Liquidsmooth v2.3 help please? - NFC Hacking

I've been using liquidsmooth for d2usc for about a month now and it's been smooth and stable until yesterday. I'm dropping frames very badly and it will reboot when I open certain apps. I've even overclocked it to the max to try and fix the problem but that doesn't help. I have to reboot into cwm recovery and wipe cache and it will run smoothly for a couple of hours and then start acting up again. Please help. I don't know what's wrong.!
Sent from my SCH-R530U using xda app-developers app

Miketdsk8r said:
I've been using liquidsmooth for d2usc for about a month now and it's been smooth and stable until yesterday. I'm dropping frames very badly and it will reboot when I open certain apps. I've even overclocked it to the max to try and fix the problem but that doesn't help. I have to reboot into cwm recovery and wipe cache and it will run smoothly for a couple of hours and then start acting up again. Please help. I don't know what's wrong.!
Sent from my SCH-R530U using xda app-developers app
Click to expand...
Click to collapse
I get the feeling you dont belong in NFC Hacking..

Related

[Q] blank white screen after bootaninmation on UNOFFICIAL]ParanoidAn

hello everyone bit of a newbie and need some assistance i've been flashing for a couple months now and want to give ParanoidAndroid a shot but every time i flash and reboot the boot animation comes up and then goes to a white screen and stays there. I do follow all the directions and have tried previous releases but always the same, I do use darkside superwipe and cache to clean before flashing and other roms I have no problem with.
any ideas would be greatly appreciated
paulrodgers34 said:
hello everyone bit of a newbie and need some assistance i've been flashing for a couple months now and want to give ParanoidAndroid a shot but every time i flash and reboot the boot animation comes up and then goes to a white screen and stays there. I do follow all the directions and have tried previous releases but always the same, I do use darkside superwipe and cache to clean before flashing and other roms I have no problem with.
any ideas would be greatly appreciated
Click to expand...
Click to collapse
The white screen is normal, try to wipe dalvick cache, fix permissions, if you are in cwm 6.X.X.X. If you are in cwm 5.X.X.X. try the dark side wipe.
Sent from my SGH-T989 using xda premium
I get the white screen too, but my phone still boots up. Make sure your fully wiping before you install. You'll always get the white screen until they realize to fix it but for now dw about it. Make sure you are waiting.. the first boot takes s while and we tend to get so excited that it feels so long. Time it and if it doesn't boot up after 5 minutes then you probably have a bad download or something
Sent from my SGH-T989 using xda premium
Thanks for the help I actually got it to finally boot up after doing a seperate dalvick wipe and fix permissions it booted and was looking badass then I went back to install my apps from my zip backup and it wouldn't go past the white screen again n I waited 20 minutes so I tried another fresh install and nothing I'm gonna keep trying though.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
paulrodgers34 said:
Thanks for the help I actually got it to finally boot up after doing a seperate dalvick wipe and fix permissions it booted and was looking badass then I went back to install my apps from my zip backup and it wouldn't go past the white screen again n I waited 20 minutes so I tried another fresh install and nothing I'm gonna keep trying though.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
For backing up apps I use rom toolbox and only restore apps not the data. If you get white screen, wipe cache dalvik and fix permissions again.
Sent from my SAMSUNG-SGH-T989 using xda premium
Finally got it to work by wipe cache, wipe dalvick & fix permissions every time I used dark side cache wipe it just sat there and did nothing but I'm up and running thanks everyone for all your help
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
paulrodgers34 said:
Finally got it to work by wipe cache, wipe dalvick & fix permissions every time I used dark side cache wipe it just sat there and did nothing but I'm up and running thanks everyone for all your help
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
If your are running 6.1.4 then no scripts are needed. Just do what you did every time you have issues
Sent from my SAMSUNG-SGH-T989 using xda premium

[Q] where can I get a stable JB 4.1 for CWM T989!

I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...
PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app
With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app
I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD
Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app
LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for
Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?
That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium

[Q] Stability - 4.1.2 Stock JB Skyrocket Leak on T989

Long time lurker, 1st post!
I'm wondering did anyone else see frequent freezing and reboots on the Herc with the latest odexed version of mohan's leak? It seems like everyone else ran like cake despite some known issues with the earlier versions. http://forum.xda-developers.com/showthread.php?t=2064513
[edit] This was my first time rooting or flashing anything on this particular phone, just been on the latest ICS from Kies.
Before you ask, I read all posts very carefully and made sure the files I used had been tested and were good 2 go. These are the steps I took in order.
1) flashed CWM with Odin
2)nandroid
3)rooting with 3.1.3 ChainsDD SU
4)wipe /data, /system, /cache, and dalvik thoroughly
5) flash the odexed ROM
6)flashed Blaze LB7 (after a reboot and playing around in JB)
It was fine for a few hours until I restored everything with Titanium backup. The next day it was progressively worse until I got home and every 5 - 10 minutes, freeze, reboot. I tried wiping /data, /cache, and dalvik a few times...nothing. I decided to try flashing the deodexed, but I wanted to try touch CWM, so I flashed 6.0.1.5 I believe and then was unable to unmount or wipe /cache. The process would just freeze my recovery, sometimes with a reboot after about 10 mins. Other times touch recovery would freeze while navigating and shut down. At some point it wouldn't get past the AT&T splash screen, would just go dark, and no reboot (at least not within the 20 or so secs I waited). It finally booted and I was able to dl ROM Manager and flash non-touch CWM 6.0.2.7 from there. I was still unable to wipe /cache, but went ahead wiped everything else and flashed the deodexed ROM along with root, Blaze LB7, and rotation fix. A full 24 hours later (restored all apps and froze the AT&T bloat with TB) and I've been running as close to perfect as can be ever since. WTF? Not one freeze or random reboot, while I did get some crazy graphics artifacts in the system menu once. No idea what that's about. Also, the official Twitter app doesn't save my log in info between reboots and app preferences are not saved so I have to choose the default app for an action every time.
Update: The graphic glitches got worse. I've since broken my phone and flashed the Odexed on the replacement. Running fine, but still getting the graphics glitches. Swype will not save the dictionary or allow new entries after the first reboot.
bump for edit
What version of Swype are you using?
Sent from my SAMSUNG-SGH-T989 using xda premium
Version 1.3.9.11092
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Is this working on shv-e110s?
Sent from my SAMSUNG-SHV-E110S using xda app-developers app
No, Hercules and Skyrocket only.
SGH-T989
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
100Percen% said:
No, Hercules and Skyrocket only.
SGH-T989
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Why is that? :/
Sent from my SAMSUNG-SHV-E110S using xda app-developers app
I had an unbearable increase in random reboots and I am now running Embryo 6.8. This thread can be closed.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

CyanogenModCM 10.1 Nightly and AOKP Feb 18 Build?

Hey guys between this two builds i want to know what's the difference?? Cause i really don't see it. Maybe some tweaks or settings?
Can you guys explain to me which one is better and why?
daworship said:
Hey guys between this two builds i want to know what's the difference?? Cause i really don't see it. Maybe some tweaks or settings?
Can you guys explain to me which one is better and why?
Click to expand...
Click to collapse
Whichever one works better for you. There are different customizations for each ROM, but it's up to you to decide which one works better for your needs.
Sent from my Samsung SGH-T989D using xda premium
I keep getting stuck in a boot loop with all the updates of 10.1 Nightly, the only one I didn't get looped in was the original. I even did a full wipe and everything, help anyone?
kvarug01 said:
I keep getting stuck in a boot loop with all the updates of 10.1 Nightly, the only one I didn't get looped in was the original. I even did a full wipe and everything, help anyone?
Click to expand...
Click to collapse
I never have that issue even with dirty flash. Have you tried to wipe system, data, everything? I think you can try to Odin back to stock, then root it and start everything fresh. Sometimes the old files are still left over and mess up your phone.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Alarmmy said:
I never have that issue even with dirty flash. Have you tried to wipe system, data, everything? I think you can try to Odin back to stock, then root it and start everything fresh. Sometimes the old files are still left over and mess up your phone.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The sad thing is, that's all I've been doing. Using Odin and keep going back to stock, update to ICS with Kies, and then hope to try and run another version of the ROM, and still no luck. It's quite frustrating. And yeah, I wiped system, data, everything. Did a full on wipe.
Also, has anyone have been getting call issues? Like you sound muzzled to your callers?
kvarug01 said:
Also, has anyone have been getting call issues? Like you sound muzzled to your callers?
Click to expand...
Click to collapse
Here is solution for your issue:
1. Upgrade recovery, or switch to TWRP.
2. Clean flash rom again.
3. Flash the newest radio UVLI4, or LI1.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Download darkside super wipe.zip ...flash it and then flash your rom+gapps... Hit thanks
Sent from my SGH-I897 using xda premium
sam.balia1012 said:
Download darkside super wipe.zip ...flash it and then flash your rom+gapps... Hit thanks
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
DO NOT do that if you are on the latest TWRP or CWM 6.+ cause Darkside super wipe was discontinued. For AOKP and CM 10.1 Nightly I just did a data/partition wipe and flash gapps.

[Q] Why does a battery pull kill my stock rooted 4.1.2 SGH-T989 UVMC6 ???? [SOLVED]

If you are running stock rooted 4.1.2 UVMC6 on a SGH-t989, pull out your battery while the phone is on. Now, can you get past the 4G screen? If you can, is everything now FC on you?
This is frustrating. It seems all runs SO PERFECTLY. Until I pull my battery on the stock rooted 4.1.2. Then my phone will not boot or will not boot properly.
Anyone else have this?
*edit* Jamison's Infamous CACHE wipe fixed it. I ran the cache wipe script under TWRP. The phone rebooted itself. I waited a few minutes and it worked!!!
Get the script here!
http://forum.xda-developers.com/showthread.php?t=2235141
Thank you minlo!
Not happening on Infamous rom which is stocked tweaked and built by Jamison....
Did you this tool, idk if its the fix but possibly
http://forum.xda-developers.com/showthread.php?t=2235141
Such she rooted. No custom roms no problem
Sent from my SGH-T989 using xda app-developers app
minlo said:
Not happening on Infamous rom which is stocked tweaked and built by Jamison....
Did you this tool, idk if its the fix but possibly
http://forum.xda-developers.com/showthread.php?t=2235141
Click to expand...
Click to collapse
I'll try this next time. I'm tired of restoring my phone just to have it randomly die. A few days later.
This time I restored with the stock rooted deodexed rom and not ODIN. Maybe it'll keep working...
Funny thing though. The ODIN stock for SGH-t989 works GREAT (minus one wierd FC ridden boot that fixed itself) on my wife's SGH-i727 Skyrocket. WiFi calling and all.
Sent from my SGH-T989 using Tapatalk 2
Why are do doing a battery pull? You can't power off normally? If the phone is freezing just hold the power button in for about ten seconds, and it will do a reboot no matter what it's frozen on. Then when it reboots you can do a normal reboot or power off.
minlo said:
Not happening on Infamous rom which is stocked tweaked and built by Jamison....
Did you this tool, idk if its the fix but possibly
http://forum.xda-developers.com/showthread.php?t=2235141
Click to expand...
Click to collapse
Thank you for the link! Finally fixed my problem with bootloops after flashing supersu
Sent from my SGH-T989 using xda premium
Been having the same issues, sometimes it fixes it self. ill have to try the superwipe next time i have an issue.
Just hold the power button and wait for it to restart, it should work fine
Koragg618 said:
Just hold the power button and wait for it to restart, it should work fine
Click to expand...
Click to collapse
Thats where it runs into problems. I get to the 4G screen and 99% on the loading bar. Then it just stays there no matter what. Battery pull. Power button reset. Nothing. Oh well. I installed the stock rooted rom and now do frequent nand backups. Haven't had a problem so far... I've tucked the cache wipe script on my sd card just in case...
Sent from my SGH-T989 using Tapatalk 2
ackliph said:
Thats where it runs into problems. I get to the 4G screen and 99% on the loading bar. Then it just stays there no matter what. Battery pull. Power button reset. Nothing. Oh well. I installed the stock rooted rom and now do frequent nand backups. Haven't had a problem so far... I've tucked the cache wipe script on my sd card just in case...
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
It takes time to boot sometimes. I've waited around 10 - 15 minutes for it to get past the loading screen. I don't know if it's device related or update related but either way just give it some time your next go
Sent from my SGH-T989 using xda premium
this happens to me too using jedi mind trick X3 rom and the new jedi mind t X4 rom. stock wifi calling.
I fought through this problem too. Tried multiple recoverys and ROMs.
Superwipe/cachewiped using twrp - boots perfectly...
Sent from my SGH-T989 using xda app-developers app
I had the issue today. I ran the cache wipe and it fixed it! I'll edit my op for people searching this.
Sent from my SGH-T989 using Tapatalk 2

Categories

Resources