Develop Bugs

Sim Unlocking and Removing Activation Required from Sprint Torch 9850

It took a little playing around but I figured it out you will the following to get started:
Requirements:
Blackberry Torch 9850 from Sprint
MSL Code to your phone (buy at www.blackberryunlocking.us) same day return time
BlackBerry Torch 9850 from Sprint are SIM disabled by default meaning they are already unlocked for any GSM network if you want to edit and remove the Activation required message follow the instructions below
In previous Blackberry's you would enter ##000000 to get into the programming menu, This time RIM has made a small change instead of using 0 use your MSL code see below:
Solution
Press Talk Button
Type: "##3378473" <-- 3378473 is just an example MSL replace with your MSL code
Press Talk Button Again
Edit the Mobile Network # with yours (e.g 9999999999) 10 digits including your area code
Press Menu Blackberry Button
Select save
Phone will Say "write successful" and begin resetting.
Phone Activation required will not display after reset
Have Fun

Nokia Dial Pad Codes List (Some work'ish)

I found these codes used on the dial pad of Nokia phones. I've tried a couple but since I have no knowledge of them I figured I'd post them and hope a more experienced person could educate us. Enter code and hit call button. I highlighted the ones I tried with the results I experienced. All the messages displayed in top left corner via bubble box.
##634# installed the Diag app
##3282#- Field Test
Nokia Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type .
*#9999# Phones software version if *#0000# does not work.- neither code gave anything more then an error.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .- It works! Displays your phones IMEI #
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that "All Calls" are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.- When you enter code a message comes up stating " Service enabled " ,but I'm not sure what it does.
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to .
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible .- I'm interested in this but haven't tried it.
*#7760# Manufactures code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on "All Calls" diverting to the phone number entered.
**61*number# Turn on "No Reply" diverting to the phone number entered .
**67*number# Turn on "On Busy" diverting to the phone number entered .
12345 This is the default security code .
press and hold # Lets you switch between lines.
Click to expand...
Click to collapse

what does it means when i typed some code in and it said, " unexpected data value"?

Probably what is sounds like...you did something unexpected... ie.. the result was unexpected...
Its probably a generic error that is trying to say "I don't know what you did but stop that"

magicbullet said:
what does it means when i typed some code in and it said, " unexpected data value"?
Click to expand...
Click to collapse
You should not need to press dial to input the code. Mostly likely the code tried is not supported by the handset. That is a very generic list of Nokia codes, some will work and others will not.

I thought ##634# installed the Diag app. ##DATA# Just gives you cell info and tests.

Subscribed. Curious to see where this goes. Some of those codes look interesting and makes me wonder if there are any others

A lot of these don't work on ATT Lumia 900

So how do you get the "*" to work? Long pressed and typed in various ways.
Sent from my Lumia 900 using Board Express

DZ call barring locked, have PUK2, where to input?

Searched the forums and Google but found nothing.
I wanted to do some call barring and went to the settings. The phone asked for call barring password. I googled, it turned out it's supposed to be the PIN2. The default PIN2 (which I have never changed) for my operator is 1234. Didn't work. Then I tried 5678, didn't work. Then I tried 0000, didn't work and the call barring locked. Now all it says is "Invalid barring password. Locked. Please contact Customer Center."
I called HTC Finland, they said that call barring is all operator business, not theirs and that the call barring password should indeed be the PIN2. I then called my operator, they told me that if my PIN2 is locked, I need the PUK2, which they gave to me. I now have the PUK2 but where do I input it?

PIN2 is different from PIN, it's the SIM that locked, not your phone.
I met the same problem about ten or more yeas ago.
Go to the Service Center of your service provider, they can help you.

I now seriously doubt you read my post at all, so let me give you a recap:
I locked myself out of Call Barring
I called HTC, they said the Call Barring password is the PIN2
I called my service provider, they gave me the PUK2 to unlock my Call Barring password (the PIN2)
Where do I input the PUK2 to unlock the Call Barring password (the PIN2)?

Unlock sim

I need to unlock my sim (it's network blocked). I have tried asking my carrier service for the code, but they "don't know" where to get it and I also tried a third party unlock web page, but they haven't send me the unlock code, so if anyone knows if there is another way to unlock my sim it would be awesome if you could tell me how.

Add phone number to sim card?

I try to use Samsungs Private Share app and it gives me this error:
"You can't use Private Share because we can't read your phone number from your SIM, which we use as an ID. Contact the service provider for your SIM card and ask them to add your phone number to your SIM as the MSISDN."
I have talked to my phone operator 3 times and they tell me that the setup in their system looks good.
And when I look under "About phone" it says unknown phone number. I already got a new sim card, but no luck.
Any thoughts, guys?
Thank you in advance
/CK

I think it's a validation thingy, try this:
Open contacts, press the 3 dashesand select the gear on the top right (Settings on the contacts app).
Select "Share profile pictures"
It will ask youto activate profile sharing and will verify your number via SMS (kinda like 2 factor) after you do that the number will be verified and will appear on the phone settings.

Bomn said:
I think it's a validation thingy, try this:
Open contacts, press the 3 dashesand select the gear on the top right (Settings on the contacts app).
Select "Share profile pictures"
It will ask youto activate profile sharing and will verify your number via SMS (kinda like 2 factor) after you do that the number will be verified and will appear on the phone settings.
Click to expand...
Click to collapse
Didnt work for me, im using Note 20 Ultra Exynos. Sim 1 is ok, but my eSim phone number still unknown.

smartiescoke said:
Didnt work for me, im using Note 20 Ultra Exynos. Sim 1 is ok, but my eSim phone number still unknown.
Click to expand...
Click to collapse
Same with my s22 ultra. Esim number unknown. Sim 1 is ok. Please let me know if you find any solution

Try this.
Try clearing the data in Sim toolkit, network reset and clear the system cache from the boot menu.