Develop Bugs

[Q] Partition SD

Hi guys
I have root my phone and install
clockwork mode recovery 2.5.1.8
&
LeeDroid ROM file named "LeeDrOiD_V2.5.0_A2SD_FINAL.zip"
and all of this work perfect .
then i open rom manger because i want to partition my 8GB sd
after i flash my recovery i select
partition SD (Ext size 512M) & (Swap size 32M) then it go to recovery
and i have this error "please open rom manager to report the issue"
and i re partition sd by rom manger and i have seam error
after this i let Rom Manger behind me and i go to recovery
Advance>partition SD card>2028M>32M .. .. ..
after done i open the system>Sitting>SD&phone storge
SD total space is 6GB 8-2 for partition=6
Total internal phone storage is 186M in "Disk Usage"App
but i but 2GB partition !!!
i but 4GB partition to check ... same proplime 186M
i hear some people seas install "Data2SDInstallerX1" i try it but after i install it
when i turn my phone on its hold in htc logo
now i re install Lee Droid rom and the rom is work, but partition proplime steel here
pls i need help

Hi did you try redo it with gparted? or flash better recovery to setup partitions on your sd card... some rom are not showing all space from ext partition... BTW why you have swap? instruction saying 0 MB for swap

Its working correctly, the 183Mb free space will decrease slowly but it is using the 2Gb ext partition for app storage. Also, you don't need a swap partition. My advice is to start again, either do a backup, repartition your SD card with 1Gb ext and 0 swap and then restore or just do the partitioning and flash the ROM from scratch.

raikesy said:
Its working correctly, the 183Mb free space will decrease slowly but it is using the 2Gb ext partition for app storage. Also, you don't need a swap partition. My advice is to start again, either do a backup, repartition your SD card with 1Gb ext and 0 swap and then restore or just do the partitioning and flash the ROM from scratch.
Click to expand...
Click to collapse
it need 1GB or i can but it 2GB for the partition

rmnattas said:
it need 1GB or i can but it 2GB for the partition
Click to expand...
Click to collapse
Excuse me, what?

MatDrOiD said:
Excuse me, what?
Click to expand...
Click to collapse
I think he meant : Can it be 2 GB for sd-ext partition and rest from 1st post... no clue what he is about

i have another Q
does i need to install data2ext or a2sd rom ????

First answer my question, then I answer your question.

some one tell me to partition sd card 1GB and swap 0M and i ask him can i use 2 GB or i can only but 1GB

does i need to install data2ext or a2sd rom ????

If you constantly ignore what we are telling, you won't get any answer any more.

how to use data2sd....??

Frndzzzz,
Am using HTC wildfire S,
Android -2.3.5
Sense -3.5
Software number -EQDKP v5.0
Built number - GingerBurst Data2Sd X12E Droidzone..
Tell me how to use this data2sd....
Tell how to increase my internal memory by using this app....
Thanks in advance...

You must have second partition (ext2,3,4) on your sdcard. There is link how to make it http://forum.xda-developers.com/wiki/SD_card_partitioning. What ext partition you select that must be from your rom. I am using ext4. GL with partitioning

Partition ur SD card in CWM or using Minitool Partition Wizard In PC. (To create an EXT partition)
Then Install Data2SD DroidZone if Ur Rom does Not have the Data2SD preintgrated.
Thats alll........

Running data2sd in cm 10

Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!

rajatmendus said:
Hey guys, I recently flashed benjamingwynn's cm 10. I really liked the rom but the rom takes up a lot of space. My internal memory is very low, so even if I use link2sd I was only able to install some apps. Then I tried data2sd from the market. I created a storage file but when I try to mount it, there's nothing happening. Is there any way to make data2sd working? Should I follow any other steps?
Thanks in advance!
Click to expand...
Click to collapse
Data2sd from market? lol.
Data2sd is a script which is only flashed by installing from recovery or rom manager... Get cronmod int2ext+ script and flash it from recovery. It works pretty well.

I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.

Pr3no said:
I can only repeat sukhjit321, you have to flash it in recovery.
Download this: http://www.mediafire.com/?t1r06j60gybhn2t
Put it on your SD card, then install it from recovery just like a rom (delete cache partition and dalvik cache before).
Or try int2ext+ or something else, but you have to flash all of them in the recovery.
Click to expand...
Click to collapse
Should i create a partition my sd card before flashing?

rajatmendus said:
Should i create a partition my sd card before flashing?
Click to expand...
Click to collapse
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)

Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
actually i thing 2048mb is the last stable bit

Data 2SD on CM10
Pr3no said:
Yes, first make a FAT32 partition, and then an ext4 partition (the ext4 is going to be your internal memory, so make it as big as you want)
Click to expand...
Click to collapse
Hi....i have a Wildfire S working on CM10. Im facing the problems of Low internal memory too...I have tried usinbg Link2Sd but barely helps...again doomed for low internal memory...if i flash data2sd try int2ext+ or something else, i wud have to flash all of them in the recovery by going in recovery mode and the install from SD card..BUT do i have to wipe everything or what i mean to say is do i have to flash the CM10 all over again by deleting everything OR just flashing DATA2SD / int2ext+ wud help.
Beacuse while using Link 2Sd i have already created partiion EXT4 for about 3GB on my 8 GB SD card..
Please suggest how i must do the process ....
Regards ,
Piyush

no...don't flash data2s or int2ext or othe sceipt simultanuslly....lit will cause crash...and u can use your link2sd partition as 2 nd partition....but if after flashing int2ext+ your internal memory dont change and 150 mb than you have to make patition again...sad..
Sent from my Wildfire S A510e using xda premium

[Q] concept of int2ext

hey devs....plz tell me what is this int2ext and all that's update int2ext4,4+ .i think its about the storage in our phone...plz tell me or link me or some tutorial for that...//

denz! said:
hey devs....plz tell me what is this int2ext and all that's update int2ext4,4+ .i think its about the storage in our phone...plz tell me or link me or some tutorial for that...//
Click to expand...
Click to collapse
Already there are threads about this are here... anyway it is a script to increase internal storage by using second partition in sd card.... Its simple...
Download Int2ext+ (http://d-h.st/1vK)
Make a second partition in memory card using mini tool partition wizard... (Ext2 partition, as primary) you can create upto 2GB...
then flash the downloaded zip of int2ext+ on CWM... thats all...

[Q] a2sd not working properly

when i install custom rom and start a2sd script from terminal emulator its work but when i reboot my phone all installed apps gone and ext partition not showing.
pls help..

Could u post more info?
Rom, hboot, recovery?

More importantly how did you partition your sdcard?
Should be done only with 4EXT recovery or gparted, not clockworkmod or minitool

slim vj rom & bravo alphaspl sense hboot 180-40-217 hboot
SaySayonara said:
Could u post more info?
Rom, hboot, recovery?
Click to expand...
Click to collapse
i use slim vj rom & bravo alphaspl sense hboot 180mb system 40mb cache & 217mb data & 4ext recovery

i created ext4 partition with 4ext recovery
eddiehk6 said:
More importantly how did you partition your sdcard?
Should
i created a 512mb ext4 partition via 4ext recovery
Click to expand...
Click to collapse

ranjodhricky said:
eddiehk6 said:
More importantly how did you partition your sdcard?
Should
i created a 512mb ext4 partition via 4ext recovery
Click to expand...
Click to collapse
hmm strange you created it using the right recovery.
The ext partition won't show up in your internal memory (i.e. it won't read 217MB + 512MB) but the sd-ext should store your apps and dalvik if you activated with A2SD with Y N Y
However, 512MB is very small, if you have enough apps it will fill up quite quickly. I'd recommend:
- backup sd card
- repartition with maximum 2GB ext4 partition, no swap (1.5GB is enough normally)
- full wipe and reinstall ROM, activate A2SD
- restore apps
Check your partition is filling up with an app like 'DiskUsage'
Click to expand...
Click to collapse

Try mount2sd and then verify it is enabled by checking overview in titanium backup.
Tapatalked from tablet.

Mounts2SD doesn't work with 4.2.2. I tried it.. or maybe I didn't do it right.
It only worked on GB for me..
but instead of the
a2sd install y>n>y
I did
a2sd xdata
Works like a charm

i use only 10 to 15 apps
actully bro i used only some apps that used only 350mb space some time ext partition show in app manager but after rebooting its gone.
now i use Link2sd app & its working properly
Sorry for bad english & thanks bro.