Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
xboarder said:
Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
Click to expand...
Click to collapse
there should be a tar file in the zip just unzip the file you downloaded
jerrycoffman45 said:
there should be a tar file in the zip just unzip the file you downloaded
Click to expand...
Click to collapse
There are only 2 files in the zip file.
KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
SS_DL.dll
Thanks for replying.
Can I flash the md5 file with ODIN? What's the purpose for the dll then?
xboarder said:
]KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
Click to expand...
Click to collapse
^^^ This is what you want to use in the PDA section. You can ignore the DLL.
Yeah just flash the md5 file in odin as PDA. I have no idea what the dll file is for
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I just flashed the .md5 with ODIN, and it's working great.
Thanks to all of you for your quick response and help. Very much appreciated.
Related
So I was looking at this you tube video here:http://www.youtube.com/watch?v=BTcslgE0RK4 and everything seems relatively easy except I go to dl the firmware Here:http://www.sammobile.com/firmware/ for my friends note 2 and I don't see a dl for USA or anything close to it. My question is which firmware do I dl? Thanks in advance!
http://forum.xda-developers.com/showthread.php?t=1968136
Just to clarify, I can use the aforementioned info in the link to un root the galaxy note II?
I "believe" that its the stock ROM untouched, no root no busy box no custom boot loader.
It will put your Note 2 back to the way it was when you first got it.
* If your uncertain then PM the OP of the post for confirmation.
Itchiee said:
I "believe" that its the stock ROM untouched, no root no busy box no custom boot loader.
It will put your Note 2 back to the way it was when you first got it.
* If your uncertain then PM the OP of the post for confirmation.
Click to expand...
Click to collapse
I followed the instructions in the link you had and when i go into odin and click pda it goes to the folder i downloaded the stock tar(which by the way is a zip folder called samsung updates which i thought was weird) but i dont see a stock tar and on my pc it wont let me extract the zip file....
GSIII Rooted Stock #SPURNATION
Inside the the zip file you downloaded should be a file that ends in .tar or .tar.md5 that is used in Odin.
If your not sure what you are doing you may want to brush up on the process first.
Homework - AKA How to Fix Your Situation
Itchiee said:
Inside the the zip file you downloaded should be a file that ends in .tar or .tar.md5 that is used in Odin.
If your not sure what you are doing you may want to brush up on the process first.
Homework - AKA How to Fix Your Situation
Click to expand...
Click to collapse
I must have gotten a hiccup in my first dl. I 're downloaded and followed instructions and achieved unroot! I'm an HTC dude coming over to samsung so it'll take some getting use to
GSIII Rooted Stock #SPURNATION
Hello,
So I finally flashed my first ROM, Clean Rom 3.5. Then I started reading about a new, today, modem zip file. I guess I need to install it. I have it on my phone in both a zip file and then I extracted it and have it in the phone as a bin files additionally. I am a noob at this stuff. I have mobile odin pro but am not sure of the exact steps to correctly add this bin file. I also have TWRP if I need it.
Any help would be appreciated as I almost bricked my phone this morning and it has been very hectic around here with the sick kids. Thanks
Can u make phone calls? If u can u dont need to flash modem.....only reason to flash modem is if ur getting no connection..but im assuming u do so dont flash
Sent from my SAMSUNG-SGH-I317 using xda premium
livingaboard said:
Hello,
So I finally flashed my first ROM, Clean Rom 3.5. Then I started reading about a new, today, modem zip file. I guess I need to install it. I have it on my phone in both a zip file and then I extracted it and have it in the phone as a bin files additionally. I am a noob at this stuff. I have mobile odin pro but am not sure of the exact steps to correctly add this bin file. I also have TWRP if I need it.
Any help would be appreciated as I almost bricked my phone this morning and it has been very hectic around here with the sick kids. Thanks
Click to expand...
Click to collapse
i suggest slowing down and reading to understand what you're doing. not trying to be a smarta$$, just trying to be helpful. if you downloaded the modem file in a zip format (e.g., like the one on Scott's website), then read the post that provided the link to confirm how the modem should be installed. if you downloaded the ATT modem from Scott's website then you should be able to flash it like you would his 3.5 ROM. also, i read another post where you were looking for the latest ATT OTA; if you haven't done so already, then search the development section for Scott's release of a the newest stock, ATT TWRP flashable ROM.
again, just offering some helpful advice... take your time and enjoy your device.
Hello all. I have posted this problem/question before but received no help. So im posting it again. I recently rooted my S3 and installed cyanogenmod and decided I like touchwiz so I decided to unroot it. So I installed triangle away to delete any traces of root and the process was completed nicely. Then I flashed a stock rom that I downloaded online. Then I did a stock factory reset. But it doesnt feel right. There are slight graphics glitches with opening some apps. Like opening facebook messanger will display white and black lines untill it loads up. I tried the whole reinstall thing and no help. There are other similar glitches. Can anyone help me? I want my s3 fully stock like it was straight from att.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
dima470 said:
Then I flashed a stock rom that I downloaded online.
Click to expand...
Click to collapse
I would try another file download location (which you did not specify where you downloaded from). You might also try and redownload and ensure to do an MD5 check. Of course this means factory resetting again and ODIN.
If nothing else, download rooted ROM from Mr.Robinson's post and unroot it. This will keep your flash counter as is.
aybarrap1 said:
I would try another file download location (which you did not specify where you downloaded from). You might also try and redownload and ensure to do an MD5 check. Of course this means factory resetting again and ODIN.
If nothing else, download rooted ROM from Mr.Robinson's post and unroot it. This will keep your flash counter as is.
Click to expand...
Click to collapse
Thank You for your quick responce. I downloaded the rom from a video i found on YouTube.(doesn't seem reliable huh...) How do i do an MD5 check?
dima470 said:
Thank You for your quick responce. I downloaded the rom from a video i found on YouTube.(doesn't seem reliable huh...) How do i do an MD5 check?
Click to expand...
Click to collapse
Follow this thread for downloading stock roms: http://forum.xda-developers.com/showthread.php?t=1968625. After unzipping most should end with the file name .md5. ODIN will do the md5 check automatically for you. Just pay attention to the prompts.
If you find that this does not work, go here and download rooted rom to be flashed via ODIN. You can then remove root.
If the file is not ODIN flashable with an md5 at the end, look for a long string of digits and letters that should be right by the download. A good example to know what I am talking about is to take a look at the site for rooted stock roms. Notice the md5 under the Old image AT&T file download link. Download and extract this file and follow the directions.
aybarrap1 said:
Follow this thread for downloading stock roms: http://forum.xda-developers.com/showthread.php?t=1968625. After unzipping most should end with the file name .md5. ODIN will do the md5 check automatically for you. Just pay attention to the prompts.
If you find that this does not work, go here and download rooted rom to be flashed via ODIN. You can then remove root.
If the file is not ODIN flashable with an md5 at the end, look for a long string of digits and letters that should be right by the download. A good example to know what I am talking about is to take a look at the site for rooted stock roms. Notice the md5 under the Old image AT&T file download link. Download and extract this file and follow the directions.
Click to expand...
Click to collapse
I tried Mr. Robinson's rooted stock rom, and it has the exact same issue.... Is it all just in my head? Please do help. My S3 isn't perfect anymore and i'm really OCD about it. I regret ever rooting.
I'm trying to flash back to the Stock firmware with TWRP. I have the zip file on my SD card but when I try to flash it is reporting that it is unable to open the zip. I confirmed that the file is downloaded correctly and not corrupt as I am able to access/extract it on my PC without issue. Any ideas on how to get past this?
Its probobly an ODIN zip not a CWM zip. Extract the zip and if it has a .pda in it then you have to use ODIN on your PC
mrevankyle said:
Its probobly an ODIN zip not a CWM zip. Extract the zip and if it has a .pda in it then you have to use ODIN on your PC
Click to expand...
Click to collapse
It has an md5 in it...
danmanca said:
It has an md5 in it...
Click to expand...
Click to collapse
An MD5 is just an integrity check file. What is the name of the zip and where did you get it?
mrevankyle said:
An MD5 is just an integrity check file. What is the name of the zip and where did you get it?
Click to expand...
Click to collapse
The name of the Zip file is
SGH-I317_ATT_I317UCAMA4_I317ATTAMA4.zip
I downloaded it from a couple locations that listed it as the stock AT&T firmware for this phone. Each location same error.
danmanca said:
The name of the Zip file is
SGH-I317_ATT_I317UCAMA4_I317ATTAMA4.zip
I downloaded it from a couple locations that listed it as the stock AT&T firmware for this phone. Each location same error.
Click to expand...
Click to collapse
Im pretty sure that the one you downloaded is just zipped factory firmware and not flashable zip. You will need to extract tar file inside if there is one and flash Via Odin. If you are using it for att there is one that you can flash via twrp from link below.
http://forum.xda-developers.com/showthread.php?t=2274854
Sent from my SGH-I317M
Ah thanks for the help, I think thats my problem. Testing with the link you provided. Thanks.
I wonder why we see a lot of people asking questions here about install errors from files they got at some random (and often unheard of) sites around the Internet? Don't people know that xda has all the files they could need?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Hey guys, I know a lot of us has been stuck with paper weights since we messed up flashing our phones thinking the L710 and L710t were the same... sooo, if you lost your imei and baseband unkown and no network and no audio and all these issues and just want to go back to stock.. you've come to the right place.
Remember this is for the sprint sph l710T .... note the T for triband lol
Step 1. Download Odin (search google)
Step 2. .tar file from here (https://mega.co.nz/#!cBBDEBpJ!t5IAcCaMg2w7GDI0zhhmZw0e7jh0Uv0v4gJpsH8gb6o)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
step 3. put your phone in download mode... flash that shiiiiii, be patient and profit!
youre very welcome
BIIIGGGGG THANKS TO THESE GUYS FROM ANDROID FORUMS
Kdude63 for the link
the_dumbest_noob for actually pulling the .tar for kies to save our behinds!
yep i can verify i had to get this version cause the charging port on my phone died and according to the site it came from it should work across the board with Sprint, Boost, and Virgin Sph-L710T
I made a flashable zip that De-Odex the stock rom https://www.androidfilehost.com/?fid=95832962473400340 check it out if you want but read the description
Great news, thanks to all who made this happen!
I'm a novice at this, If I flash this .tar my phone will no longer be rooted, correct?
TujungaGuy said:
Great news, thanks to all who made this happen!
I'm a novice at this, If I flash this .tar my phone will no longer be rooted, correct?
Click to expand...
Click to collapse
if you flash the stock tar that is provided it will erase your entire phone except for the external storage and then replace it all with whats inside of it including your recovery
6th_Hokage said:
if you flash the stock tar that is provided it will erase your entire phone except for the external storage and then replace it all with whats inside of it including your recovery
Click to expand...
Click to collapse
I see, thanks! What then would be the benefit of flashing the deodex zip posted above? Will that allow me to uninstall bloatware? What's the purpose?
TujungaGuy said:
I see, thanks! What then would be the benefit of flashing the deodex zip posted above? Will that allow me to uninstall bloatware? What's the purpose?
Click to expand...
Click to collapse
De-Odex helps for themeing and swapping out system apps that aren't from Google.....like if you want a updated Samsung app like the music player for instance
6th_Hokage said:
De-Odex helps for themeing and swapping out system apps that aren't from Google.....like if you want a updated Samsung app like the music player for instance
Click to expand...
Click to collapse
Copy that. Out of curiosity, it appears most people need this .tar because they lost their baseband / modems after installing a different rom. Wouldn't it be easier to just flash the L710T NF4 modem firmware? I downloaded it and was going to try it with a few roms that were messing with my baseband. Thoughts?
TujungaGuy said:
Copy that. Out of curiosity, it appears most people need this .tar because they lost their baseband / modems after installing a different rom. Wouldn't it be easier to just flash the L710T NF4 modem firmware? I downloaded it and was going to try it with a few roms that were messing with my baseband. Thoughts?
Click to expand...
Click to collapse
that file basically just puts the right files in on your SD card which then can be used in PhilZ via custom restore i believe....let me check into that
Will this work for SPH-L710T on Virgin Mobile?
Because this happened to my friend on her's: http://androidforums.com/threads/sph-710t-deleted-google-play-services.887991/
TLR=She deleted Google Play Services and her phone is all kinds of screwed up, factory reset didn't help the phone refresh the system file on its own, so either I need the stock .tar OR someone to upload me their Google Play Services system app (my Stratosphere II's usually works once but I think Google Play tries to update it and it fails and then all the problems start again)
iviyth0s said:
Will this work for SPH-L710T on Virgin Mobile?
Because this happened to my friend on her's: http://androidforums.com/threads/sph-710t-deleted-google-play-services.887991/
TLR=She deleted Google Play Services and her phone is all kinds of screwed up, factory reset didn't help the phone refresh the system file on its own, so either I need the stock .tar OR someone to upload me their Google Play Services system app (my Stratosphere II's usually works once but I think Google Play tries to update it and it fails and then all the problems start again)
Click to expand...
Click to collapse
yes or at least should work on sprint,boost and virgin
6th_Hokage said:
yes or at least should work on sprint,boost and virgin
Click to expand...
Click to collapse
So her phone wouldn't get screwed up with any kind of modem/network setting incompatibility because she's a Virgin Mobile subscriber and this was pulled from a Sprint L710T would it?
iviyth0s said:
So her phone wouldn't get screwed up with any kind of modem/network setting incompatibility because she's a Virgin Mobile subscriber and this was pulled from a Sprint L710T would it?
Click to expand...
Click to collapse
correct it won't get screwed up
the one custom rom that will boot without the need for stock kernel is Conquest Singularity link https://www.androidfilehost.com/?w=files&flid=15185 currently im running the Conquest-Singularity-10-beta9-Full.zip with the Conquest-Singularity-10-b10-update.zip everything seems to work fine except for the rotation but someone over at android forums says Conquest-Singularity-9-Full.zip by it self works including rotation he never mentioned the Conquest-Singularity-9.5-Update.zip so that's basically it to figure out how to install this amazing rom go to the Closed OP here http://forum.xda-developers.com/showthread.php?t=2774902
dcutz said:
Step 1. Download Odin (search google)
Step 2. .tar file from here (link)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
Click to expand...
Click to collapse
or the AP slot for Odin 3.09+
(you might want to add that to the OP)
THANK YOU, her phone is back to normal and it even kept her model intact!
And now I backed up her phone (Titanium and Nandroid) right this time (to SD not internal)
flash this kernel after you flash Conquest so rotation gets fixed https://www.dropbox.com/sh/5y5w6clj...T747-TW-KK-4.4-ATT-05-13-2014 kernel.zip?dl=0
You sir, have fixed my phone.
THANK YOU SOOOOOO MUCH! It actually worked! After 2 weeks of searching, this thing actually worked! I will definitely recommend this page to anyone who has the same problem.
dcutz said:
Hey guys, I know a lot of us has been stuck with paper weights since we messed up flashing our phones thinking the L710 and L710t were the same... sooo, if you lost your imei and baseband unkown and no network and no audio and all these issues and just want to go back to stock.. you've come to the right place.
Remember this is for the sprint sph l710T .... note the T for triband lol
Step 1. Download Odin (search google)
Step 2. .tar file from here (https://mega.co.nz/#!cBBDEBpJ!t5IAcCaMg2w7GDI0zhhmZw0e7jh0Uv0v4gJpsH8gb6o)
put this in to odin in the pda section (note: if the file gives an md5 mismatch of some sort, remove (.md5) from the extension to leave the .tar)
step 3. put your phone in download mode... flash that shiiiiii, be patient and profit!
youre very welcome
BIIIGGGGG THANKS TO THESE GUYS FROM ANDROID FORUMS
Kdude63 for the link
the_dumbest_noob for actually pulling the .tar for kies to save our behinds!
Click to expand...
Click to collapse
Do you still have this TAR available? The mega.co.nz link says the file is not available. I am in this exact same predicament where I thought this phone was the same as the L710 and now... I can't get anything I try to work. Always stuck in a boot-loop and I've tried a couple ROMs. I also can't seem to find a Stock ROM anywhere!
zentsang said:
Do you still have this TAR available? The mega.co.nz link says the file is not available. I am in this exact same predicament where I thought this phone was the same as the L710 and now... I can't get anything I try to work. Always stuck in a boot-loop and I've tried a couple ROMs. I also can't seem to find a Stock ROM anywhere!
Click to expand...
Click to collapse
I hate bumping an old thread, but in this case, I'm in the same predicament after flashing an OS and not having a way to update the PRL and such. The L710T TAR would be greatly appreciated.