Related
Hello,
where can I get the WinMob6 ROM Udate for the HTC TyTN? The HTC Support told me that there is no update available...but there was an V6 Update...
German version (if there are differences) would be great!
Greetings
B
erdenkind said:
Hello,
where can I get the WinMob6 ROM Udate for the HTC TyTN? The HTC Support told me that there is no update available...but there was an V6 Update...
German version (if there are differences) would be great!
Greetings
B
Click to expand...
Click to collapse
All the official WM6 builds are here
Edit: if you want a unofficial 6.1 cooked build, HardSPL your phone then chose a rom to flash from the many that are here, they are far better than the old WM6 buils.
Thanks.
But could yu please help me:
Please give me one good working ROM with 6.1....link and filename! There are so many files mentiones verywhere that a beginne rlike me has got some problems recognizing the rigth files;-) I don't want to loose my working HTC
Are those ROMs also german versions?????
erdenkind said:
Thanks.
But could yu please help me:
Please give me one good working ROM with 6.1....link and filename! There are so many files mentiones verywhere that a beginne rlike me has got some problems recognizing the rigth files;-) I don't want to loose my working HTC
Are those ROMs also german versions?????
Click to expand...
Click to collapse
1) download hardspl from here and flash it
2) reflash the radio of your choice
3) flash a rom
About the roms, if you want english, and want Manilla 2d, I would flash one of Joshes roms from here
There isnt many german roms.
Starbase's german M2D here
If you want an english plain rom, I would suggest CRCs here
But there are many others I haven't trired, so the best is to look around and flash.
IF YOU WANT TO KEEP A ROM FOR A LONG TIME AND AVOID STABILITY ISSUES, PLEASES FLASH A OEM ROM BETWEEN COOKED ROMS
Usethis or any oem rom
Hi!
What means "reflash the radio of your choice?????" ...stupid german can't understand the meaning of radio....
erdenkind said:
Hi!
What means "reflash the radio of your choice?????" ...stupid german can't understand the meaning of radio....
Click to expand...
Click to collapse
If you HardSPL it overwites your radio rom, in order to unlock it ect.
A radio rom, is the bit that controlls all the phone functions, the signal you get, and the type of connection you get (gprs/3dge/3g/H) newer isn't always better but you will want a 1.4+ radio in order to get 3G reception.
List of Radio roms.
Beware, flashing your radio can be fatal, so make sure you have enough battery, and dont disconnect your phone while your doing it.
To be safe I would recomend you do it this way
@veyka:
I'll try to help and switch to german ;oD
@erdenkind:
Hallo erdenkind und willkommen beim Flashen. Sei gewarnt, dass Du das ganze auf eigene Gefahr machst. Du kannst den Hermes durchaus "zerschiessen"!
Nun zu Deinen Fragen:
Ein Gerät hat immer ein Firmware und ein Radio Rom. Du kannst i.d.R. beide unabhängig voneinander flashen.
Bevor Du ein "gekochtes" Rom flashst, musst Du ein HARD-SPL durchführen. Ich würde Dir dies hier empfehlen - http://forum.xda-developers.com/showthread.php?t=340468
Mit der 2.60 hat bei mir alles funktioniert, bei der 2.10er hat's geklemmt.
Als Rom benutze ich zur Zeit dies - http://forum.xda-developers.com/showthread.php?t=458456 und zwar die "All Back". Laeuft sehr zuverlaessig, ist aber englisch.
Beim flshen laeuft er bei mir immer bei 100% gegen den Poller. Das Utility meldet einen Kommunikationsfehler und auf dem Hermes bleibt alles bei 100% stehen. Keine Angst, Batterie raus, wieder rein, starten und los geht es (der erste Start dauert etwas, nicht nochmal neu flashen) mit dem Kalibrieren. Sollte mal was schiefgehen, findest Du hier immer Hilfe, meistens jedoch auf englisch. Deutsche Roms für den Hermes kann man uebrigens an einer Hand abzaehlen...
Ich hoffe, dass ich Dir ein wenig weiterhelfen konnte. Viel Spass beim Ausprobieren...
...Eins habe ich noch vergessen. Zum Flashen solltest Du den Hermes auf mindestens 50% Batterieladung haben, 90% ist besser. flashen ist uebrigens auch ueber eine Sd-Karte moeglich. Eine Anleitung dazu gibt es im WIKI
goy2k said:
@veyka:
I'll try to help and switch to german ;oD
Click to expand...
Click to collapse
Thank you, I was going to try machine translation but it would probs have made it worse
...I know about this. It's always a lot to laugh when we get "automatic" transtations. But german is an awful language (for germans too ;oD). By the way, I haven't done a translation of your hints. I tried to describe it in my own words and out of my experiance.
By this way I'd like to thank again all user of this forum for their patience with us, beeing newbies...
goy2k said:
...I know about this. It's always a lot to laugh when we get "automatic" transtations. But german is an awful language (for germans too ;oD). By the way, I haven't done a translation of your hints. I tried to describe it in my own words and out of my experiance.
By this way I'd like to thank again all user of this forum for their patience with us, beeing newbies...
Click to expand...
Click to collapse
If you have the time, it might be useful if you wrote a formal howto flash your phone guide, in German, which I can tag onto the end of the FAQ, it might help some people.
Just drop me a PM if you are interested
As for the patience, you caught me on a good day
Hallo goy2k,
danke für die schnelle Hilfe
Nun hab ich noch ein ActiveSync Thema: HTC meldet version 4.5 oder neuer benutzen...pc meldet "allgemeiner fehler"....MIST! Hab schon Dei-Neuinstalliert, Gebootet, HTC zurück gesetzt...keine Chance:-( ActiveSync Ordner auch schon gelöscht usw...
graz
erdenkind
@veyka:
I'll try to do it. Will give a feedback after weekend, because my wife and me are out of town...
@erdenkind:
Probleme mit activesync gibt es manchmal. Schuld daran ist zuweilen die Einstellung unter Start - Einstellungen - Verbindungen - USB to PC. Dort den Haken bei "Erweiterte Netzwerkfunktionen" entfernen. Falls das nicht hilft, melde Dich nochmal. Über das Wochenende bin ich nicht zu hause, eine Antwort kann dann etwas dauern...
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
erdenkind said:
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
Click to expand...
Click to collapse
Make sure you have your operators OEM rom downloaded and saved. There isn't a good noob way to just save your rom from your phone (that I know of), so reflashing is the way to go.
You can use something like pim backup to save your contacts and such.
erdenkind said:
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
Click to expand...
Click to collapse
You can dump the rom but as far as I know it doesn't produce a flashable file off the bat, but all the OEM roms are on the wiki
veyka said:
You can dump the rom but as far as I know it doesn't produce a flashable file off the bat, but all the OEM roms are on the wiki
Click to expand...
Click to collapse
yea if you were to dump the rom using a tool called "grab it" you would then need to spend time decrypting the dump and then have knowlege of how to use a rom kitchen into rebuilding it back into a somewhat usable rom image.
joshkoss said:
yea if you were to dump the rom using a tool called "grab it" you would then need to spend time decrypting the dump and then have knowlege of how to use a rom kitchen into rebuilding it back into a somewhat usable rom image.
Click to expand...
Click to collapse
That was pretty much what I was thinkin, shame there isnt a easier way.
Hello Diamond Fans,
i have build ROM's for the Trinity in the past and right now i thought it was time to share my new German ROM for the Diamond and i hope you will like it. It is not too heavy so it is only a basic Titanium version.
Full Version (14/06/10)
-Fixed eT9 On/Off problem
-changed Bluetooth reg
Add
-Facebook
-Footprint(modded for TomTom Navigation)
-GoogleMaps 4.1
-HTC Album 3
-Pre installed Marktplatz 1.2
-ConnectionSetup 3.1
-YouTube 2.6
-and changed some regs
http://rapidshare.com/files/398940786/Lalle-23547-05-Full.rar
Updated Version (25/05/10)
-Fixed WM65 Lockscreen (thx-veisen)
-Battery Drain Fix
-Youtube 2.5 maybe Fixes a little the lags
-Audiobooster
-and more....
http://rapidshare.com/files/391115055/Lalle-23547-04-GER-NewLS.rar
Fixed Version (19/04/10):
Bug correction: Updated et9 Version from 1.5 to 2.0
http://rapidshare.com/files/377782165/Lalle-23547-03-GER.rar
New Version with extra(13/04/10):
QuickGps
Youtube
StreamingMedia
HtcGps-App
USB-Plug-Popup
http://rapidshare.com/files/375471038/Lalle-23547-02-GER.rar
Details (31/03/10):
XIP/SYS - 23547/23547.5.5.0
Free RAM - 58MB/124MB
Titanium
2G Ogi-Dialer
New Office+Email
Adobe PDF 2.5.1.0.404840.03
RSSHub 2.1.1.1071
Teeter
Arcsoft MMS 5.2.0.47
BT_SAP
BT_FTP
CMInternetSharing 1.1.5.1
EZInput 1.5
and more...
http://rapidshare.com/files/370400392/Lalle-23547-01-GER.rar
Have fun Lalle!!!
P.S.
many thanks to ervius for his kitchen and all other guys here in the forum for sharing all the new good stuff for the HTC phones.
great!
a new german rom-cooker!!!!!
will you also release a rom with sense?
Dunnera said:
great!
a new german rom-cooker!!!!!
will you also release a rom with sense?
Click to expand...
Click to collapse
Sorry Dunnera not at the moment.
Lalle said:
Sorry Dunnera not at the moment.
Click to expand...
Click to collapse
ok no problem
but maybe you can share your kitchen?
Kann man dieses Rom für den produktiven Einsatz nutzen und es funktioniert alles, oder ist es nur eine Bastelei um zu sehen wie WM 6.5 läuft?
Ich schreibe mal in Deutsch weil es sich hier um ein Deutsches Rom handelt und hier mehr Unterwegs sind die auch Deutsch können.
Also ich hab das ROM File installiert und bin ganz zufrieden damit. Einziges problem ist derzeit das ich nichts finde um QuickGPS nachzuinstallieren. Hab zwar IGO 8 zum laufen bekommen, aber die Navi hat ca. 30 Minuten gebraucht bis brauchbare GPS Siganle gefunden hat.
Hat einer ne Idee wo ich ein funktionierendes QuickGPS for Windows Mobile 6.5 bekomme? Alles was ich bis dato installiert habe, hat entweder gesagt falsches Sicherheitszertifikat oder "Failed to create empty document".
Kajada said:
Kann man dieses Rom für den produktiven Einsatz nutzen und es funktioniert alles, oder ist es nur eine Bastelei um zu sehen wie WM 6.5 läuft?
Ich schreibe mal in Deutsch weil es sich hier um ein Deutsches Rom handelt und hier mehr Unterwegs sind die auch Deutsch können.
Click to expand...
Click to collapse
Yes its for daily use, I have test it for a view weeks before and its for me a requirement to create a ROM for daily use!!!
Sorry for the problem with the QuickGps function, I have seen that issue before in my test phase but I do not have that long fix time as described.
Lalle!
Hi Lalle,
first of all thx for your ROM. Regarding the QuickGPS... means that you cannot fix it in general? So how to you use the GPS function today on your device? Is there any alternative software to speed up the sattelite finding?
rgds
Moonshinemister
What about the weather in titanium? I cant find it like on your screenshot..
Hi,
thx for your ROM, looks good. I will try it as soon as QuickGPS works. Without QuickGPS my Diamond is taking too much time to find satellites.
Do you working on a bugfix?
Thanks a lot!
taurus
Halle, ich aus China , und ich bin ein Deutsch lerner. Koennen Sie mir helfen? Hier ist meine email adress:[email protected]
Got this ROM installed on a Diamond I just inherited. Runs fine and stable. I like it. Thanks Lalle.
mista.duke said:
What about the weather in titanium? I cant find it like on your screenshot..
Click to expand...
Click to collapse
Hi mista.duke,
you have to use the free "Home Customization" from MS Marketplace, you can add a new Panel called Weather and its for free.
Also a good app is the "Lock Device" App for automatic lock function.
Lalle
I recognized this morning that my Diamond had a much lower transfer rate on WLAN than my Artemis for he same download. As I assume that the WLAN drivers are included in the ROM do you think it could be caused by the drivers or is the diamond known for a bad WLAN module?
taurusfx said:
Hi,
thx for your ROM, looks good. I will try it as soon as QuickGPS works. Without QuickGPS my Diamond is taking too much time to find satellites.
Do you working on a bugfix?
Thanks a lot!
taurus
Click to expand...
Click to collapse
http://www.danielsteiner.net/quickgps.cab
you can find some other stuff at my small fix / patches repository @
http://www.danielsteiner.net/winmobile/Devices/HTC TD1
for touch diamond stuff
Regarding the WLAN issue I found that the setting was set to battery friendly (by default ) instead of the medium position. I will try if this improves things.
On issue with the ROM:
When I plug in the USB cable it's not asking for Active Sync or USB direct connection as it should. I have to pull up the menu manually and change it.
Froggerboy said:
Regarding the WLAN issue I found that the setting was set to battery friendly (by default ) instead of the medium position. I will try if this improves things.
On issue with the ROM:
When I plug in the USB cable it's not asking for Active Sync or USB direct connection as it should. I have to pull up the menu manually and change it.
Click to expand...
Click to collapse
Hi Froggerboy,
the thing with the USB cable function is okay so far because I have not include the popup in the ROM.
For the Quick GPS function I do not have the problems of getting 3D fix and with other ROMs before I got not that benefit as it should be... so it was not neccessary for me but I am loocking into it.
Lalle
Finally another German ROM!
Thanks a lot. I will try it. Have been waiting for a long time for a German ROM.
The WLAN issue did not really change but a search indicated that this is a known problem with the diamond. Though I haven't found the reason nor a solution for the problem.
What is your reason to disable the popup?
I thought the diamond has A-GPS. Ain't that good enough? Quick GPS isn't working on my diamond but TOMTOM and Smartrunner get a fix rather quickly.
Froggerboy said:
The WLAN issue did not really change but a search indicated that this is a known problem with the diamond. Though I haven't found the reason nor a solution for the problem.
What is your reason to disable the popup?
I thought the diamond has A-GPS. Ain't that good enough? Quick GPS isn't working on my diamond but TOMTOM and Smartrunner get a fix rather quickly.
Click to expand...
Click to collapse
Did you try MTTY before flashing? If you got a problem, that the cook doesn't have it might come from too many different flashes.
Give it a try.
Last week I gave my iPad to my friend and went for my first Android experience. XOOM. I bought it from Axiom in Dubai. It was “International Retail” version.( H.6.1-38-9) . Stock 3.0.1
As I said, I had no experience in Android but XOOM lack of functionality and problems forced me to go for upgrading it.
I started my search about “What is ROOTing?”, “Idiot guide” , “ROOT for dummies” … but after a week of study and “try and error” , I have a XOOM with :
OS : HC 3.1
ROM : Tiamat 1.1 /1.4.5 (Newest version)
Recovery : Clockwork 3.2.0.0 (Newest version)
Radio : GSM Based 3G/Edge is working (with different SIM card)
SD : SD card fully functional
WiFi : NO problem at ALL ! no disconnection, no of any kind.
Here I want to share my knowledge with you, Thanks to XDA-Developer forum and its users.
Warning: Read your Motorola warranty card and if you decide to lose their support then do the Rooting/upgrading at your own risk. This is only for educational purposes.
Let's Start
1. Install SDK on your PC . Really easy.
-Put SDK path in your PC’s path . This is necessary for you if you want to use ADB commends anywhere in your PC: C:\Program Files (x86)\Android\android-sdk\;C:\Program Files (x86)\Android\android-sdk\tools\;C:\Program Files (x86)\Android\android-sdk\platform-tools\;C:\Program Files (x86)\Java\jre6\bin\;C:\Program Files\Java\jdk1.6.0_26\bin\;C:\Program Files\Java\jre6\bin\
-See this as well : http://www.xda-developers.com/android/adb-easy-tutorial/
2. Get to know ADB / Fastboot command . with these:
- http://forum.xda-developers.com/showthread.php?t=502010
- http://forum.xda-developers.com/showthread.php?t=517874
- http://www.xoomforums.com/forum/motorola-xoom-hacking-guides/6795-basic-commands-newcomers-adb.html
3. Ok . Now you are ready for going for ROOT your device . by ROOT, you can have FULL access to your device file system.
-Read this : http://forum.xda-developers.com/showthread.php?t=1049901 Very good help. Skip the last part about installing modules because you are going to install new one later.
After ROOT, there is an application named SUPERUSER on your XOOM. Just run it, if you see no errors, then you did your job correctly.
4. Ok. Now you should install RECOVERY . This is necessary for other steps. With it, you can install ROM and also get backup and use it in case of emergency!
-Read This : http://forum.xda-developers.com/showthread.php?t=1130996 (JUST go to step 4)
-Read and use this Recovery Image: http://forum.xda-developers.com/showthread.php?t=1074979 (Use Method2)
- Test if you can go to Recovery screen . Go through menus.
- Make your SD card ready . 2GB is enough. Format it with your windows and in FAT32.
- Put it inside your XOOM , Go to Recovery , and get your first backup . Thn your are ready for next step
5. Ok . In this step we are going to install 3.1 on your XOOM !.
- Read this: http://forum.xda-developers.com/showthread.php?t=1089695
- The whole things is : Get some file from your XOOM – Keep them somewhere – Install regular 3.1 US version(http://forum.xda-developers.com/showthread.php?t=1074609-In this STEP 4 is VERY important to do) – Push back your own files to the device. That’s it.
EDIT : (12 - JULY - 2011) - U can now install AU version instead of US version . Much easier and safer : http://forum.xda-developers.com/showthread.php?t=1089695
- In every step you can get backup in your Recovery as well
6. Last Step . Install the latest Tiamat ROM .
- Read this: http://forum.xda-developers.com/showthread.php?t=1146153
Enjoy your XOOM .
RedSat!
Does it support the Korea Version which is WCDMA+WIFI？TKS
Dude, appreciate your work.... but why can't you be more specific in installation in your own language, without providing the links.........
Sent from my MZ601 using XDA App
redsat said:
this STEP 4 is VERY important to do) – Push back your own files to the device. That’s it.
- In every step you can get backup in your Recovery as well
!
Click to expand...
Click to collapse
hey, can u be more specific on this step......
which file to push back to xoom ?
EDIT: heheheh : i'm the first to "THANK" you... !!!
Big Thanks! But i'd like you also to be more specific on the files to push back. it's the telephone.db after all i had read before..my sd-card will arrive today and i'm keen on flashing right after getting home
And the only point i _allways_ don't get, is about pushing back your own files.
How to bakup them and how to restore.
can't find them in titanium or CWM
thx anyway!
Edit: damn it hast to be _in_ data.img from cwm backup but how to get it out?
triksgold said:
Does it support the Korea Version which is WCDMA+WIFI？TKS
Click to expand...
Click to collapse
It seems u have CDMA version not a GSM. Then U should be able to use US version. Study first.
Dave-Kay said:
Big Thanks! But i'd like you also to be more specific on the files to push back. it's the telephone.db after all i had read before..my sd-card will arrive today and i'm keen on flashing right after getting home
And the only point i _allways_ don't get, is about pushing back your own files.
How to bakup them and how to restore.
can't find them in titanium or CWM
thx anyway!
Edit: damn it hast to be _in_ data.img from cwm backup but how to get it out?
Click to expand...
Click to collapse
You have to pull those files after Root and before update to 3.1with ADB commands. The most important one is build.pro. If u have ur backups, restore ur phone to that stage, pull out the files and update again.
Attached u can find necessary files. These are for "International Retail Version". I've tested with 4 different SIM cards .
redsat said:
You have to pull those files after Root and before update to 3.1with ADB commands. The most important one is build.pro. If u have ur backups, restore ur phone to that stage, pull out the files and update again.
Click to expand...
Click to collapse
So from "adb push settings.db /data/data/com.android.providers.settings/databases/settings.db"
i make "adb pull settings.db /data/data/com.android.providers.settings/databases/settings.db" before?
My Device has only root and CWM till now. nothing bad happened. I'd like to be sure _before_ flashing new image
Dave-Kay said:
So from "adb push settings.db /data/data/com.android.providers.settings/databases/settings.db"
i make "adb pull settings.db /data/data/com.android.providers.settings/databases/settings.db" before?
My Device has only root and CWM till now. nothing bad happened. I'd like to be sure _before_ flashing new image
Click to expand...
Click to collapse
See the last post. I sent files for you . Pull all those or use mine.
Be brave and go for it
fairyshacker said:
hey, can u be more specific on this step......
which file to push back to xoom ?
EDIT: heheheh : i'm the first to "THANK" you... !!!
Click to expand...
Click to collapse
Read posts carefully then I'm sure u can do it . See post 7. I attached needed files there.
hmpf
http://forum.xda-developers.com/showthread.php?t=1074609
the file in Step4, which you said we have to do also, is missing
404
Edit: found it elsewhere (if it's the right one...) http://www.android.net/forum/downloads.php?do=file&id=49
Dave-Kay said:
http://forum.xda-developers.com/showthread.php?t=1074609
the file in Step4, which you said we have to do also, is missing
404
Edit: found it elsewhere (if it's the right one...) http://www.android.net/forum/downloads.php?do=file&id=49
Click to expand...
Click to collapse
U really is going for it . Ok . I cheked and u were right . Here is file which I used
redsat said:
U really is going for it . Ok . I cheked and u were right . Here is file which I used
Click to expand...
Click to collapse
Sure am i!
What do you think?
OK, one last question, then i am ready for takeoff.
It's about build.prop should the one i pulled work? should i take frankenheim, or what else to do with that?
Edit: g2g now. will do flash at 11pm or something like it
Your Help is much appreciated! THX!
Dave-Kay said:
Sure am i!
What do you think?
OK, one last question, then i am ready for takeoff.
It's about build.prop should the one i pulled work? should i take frankenheim, or what else to do with that?
Edit: g2g now. will do flash at 11pm or something like it
Your Help is much appreciated! THX!
Click to expand...
Click to collapse
I myself used build.frankenheim
I'm keeping my fingers crossed for u.
done till Step5, everything is fine. Downloading Tiamat now
redsat said:
It seems u have CDMA version not a GSM. Then U should be able to use US version. Study first.
Click to expand...
Click to collapse
I‘m using MZ601.It's really support the WCDMA/2100MHz without the CDMA.
Dave-Kay said:
done till Step5, everything is fine. Downloading Tiamat now
Click to expand...
Click to collapse
As your are German, too: How does your new ROM perform on the Xoom?
Also got the MZ601. Can you please share your experiences with it on Tiamat? Worth doing? Benefits?
Thanks
basthet said:
As your are German, too: How does your new ROM perform on the Xoom?
Also got the MZ601. Can you please share your experiences with it on Tiamat? Worth doing? Benefits?
Thanks
Click to expand...
Click to collapse
ja, Deutscher.
Habe Tiamat installiert und bin recht zufrieden. Der Vorteil mit Tiamat ist nicht so groß wie mit Android Revolution auf dem Desire HD aber es ist ein guter Anfang und letztlich werden das vermutlich auch die Entwickler so betrachten. Mir ging es zunächst um Root und eben darum Chef des Gerätes zu sein. Ich wollte auf Titanium und ein paar andere Gimmicks nicht verzichten, die ich von ARHD gewohnt bin. Aber am Ende rootet man ja sein Gerät nicht nur zum Selbstzweck Also neues ROM und los.
Tiamat ist stabil und flüssig und kann eben auch mit der eigens für das XOOM bestellten SD-Karte umgehen.
Ob sich das für dich lohnt, kann ich nicht sagen, für mich ist klar, ein sehr guter Anfang ist gemacht, das Gerät ist offen, Backup funktioniet, jetzt fehlt nur noch ein Stück weit die lebendige Developer-Comunity
Die Prozedur sieht btw. a Ende deutlich komplizierter aus, als sie ist.
Im gegensatz zum Desire HD, wo ich mir einen abgebrochen habe, Root zu bekommen, war Root sehr flott erledigt und das ROM, nachdem die SD-Karte angekommen war, auch
Ah, btw. das ROM ist und bleibt Englisch. Sprach und tastatureingaben lassen sich auf Deutsch ändern, das UI aber nicht.
since you are german, how about the german simcard provider..
/* ich hab ne o2 sim drinne und würde die gerne auch nutzen.. geht usbhost vernünftig? kannst du dein handy als festplatte anstecken? und dann bspw. auf bilder des handy am xoom zugreifen? DESSHALB würde ich rooten.. und der rest xD */
mikelodean7 said:
since you are german, how about the german simcard provider..
/* ich hab ne o2 sim drinne und würde die gerne auch nutzen.. geht usbhost vernünftig? kannst du dein handy als festplatte anstecken? und dann bspw. auf bilder des handy am xoom zugreifen? DESSHALB würde ich rooten.. und der rest xD */
Click to expand...
Click to collapse
Vodafone funktioniert einwandfrei!
Das mit der SD-Card scheint mir noch nicht endgültig gelöst zu sein. Fakt ist aktuell, wenn ich das Gerät anschließe bekomme ich Zugriff auf ein "tragbares Gerät" und innerhalb des Storage ist dann die SD-karte gemountet und voll verfügbar. Und ja, die SD-Karte war selbstverständlich ein Grund für Root bzw. custom kernel. Denn Root reicht nicht für den SD-Karten-Zugriff, du brauchst, soweit ich weiß mindestens den Tiamat 1.31 Kernel dafür.
I have installed the current Jelly Time Beta-8 and now I have a heavy battery drain.
With Ice Cold Sandwitch there are no problems. On Jelly Time I have to recharge after 4 hours (((
Is this a know issue?
sourcemaker84 said:
I have installed the current Jelly Time Beta-8 and now I have a heavy battery drain.
With Ice Cold Sandwitch there are no problems. On Jelly Time I have to recharge after 4 hours (((
Is this a know issue?
Click to expand...
Click to collapse
Have you tried previous beta versions of the ROM and experienced the same problem? Beta 8 features a new kernel so I wouldn't be surprised if some things have changed.
Beta 7 or Beta 8 ?
I'm on Beta 7 and I have an incredibly good battery life actually.
Did you full wipe before flashing the rom ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ich habe einen Full-Wipe gemacht, als ich die Beta-7 installiert habe.
Danach habe ich nur den Dalvin Cache gelöscht.
Ja, ich komme aktuell mit dem Laden nicht mehr nach
Was ich jedoch erwähnen muss, dass aktuell O2 Probleme mit dem Mobilen Internet bei uns in der Gegend hat.
Ich weiß jetzt nicht, ob eventuelle "Sync Timeouts" ebenfalls den Akku negativ beeinflussen.
30% => 5 Stunden
(Der Akku wurde bereits ersetzt und ist neu. Akku Probleme kann ich daher ausschließen)
Running beta 7 and when using at bat 12, I get audio but not video. I only get a black screen. Any help is really appreciate it.
Sent from my Desire HD using Tapatalk 2
Running Beta 8 and it's not really noticeable. I think that Beta 9 will fix that, but the download's not working right. Expect a mirror and try it out when you have the chance.
Sent from my Inspire 4G using xda app-developers app
Ich habe soeben die BETA-9 geflashed und jetzt ist mein Handy tot.
Der Touchscreen scheint nicht mehr zu funktionieren.
Gibt es einen Shortcut, wie ich das Handy rebooten kann, ohne den Akku zu ziehen?
sourcemaker84 said:
Ich habe soeben die BETA-9 geflashed und jetzt ist mein Handy tot.
Der Touchscreen scheint nicht mehr zu funktionieren.
Gibt es einen Shortcut, wie ich das Handy rebooten kann, ohne den Akku zu ziehen?
Click to expand...
Click to collapse
Akku=battery?
You could try using adb
Command is: adb reboot
Sent from a dream.
Ich habe jetzt die Batterie gezogen... und wenn ich in den Recovery-Mode wechseln möchte,
will er jedesmal das Radio flushen, dass leider noch auf der SD Karte liegt.
Kann ich das Umgehen?
Läuft wieder auf B8
sourcemaker84 said:
Ich habe jetzt die Batterie gezogen... und wenn ich in den Recovery-Mode wechseln möchte,
will er jedesmal das Radio flushen, dass leider noch auf der SD Karte liegt.
Kann ich das Umgehen?
Click to expand...
Click to collapse
I don't understand: leider noch auf
sourcemaker84 said:
Läuft wieder auf B8
Click to expand...
Click to collapse
Nor do I understand wieder b8
Could you post again in german, and use either bing translator (it may be better) or google translator?
Besides, there is an english only rule here on xda.
Sent from a dream.
Oh, I'm sorry. I did't realize that I wrote in german language.
I solved the issue and installed the beta-8 again. The main problem was, that I had a radio zip on the SD card and every time I started into recovery mode, I was asked to update the radio and I was still unable to start the recovery mode itself. I solved this problem by taking out the SD card, start the recovery mode and slide the SD card again to flush BETA-8.
Now it works again.
sourcemaker84 said:
Oh, I'm sorry. I did't realize that I wrote in german language.
I solved the issue and installed the beta-8 again. The main problem was, that I had a radio zip on the SD card and every time I started into recovery mode, I was asked to update the radio and I was still unable to start the recovery mode itself. I solved this problem by taking out the SD card, start the recovery mode and slide the SD card again to flush BETA-8.
Now it works again.
Click to expand...
Click to collapse
Ah! Just move the pdimg or whatever the name of the file is from the root of your sd card to avoid future issues, but you probably figured that out already.
Sent from a dream.
Yes, I have already deleted this file.
Thanks
good rom
just installed beta9.1 on my dhd, and it's working great so far. two problems: auto brightness doesn't seem to be working, or it's too dim. also, have to long press power button to wake screen. normal for other roms is short press.
debudebu said:
just installed beta9.1 on my dhd, and it's working great so far. two problems: auto brightness doesn't seem to be working, or it's too dim. also, have to long press power button to wake screen. normal for other roms is short press.
Click to expand...
Click to collapse
Also running v9.1 - auto brightness, long press & Blue tooth are all known problems. RB should have everything worked out soon, he's really committed to getting JB perfect :fingers-crossed:
I having the b7 but i just saw that the BT doesn't work. :crying:
I can not transfer files from my computer or other machine using the BT.
I can see the BT device even pair to them but failed to copy.
any ideas?
Kobibo said:
I having the b7 but i just saw that the BT doesn't work. :crying:
I can not transfer files from my computer or other machine using the BT.
I can see the BT device even pair to them but failed to copy.
any ideas?
Click to expand...
Click to collapse
still broken in b10. we all have to wait..
Offline Speech Recognition
Is there a particular reason for oflline speech recognition option not beeing availabe?
Is there a chance for it being developed.
Thanks
Sergej
I haven't noticed any battery life problems on Jellytime 8 but I haven't used if for long enough to find out.
Hello Devs,
I am a noob using oneplus one and oneplus 3,I ported sailfish os alpha v2 on my oneplus one and it was awesome!
Kindly port it for the new oneplus three too! I have always wished oneplus and jolla be partners!!! sailfish is the best os I have ever seen(my bros intex aqua fish is so awesome n snappy despite snapdragon 212!)
Hope some dev see my post and port ...I will be too oblized and happy :cyclops:
Oh yes that would be awesome!!! Plz
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
There is already a port in the works
https://github.com/Oneplus3-Sailors
But I think he could need more help though, as it only getting forward slowly. I couldn`t wait too and I`m really looking forward to the day I have a powerful Jolla device.
Ja danke, mann! Das habe ich, obwohl danach gesucht, nicht gefunden?! Merci!!!! Das wäre echt mega geil, wenn das irgendwann richtig funktionieren würde!
Thx, man! Didn't find that, even after searching?! Yes, it would be so great to have a fully working jolla build!!!
Ja nice!! Würde mich freuen, wenn du mich irgendwie hinzufügen könntest! (@modzilla99)
Ja als ich Sailfish installiert hatte auf meinem OPO gab es halt nur die erste Beta und da lief so einiges noch nicht richtig, hat aber definitiv gereicht, um mich zu beeindrucken ^^
(Ich kann dir irgendwie keine Privatnachricht senden :/ )
Gesendet von meinem ONEPLUS A3003 mit Tapatalk