Last week I gave my iPad to my friend and went for my first Android experience. XOOM. I bought it from Axiom in Dubai. It was “International Retail” version.( H.6.1-38-9) . Stock 3.0.1
As I said, I had no experience in Android but XOOM lack of functionality and problems forced me to go for upgrading it.
I started my search about “What is ROOTing?”, “Idiot guide” , “ROOT for dummies” … but after a week of study and “try and error” , I have a XOOM with :
OS : HC 3.1
ROM : Tiamat 1.1 /1.4.5 (Newest version)
Recovery : Clockwork 3.2.0.0 (Newest version)
Radio : GSM Based 3G/Edge is working (with different SIM card)
SD : SD card fully functional
WiFi : NO problem at ALL ! no disconnection, no of any kind.
Here I want to share my knowledge with you, Thanks to XDA-Developer forum and its users.
Warning: Read your Motorola warranty card and if you decide to lose their support then do the Rooting/upgrading at your own risk. This is only for educational purposes.
Let's Start
1. Install SDK on your PC . Really easy.
-Put SDK path in your PC’s path . This is necessary for you if you want to use ADB commends anywhere in your PC: C:\Program Files (x86)\Android\android-sdk\;C:\Program Files (x86)\Android\android-sdk\tools\;C:\Program Files (x86)\Android\android-sdk\platform-tools\;C:\Program Files (x86)\Java\jre6\bin\;C:\Program Files\Java\jdk1.6.0_26\bin\;C:\Program Files\Java\jre6\bin\
-See this as well : http://www.xda-developers.com/android/adb-easy-tutorial/
2. Get to know ADB / Fastboot command . with these:
- http://forum.xda-developers.com/showthread.php?t=502010
- http://forum.xda-developers.com/showthread.php?t=517874
- http://www.xoomforums.com/forum/motorola-xoom-hacking-guides/6795-basic-commands-newcomers-adb.html
3. Ok . Now you are ready for going for ROOT your device . by ROOT, you can have FULL access to your device file system.
-Read this : http://forum.xda-developers.com/showthread.php?t=1049901 Very good help. Skip the last part about installing modules because you are going to install new one later.
After ROOT, there is an application named SUPERUSER on your XOOM. Just run it, if you see no errors, then you did your job correctly.
4. Ok. Now you should install RECOVERY . This is necessary for other steps. With it, you can install ROM and also get backup and use it in case of emergency!
-Read This : http://forum.xda-developers.com/showthread.php?t=1130996 (JUST go to step 4)
-Read and use this Recovery Image: http://forum.xda-developers.com/showthread.php?t=1074979 (Use Method2)
- Test if you can go to Recovery screen . Go through menus.
- Make your SD card ready . 2GB is enough. Format it with your windows and in FAT32.
- Put it inside your XOOM , Go to Recovery , and get your first backup . Thn your are ready for next step
5. Ok . In this step we are going to install 3.1 on your XOOM !.
- Read this: http://forum.xda-developers.com/showthread.php?t=1089695
- The whole things is : Get some file from your XOOM – Keep them somewhere – Install regular 3.1 US version(http://forum.xda-developers.com/showthread.php?t=1074609-In this STEP 4 is VERY important to do) – Push back your own files to the device. That’s it.
EDIT : (12 - JULY - 2011) - U can now install AU version instead of US version . Much easier and safer : http://forum.xda-developers.com/showthread.php?t=1089695
- In every step you can get backup in your Recovery as well
6. Last Step . Install the latest Tiamat ROM .
- Read this: http://forum.xda-developers.com/showthread.php?t=1146153
Enjoy your XOOM .
RedSat!
Does it support the Korea Version which is WCDMA+WIFI?TKS
Dude, appreciate your work.... but why can't you be more specific in installation in your own language, without providing the links.........
Sent from my MZ601 using XDA App
redsat said:
this STEP 4 is VERY important to do) – Push back your own files to the device. That’s it.
- In every step you can get backup in your Recovery as well
!
Click to expand...
Click to collapse
hey, can u be more specific on this step......
which file to push back to xoom ?
EDIT: heheheh : i'm the first to "THANK" you... !!!
Big Thanks! But i'd like you also to be more specific on the files to push back. it's the telephone.db after all i had read before..my sd-card will arrive today and i'm keen on flashing right after getting home
And the only point i _allways_ don't get, is about pushing back your own files.
How to bakup them and how to restore.
can't find them in titanium or CWM
thx anyway!
Edit: damn it hast to be _in_ data.img from cwm backup but how to get it out?
triksgold said:
Does it support the Korea Version which is WCDMA+WIFI?TKS
Click to expand...
Click to collapse
It seems u have CDMA version not a GSM. Then U should be able to use US version. Study first.
Dave-Kay said:
Big Thanks! But i'd like you also to be more specific on the files to push back. it's the telephone.db after all i had read before..my sd-card will arrive today and i'm keen on flashing right after getting home
And the only point i _allways_ don't get, is about pushing back your own files.
How to bakup them and how to restore.
can't find them in titanium or CWM
thx anyway!
Edit: damn it hast to be _in_ data.img from cwm backup but how to get it out?
Click to expand...
Click to collapse
You have to pull those files after Root and before update to 3.1with ADB commands. The most important one is build.pro. If u have ur backups, restore ur phone to that stage, pull out the files and update again.
Attached u can find necessary files. These are for "International Retail Version". I've tested with 4 different SIM cards .
redsat said:
You have to pull those files after Root and before update to 3.1with ADB commands. The most important one is build.pro. If u have ur backups, restore ur phone to that stage, pull out the files and update again.
Click to expand...
Click to collapse
So from "adb push settings.db /data/data/com.android.providers.settings/databases/settings.db"
i make "adb pull settings.db /data/data/com.android.providers.settings/databases/settings.db" before?
My Device has only root and CWM till now. nothing bad happened. I'd like to be sure _before_ flashing new image
Dave-Kay said:
So from "adb push settings.db /data/data/com.android.providers.settings/databases/settings.db"
i make "adb pull settings.db /data/data/com.android.providers.settings/databases/settings.db" before?
My Device has only root and CWM till now. nothing bad happened. I'd like to be sure _before_ flashing new image
Click to expand...
Click to collapse
See the last post. I sent files for you . Pull all those or use mine.
Be brave and go for it
fairyshacker said:
hey, can u be more specific on this step......
which file to push back to xoom ?
EDIT: heheheh : i'm the first to "THANK" you... !!!
Click to expand...
Click to collapse
Read posts carefully then I'm sure u can do it . See post 7. I attached needed files there.
hmpf
http://forum.xda-developers.com/showthread.php?t=1074609
the file in Step4, which you said we have to do also, is missing
404
Edit: found it elsewhere (if it's the right one...) http://www.android.net/forum/downloads.php?do=file&id=49
Dave-Kay said:
http://forum.xda-developers.com/showthread.php?t=1074609
the file in Step4, which you said we have to do also, is missing
404
Edit: found it elsewhere (if it's the right one...) http://www.android.net/forum/downloads.php?do=file&id=49
Click to expand...
Click to collapse
U really is going for it . Ok . I cheked and u were right . Here is file which I used
redsat said:
U really is going for it . Ok . I cheked and u were right . Here is file which I used
Click to expand...
Click to collapse
Sure am i!
What do you think?
OK, one last question, then i am ready for takeoff.
It's about build.prop should the one i pulled work? should i take frankenheim, or what else to do with that?
Edit: g2g now. will do flash at 11pm or something like it
Your Help is much appreciated! THX!
Dave-Kay said:
Sure am i!
What do you think?
OK, one last question, then i am ready for takeoff.
It's about build.prop should the one i pulled work? should i take frankenheim, or what else to do with that?
Edit: g2g now. will do flash at 11pm or something like it
Your Help is much appreciated! THX!
Click to expand...
Click to collapse
I myself used build.frankenheim
I'm keeping my fingers crossed for u.
done till Step5, everything is fine. Downloading Tiamat now
redsat said:
It seems u have CDMA version not a GSM. Then U should be able to use US version. Study first.
Click to expand...
Click to collapse
I‘m using MZ601.It's really support the WCDMA/2100MHz without the CDMA.
Dave-Kay said:
done till Step5, everything is fine. Downloading Tiamat now
Click to expand...
Click to collapse
As your are German, too: How does your new ROM perform on the Xoom?
Also got the MZ601. Can you please share your experiences with it on Tiamat? Worth doing? Benefits?
Thanks
basthet said:
As your are German, too: How does your new ROM perform on the Xoom?
Also got the MZ601. Can you please share your experiences with it on Tiamat? Worth doing? Benefits?
Thanks
Click to expand...
Click to collapse
ja, Deutscher.
Habe Tiamat installiert und bin recht zufrieden. Der Vorteil mit Tiamat ist nicht so groß wie mit Android Revolution auf dem Desire HD aber es ist ein guter Anfang und letztlich werden das vermutlich auch die Entwickler so betrachten. Mir ging es zunächst um Root und eben darum Chef des Gerätes zu sein. Ich wollte auf Titanium und ein paar andere Gimmicks nicht verzichten, die ich von ARHD gewohnt bin. Aber am Ende rootet man ja sein Gerät nicht nur zum Selbstzweck Also neues ROM und los.
Tiamat ist stabil und flüssig und kann eben auch mit der eigens für das XOOM bestellten SD-Karte umgehen.
Ob sich das für dich lohnt, kann ich nicht sagen, für mich ist klar, ein sehr guter Anfang ist gemacht, das Gerät ist offen, Backup funktioniet, jetzt fehlt nur noch ein Stück weit die lebendige Developer-Comunity
Die Prozedur sieht btw. a Ende deutlich komplizierter aus, als sie ist.
Im gegensatz zum Desire HD, wo ich mir einen abgebrochen habe, Root zu bekommen, war Root sehr flott erledigt und das ROM, nachdem die SD-Karte angekommen war, auch
Ah, btw. das ROM ist und bleibt Englisch. Sprach und tastatureingaben lassen sich auf Deutsch ändern, das UI aber nicht.
since you are german, how about the german simcard provider..
/* ich hab ne o2 sim drinne und würde die gerne auch nutzen.. geht usbhost vernünftig? kannst du dein handy als festplatte anstecken? und dann bspw. auf bilder des handy am xoom zugreifen? DESSHALB würde ich rooten.. und der rest xD */
mikelodean7 said:
since you are german, how about the german simcard provider..
/* ich hab ne o2 sim drinne und würde die gerne auch nutzen.. geht usbhost vernünftig? kannst du dein handy als festplatte anstecken? und dann bspw. auf bilder des handy am xoom zugreifen? DESSHALB würde ich rooten.. und der rest xD */
Click to expand...
Click to collapse
Vodafone funktioniert einwandfrei!
Das mit der SD-Card scheint mir noch nicht endgültig gelöst zu sein. Fakt ist aktuell, wenn ich das Gerät anschließe bekomme ich Zugriff auf ein "tragbares Gerät" und innerhalb des Storage ist dann die SD-karte gemountet und voll verfügbar. Und ja, die SD-Karte war selbstverständlich ein Grund für Root bzw. custom kernel. Denn Root reicht nicht für den SD-Karten-Zugriff, du brauchst, soweit ich weiß mindestens den Tiamat 1.31 Kernel dafür.
Related
Hello,
where can I get the WinMob6 ROM Udate for the HTC TyTN? The HTC Support told me that there is no update available...but there was an V6 Update...
German version (if there are differences) would be great!
Greetings
B
erdenkind said:
Hello,
where can I get the WinMob6 ROM Udate for the HTC TyTN? The HTC Support told me that there is no update available...but there was an V6 Update...
German version (if there are differences) would be great!
Greetings
B
Click to expand...
Click to collapse
All the official WM6 builds are here
Edit: if you want a unofficial 6.1 cooked build, HardSPL your phone then chose a rom to flash from the many that are here, they are far better than the old WM6 buils.
Thanks.
But could yu please help me:
Please give me one good working ROM with 6.1....link and filename! There are so many files mentiones verywhere that a beginne rlike me has got some problems recognizing the rigth files;-) I don't want to loose my working HTC
Are those ROMs also german versions?????
erdenkind said:
Thanks.
But could yu please help me:
Please give me one good working ROM with 6.1....link and filename! There are so many files mentiones verywhere that a beginne rlike me has got some problems recognizing the rigth files;-) I don't want to loose my working HTC
Are those ROMs also german versions?????
Click to expand...
Click to collapse
1) download hardspl from here and flash it
2) reflash the radio of your choice
3) flash a rom
About the roms, if you want english, and want Manilla 2d, I would flash one of Joshes roms from here
There isnt many german roms.
Starbase's german M2D here
If you want an english plain rom, I would suggest CRCs here
But there are many others I haven't trired, so the best is to look around and flash.
IF YOU WANT TO KEEP A ROM FOR A LONG TIME AND AVOID STABILITY ISSUES, PLEASES FLASH A OEM ROM BETWEEN COOKED ROMS
Usethis or any oem rom
Hi!
What means "reflash the radio of your choice?????" ...stupid german can't understand the meaning of radio....
erdenkind said:
Hi!
What means "reflash the radio of your choice?????" ...stupid german can't understand the meaning of radio....
Click to expand...
Click to collapse
If you HardSPL it overwites your radio rom, in order to unlock it ect.
A radio rom, is the bit that controlls all the phone functions, the signal you get, and the type of connection you get (gprs/3dge/3g/H) newer isn't always better but you will want a 1.4+ radio in order to get 3G reception.
List of Radio roms.
Beware, flashing your radio can be fatal, so make sure you have enough battery, and dont disconnect your phone while your doing it.
To be safe I would recomend you do it this way
@veyka:
I'll try to help and switch to german ;oD
@erdenkind:
Hallo erdenkind und willkommen beim Flashen. Sei gewarnt, dass Du das ganze auf eigene Gefahr machst. Du kannst den Hermes durchaus "zerschiessen"!
Nun zu Deinen Fragen:
Ein Gerät hat immer ein Firmware und ein Radio Rom. Du kannst i.d.R. beide unabhängig voneinander flashen.
Bevor Du ein "gekochtes" Rom flashst, musst Du ein HARD-SPL durchführen. Ich würde Dir dies hier empfehlen - http://forum.xda-developers.com/showthread.php?t=340468
Mit der 2.60 hat bei mir alles funktioniert, bei der 2.10er hat's geklemmt.
Als Rom benutze ich zur Zeit dies - http://forum.xda-developers.com/showthread.php?t=458456 und zwar die "All Back". Laeuft sehr zuverlaessig, ist aber englisch.
Beim flshen laeuft er bei mir immer bei 100% gegen den Poller. Das Utility meldet einen Kommunikationsfehler und auf dem Hermes bleibt alles bei 100% stehen. Keine Angst, Batterie raus, wieder rein, starten und los geht es (der erste Start dauert etwas, nicht nochmal neu flashen) mit dem Kalibrieren. Sollte mal was schiefgehen, findest Du hier immer Hilfe, meistens jedoch auf englisch. Deutsche Roms für den Hermes kann man uebrigens an einer Hand abzaehlen...
Ich hoffe, dass ich Dir ein wenig weiterhelfen konnte. Viel Spass beim Ausprobieren...
...Eins habe ich noch vergessen. Zum Flashen solltest Du den Hermes auf mindestens 50% Batterieladung haben, 90% ist besser. flashen ist uebrigens auch ueber eine Sd-Karte moeglich. Eine Anleitung dazu gibt es im WIKI
goy2k said:
@veyka:
I'll try to help and switch to german ;oD
Click to expand...
Click to collapse
Thank you, I was going to try machine translation but it would probs have made it worse
...I know about this. It's always a lot to laugh when we get "automatic" transtations. But german is an awful language (for germans too ;oD). By the way, I haven't done a translation of your hints. I tried to describe it in my own words and out of my experiance.
By this way I'd like to thank again all user of this forum for their patience with us, beeing newbies...
goy2k said:
...I know about this. It's always a lot to laugh when we get "automatic" transtations. But german is an awful language (for germans too ;oD). By the way, I haven't done a translation of your hints. I tried to describe it in my own words and out of my experiance.
By this way I'd like to thank again all user of this forum for their patience with us, beeing newbies...
Click to expand...
Click to collapse
If you have the time, it might be useful if you wrote a formal howto flash your phone guide, in German, which I can tag onto the end of the FAQ, it might help some people.
Just drop me a PM if you are interested
As for the patience, you caught me on a good day
Hallo goy2k,
danke für die schnelle Hilfe
Nun hab ich noch ein ActiveSync Thema: HTC meldet version 4.5 oder neuer benutzen...pc meldet "allgemeiner fehler"....MIST! Hab schon Dei-Neuinstalliert, Gebootet, HTC zurück gesetzt...keine Chance:-( ActiveSync Ordner auch schon gelöscht usw...
graz
erdenkind
@veyka:
I'll try to do it. Will give a feedback after weekend, because my wife and me are out of town...
@erdenkind:
Probleme mit activesync gibt es manchmal. Schuld daran ist zuweilen die Einstellung unter Start - Einstellungen - Verbindungen - USB to PC. Dort den Haken bei "Erweiterte Netzwerkfunktionen" entfernen. Falls das nicht hilft, melde Dich nochmal. Über das Wochenende bin ich nicht zu hause, eine Antwort kann dann etwas dauern...
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
erdenkind said:
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
Click to expand...
Click to collapse
Make sure you have your operators OEM rom downloaded and saved. There isn't a good noob way to just save your rom from your phone (that I know of), so reflashing is the way to go.
You can use something like pim backup to save your contacts and such.
erdenkind said:
[email protected]!
How can I make a Backup of my original ROM/Radio on the htc before running into trouble with another ROM version not working properly;-)????
Click to expand...
Click to collapse
You can dump the rom but as far as I know it doesn't produce a flashable file off the bat, but all the OEM roms are on the wiki
veyka said:
You can dump the rom but as far as I know it doesn't produce a flashable file off the bat, but all the OEM roms are on the wiki
Click to expand...
Click to collapse
yea if you were to dump the rom using a tool called "grab it" you would then need to spend time decrypting the dump and then have knowlege of how to use a rom kitchen into rebuilding it back into a somewhat usable rom image.
joshkoss said:
yea if you were to dump the rom using a tool called "grab it" you would then need to spend time decrypting the dump and then have knowlege of how to use a rom kitchen into rebuilding it back into a somewhat usable rom image.
Click to expand...
Click to collapse
That was pretty much what I was thinkin, shame there isnt a easier way.
Hello Diamond Fans,
i have build ROM's for the Trinity in the past and right now i thought it was time to share my new German ROM for the Diamond and i hope you will like it. It is not too heavy so it is only a basic Titanium version.
Full Version (14/06/10)
-Fixed eT9 On/Off problem
-changed Bluetooth reg
Add
-Facebook
-Footprint(modded for TomTom Navigation)
-GoogleMaps 4.1
-HTC Album 3
-Pre installed Marktplatz 1.2
-ConnectionSetup 3.1
-YouTube 2.6
-and changed some regs
http://rapidshare.com/files/398940786/Lalle-23547-05-Full.rar
Updated Version (25/05/10)
-Fixed WM65 Lockscreen (thx-veisen)
-Battery Drain Fix
-Youtube 2.5 maybe Fixes a little the lags
-Audiobooster
-and more....
http://rapidshare.com/files/391115055/Lalle-23547-04-GER-NewLS.rar
Fixed Version (19/04/10):
Bug correction: Updated et9 Version from 1.5 to 2.0
http://rapidshare.com/files/377782165/Lalle-23547-03-GER.rar
New Version with extra(13/04/10):
QuickGps
Youtube
StreamingMedia
HtcGps-App
USB-Plug-Popup
http://rapidshare.com/files/375471038/Lalle-23547-02-GER.rar
Details (31/03/10):
XIP/SYS - 23547/23547.5.5.0
Free RAM - 58MB/124MB
Titanium
2G Ogi-Dialer
New Office+Email
Adobe PDF 2.5.1.0.404840.03
RSSHub 2.1.1.1071
Teeter
Arcsoft MMS 5.2.0.47
BT_SAP
BT_FTP
CMInternetSharing 1.1.5.1
EZInput 1.5
and more...
http://rapidshare.com/files/370400392/Lalle-23547-01-GER.rar
Have fun Lalle!!!
P.S.
many thanks to ervius for his kitchen and all other guys here in the forum for sharing all the new good stuff for the HTC phones.
great!
a new german rom-cooker!!!!!
will you also release a rom with sense?
Dunnera said:
great!
a new german rom-cooker!!!!!
will you also release a rom with sense?
Click to expand...
Click to collapse
Sorry Dunnera not at the moment.
Lalle said:
Sorry Dunnera not at the moment.
Click to expand...
Click to collapse
ok no problem
but maybe you can share your kitchen?
Kann man dieses Rom für den produktiven Einsatz nutzen und es funktioniert alles, oder ist es nur eine Bastelei um zu sehen wie WM 6.5 läuft?
Ich schreibe mal in Deutsch weil es sich hier um ein Deutsches Rom handelt und hier mehr Unterwegs sind die auch Deutsch können.
Also ich hab das ROM File installiert und bin ganz zufrieden damit. Einziges problem ist derzeit das ich nichts finde um QuickGPS nachzuinstallieren. Hab zwar IGO 8 zum laufen bekommen, aber die Navi hat ca. 30 Minuten gebraucht bis brauchbare GPS Siganle gefunden hat.
Hat einer ne Idee wo ich ein funktionierendes QuickGPS for Windows Mobile 6.5 bekomme? Alles was ich bis dato installiert habe, hat entweder gesagt falsches Sicherheitszertifikat oder "Failed to create empty document".
Kajada said:
Kann man dieses Rom für den produktiven Einsatz nutzen und es funktioniert alles, oder ist es nur eine Bastelei um zu sehen wie WM 6.5 läuft?
Ich schreibe mal in Deutsch weil es sich hier um ein Deutsches Rom handelt und hier mehr Unterwegs sind die auch Deutsch können.
Click to expand...
Click to collapse
Yes its for daily use, I have test it for a view weeks before and its for me a requirement to create a ROM for daily use!!!
Sorry for the problem with the QuickGps function, I have seen that issue before in my test phase but I do not have that long fix time as described.
Lalle!
Hi Lalle,
first of all thx for your ROM. Regarding the QuickGPS... means that you cannot fix it in general? So how to you use the GPS function today on your device? Is there any alternative software to speed up the sattelite finding?
rgds
Moonshinemister
What about the weather in titanium? I cant find it like on your screenshot..
Hi,
thx for your ROM, looks good. I will try it as soon as QuickGPS works. Without QuickGPS my Diamond is taking too much time to find satellites.
Do you working on a bugfix?
Thanks a lot!
taurus
Halle, ich aus China , und ich bin ein Deutsch lerner. Koennen Sie mir helfen? Hier ist meine email adress:[email protected]
Got this ROM installed on a Diamond I just inherited. Runs fine and stable. I like it. Thanks Lalle.
mista.duke said:
What about the weather in titanium? I cant find it like on your screenshot..
Click to expand...
Click to collapse
Hi mista.duke,
you have to use the free "Home Customization" from MS Marketplace, you can add a new Panel called Weather and its for free.
Also a good app is the "Lock Device" App for automatic lock function.
Lalle
I recognized this morning that my Diamond had a much lower transfer rate on WLAN than my Artemis for he same download. As I assume that the WLAN drivers are included in the ROM do you think it could be caused by the drivers or is the diamond known for a bad WLAN module?
taurusfx said:
Hi,
thx for your ROM, looks good. I will try it as soon as QuickGPS works. Without QuickGPS my Diamond is taking too much time to find satellites.
Do you working on a bugfix?
Thanks a lot!
taurus
Click to expand...
Click to collapse
http://www.danielsteiner.net/quickgps.cab
you can find some other stuff at my small fix / patches repository @
http://www.danielsteiner.net/winmobile/Devices/HTC TD1
for touch diamond stuff
Regarding the WLAN issue I found that the setting was set to battery friendly (by default ) instead of the medium position. I will try if this improves things.
On issue with the ROM:
When I plug in the USB cable it's not asking for Active Sync or USB direct connection as it should. I have to pull up the menu manually and change it.
Froggerboy said:
Regarding the WLAN issue I found that the setting was set to battery friendly (by default ) instead of the medium position. I will try if this improves things.
On issue with the ROM:
When I plug in the USB cable it's not asking for Active Sync or USB direct connection as it should. I have to pull up the menu manually and change it.
Click to expand...
Click to collapse
Hi Froggerboy,
the thing with the USB cable function is okay so far because I have not include the popup in the ROM.
For the Quick GPS function I do not have the problems of getting 3D fix and with other ROMs before I got not that benefit as it should be... so it was not neccessary for me but I am loocking into it.
Lalle
Finally another German ROM!
Thanks a lot. I will try it. Have been waiting for a long time for a German ROM.
The WLAN issue did not really change but a search indicated that this is a known problem with the diamond. Though I haven't found the reason nor a solution for the problem.
What is your reason to disable the popup?
I thought the diamond has A-GPS. Ain't that good enough? Quick GPS isn't working on my diamond but TOMTOM and Smartrunner get a fix rather quickly.
Froggerboy said:
The WLAN issue did not really change but a search indicated that this is a known problem with the diamond. Though I haven't found the reason nor a solution for the problem.
What is your reason to disable the popup?
I thought the diamond has A-GPS. Ain't that good enough? Quick GPS isn't working on my diamond but TOMTOM and Smartrunner get a fix rather quickly.
Click to expand...
Click to collapse
Did you try MTTY before flashing? If you got a problem, that the cook doesn't have it might come from too many different flashes.
Give it a try.
Sorry Rom Offline for Rebuild....
Include FightSpit's super circle in the next update please.
Das ist ja eins zu eins von SamSet kopiert dein Changelog...
@jim_panse yes that's true because this is my first time modding Android roms.
SORRY MY ENGLISH IS NOT SO GOOD!Yes thats is truth because this is my first Time in Modding an Android Rom.
guys..... this is an english forum, so......speak in english
English plz?
Sent from my GT-I9000 using XDA App
I've taken a look at your blog. It would be better to post whats there, here.
jim_panse said:
Das ist ja eins zu eins von SamSet kopiert dein Changelog...
Click to expand...
Click to collapse
he means, that the changelock is the same then samsets ones !
Greetz
jim_panse said:
Das ist ja eins zu eins von SamSet kopiert dein Changelog...
Click to expand...
Click to collapse
Hab ich auch gedacht. Schöne schrift wenigstens.
kgk888 said:
Hab ich auch gedacht. Schöne schrift wenigstens.
Click to expand...
Click to collapse
Jop, die Icons sind aber auch ganz in ordnung
some people are ignorant to the rules seems weve got a couple of them in this thread
regards
GAMMELIGESROM/ SCRUFFY ROM
CLOSED
for our new ROM go to http://forum.xda-developers.com/showthread.php?t=1031038
Pictures please
Du darfst hier nicht auf deutsch posten. Ausserdem kann sich auf romkitchen.org jeder selbst seine ROM klicken.
You forget a little thing...the English translation
"GammeligesROM" hahaha
Naja, für 13 Jahre respekt But, please speak english
Gammelgustav said:
GAMMELIGESROM
Hey Leute, in diesem Thread stelle ich euch mein eigenes ROM vor.
Ich habe lange daran gearbeitet und hoffe es gefällt euch!
Ich bin ein absoluter Neuling (13 Jahre ) aber ich habe trotzdem versucht ein eigenes ROM zu entwerfen, nachdem ich von darkys bzw. Hamsters begeistert war.
In Version 1.0:
( mal gucken, ob noch welche folgen) habe ich den K12o Kernel mit 500hz integriert damit euer Galaxy S auch auf Speed kommt
Es basiert auf der 2.2.1 JPY und ist mit dem Gingerbread-Theme von gtg465x (http://forum.xda-developers.com/showthread.php?t=863860 Dafür gebührt ihm der Dank!) ausgestattet, damit 2.3-Feeling aufkommt.
Integrierte Apps:
SGS-Tool
ROM Manager
Titanium Backup
Ich habe den neuen GTG-Launcher integriert und einen Gingerbread Launcher.
( Ich bin mir nicht ganz sicher, wie das ist mit dem Theme und dem Launcher, also...)
Danke an alle Leute, die mir ein Feedback geben (mehr als evtl. "es klappt nich" wäre hilfreich ) und/oder den Thx-Button glücklich machen
Sorry ich versuche es morgen noch einmal mit dem Donload-Link
Click to expand...
Click to collapse
I'll make a short translation for that ... might be that i forgot something ...
lol for the rom-name ^^
ScruffyROM / Gammeliges ROM
Hey,
in this thread i'd like to introduce and serve you my ROM. I've worked a long time on it and i hope u like it.
I am absolutely new on this (I am already 13y old), but I wanted to create my own ROM after I've been so enthused/fascinated by Jim's ROM and Darky's ROM.
Version 1.0
- XXJPY Base
- Hardcore's Speedmod Kernel K12O 500Hz
- GTG465X Gingerbread Theme + Launcher
- Gignerbred Launcher
Also included
- SGS-Tools
- ROM-Manager
- Titanium Backup
I will retry to upload the ROM 2morrow ... sorry for that ...
Hope some of you try it and would give me some feedback.
@PhilAd danke ich war grade dabei aber da biste mir wohl zuvor gekommen
@TubeShaped 1.sorry but i work on an englisch translation
2. i know that you can "cook" your own custon ROM at romkitchen.org but this is only a stock jpy with a half-customizable kernel and
some apps you can add
also -> if you would like to say every custom roms before like "darkys" are useless.... wrong!
screenshots, and( i´m very sorry about that!) the download link will come soon (hopefully tomorrow!)
Gammelgustav said:
@PhilAd danke ich war grade dabei aber da biste mir wohl zuvor gekommen
@TubeShaped sorry but i work on an englisch translation
screenshots, and( i´m very sorry about that!) the download link will come soon (hopefully tomorrow!)
Click to expand...
Click to collapse
you should use an english translation in the first post ... you can use my translation and change it ... or you can make your own ... i just did that shortly so that everyone can read it until there is an english text in the first post.
rom namen... humpf ^^
The youngest ROM cooker: 13 years old!
Assuming he doesn't speak/write english.
Good work kid
he should add a scruffy bootanimation and background :-D
and the main color should be brown xD
PhilAd said:
he should add a scruffy bootanimation and background :-D
and the main color should be brown xD
Click to expand...
Click to collapse
I will try to design my own boot animation for the next version (1.1)
Sent from my GT-I9000 using XDA App
Good job Gammelgustav, you have skills, keep working and studying.
Great Gustav! keep going on!
Awsome nickname and ROM name!
Klasse!
Keep doing what you like young man
Sent from my Nexus S
Well done, I'm indeed delighted to have someone as young as you. Keep it up!
Sent from my GT-I9000 using XDA App
Please look at my first post again--> i have a big problem
To user the newer edify scripts u need to have the updater binary with the script.
I would not go for edify today as the documentation on it pretty weak.
Perhaps you can pm jim panse to seek his advice on the updater script. And it must be used together with the update-binary.
Sent from my GT-I9000 using XDA App
DocRambone said:
To user the newer edify scripts u need to have the updater binary with the script.
I would not go for edify today as the documentation on it pretty weak.
Click to expand...
Click to collapse
So should I use the older Amend script? (is the update-binary with tis neccessary, too??)
But there was an error too (Status 4)
[email protected]*
Joar now I've done it, that will not boot my note2.* So I have the Note2Core 2:10 innstalliert kernel to go into the recovery-twrp-2.3.1.1-N7100 recovery menu.* Power of habit I've made it with the rom manager where I "start the recovery menu" was pressed.* Now is no longer on my note2, nothing shows (black screen) whom I to the pc nothing anschliese who I. It to be power supply anschliese nothing, purely battery out, ncihts* joar, please help me ...
and now again in german my mother languge: Hallo erst mal. Joar jetzt hab ich es geschafft, das mein note2 nicht mehr startet. Also ich hab den Note2Core 2.10 kernel innstalliert und wollte ins recovery-twrp-2.3.1.1-N7100 recovery menü gehen. Macht der gewohnheit hab ich es mit dem rom manager gemacht in dem ich "starte ins recovery menü" gedrückt habe. Jetzt geht mein note2 nicht mehr an, zeigt gar nichts(black screen) wen ich es an den pc anschliese nichts, wen ich es an sein netzteil anschliese nichts, akku raus rein, ncihts. joar, bitte helft mir...
If you have a working nandroid backup reboot in recovery and restore the backup. If you don`t have that flash a stock rom with Odin. After that reroot mate.
i have a recovery-twrp-2.3.1.1 backup, because i dont can use, my note maks nothing, not the logo with the name.
Conan179 said:
i have a recovery-twrp-2.3.1.1 backup, because i dont can use, my note maks nothing, not the logo with the name.
Click to expand...
Click to collapse
If you can`t restore a backup, go in downloadmode and flash a stock rom with Odin. You need a T-Mobile stock rom?
my note dosnt boot to the download modus. its dosnt boot anyway. the display is black and maks nothing.
Conan179 said:
my note dosnt boot to the download modus. its dosnt boot anyway. the display is black and maks nothing.
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and reinsert the battery and try to get into downloadmode. Do you have a jig?
nope, nothing
Conan179 said:
nope, nothing
Click to expand...
Click to collapse
Try to get a jig, that usualy gets you into downloadmode. And otherwise you have to take it to the store for repair. Look on Google/XDA for a way to restore the phone if possible.
i can switch the device, by my netcarrier (Vodafone germany) als last way.
thanks i looking at a jig.
Greetz Conan
edit: allreigt i have found, what a jig is, i can build him, self and buying takes too long.
i call vodafone and make a device switch.
Thanks for you heling gee2012
the "nosent work" is incorrect, in the darknes i see, a little red led blinking rieght of the speaker.
Allrieht, today cam my switch Note2 from Vodafone.
i think for the next time i sell me a jig.
Greetz Conan