to update on the g2. i backed up the phone and wipe data and caches and flashed again the it worked you might have to do it acouple of times
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Using the RomManager interface I chose to Wipe Data and Cache and also chose the gapps package to install. I guess I could try it again but I was mystified why it didnt work since I "thought" it was so simple.
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
snowboarda42 said:
If you're coming from a sense rom, wipe cache, data, dalvik, system, boot, basically everything but the sd card. After that, flash cyanogenmod, then gapps, then start the phone.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Alpine- said:
I'm an android noob, you'll have to forgive me. I thought when I selected "wipe data and cache" prior to flashing CM7 in the RomManager interface that it meant it would wipe all of that.
So I need to manually wipe everything except the card? Also, a secondary question, will any of this jeopardize the ability to restore my currently backed up stock sense rom if **** hits the fan?
Click to expand...
Click to collapse
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Alpine- said:
So I have a rooted (latest unrevoked) EVO with stock ROM. Radio is the current version so I did not need to flash a new radio. I have the rom backed up with rom manager and also a Titanium Backup.
I download Cm7-final with Rom Manager and proceed to flash it. All appears well until it loads and I'm stuck in CM7 splash bootloop and never get into the actual OS/homescreen. I boot to recovery and restore my prior rom backup, luckily all is fine.
My question is what have i done wrong? I read the EVO CM7 Wiki and it looks like I followed the instructions correctly. Do I need to ditch using RomManager and try it manually? Any suggestions on why I got this bootloop?
Click to expand...
Click to collapse
I had the same issue....although mine have been caused by restoring system data.
What I did is manually DL the rom, boot into recover, wiped cache/dalvic, flashed from zip (Both CM7 and the proper GAPPS file) and it worked.
eventer289 said:
No it won't as long as you have a nandroid. Look up the "VR Superwipe," and flash it. I'd recommend booting into recovery manually and doing this. Wipe cache and dalvik after flashing the superwipe for good measure. Finally flash the ROM.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Alpine- said:
nandroid? So the RomManager rom backup I created isnt sufficient? I also have a full Titanium Backup saved too. Why Nandroid? I was under the impression this was just a similar app to Titanium - wrong?
Thanks for the input guys.
Click to expand...
Click to collapse
So wait, still getting the loops?
teh roxxorz said:
So wait, still getting the loops?
Click to expand...
Click to collapse
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.
What I started doing was booting into RECOVERY (i know it sounds scary but it really isn't) A little off topic but there is a great app that I think every rooted user should use, it's called: Reboot Control Widget It only costs a measly $1 in the Market but it's well worth it. Basically you put the widget on the desktop and click on it. You are then given the option to Reboot your phone, Hot Boot (fast reboot), boot into Recovery, Bootloader or Shut Down. Best dollar you will ever spend on an app.
So anyway, l strayed from my point. The problem you are experiencing is partially due to not having fully wiped your phones data/cache. I know you think you did it through the Clockwork app but from experience it doesn't work that well. There is a "flashable" file called Calkulin's Format All. It is in the DEV section posted in Calkulin's Rom section. It will clear everything except the contents of your SD card.
1. Boot into RECOVERY
2. find: INSTALL ZIP FROM SDCARD
3. select the Calkulin's Format ALL.zip file (your phone will be totally clean after this)
4. Again, choose INSTALL ZIP FROM SDCARD
5. Select the ROM you want to flash. (If it is a Cyanogen based ROM you will have to flash the appropriate Google Apps file after flashing the ROM. If flashing a Sense ROM the Gapps file is not necessary)
6. Flash Gapps file (Google apps if necessary)
7. Once this is done select REBOOT SYSTEM NOW
I feel confident that if you follow those steps you won't run into any bootloops!
I have added the Format All.zip file that I mentioned in my last post.
Little advice:
- take the time to do a Nandroid before flashing a new rom
- use Titanium to restore only the apps w/o the data. I know it's nice to restore everything the way you had it on the last rom but from my experience this has led to instability in the new rom. Also from my experience when you are on a SENSE rom and use Titanium to backup your files and data when you install a AOSP (like CM) rom and try to restore those files and data it won't even let you. Just something to keep in mind if you are switching between CM to Sense or vice versa.
Alpine- said:
I have no tried since I got all these suggestions. Sorry for the confusion. I suspect manually wiping and manually installing will work.
Click to expand...
Click to collapse
Yes it should.
Manually wipe you factory/data, cache, dalvik, then flash the rom with the latest gapps and you'll be good.
SantinoInc said:
Alpine:
When I first started flashing stuff I relied on the Clockwork app to do everything. I used it to flash roms and clear/wipe data and cache. However, after running into problems like yours I started doing it manually.....
Click to expand...
Click to collapse
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
when you use clockwordmod recovery to wipe your phone the dalvik doesn't wipe with the wipe option you see on the main screen, i belive you will see the option to wipe it in the advanced menu
Alpine- said:
Wow, great post. Very informative and detailed, thanks a lot.
So why is creating a nandroid backup better than the ROM backup function in RomManager? I restored that rom once and it worked flawlessly. How does nandroid differ from the rom backup created in RomManager?
Click to expand...
Click to collapse
They are the same. ROM Manager boots you into recovery and nandroids for you. People have mixed experiences with ROM Manager. From my experience it is best just to boot manually into recovery and take care of all your flashing and wiping there.
Sent from my PC36100 using Tapatalk
I rooted the incredible using unrevoked, no problem.
Installed and ran root apps, no problem, backed up everything using titanium backup and rom manager (nandroid) and so forth, installed cw recovery 3.0.0.8.
When I install the skyraider 4 rom from rom manager, it reboots and installs, but then when it reboots again it hangs at the white htc incredible screen (and I've let it wait as long as a half an hour). I have to take out the battery to be able to reboot it.
I can boot back to recovery and then re-install and boot back to the stock rooted rom just fine. But I can't get a new rom installed and working.
I've looked at previous threads about this problem:
http://forum.xda-developers.com/showthread.php?t=1038402
http://forum.xda-developers.com/showthread.php?t=1023358
http://forum.xda-developers.com/showthread.php?t=991953
http://forum.xda-developers.com/showthread.php?t=739646
http://forum.xda-developers.com/showthread.php?t=620621
and several other threads on other sites.
The only suggestions to come out of those, other that starting over from scratch (which I've done multiple times now), were to reformat the sd card, which I've also done, and to downgrade to cm recovery 2.5.1.2. Rom manager only shows versions as old as 3.0.0.5. I have put the PB31IMG.zip file on the sd card and loaded that before to help recover but I don't see how that helps with installing a new rom.
Any other suggestions? The main reason I even need a new rom is because bluetooth doesn't work in the stock rom (known issue: http://community.htc.com/na/htc-forums/android/f/91/p/2336/8570.aspx )
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
patsfan1130 said:
It sounds like you are not wiping cache and Davlik (in advanced). The constant reboot of the white screen is a classic symptom of not performing a cache and Davlik wipe
Click to expand...
Click to collapse
appreciate your help, yeah I've been doing that everytime in rom manager. I tried it several times manually in cm recovery, too, and still the white screen.
I'll just see if verizon can exchange it, or else I'll sell it for another phone with working bluetooth.
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
when im change roms im not use Rom manager,im just use rom manager for Backup Current Rom.I use quickboot for install a new Rom
1.open quickboot
2.choose recovery
3.wipe date/factory reset
4.drop down to yes delete all user data
5.go back to the first panel and choose advance(5 and 6 optional)
6.and then wipe Dalvik Cache
7.install zip from sd card.
8.good lock,(xdadevelopers and me are not responsable for any damage in your cell.)
Im running the skyrider 4.0 and is a wonderfull Rom,highly recommended.
k_nivesout said:
Might try reverting to the 2.5.1.2 recovery as I've heard the 3.x.x.x ones don't wipe consistently.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
.
There is a flash of CWM 2.5 that temporarily lets you use that to flash the rom then when you reboot it will revert back. Try that.
I have installed MildWild CM-2.7 on my Desire but there is now MildWild CM-2.8 and I can't find a guide how to install/update my Desire.
I have got S-OFF and recovery by Revolutionary The guide I followed to S-OFF and ROOT
This is the ROM I using. MildWild CM ROM
Just flash it via recovery like you did with the previous version
Will flashing the new version cause me to loose everything on my current version I.e apps and data etc??
Thanks for the reply though
do back up first, wipe davik+cache and flash it... it should work if not do full wipe and restore back up
just post any result we will move from there
What should I use to hackup TIbackup? Or is there a better one that you reccomend?
Wh000sher
Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk
rootSU said:
Titanium and recovery. All basic stuff. Have a,read of my rooting faq in my signature. Tells you everything you need to know
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Do I only restore the Titanium I am guessing, as restoring recovery would revert back to my current ROM? and I have thanks
Yes indeed. With titanium, only restore "missing apps with data".
Theres a guide Angusc wrote here:
http://forum.xda-developers.com/showthread.php?t=1480343
ROM Manager can make updating so much easier - well worth the investment.
JohnHarrisNZ said:
ROM Manager can make updating so much easier - well worth the investment.
Click to expand...
Click to collapse
I can't speak for other devices but for Desire, nope it's not worth the time and money.
kotag82 said:
do back up first, wipe davik+cache and flash it.
Click to expand...
Click to collapse
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?
Wh000sher said:
So I'm only wiping the davik cahce correct?
Not anything else or have I missed something?
Click to expand...
Click to collapse
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).
stankyou said:
Things I've learned with all this flashing that may be helpful for you.
1. Before flashing, always backup your current system up. nandbackup via recovery, titanium for your apps, sd card if really needed for that you need to do.
2. If flashing an updated version of same rom, wipe cache and dalvik only on your recovery (unless explicitly specified by dev to make a full wipe.)
3. If you are having weird issues after upgrading the same rom, do a full wipe and start fresh. If issue is not resolved, report the issue to the Dev's thread.
4. Do a Full Wipe on recovery (System/factory, cache, dalvik if coming from a different rom).
Click to expand...
Click to collapse
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher
Wh000sher said:
Thanks for the reply.
In response to 2. I am using ClockworkMod as my Recovery and I am guessing you mean I have to wipe 'cache partition' and 'wike dalvik cache' under advanced?
I am creating a guide to help fellow N00bs how to update a rom and change between ROM's
Wh000sher
Click to expand...
Click to collapse
Yes if I remember correctly there are the first three lines on that recovery is wipe system, cache partition (like you stated), and wipe dalvik. So if upgrading just wipe cache partition and dalvik cache.
System partition is where the "Android OS" resides. Wiping it is like formatting your computer. Most of the time, incremental updates of the same rom requires you to wipe just the cache partition and dalvik, otherwise if the rom update has a lot of changes, the dev might require you to wipe all three options on the recovery.
Having wiped my cache and dalvik cache. I am now wanting to install the new version. On the main screen I have 2 options which are tempting to click.
One is 'Apply update from SD card' and the other is 'Install zip from SD card'
I am unsure of which to choose but my gut instinct is to go with 'Install zip from SD card', is this correct or am i going to make a terrible mistake?
wh000sher
Install zip from SD
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
I have a rooted HTC Evo 4G. It is rooted with revolutionary and the s-off. I didn't root my device. I was playing with trying to install busybox from the busy box installer. It failed. But now that I have rebooted the phone(swapped a new battery on). It is stuck on the HTC EVO 4G white screen. I can get to the hboot screen and can get into recovery for Revolutionary CWM v4.0.1.4. I have tried some stuff. I'm here so it's safe to assume nothing worked. I have wiped the cache partition, I have tried the Fix Permissions option, Wiped Dalvik cache, wipe data/factory reset. I am knowledgeable with computers. Just not sure about this issue or which direct to go.
What can I do to get the phone back operational? Is there an image i can put on the sdcard and flash this thing with? I think I can manage that.
I'm so late in the rooting game here, there is so much information, not sure what I'm looking at. So I thought I would just go ahead and ask the questions. Maybe I won't get beat up too much and get pointed in the right direction.
I'm sure someone here can help you. A detail that you may have left out in your explanation is: what ROM you expect the phone to boot into.
Sounds like you just need to re-flash a ROM while you are in recovery.
Plenty of ROMs around here to choose from. I might recommend a very simple "stock" ROM for starters.
Later on, consider using a different recovery going forward. Evos historically have had issues with CWM. Try Amon Ra or SmelkusMOD...
Sent from my PC36100 using xda app-developers app
Yup, I would recommend Smelkus after you fix this
Go into recovery and make a full backup first (this way you can advance restore data later)
Then, as suggested above, grab a stock rom and flash it through recovery (making sure to wipe EVERYTHING)
Last, try to boot up your phone. It should work
Once it does, restore any data if you need to...if not, flash SmelkusMod recovery and then flash your rom of choice
Sent from my PG06100
I have the revolutionary recovery. Do I need to replace that with the smelkus mod?
a94cobra said:
I have the revolutionary recovery. Do I need to replace that with the smelkus mod?
Click to expand...
Click to collapse
You have the revolutionary BOOTLOADER. There is no "revolutionary recovery"
Sent from my PG06100
If you've wiped cache, dalvik cache, and factory reset your phone then you have no ROM to boot into. Flash a rom and you'll be good to go
kendallc123 said:
If you've wiped cache, dalvik cache, and factory reset your phone then you have no ROM to boot into. Flash a rom and you'll be good to go
Click to expand...
Click to collapse
Thats incorrect....the rom isn't stored on the data partition, which is what a factory reset wipes
ROMs are loaded from the /system partiton
Sent from my PG06100
CNexus said:
Thats incorrect....the rom isn't stored on the data partition, which is what a factory reset wipes
ROMs are loaded from the /system partiton
Sent from my PG06100
Click to expand...
Click to collapse
I was assuming he had formatted everything, including the system. If you didn't, my bad. Sorry