Hello all,
I can't install my OTA update, it only shows the hboot screen (what you see when you hold power and vol. down)
I've done a CWM restore from a nandroid backup for HTC__E11 (my phone)
I've restored the Stock Recovery.img from a nandroid backup for HTC__E11 (my phone)
I've restored the Stock Boot.img from a nandroid backup for HTC__E11 (my phone)
I still can't install an OTA update (3.20.401.1)
How do i solve this ?
Mark
fietspompje said:
Hello all,
I can't install my OTA update, it only shows the hboot screen (what you see when you hold power and vol. down)
I've done a CWM restore from a nandroid backup for HTC__E11 (my phone)
I've restored the Stock Recovery.img from a nandroid backup for HTC__E11 (my phone)
I've restored the Stock Boot.img from a nandroid backup for HTC__E11 (my phone)
I still can't install an OTA update (3.20.401.1)
How do i solve this ?
Mark
Click to expand...
Click to collapse
did you get any OTA?
matt95 said:
did you get any OTA?
Click to expand...
Click to collapse
I get the notification there is one the (3.20.401.1 update), i'm comming from CM10 and wanted to go back to fully stock again.
A recovery.img inside a nandroid backup is never a Stock one. Its the custom one where the nandroid is made with !!!
Flash this one and try again
http://db.tt/pO3jumMa
Mr Hofs said:
A recovery.img inside a nandroid backup is never a Stock one. Its the custom one where the nandroid is made with !!!
Flash this one and try again
http://db.tt/pO3jumMa
Click to expand...
Click to collapse
Phone is rebooting and i'll keep you up to date!
-- Edit, phone keeps booting to the hboot screen
fietspompje said:
Phone is rebooting and i'll keep you up to date!
-- Edit, phone keeps booting to the hboot screen
Click to expand...
Click to collapse
Do everything all over again and flash the recovery linked above
matt95 said:
Do everything all over again and flash the recovery linked above
Click to expand...
Click to collapse
So i need to unlock my device again ? Well, ill keep you guys up to date
fietspompje said:
So i need to unlock my device again ? Well, ill keep you guys up to date
Click to expand...
Click to collapse
if you want to get that OTA your need to do it all over again
matt95 said:
if you want to get that OTA your need to do it all over again
Click to expand...
Click to collapse
I've unlocked my device again, installed CWM.
The following steps are:
1. Nandroid restore
2. boot.img flash
3. recovery.img flash (the on from the Dropbox link)
4. fastboot oem lock
Are these steps correct ?
fietspompje said:
I've unlocked my device again, installed CWM.
The following steps are:
1. Nandroid restore
2. boot.img flash
3. recovery.img flash (the on from the Dropbox link)
4. fastboot oem lock
Are these steps correct ?
Click to expand...
Click to collapse
no need to lock it
matt95 said:
no need to lock it
Click to expand...
Click to collapse
I've done it all, and it's running perfecto again and the OTA update installed fine! let's wait for the sense 5 update haha :good:
Case closed ! :d
Related
Recently unlocked my phone (OPTUS001) cid and trying to upgrade to JB I have rooted and installed ROM Manager and download various builds through the app but all failed I am running 2.17 Have tried going back to RUU_ENDEAVOR_U_ICS_40_Optus_AU_1.28.980.10_Radio_1.1204.103.14_release_258004_signed but fails, I fairly new to modding these phone but love my HTC one X could some please help (A Noobs version) on how to upgrade to JB
Thanks In Advance
I don't think you flashed the boot.img with fastboot commands, the rommanager doesn't work because we don't have S-off phones !
Now the problem, you are unlocked and you run a custom recovery ? and on wich hboot are you on at the moment ? Put the phone in bootloader menu and check also put the phone in fastboot USB menu and do the next fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Post the answers to my questions and the outcome from the commands here please !
Mr Hofs said:
I don't think you flashed the boot.img with fastboot commands, the rommanager doesn't work because we don't have S-off phones !
Now the problem, you are unlocked and you run a custom recovery ? and on wich hboot are you on at the moment ? Put the phone in bootloader menu and check also put the phone in fastboot USB menu and do the next fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Post the answers to my questions and the outcome from the commands here please !
Click to expand...
Click to collapse
version-main: 2.17.980.6
finished. total time: 0.031s
... INFODEBUG: cid: OPTUS001
OKAY [ 0.074s]
finished. total time: 0.075s
You can't run an RUU with a lower version than your current, go to the general section and find the collection of stock nanodroids thread and download the stock nanodroid for Optus001
same problem
I also HOX with cid : OPTUS001
I have already downloaded the OTA file .
can I flash it by fastboot??
or by using JBFWFlasher??
grudboy said:
I also HOX with cid : OPTUS001
I have already downloaded the OTA file .
can I flash it by fastboot??
or by using JBFWFlasher??
Click to expand...
Click to collapse
What ota file, are u on stock rom ? Stock kernel ? Stock recovery ? Give more info.....
---------- Post added at 08:12 AM ---------- Previous post was at 08:09 AM ----------
muttlie said:
version-main: 2.17.980.6
finished. total time: 0.031s
... INFODEBUG: cid: OPTUS001
OKAY [ 0.074s]
finished. total time: 0.075s
Click to expand...
Click to collapse
Download your matching nandroid from here
http://forum.xda-developers.com/showthread.php?t=1975140
Flash the boot.img from it and do a full wipe in recovery and then restore the nandroid !
After that flash back the stock recovery and you are ready to update :thumbup:
Mr Hofs said:
What ota file, are u on stock rom ? Stock kernel ? Stock recovery ? Give more info.....
---------- Post added at 08:12 AM ---------- Previous post was at 08:09 AM ----------
Download your matching nandroid from here
http://forum.xda-developers.com/showthread.php?t=1975140
Flash the boot.img from it and do a full wipe in recovery and then restore the nandroid !
After that flash back the stock recovery and you are ready to update :thumbup:
Click to expand...
Click to collapse
Just So I know what i'm doing before I do it
I have download matching nandriod rar format I extracted files
Contents are
.android_secure.vfat.tar
boot.img
cache.ext4.tar
data.ext4.tar
nandroid.md5
recovery.img
system.ext4.tar
with phone unlocked
do I do the following
fastboot flash boot boot.img
Wipe in recovery mode
then
fastboot flash recovery recovery.img
from the downloaded files
Your help is appreciated
You have to do this :
Make a folder on the sdcard
Sdcard\clockworkmod\backup\time and date folder of the backup that's in the rar file\all those backup files
Then you copy the boot.img from it to the fastboot folder on the pc
Then you boot into the bootloader and flash that boot.img
Then you boot back into recovery and do a full wipe except sdcard. Delete all caches, data system ....
Then you tap backup & restore and restore the nandroid backup
After that you boot the phone and check it works fine
After that you flash back the STOCK recovery (its not the one from the backup because the backup is done with a custom recovery !
Here is the stock recovery you need
http://db.tt/U5CK4noo
The last thing is to flash back this recovery and you are good to and update the phone with official JB
Mr Hofs said:
You have to do this :
Make a folder on the sdcard
Sdcard\clockworkmod\backup\time and date folder of the backup that's in the rar file\all those backup files
Then you copy the boot.img from it to the fastboot folder on the pc
Then you boot into the bootloader and flash that boot.img
Then you boot back into recovery and do a full wipe except sdcard. Delete all caches, data system ....
Then you tap backup & restore and restore the nandroid backup
After that you boot the phone and check it works fine
After that you flash back the STOCK recovery (its not the one from the backup because the backup is done with a custom recovery !
Here is the stock recovery you need
http://db.tt/U5CK4noo
The last thing is to flash back this recovery and you are good to and update the phone with official JB
Click to expand...
Click to collapse
Seem to work phone still working, went into software updates and updated to v4.0.475679
not how do I update to JB (sorry this is such a long winded process, still tiring to get the hang of all this)
muttlie said:
Seem to work phone still working, went into software updates and updated to v4.0.475679
not how do I update to JB (sorry this is such a long winded process, still tiring to get the hang of all this)
Click to expand...
Click to collapse
Phone won't let me install any apps downloaded to an error 921
Be more specific please, did u do a system update ? To what version 4.04 ? I dont understand your software update never seen such a number ??? And what about apps ...you mean apps in the playstore ?
And maybe your provider hasn't rolled out the update to JB yet, that's why you might not get it at the moment and have to wait for it
Mr Hofs said:
Be more specific please, did u do a system update ? To what version 4.04 ? I dont understand your software update never seen such a number ??? And what about apps ...you mean apps in the playstore ?
And maybe your provider hasn't rolled out the update to JB yet, that's why you might not get it at the moment and have to wait for it
Click to expand...
Click to collapse
Yes I do mean system update so I guess I have to wait, the PlayStore was fixed by remove my account and then readding
Thanks for all the help
One more quest if I reroot the Stock will it stop updates from working
Thanks again for all the help
muttlie said:
Yes I do mean system update so I guess I have to wait, the PlayStore was fixed by remove my account and then readding
Thanks for all the help
One more quest if I reroot the Stock will it stop updates from working
Thanks again for all the help
Click to expand...
Click to collapse
No rooting is no problem, you can also update with root active, just make sure you keep the rom stock (don't delete system apps) or if you flash the cwm recovery and then do a new nandroid backup from this rom you always have a 100% stock rom to go back to ! Always safe to do that , and copy the new nandroid to a computer or dropbox .... Always safe !
To update you need stock rom,recovery and boot.img ....
Mr Hofs said:
No rooting is no problem, you can also update with root active, just make sure you keep the rom stock (don't delete system apps) or if you flash the cwm recovery and then do a new nandroid backup from this rom you always have a 100% stock rom to go back to ! Always safe to do that , and copy the new nandroid to a computer or dropbox .... Always safe !
To update you need stock rom,recovery and boot.img ....
Click to expand...
Click to collapse
Tried to boot into recovery but now get a red triangle
Yes thats the stock recovery....its normal, if you want to enter the recovery after that you have to push volume down and power button to confirm.....if i recall it right.
Its volume + and power button
But the stock recovery is pretty much useless ....it doesn't have the features that a custom recovery has
Mr Hofs said:
Yes thats the stock recovery....its normal, if you want to enter the recovery after that you have to push volume down and power button to confirm.....if i recall it right.
Its volume + and power button
But the stock recovery is pretty much useless ....it doesn't have the features that a custom recovery has
Click to expand...
Click to collapse
Just goes to screen with picture of HTC one with a red triangle I was tiring to install root
Ah like that, i don't know about that. I never rooted the stock rom, i always flashed a custom, already rooted custom rom
Mr Hofs said:
Ah like that, i don't know about that. I never rooted the stock rom, i always flashed a custom, already rooted custom rom
Click to expand...
Click to collapse
Late xmas preseni from Optus my HTC is now upgraded to 4.1.1
how do I now go about root this version
Thanks again for the help
Actually unlocking,flashing,rooting is all the same for JB as it was for ICS roms
so the title says it all..ive done this before but i forget the command
anybody?
When i soft bricked my phone i run the RUU in fastboot and it worked fine.
you will need to relock your bootloader and have more than 30% battery.
Yes phone in bootloader / fastboot usb menu
Lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode and run the RUU WITH admin rights (right click the ruu to choose it)
so no stock recovery needed
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
Nope
luuranko3 said:
so no stock recovery needed
Click to expand...
Click to collapse
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
treebill said:
The rru. Flashes stock boot,recovery and system imgs all that's required is 30% or higher battery and a locked/relocked bootloader.
play tekkit? come join my server for some fun. 193.35.58.2:25575
Sent from venom injected one x
Click to expand...
Click to collapse
if you didint know that doesent work on jelly bean..still stuck on viper 3.2.1 the ruu thing doesent move help me please:crying:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Mr Hofs said:
Get yourself a ICS nandroid matching your MAIN VERSION number, restore it completely and flash back the matching stock recovery, then update manually to stock JB....again.
Ow and a ruu actually does flash everything back !
Give the main version and cid
Fastboot getvar version-main
Fastboot oem readcid
Click to expand...
Click to collapse
thank you very much now im rocking with stock jellybean:highfive:
Cool !
CASE CLOSED !
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
walkerx said:
i may need to return mine to stock due to wifi issues since moving to JB
my main version is 3.14.401.31
Am I ok to install OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.27-2.17.401.2
And then OTA_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R-3.14.401.27_release_302022
thanks in advance
Click to expand...
Click to collapse
No you need the full 3.14.401.31ruu instead of the ota. The 3.14.401.27 will not work because that one contains the 1.36 hboot and you are on the 1.39 hboot, downgrade is impossible
Are u on a unlocked bootloader and a custom recovery , then get your cid
Fastboot oem readcid
and download your matching nandroid here
http://forum.xda-developers.com/showthread.php?t=1975140
Do a full wipe, flash the boot.img from the nandroid and restore the nandroid .... Then flash back the stock 3.14 recovery .... and then relock the bootloader
Fastboot oem lock
That's the closest to stock you can get !
Hi,
Yes I am on unlocked bootloader with custom recovery
I've downloaded the file stock-nandroid-3.14.401.31.tar.bz2
I've managed to display the file contents
boot.emmc.win
boot.emmc.win.md5
data.ext3.win
data.ext3.win.md5
system.ext4.win
system.ext4.win.md5
would i be correct in saying i extract the boot.emmc.win from the file and then flash it
restore the nandroid from within twrp
flash boot-3.14.401.img
relock bootloader
would this then be suitable to send off to htc for repair?
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Mr Hofs said:
Flash the boot file as it is, you don't need to rename it
And yes that's all you can do :thumbup:
Don't forget to flash back the stock 3,14 recovery
Click to expand...
Click to collapse
flashed boot.emmc.win
extracted the files to clockworkmod\backup but when choose restore on twrp it says updating partitions and doesn't do anything
should the files be copied to twrp folder?
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Mr Hofs said:
Yes if the backup was done with twrp you can't restore it in the cwm folder. Don't know the exact paths of the twrp backup
Click to expand...
Click to collapse
thanks - i've installed CWM via fastboot and when attempt to restore get a md5 error
trying to get adb working on my machine so perform the md5sum check but always reports no devices - fastboot is fine
What i meant was that you can't restore a twrp backup with cwm at all, maybe there is a workaround but i don't know it, flash the twrp back and check in the backup collection thread if there is info about the twrp folders
Twrp backups are at /sdcard/TWRP/BACKUPS/[device serial]/[backup name]/
Sent from my One X
I unlock the bootloader quite easily this stuck screen happened when i tried to root my one x via insecureboot and root
Relocked
Endeavoru PVT SHIP S-ON RL
HBOOT-1.39.0000
CPLD-NONE
MICROP-NONE
RADIO-5. 1204. 163. 30
eMMC-BOOTMODE : disabled
CPU-bootmode : disabled
HW Secure boot : enabled
MODEM PATH : OFF
Dec 17 2012, 1:59:37
version-main: 3.19.709.2
cid: HTC__621
Help me please Im stuck
Running the full stock rom at this moment ?
Mr Hofs said:
Running the full stock rom at this moment ?
Click to expand...
Click to collapse
no my dear friend stuck on boot screen. help please it will apreciate it
I mean are you running the full stock rom ? I mean with that if the full stock rom is installed !
You can try a factory reset from the bootloader.....
annus9214 said:
no my dear friend stuck on boot screen. help please it will apreciate it
Click to expand...
Click to collapse
i was using stock rom before all of this !! and i want reinstall the stock rom
Mr Hofs said:
I mean are you running the full stock rom ? I mean with that if the full stock rom is installed !
You can try a factory reset from the bootloader.....
Click to expand...
Click to collapse
yeah I tried and still its stuck on boot screen then I install the custom recovery-clockwork-touch-5.8.4.0- and format everything and after that I reinstall the stock recovery and relocked my Hboot
Do a factory reset first. Check if it boot's the phone .....
If not you must unlock the bootloader again and restore a stock nandroid backup with a custom recovery
Mr Hofs said:
Do a factory reset first. Check if it boot's the phone .....
If not you must unlock the bootloader again and restore a stock nandroid backup with a custom recovery
Click to expand...
Click to collapse
factory rest done and its stuck on boot screen. would please recommend me the stock nandroid backup for my htc including links ??
Yes you must download this 3.14 nandroid backup
http://bugsylawson.com/files/file/194-cwm-nandroid-backup-cid-htc-621-31470920/
Restore it including flashing the boot.img from it. Then flash back the stock 3.14 stock recovery
http://db.tt/C1SWP2ZJ
After that you can update also with official ota
Mr Hofs said:
Yes you must download this 3.14 nandroid backup
http://bugsylawson.com/files/file/194-cwm-nandroid-backup-cid-htc-621-31470920/
Restore it including flashing the boot.img from it. Then flash back the stock 3.14 stock recovery
http://db.tt/C1SWP2ZJ
After that you can update also with official ota
Click to expand...
Click to collapse
Sir can u tell me step by step please ? what to do and how to do it
annus9214 said:
Sir can u tell me step by step please ? what to do and how to do it
Click to expand...
Click to collapse
I downloaded both files now tell me what to do step by step please
Unlock the bootloader
Flash a custom recovery
Mount the sdcard inside the recovery and unzip the nandroid backup to the right folder
Flash the boot.img from the bootloader
Make a full wipe in the recovery
Restore the nandroid backup
Read the OP from here, it contains all info on restoring the nandroid
http://forum.xda-developers.com/showthread.php?t=1975140 :thumbup:
Mr Hofs said:
Unlock the bootloader
Flash a custom recovery
Mount the sdcard inside the recovery and unzip the nandroid backup to the right folder
Flash the boot.img from the bootloader
Make a full wipe in the recovery
Restore the nandroid backup
Read the OP from here, it contains all info on restoring the nandroid
http://forum.xda-developers.com/showthread.php?t=1975140 :thumbup:
Click to expand...
Click to collapse
bro how to flash this boot.img ??
You mean from the nandroid backup ? At what point are you exactly....
Mr Hofs said:
You mean from the nandroid backup ? At what point are you exactly....
Click to expand...
Click to collapse
unlocked the bootloader !! which custom recovery which works absolutely fine ??
Flash this one
http://db.tt/z07vyksQ
It works fine. Just use the volume buttons and the power button to navigate in the menu's
Mr Hofs said:
Flash this one
http://db.tt/z07vyksQ
It works fine. Just use the volume buttons and the power button to navigate in the menu's
Click to expand...
Click to collapse
now im in recovey mode !! whats next ?
Now you need to follow the instructions given in the nandroid collection thread to restore your downloaded nandroid backup
Mr Hofs said:
Now you need to follow the instructions given in the nandroid collection thread to restore your downloaded nandroid backup
Click to expand...
Click to collapse
done with the restore phone boots and starts fine but it stuck on its unlock circle is not moving to setup my phone what to do now ??
volume button is working volume increase and decrease both !!
Hello,
I am currently trying to reset my HTC One X from Cyanogenmod 10.1 to the Stock ROM. I have HBOOT 1.39.0000, the Bootloader is relocked and its unbranded with a cid 102.
I am using Windows 8.
I already tried the following RUU versions:
RUU_ENDEAVOR_U_JB_45_S_HTC_Europe_3.14.401.31_R_Radio_5.1204.162.29_release_302015_signed
and
RUU_ENDEAVOR_U_ICS_40_S_HTC_Europe_2.17.401.2_Radio_2.1204.135.20_release_274900_signed
But i always get the Error 140, which tells me that something is wrong with my bootloader version.
What am i doing wrong?
Thank you.
Whats the outcome of
Fastboot getvar verion-main
Does it match the ruu number ? And did you relock the bootloader before running the ruu with admin rights ?
it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU
I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?
sunilson said:
it says: version main: 3.18.401.1
And yes i relocked the bootloader before starting the RUU
Click to expand...
Click to collapse
Go here : http://forum.xda-developers.com/showthread.php?t=1975140
Download the nandroid backup which matches your version-main and cid! and then restore it
---------- Post added at 06:39 PM ---------- Previous post was at 06:37 PM ----------
craoul said:
I have the same issue:
cid: HTC__032
version-main : 3.20.401.3
cannot go back to stock due to version beeing to high. Is there any other way?
Click to expand...
Click to collapse
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!
vin4yak said:
Try restoring the 3.20.401.1 backup for you CID?! Don't know if it will work or not!
Click to expand...
Click to collapse
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3
Mr Hofs said:
Yeah that works flash back the 3.14 stock recovery and you are also able to update again to 401.3
Click to expand...
Click to collapse
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware
craoul said:
I restored 3.20.401.3 but I do not know what is the stock recovery for this firmware
Click to expand...
Click to collapse
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
Nothing Here
The file you're looking for has been deleted or moved.
http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names
Mr Hofs said:
http://db.tt/pO3jumMa
Probably my old links. I had to re-organize my dropbox folders and names
Click to expand...
Click to collapse
Yeah!! I had bookmarked it :good:
vin4yak said:
Here you go!
https://www.dropbox.com/s/ms7vd18vb9watr8/stock recovery 3.14.img
Click to expand...
Click to collapse
OK, flashed recovery, but from fastboot if I chose recovery the phone just goes back to fast boot. How do I know that the recovery is flashed correctly ?
When the command window says OKEY
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
did you flash also boot.img and recovery.img?
steps are:
restore with nandroid
flash boot.img
flash recovery.img
lock or do not lock bootloader (this one is your choice)
sunilson said:
Ok so I now restored the Stock ROM with the Nandroid Backup and everything seems to work, except the touchscreen XD
The phone doesnt respond to my finger.
Did i do something wrong?
Click to expand...
Click to collapse
Did you wipe everything?
1. fastboot flash boot boot.img (The one from nandroid backup)
2. fastboot erase cache
3. Go to recovery and flash this : http://d-h.st/kG0
4. Now restore nandroid backup
5. Wipe cache/dalvc (Just in case)
6. Reboot.
for updates you need also the stock recovery
Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?
ntquartex said:
Is it possible to revert to 3.20.401.1 from 4.18.401.2 by using 3.20.401 nandroid backup?
If yes, what else to do with boot.img?
Click to expand...
Click to collapse
You have to flash boot.img from your nandroid backup after or before , restore the nandroid backup file.
hello i want to downgrade from lollipop as i dont like it i need the procedure for going back to complete factory state (when i first got phone) i am s-off/unlocked bootloader/rooted i also need the files to downgrade aswell thanks
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
modelid: 0P6B10000
cidnum: VODAP001
p1xel-cl0ck said:
hello i want to downgrade from lollipop as i dont like it i need the procedure for going back to complete factory state (when i first got phone) i am s-off/unlocked bootloader/rooted i also need the files to downgrade aswell thanks
version-bootloader: 3.19.0.0000
version-baseband: 1.25.214500021.06G
modelid: 0P6B10000
cidnum: VODAP001
Click to expand...
Click to collapse
Personally, I would flash a near stock ROM like MaximusHD. If you go back to actual stock, and downgrade, you will get notifications for software updates all the time.
xunholyx said:
Personally, I would flash a near stock ROM like MaximusHD. If you go back to actual stock, and downgrade, you will get notifications for software updates all the time.
Click to expand...
Click to collapse
thanks for the reply, as for the software update notifications i will be disabling them if thats possible, wish i hadnt of updated to lollipop should of just stuck with kitkat
xunholyx said:
Personally, I would flash a near stock ROM like MaximusHD. If you go back to actual stock, and downgrade, you will get notifications for software updates all the time.
Click to expand...
Click to collapse
p1xel-cl0ck said:
thanks for the reply, as for the software update notifications i will be disabling them if thats possible, wish i hadnt of updated to lollipop should of just stuck with kitkat
Click to expand...
Click to collapse
just read the other post you wrote, ruu.exe doesnt run on my windows 7 for some reason i need the ruu zip, from this do i just need to flash firmware not the nandroid?
TWRP 1.54.161.5 Nandroid backup : https://mega.co.nz/#!uAcGXQhI!McKrHJ...n-I7-RsqcmG6FE
Untouched 1.54.161.5 Firmware : https://mega.co.nz/#!HN9xBbYJ!9NTWJC...1asTeH7T7JMOzA
Stock 1.54.161.5 Recovery : https://mega.co.nz/#!6UE1yKJD!NMBPh2...CoNkcKZW5g0Y7g
p1xel-cl0ck said:
just read the other post you wrote, ruu.exe doesnt run on my windows 7 for some reason i need the ruu zip, from this do i just need to flash firmware not the nandroid?
TWRP 1.54.161.5 Nandroid backup : https://mega.co.nz/#!uAcGXQhI!McKrHJ...n-I7-RsqcmG6FE
Untouched 1.54.161.5 Firmware : https://mega.co.nz/#!HN9xBbYJ!9NTWJC...1asTeH7T7JMOzA
Stock 1.54.161.5 Recovery : https://mega.co.nz/#!6UE1yKJD!NMBPh2...CoNkcKZW5g0Y7g
Click to expand...
Click to collapse
You'll need the nandroid. You won't be able to run a Kit-Kat ROM with the old firmware. Plus you won't get the updates without the older ROM. Flash them all, then take the OTAs up until 4.4.4.
xunholyx said:
You'll need the nandroid. You won't be able to run a Kit-Kat ROM with the old firmware. Plus you won't get the updates without the older ROM. Flash them all, then take the OTAs up until 4.4.4.
Click to expand...
Click to collapse
no problem thank you very much for your help which one is best to flash first? sorry for the questions im new to this and want to learn :good:
xunholyx said:
You'll need the nandroid. You won't be able to run a Kit-Kat ROM with the old firmware. Plus you won't get the updates without the older ROM. Flash them all, then take the OTAs up until 4.4.4.
Click to expand...
Click to collapse
can i flash firmware and nandroid in recovery?
p1xel-cl0ck said:
can i flash firmware and nandroid in recovery?
Click to expand...
Click to collapse
No. You flash the nandroid by putting it into your TWRP backup folder, then restoring.
The firmware is flashed either through ADB/fastboot, or by renaming it to 0P6BIMG.zip, placing it onto the root of your extSD, and entering hboot.
The prompts will direct you (vol up to flash, power button to reboot.) That only will work with a firmware zip though. Not an .exe
xunholyx said:
You'll need the nandroid. You won't be able to run a Kit-Kat ROM with the old firmware. Plus you won't get the updates without the older ROM. Flash them all, then take the OTAs up until 4.4.4.
Click to expand...
Click to collapse
xunholyx said:
No. You flash the nandroid by putting it into your TWRP backup folder, then restoring.
The firmware is flashed either through ADB/fastboot, or by renaming it to 0P6BIMG.zip, placing it onto the root of your extSD, and entering hboot.
The prompts will direct you (vol up to flash, power button to reboot.) That only will work with a firmware zip though. Not an .exe
Click to expand...
Click to collapse
nandroid first then? or firmware first? thank you for sticking with me on this :highfive:
p1xel-cl0ck said:
nandroid first then? or firmware first? thank you for sticking with me on this :highfive:
Click to expand...
Click to collapse
Truthfully, I am unsure. I know what to do when you upgrade. Firmware first, then ROM (in this case nandroid). I don't know if it will really matter or not. Like I said, I am unfamiliar with reverting.
If it was me (once again, I haven't done this ~ It's just what I would try if it was me, from my thoughts about the process), I would do the opposite. Restore the nandroid first, then flash the older firmware.
xunholyx said:
Truthfully, I am unsure. I know what to do when you upgrade. Firmware first, then ROM (in this case nandroid). I don't know if it will really matter or not. Like I said, I am unfamiliar with reverting.
If it was me (once again, I haven't done this ~ It's just what I would try if it was me, from my thoughts about the process), I would do the opposite. Restore the nandroid first, then flash the older firmware.
Click to expand...
Click to collapse
no problem will try nandroid first then firmware
xunholyx said:
Truthfully, I am unsure. I know what to do when you upgrade. Firmware first, then ROM (in this case nandroid). I don't know if it will really matter or not. Like I said, I am unfamiliar with reverting.
If it was me (once again, I haven't done this ~ It's just what I would try if it was me, from my thoughts about the process), I would do the opposite. Restore the nandroid first, then flash the older firmware.
Click to expand...
Click to collapse
p1xel-cl0ck said:
no problem will try nandroid first then firmware
Click to expand...
Click to collapse
ok i know have red triangle with exclamation mark lol it flashed the firmware first from hboot, i can get into the stock recovery with blue writing
p1xel-cl0ck said:
ok i know have red triangle with exclamation mark lol it flashed the firmware first from hboot, i can get into the stock recovery with blue writing
Click to expand...
Click to collapse
1: flash the firmware twice in a row.....yes TWICE
2: Go into the bootloader and check the OS version number. If its downgraded to 1.54 its oke
3: flash the recovery which the nandroid backup is made with (probably a 2.7 based TWRP) and then RESTORE the nandroid backup from inside the CUSTOM recovery.
4: reboot
Mr Hofs said:
1: flash the firmware twice in a row.....yes TWICE
2: Go into the bootloader and check the OS version number. If its downgraded to 1.54 its oke
3: flash the recovery which the nandroid backup is made with (probably a 2.7 based TWRP) and then RESTORE the nandroid backup from inside the CUSTOM recovery.
4: reboot
Click to expand...
Click to collapse
ok so im in bootloader now thank god can i flash twrp from stock recovery or do it from command line?
p1xel-cl0ck said:
ok so im in bootloader now thank god can i flash twrp from stock recovery or do it from command line?
Click to expand...
Click to collapse
thank you so much for this im now in twrp recovery true legends in this forum
Mr Hofs said:
1: flash the firmware twice in a row.....yes TWICE
2: Go into the bootloader and check the OS version number. If its downgraded to 1.54 its oke
3: flash the recovery which the nandroid backup is made with (probably a 2.7 based TWRP) and then RESTORE the nandroid backup from inside the CUSTOM recovery.
4: reboot
Click to expand...
Click to collapse
ok when in bootloader it says os - nothing then when i change firmware to 0P6BIMG it says wrong zip in hboot
p1xel-cl0ck said:
ok when in bootloader it says os - nothing then when i change firmware to 0P6BIMG it says wrong zip in hboot
Click to expand...
Click to collapse
Flash the firmware via fastboot oem rebootruu mode !
Mr Hofs said:
Flash the firmware via fastboot oem rebootruu mode !
Click to expand...
Click to collapse
done that now os says 1.54 but when i flash recovery 2.7.0.2 using One_M8_All-In-One_Kit it no longer says os 1.54 plus when i was in twrp i couldnt restore the nandroid it wouldnt let me change the directory from internal storage to external sd card! windows wont show my internal storage and adb doesnt work
Mr Hofs said:
1: flash the firmware twice in a row.....yes TWICE
2: Go into the bootloader and check the OS version number. If its downgraded to 1.54 its oke
3: flash the recovery which the nandroid backup is made with (probably a 2.7 based TWRP) and then RESTORE the nandroid backup from inside the CUSTOM recovery.
4: reboot
Click to expand...
Click to collapse
would it be easier if i just flash a custom rom like maximus to get phone working again?
sorted thank you very @xunholyx @Mr Hofs