I have rooted and flash jb 4.2.2 by cyanogenmod on my device. I wanted to flash stock rom as I wanted to sell my device but when i tried to install, it says cant open installation aborted. Pls help me. Sorry for poor english.
INEEDHELPPLSHELP said:
I have rooted and flash jb 4.2.2 by cyanogenmod on my device. I wanted to flash stock rom as I wanted to sell my device but when i tried to install, it says cant open installation aborted. Pls help me. Sorry for poor english.
Click to expand...
Click to collapse
Flash stock rom via odin.
Go to sammobile download w firmware
Get proper odin and ancora ops
And flash it
Sent from my GT-I9300 using xda premium
Related
Hi, I'm trying to flash back to stock ROM as cant seem to find a stable custom ROM. Every time I try to update with the .zip file I get error saying bad zip.
Thinking it is probably the ROM I am downloading can anyone upload a stock ROM for vodafone.
Thanks
Check out this...
http://forum.xda-developers.com/showthread.php?t=1426611
Sent from my HTC Wildfire S using XDA App
Cheer's will give that a try.
Hello, i have a trouble.
i am using toolkit.
i rooted my nexus and flash CWM
my phone is yakiu 4.1.2 but i want flash the takiu officials 4.2 rom
when flashing rom, "signature verification failed" and the installation aborted.
can you help me solve it?:crying::crying:
I think you need to flash takju 4.1.2 stock first and then flash 4.2 update
Sent from my Galaxy Nexus
neelabh75 said:
I think you need to flash takju 4.1.2 stock first and then flash 4.2 update
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
LINK? can you give the link for me?~___~
i am noobs
timli123 said:
LINK? can you give the link for me?~___~
i am noobs
Click to expand...
Click to collapse
no need to flash stock 4.1.2 takju...just download takju 4.2 from this link - https://developers.google.com/android/nexus/images
Put the file in "put_google_factory_image_here" folder and select option 9 on the toolkit
Yeah, if you're going to flash the stock 4.1.2 anyway, might as well skip it and flash the stock 4.2 directly
timli123 said:
Hello, i have a trouble.
i am using toolkit.
i rooted my nexus and flash CWM
my phone is yakiu 4.1.2 but i want flash the takiu officials 4.2 rom
when flashing rom, "signature verification failed" and the installation aborted.
can you help me solve it?:crying::crying:
Click to expand...
Click to collapse
Where did you download the file from?? Not sure if this would help - but did you check the checksum/MD5?
Lots of things come to mind. Did you lock the bootloader after flashing cwm? Are you sure you're trying to flash a zip file in cwm? .img files should be flashed through fastboot while booted into bootloader. Like another said the easiest way would be to fastboot the takju 4.2 images.
Sent from my Galaxy Nexus using xda premium
Hello Guys ..I have a Galaxy S3 SGH-I747 i was running on Cyanogenmod CM11 i decided to get back to stock firmware so i can get official android 4.3 update OTA ...but when i flashed the stock firmware the phone doesn't start up it stops at samsung logo ...please help me what should i do to fix this
ibulp said:
Hello Guys ..I have a Galaxy S3 SGH-I747 i was running on Cyanogenmod CM11 i decided to get back to stock firmware so i can get official android 4.3 update OTA ...but when i flashed the stock firmware the phone doesn't start up it stops at samsung logo ...please help me what should i do to fix this
Click to expand...
Click to collapse
Did you flash the correct bootloader modem for 4.3?
Warrior1988 said:
Did you flash the correct bootloader modem for 4.3?
Click to expand...
Click to collapse
I flashed the official ATT android 4.1 it's MD5 file doesn't come with bootloader ,,, i will get the 4.3 over the air after 4.1.1 but i did wiped the cashe and format the system and everything else
ibulp said:
I flashed the official ATT android 4.1 it's MD5 file doesn't come with bootloader ,,, i will get the 4.3 over the air after 4.1.1 but i did wiped the cashe and format the system and everything else
Click to expand...
Click to collapse
use 4.1.2 then go to 4.3
Warrior1988 said:
use 4.1.2 then go to 4.3
Click to expand...
Click to collapse
I'm stock the phone doesn't start and it doesn't have the recovery mod the only thing it has now is download mod so i need something like an MD5 file ....please can u help me or bring me anything that can be flashed with odin
ibulp said:
I'm stock the phone doesn't start and it doesn't have the recovery mod the only thing it has now is download mod so i need something like an MD5 file ....please can u help me or bring me anything that can be flashed with odin
Click to expand...
Click to collapse
Go here and pick correct carrier.
Warrior1988 said:
Go here and pick correct carrier.
Click to expand...
Click to collapse
now i can get into recovery mode but whatever i try to install it gives me error installation aborted and in RED it says signature verification failed
Just for the record i tried to enter the recovery mod and i wiped the cache and user data plus factory setting then tried to install it again this time it worked
Thanks to Warrior1988
Hello All,
I have Samsung Galaxy Ace II. First, I have upgraded my phone to 4.1.2 jb. Then secondly, I upgraded my phone to 4.3. Now it's version is 4.4.2 kitkat. But, I see now it's really slower then 4.3. It's completely driving me crazy. And I don't know how to downgrade my phone to 4.3. I have tried lots of things but couldn't handle it. I would be really appriciated if someone can help me about downgrading 4.4.2 to 4.3.
Thank you all,
Can.
Most easy and safe way is to flash stock 3 part, 4.1.2 firm. After that flash what you want with cwm.
Sent from my GT-I8160 using Tapatalk 2
forbidden8 said:
Most easy and safe way is to flash stock 3 part, 4.1.2 firm. After that flash what you want with cwm.
Sent from my GT-I8160 using Tapatalk 2
Click to expand...
Click to collapse
Thank you for your reply, but it seems you don't get what I am saying my android version is 4.4 and i want to downgrade it to 4.3. if you can help with that, I will be appriciated. thank you again.
Install temporary cwm from built-in cm 11 recovery, then flash cm 10.2 using temporary cwm
Rox said:
Install temporary cwm from built-in cm 11 recovery, then flash cm 10.2 using temporary cwm
Click to expand...
Click to collapse
cwm6.zip can't mount the external SD if launched from the swipe enabled CWM for 4.4...
Use ODIN to flash the stock rom and then you can flash the 4.3 rom you want with a temp. CWM
good luck
next time, when you want to go back to kit kat again, make sure you already backup your previous non kit kat rom (either CM 10 -10.2 or JB stock) via CWM so that you can return to your previous rom from kit kat. I use this method and succesful
I'm going to sell this phone so i need to get back to stock gingerbread. Can i flash it with Odin directly from 4.4.2 maclaw kitkat that i'm on now?
Also this will unroot my phone after installing gb, right? And then the only thing left to do is reset the flash counter so the warranty is still valid.
Mihart said:
I'm going to sell this phone so i need to get back to stock gingerbread. Can i flash it with Odin directly from 4.4.2 maclaw kitkat that i'm on now?
Also this will unroot my phone after installing gb, right? And then the only thing left to do is reset the flash counter so the warranty is still valid.
Click to expand...
Click to collapse
Yes, you can... with pit.
Sent from my GT-I8160 using Tapatalk
@Rox: how do you access the built-in recovery in CM11?
(I'm having a similar issue, "assert failed" error when trying to flash canjica's cm10.1 & 10.2 or aosp4.2.2. Running maclaw cm, cwm 6.0.4.5)
That is normal recovery that comes with cm 11.
Just boot to recovery, flash temporary cwm, then cm 10.1/2
Sent from my GT-I8160
Tried with temporary cwm6.0.2.8, same result! Any ideas? Thanks!
erdol said:
Tried with temporary cwm6.0.2.8, same result! Any ideas? Thanks!
Click to expand...
Click to collapse
Try delete assert in updater-script
Sent from my GT-I8160 using Tapatalk
teddytsen said:
Try delete assert in updater-script
Click to expand...
Click to collapse
That worked, thanks!
i had updated to the latest stock firmware with 97mb update that came from ota...it was too much laggy so i installed gennxt rom ..still it lags too much what to do please help tried custom kernal also...please suggest me some other rom which is stasble not the kitkat ones as they are not stable yet and dont have dual simm....please help urgent.......!!??
shubhamverma27 said:
i had updated to the latest stock firmware with 97mb update that came from ota...it was too much laggy so i installed gennxt rom ..still it lags too much what to do please help tried custom kernal also...please suggest me some other rom which is stasble not the kitkat ones as they are not stable yet and dont have dual simm....please help urgent.......!!??
Click to expand...
Click to collapse
Flash your device with stock 4.1.2 via Odin and then flash a version of 4.2.2 which is prior to the 97mb update. Then you can use GENNXT or Pyramid K3 which are TW based ROMS
Kitkat based ROMs are stable upto a mark but not bug free. CM11, CosmicCM and IOS 7 Aspiration have dual SIM with small bugs.
DMJoh said:
Flash your device with stock 4.1.2 via Odin and then flash a version of 4.2.2 which is prior to the 97mb update. Then you can use GENNXT or Pyramid K3 which are TW based ROMS
Kitkat based ROMs are stable upto a mark but not bug free. CM11, CosmicCM and IOS 7 Aspiration have dual SIM with small bugs.
Click to expand...
Click to collapse
i cant find the indian 4.1.2 rom on sammobile only 4.2.2 is available and please give instructions on how to flash thru odin??
2. and will flashing that rom delete cwm too or it will remain..??
shubhamverma27 said:
i cant find the indian 4.1.2 rom on sammobile only 4.2.2 is available and please give instructions on how to flash thru odin??
2. and will flashing that rom delete cwm too or it will remain..??
Click to expand...
Click to collapse
Check Samsung updates .com
Regarding flashing via odin if its 1 file .tar file than select PDA in odin select .tar file it will use approx 1GB..tick Auto reboot F reset before see COM icon and status If connected properly it will show added then go to the download mode (POWER+VOLDOWN+HOME BUTTON) then again volume up to continue and then start flashing...
2) after flashing CWM will be removed and even root access. .
Sent from my GT-I9082 using XDA Premium 4 mobile app
shubhamverma27 said:
i cant find the indian 4.1.2 rom on sammobile only 4.2.2 is available and please give instructions on how to flash thru odin??
2. and will flashing that rom delete cwm too or it will remain..??
Click to expand...
Click to collapse
Use any 4.1.2 firmware, then flash Indian 4.2.2 firmware later
black87 said:
Use any 4.1.2 firmware, then flash Indian 4.2.2 firmware later
Click to expand...
Click to collapse
can i flash the stock 4.2.2 from cwm i have flashed 4.1.2 (found the indian version).....or that too has too be flashed from odin???
shubhamverma27 said:
can i flash the stock 4.2.2 from cwm i have flashed 4.1.2 (found the indian version).....or that too has too be flashed from odin???
Click to expand...
Click to collapse
You have to flash it via odin
custom rom
My contacts will be deleted if I use any custom roms? How to know my phone data is back up? After flashing I have to delete that back up or keep like that only, bcoz yesterday 4gb was available I don't know, today space 0mb available?? Please reply don't get pissed off, am new to this forum and rooting
doc_shri said:
My contacts will be deleted if I use any custom roms? How to know my phone data is back up? After flashing I have to delete that back up or keep like that only, bcoz yesterday 4gb was available I don't know, today space 0mb available?? Please reply don't get pissed off, am new to this forum and rooting
Click to expand...
Click to collapse
So, installing a custom ROM won't delete your contacts, but a factory wipe which is essential before installing a custom ROM will erase your contacts. So you should keep a back up for future use. I am not explaining how to do that. Also if you need to revert back to the stock ROM u use now you can create a Nandroid backup to external SD card, also just in case if u mess up with installation. Most importantly you need to backup your EFS partition. You should keep this backup for ever, because its necessary if you lose your IMEI number.
And all about keeping data after flashing, its your wish, if u want the data, keep it or delete it. And to know if the data is backed up, see the app u use to backup or check the storage to which u backup.
Sent from my GT-I9082 using XDA Premium 4 mobile app