Hi guys I just got this phone few weeks ago and I need help.
So In Finland there is still no Jelly bean update so what do you recommend : still wait for update or install jb rom?
And if I install sakuradroid JB does me need to install official XXMC8 before I install custom rom?
I've read that some people have only 550mb ram and JB need over 600mb so need to Install another JB before to get 600mb ram.
Niquel97 said:
Hi guys I just got this phone few weeks ago and I need help.
So In Finland there is still no Jelly bean update so what do you recommend : still wait for update or install jb rom?
And if I install sakuradroid JB does me need to install official XXMC8 before I install custom rom?
I've read that some people have only 550mb ram and JB need over 600mb so need to Install another JB before to get 600mb ram.
Click to expand...
Click to collapse
Just install MB4(JB) then you can install Sakuradroid.
Kilstor said:
Just install MB4(JB) then you can install Sakuradroid.
Click to expand...
Click to collapse
Can't install mb4 odin shows me fail when I flash and I don't have csc and pit file for mb4 where I can get them?
I have flashed mb2 and I will try to install sakuradroid Jb now.
Niquel97 said:
Can't install mb4 odin shows me fail when I flash and I don't have csc and pit file for mb4 where I can get them?
I have flashed mb2 and I will try to install sakuradroid Jb now.
Click to expand...
Click to collapse
Unpack the zip file you downloaded, everything should be there...
SpacedroidS said:
Unpack the zip file you downloaded, everything should be there...
Click to expand...
Click to collapse
The hotfile link which is posted here some thread about all custom roms flashing stuff like that there is no these files only .tar file.
I'm not that stupid that I don't exctract them still no files.
I wanna install sakuradroid JB but it's weird .bz file so I can't exctract it . What can I do?
Niquel97 said:
The hotfile link which is posted here some thread about all custom roms flashing stuff like that there is no these files only .tar file.
I'm not that stupid that I don't exctract them still no files.
I wanna install sakuradroid JB but it's weird .bz file so I can't exctract it . What can I do?
Click to expand...
Click to collapse
Use 7-zip to extract it winrar wont work.If your not near a PC (my case) i used B1 Free Archiver from the market its the only one that extracted it,when you extract it once you will get another .zip extract it and you have your file format /system wipe data flash it and your done
Sent from my GT-I8160 using xda app-developers app
Related
Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
xboarder said:
Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
Click to expand...
Click to collapse
there should be a tar file in the zip just unzip the file you downloaded
jerrycoffman45 said:
there should be a tar file in the zip just unzip the file you downloaded
Click to expand...
Click to collapse
There are only 2 files in the zip file.
KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
SS_DL.dll
Thanks for replying.
Can I flash the md5 file with ODIN? What's the purpose for the dll then?
xboarder said:
]KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
Click to expand...
Click to collapse
^^^ This is what you want to use in the PDA section. You can ignore the DLL.
Yeah just flash the md5 file in odin as PDA. I have no idea what the dll file is for
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I just flashed the .md5 with ODIN, and it's working great.
Thanks to all of you for your quick response and help. Very much appreciated.
I flashed miui, but i now would like to return to stock, all the firmwares i downloaded with a flash_all.bat or anything of the sort is not in english and im afraid i would brick my phone. Is there a fllashable zip through the stock recovery to return to official firmware? Or if anyone could post a firmware installer with instructions in english. Thank you very much
UhmierSmith said:
I flashed miui, but i now would like to return to stock, all the firmwares i downloaded with a flash_all.bat or anything of the sort is not in english and im afraid i would brick my phone. Is there a fllashable zip through the stock recovery to return to official firmware? Or if anyone could post a firmware installer with instructions in english. Thank you very much
Click to expand...
Click to collapse
Download Any Official Firmware Or Custom ROM Like HYD52ROM Or Clean ROM They Both Are Almost Stock firmware With Tweaks And Removed Chinese Craps.
husen4u said:
Download Any Official Firmware Or Custom ROM Like HYD52ROM Or Clean ROM They Both Are Almost Stock firmware With Tweaks And Removed Chinese Craps.
Click to expand...
Click to collapse
Thanks but for those roms you need to be on b11cn, which i cant get to cause im stuck on miui, help? before miui i was on b111
UhmierSmith said:
Thanks but for those roms you need to be on b11cn, which i cant get to cause im stuck on miui, help? before miui i was on b111
Click to expand...
Click to collapse
Ok Then Download Official Firmware B125 And Install Via dload/update.app Method.
husen4u said:
Ok Then Download Official Firmware B125 And Install Via dload/update.app Method.
Click to expand...
Click to collapse
I have downloaded the firmware and extracted. I cant open the update.app Do i transfer this to my phone or something? sorry for my inexperience
UhmierSmith said:
I have downloaded the firmware and extracted. I cant open the update.app Do i transfer this to my phone or something? sorry for my inexperience
Click to expand...
Click to collapse
make a folder name dload in your root of external sdcard. copy update.app in externalsdcard/dload folder. poweroff the phone. press vol+vol-power together untill setup starts. (release power after huawei logo continue pressing vol+ - Untill Setup starts)
Hi, I installed the ROM and GoogleApps followed. After the install ROM I realize that the 3G, 2G mobile networks doesn't work. Is there any solution for this issue?
cm-11-20140807-UNOFFICIAL-codina.zip
PA-GOOGLE APPS (All ROM's) [2014-09-01]
Change system/lib/tee folder with this from stock JB ROM for your codina version, change right permissions like was before and reboot phone.
PolishVodka said:
Change system/lib/tee folder with this from stock JB ROM for your codina version, change right permissions like was before and reboot phone.
Click to expand...
Click to collapse
I changed latest codina version's lib/tee folder from cm-11-20140520-UNOFFICIAL-codina which is older version. Then i installed ROM again but It doesn't solve the problem. Where can I change the permisions. When i installed the same ROM's before, there was not this issues occured before. By the way when I installed again, I tried wipe/reset factory, wipe cache, wipe dalvik cache and then install again.
mrcyborg said:
I changed latest codina version's lib/tee folder from cm-11-20140520-UNOFFICIAL-codina which is older version. Then i installed ROM again but It doesn't solve the problem. Where can I change the permisions. When i installed the same ROM's before, there was not this issues occured before. By the way when I installed again, I tried wipe/reset factory, wipe cache, wipe dalvik cache and then install again.
Click to expand...
Click to collapse
P.V. said stock jb... -.-
mrcyborg said:
I changed latest codina version's lib/tee folder from cm-11-20140520-UNOFFICIAL-codina which is older version. Then i installed ROM again but It doesn't solve the problem. Where can I change the permisions. When i installed the same ROM's before, there was not this issues occured before. By the way when I installed again, I tried wipe/reset factory, wipe cache, wipe dalvik cache and then install again.
Click to expand...
Click to collapse
Like I said, you need "tee" folder from stock JB for your GT-I8160 ver. And you can swap this folder directly in ROM Zip's archive (via 7zip or something on windows), remove current "tee" folder and put yours in the same place and don't care about permissions.
Files in "tee" folder are modem (RIL) parts, different for GT-I8160/L/N/P variants of Ace 2. Defaults are for GT-I8160 in every custom ROM and cannot be used the same for other codina variants (modem unknown).
I have a similar problem. I installed cyanogenmod 11 from TeamCajinca http://forum.xda-developers.com/showthread.php?t=2555021 and mobile data is very slow. After many trials and failures I managed to create an APN that works, but the internet speed is very slow compared with the stock android: only 2-3mbps. Does anybody knows the correct cyanogenmod 11 APN for Vodafone Romania or some other settings?
PolishVodka said:
Like I said, you need "tee" folder from stock JB for your GT-I8160 ver. And you can swap this folder directly in ROM Zip's archive (via 7zip or something on windows), remove current "tee" folder and put yours in the same place and don't care about permissions.
Files in "tee" folder are modem (RIL) parts, different for GT-I8160/L/N/P variants of Ace 2. Defaults are for GT-I8160 in every custom ROM and cannot be used the same for other codina variants (modem unknown).
Click to expand...
Click to collapse
But I can't find stock JB ROM. I downloaded the JB ROM but there is I8160XXMH1_I8160OJVMH1_HOME.tar.md5 file in inside the zip. How can I find the lib/tee folder for JB? There is lib/tee folder in codina but not available on my downloaded JB.
mrcyborg said:
But I can't find stock JB ROM. I downloaded the JB ROM but there is I8160XXMH1_I8160OJVMH1_HOME.tar.md5 file in inside the zip. How can I find the lib/tee folder for JB? There is lib/tee folder in codina but not available on my downloaded JB.
Click to expand...
Click to collapse
I think kyrillos provided a tee folder in his rom thread..(fast n lite)
teddytsen said:
I think kyrillos provided a tee folder in his rom thread..(fast n lite)
Click to expand...
Click to collapse
I tried kyrillos i changed tee folder's inside it doesn't work. I think approach is not a solution. Because I installed 3 version of codina before but the same ROM's doesn't works 3G. When the Works before doesn't work now
i turned back to Jellybean offical rom. I installed it with odin but 3G and 2G mobile network issue continues.
mrcyborg said:
i turned back to Jellybean offical rom. I installed it with odin but 3G and 2G mobile network issue continues.
Click to expand...
Click to collapse
What is the name of the .md5 file?
Same problem here
Guys, I've got the same problem - after installing Cyanogen 10.2 by TeamCanjica my phone's GSM module doesn't work. It can see a data provider name from sim-card, but cannot find any network (says "no signal").
I've tried installing CM10.1 and CM 11 - all the same, no GSM/3G signal.
My radio module firmware (as shown on phone) is I8160XXLL2.
After reading this thread I have two questions:
1) (the silly one) can this broblem be caused by installing clockworkmod recovery?
2) (the main one) where can I download stock JB ROM for my phone? I tried to get it from here (only found ROM for I8160XXMG2 for Russia): http://forum.xda-developers.com/showthread.php?t=2340849, but the download link is broken.
Hope we'll find a solution
Alex
I downloaded the firware from here:
http://samsung-updates.com/device/?id=GT-I8160
TUR version I8160XXMH1 is that I installed.
Doppler__Effect said:
1) (the silly one) can this broblem be caused by installing clockworkmod recovery?
Click to expand...
Click to collapse
No - The mistake was to flash CM over GB ROM (XXLL2)
Doppler__Effect said:
2) (the main one) where can I download stock JB ROM for my phone? I tried to get it from here (only found ROM for I8160XXMG2 for Russia): http://forum.xda-developers.com/showthread.php?t=2340849, but the download link is broken.
Click to expand...
Click to collapse
Search for file: I8160XXMG2_I8160OXEMG2_SER.zip in google - This is the latest JB FW for SER (russia)
Is your Phone a SER Version?? Or from which country? EDIT Saw a bit late that you already found were to DL FWs
But before you proceed I recommend to flash your Phone with 3-parted SER GB FW to eliminate any wrong remainders.
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
fluffi444 said:
Search for file: I8160XXMG2_I8160OXEMG2_SER.zip in google
...
But before you proceed I recommend to flash your Phone with 3-parted SER GB FW to eliminate any wrong remainders.
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
Click to expand...
Click to collapse
I've got a I8160XXMG2_I8160QXEMG2_HOME.tar.md5 file (it comes in a zip archive with an SS_DL.dll). Will it fit?
And, speaking in other words, I should now install (or flash) a GB ROM, then stock JB and only after that CM_any_version_i_like?
Or better should i flash to GB, then to CM and replace files as said in this thread (modem driver files)?
Thanks!
P.S.
I haven't been on any forums since year 2007. And going back - this is amazing!!!
Doppler__Effect said:
I've got a I8160XXMG2_I8160QXEMG2_HOME.tar.md5 file (it comes in a zip archive with an SS_DL.dll). Will it fit?
Click to expand...
Click to collapse
Yes, this FW looks OK
This DLL is useless...But it comes with every oringial FW
Doppler__Effect said:
And, speaking in other words, I should now install (or flash) a GB ROM, then stock JB and only after that CM_any_version_i_like?
Click to expand...
Click to collapse
exactly! Use 3-parted SER GB FW with ODIN (my link) to bring your Phone back to orignial status - Then your JB FW (with ODIN) - then CM you like
Doppler__Effect said:
Or better should i flash to GB, then to CM and replace files as said in this thread (modem driver files)?
Thanks!
Click to expand...
Click to collapse
NO - Do never flash CM over GB! I do not nean this modem_FS issue... I linked to the 3-Parted FW post of mine...
fluffi444 said:
Yes, this FW looks OK.
Click to expand...
Click to collapse
That was laFleur... laughed hard!!!!
Nevertheless, everything's fine now
I've already did everything (CM --> JB Stock --> CM. Tried it without 3rd part GB) and my radio module is UP AND RUNNING with CM11!!!! (I came to thought that I shouldn't flash CM over GB a few minutes after my previous post )
Thank you very-very much!!!
mrcyborg said:
I downloaded the firware from here:
http://samsung-updates.com/device/?id=GT-I8160
TUR version I8160XXMH1 is that I installed.
Click to expand...
Click to collapse
What is your device model no.
teddytsen said:
What is your device model no.
Click to expand...
Click to collapse
GT-I8160 (Samsung Ace 2)
I still have problem please help. 3G mobile network doesn't connect the internet
I have downloaded the lollipop update in which dlpkgfile is download along with few other, as I have goggled and searched so I know that dlpkgfile is a zip file but when I am trying to open with winrar or 7zip it return a error and I am not able to open it.
Can any one help me with it?
Where do you got that from ?
Maybe it's better to start with a KDZ and extract it if you want to mess with it.
raptor2003 said:
Where do you got that from ?
Maybe it's better to start with a KDZ and extract it if you want to mess with it.
Click to expand...
Click to collapse
When I download lollipop update that file is present in cache
And what to you want to do with it? It's not a full rom, it's just an update.
raptor2003 said:
And what to you want to do with it? It's not a full rom, it's just an update.
Click to expand...
Click to collapse
I know it is just a update but with in that file stock recovery and stock boot.img is present with some other useful data
DISCLAIMER:
I am not responsible for bricked devices or any damage caused for your device.
Click to expand...
Click to collapse
UPDATE
Created a Prerooted zip using Customized India FTF.
Download :
Pre-rooted zip: Pre-rooted Customized India zip
Note: There is no need of stripped FTF for customized India zip.
Instructions:
1. Copy the Zip to your external SD card.
2. Go to Recovery, Full wipe.
3. Flash the Zip and reboot. Note: it may take 5 to 7 minutes to boot into the system.
4. Done! you now have a rooted Lollipop with dual recovery.
*******************************************************************************************************************************************************************
Download Official Stock FTF (Customized IN) :
Official Stock Customized India FTF - untouched
*******************************************************************************************************************************************************************
I have created a Pre-rooted Zip using Generic LAM FTF and Stripped FTF.
Prerequisite :
Rooted KitKat with recovery installed.
Download :
Pre-rooted zip: https://mega.co.nz/#!3JRhnSZQ!86gRGenhLUJVM4sjW5nDjjoaHlwaSuvxdbOmVUwTr0U
Stripped FTF: https://mega.co.nz/#!HIQyyKyT!h1GYz700s2rPz8UmhQhibMyToR0eXZkAQqkHwHRUvaw
Pre-rooted zip (Google drive link) : https://drive.google.com/file/d/0B1MyAeBI7PaGREQ3NkRKNHYzSFk/view?usp=sharing
Instructions:
1. Copy the Zip to your external SD card.
2. Go to Recovery, Full wipe.
3. Flash the Zip and Power off the phone without booting into the system.
4. Open Flashtool and Connect your Phone to your computer, while pressing the Volume down button to go into flashmode. Flash the Stripped FTF using Flashtool.
5. Turn on the Phone and wait for it to complete boot. Note: it may take 5 to 7 minutes to boot into the system.
Happy Lollipop!
Screenshots:
Thankz
Download now
Booted and works so far. Restoring apps with tiatnium now and gonna see about setting everything else back up again. Thank you good sir.
Dood you are awesome...thanks for doing this
Could it be possibly to make an C6909 USA generic pre rooted? as I dont know another method to root actually lollipop
thanks in advanced
Can you make a kernel flashable ? Because I dont have pc now (
Can someone upload this to drive (google). Having troubles with Mega
Which region is LAM? Can I flash this in India or will I have issues?
noob_user_ said:
Can someone upload this to drive (google). Having troubles with Mega
Click to expand...
Click to collapse
+1 The Stripped FTF downloaded just fine, but having problems with Pre-rooted zip
Request
Can OP post the Download in XDA server if possible as it supports Torrents coz my Download bandwidth is very low so.
jacker60 said:
Could it be possibly to make an C6909 USA generic pre rooted? as I dont know another method to root actually lollipop
thanks in advanced
Click to expand...
Click to collapse
Sorry, I'm out of bandwidth. If you wish I can provide you the steps.
Which region is LAM? Can I flash this in India or will I have issues?
Click to expand...
Click to collapse
LAM is Latin America and yes you can flash this for India, no issues. I'm from India and using it on my phone right now.
Can you make a kernel flashable ? Because I dont have pc now (
Click to expand...
Click to collapse
Sorry, I don't how to
Can someone upload this to drive (google). Having troubles with Mega
Click to expand...
Click to collapse
Can OP post the Download in XDA server if possible as it supports Torrents coz my Download bandwidth is very low so.
Click to expand...
Click to collapse
Uploading now
Awesome!!!!!
session20 said:
Sorry, I'm out of bandwidth. If you wish I can provide you the steps.
LAM is Latin America and yes you can flash this for India, no issues. I'm from India and using it on my phone right now.
Sorry, I don't how to
Uploading now
Click to expand...
Click to collapse
Thanks bro
Abhishek_DK said:
Thanks bro
Click to expand...
Click to collapse
Just created a torrent, it says 100% seeding. Is it correct?
hello
i want to install this official stock firmware genric lam pre-rooted.i want to know how to install cwm/twrp recovery after flashing 14.5.A.0.242 Official Stock Lollipop Gerenic LAM Pre-Rooted Zip.can u please provide the procedure?
session20 said:
Just created a torrent, it says 100% seeding. Is it correct?
Click to expand...
Click to collapse
hitesh1792 said:
i want to install this official stock firmware genric lam pre-rooted.i want to know how to install cwm/twrp recovery after flashing 14.5.A.0.242 Official Stock Lollipop Gerenic LAM Pre-Rooted Zip.can u please provide the procedure?
Click to expand...
Click to collapse
You do not to install the recovery after flashing this, Recovery is pre-installed in the zip.
You just need to be on rooted KK with recovery and follow the instructions from the OP. After flashing, you will have pre-rooted LP firmware with dual recovery installed.
thanks man!
cool
session20 said:
You do not to install the recovery after flashing this, Recovery is pre-installed in the zip.
You just need to be on rooted KK with recovery and follow the instructions from the OP. After flashing, you will have pre-rooted LP firmware with dual recovery installed.
Click to expand...
Click to collapse
What does the Stripped FTF do?
can i flash without doing the stripped ftf?
session20 said:
Just created a torrent, it says 100% seeding. Is it correct?
Click to expand...
Click to collapse
Not sure bro.... Did you upload on XDA Server. Coz I don't Download Tab Enabled in the Thread
winningarrow said:
What does the Stripped FTF do?
can i flash without doing the stripped ftf?
Click to expand...
Click to collapse
Those are the files which are not included in the Zip, Stripped FTF is important to flash after the Zip.
Abhishek_DK said:
Not sure bro.... Did you upload on XDA Server. Coz I don't Download Tab Enabled in the Thread
Click to expand...
Click to collapse
Can you try downloading now using a torrent client. I used Utorrent application to create the torrent.